Skip to contentSkip to conversation

fnic: use scsi_host_busy_iter() to traverse commands

PATCH In review Hannes Reinecke 4 participants 12 messages Apr 29, 2021 – May 4, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover fnic: use scsi_host_busy_iter() to traverse commands

Hi all,

the fnic driver is walking the list of tags manually, causing frequent crashes as the block layer doesn't necessarily cleans up requests after usage.
So switch to scsi_host_busy_iter() to traverse commands avoiding this problem.

As usual, comments and reviews are welcome.

Hannes Reinecke (3):
fnic: kill 'exclude_id' argument to fnic_cleanup_io()
fnic: use scsi_host_busy_iter() to traverse commands
fnic: check for started requests in fnic_wq_copy_cleanup_handler()

 drivers/scsi/fnic/fnic_scsi.c | 830 ++++++++++++++++------------------
 1 file changed, 378 insertions(+), 452 deletions(-)
Signature · 1 line
2.29.2
#1 lore raw

PATCH 1/3 fnic: kill 'exclude_id' argument to fnic_cleanup_io()

'exclude_id' is always SCSI_NO_TAG, which will never be reached when traversing the list of tags.

---
 drivers/scsi/fnic/fnic_scsi.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/scsi/fnic/fnic_scsi.c +3 -6
index e619a82f921b..f41d1b1c2e39 100644
@@ -102,7 +102,7 @@ static const char *fnic_fcpio_status_to_str(unsigned int status)
 	return fcpio_status_str[status];
 }
 
-static void fnic_cleanup_io(struct fnic *fnic, int exclude_id);
+static void fnic_cleanup_io(struct fnic *fnic);
 
 static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
 					    struct scsi_cmnd *sc)
@@ -638,7 +638,7 @@ static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
 	atomic64_inc(&reset_stats->fw_reset_completions);
 
 	/* Clean up all outstanding io requests */
-	fnic_cleanup_io(fnic, SCSI_NO_TAG);
+	fnic_cleanup_io(fnic);
 
 	atomic64_set(&fnic->fnic_stats.fw_stats.active_fw_reqs, 0);
 	atomic64_set(&fnic->fnic_stats.io_stats.active_ios, 0);
@@ -1361,7 +1361,7 @@ int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
 	return wq_work_done;
 }
 
-static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
+static void fnic_cleanup_io(struct fnic *fnic)
 {
 	int i;
 	struct fnic_io_req *io_req;
@@ -1372,9 +1372,6 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
 	struct fnic_stats *fnic_stats = &fnic->fnic_stats;
 
 	for (i = 0; i < fnic->fnic_max_tag_id; i++) {
-		if (i == exclude_id)
-			continue;
-
 		io_lock = fnic_io_lock_tag(fnic, i);
 		spin_lock_irqsave(io_lock, flags);
 		sc = scsi_host_find_tag(fnic->lport->host, i);
Signature · 1 line
2.29.2
Reviewed-by on v1 1/3
#2 lore raw

Re: [PATCH 1/3] fnic: kill 'exclude_id' argument to fnic_cleanup_io()

Quoted 52 lines · Hannes Reinecke

'exclude_id' is always SCSI_NO_TAG, which will never be reached when traversing the list of tags.

---
 drivers/scsi/fnic/fnic_scsi.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/scsi/fnic/fnic_scsi.c +3 -6
index e619a82f921b..f41d1b1c2e39 100644
@@ -102,7 +102,7 @@ static const char *fnic_fcpio_status_to_str(unsigned int status)
 	return fcpio_status_str[status];
 }
 
-static void fnic_cleanup_io(struct fnic *fnic, int exclude_id);
+static void fnic_cleanup_io(struct fnic *fnic);
 
 static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
 					    struct scsi_cmnd *sc)
@@ -638,7 +638,7 @@ static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
 	atomic64_inc(&reset_stats->fw_reset_completions);
 
 	/* Clean up all outstanding io requests */
-	fnic_cleanup_io(fnic, SCSI_NO_TAG);
+	fnic_cleanup_io(fnic);
 
 	atomic64_set(&fnic->fnic_stats.fw_stats.active_fw_reqs, 0);
 	atomic64_set(&fnic->fnic_stats.io_stats.active_ios, 0);
@@ -1361,7 +1361,7 @@ int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
 	return wq_work_done;
 }
 
-static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
+static void fnic_cleanup_io(struct fnic *fnic)
 {
 	int i;
 	struct fnic_io_req *io_req;
@@ -1372,9 +1372,6 @@ static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
 	struct fnic_stats *fnic_stats = &fnic->fnic_stats;
 
 	for (i = 0; i < fnic->fnic_max_tag_id; i++) {
-		if (i == exclude_id)
-			continue;
-
 		io_lock = fnic_io_lock_tag(fnic, i);
 		spin_lock_irqsave(io_lock, flags);
 		sc = scsi_host_find_tag(fnic->lport->host, i);
Signature · 1 line
2.29.2
Signature · 1 line
Ming
#3 lore raw

PATCH 2/3 fnic: use scsi_host_busy_iter() to traverse commands

In reply to Hannes Reinecke

Use scsi_host_busy_iter() to traverse commands instead of hand-crafted routines walking the command list.

---
 drivers/scsi/fnic/fnic_scsi.c | 821 ++++++++++++++++------------------
 1 file changed, 375 insertions(+), 446 deletions(-)
drivers/scsi/fnic/fnic_scsi.c +375 -446
index f41d1b1c2e39..762cc8bd2653 100644
@@ -1361,90 +1361,90 @@ int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
 	return wq_work_done;
 }
 
-static void fnic_cleanup_io(struct fnic *fnic)
+static bool fnic_cleanup_io_iter(struct scsi_cmnd *sc, void *data,
+				 bool reserved)
 {
-	int i;
+	struct fnic *fnic = data;
 	struct fnic_io_req *io_req;
 	unsigned long flags = 0;
-	struct scsi_cmnd *sc;
 	spinlock_t *io_lock;
 	unsigned long start_time = 0;
 	struct fnic_stats *fnic_stats = &fnic->fnic_stats;
 
-	for (i = 0; i < fnic->fnic_max_tag_id; i++) {
-		io_lock = fnic_io_lock_tag(fnic, i);
-		spin_lock_irqsave(io_lock, flags);
-		sc = scsi_host_find_tag(fnic->lport->host, i);
-		if (!sc) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-
-		io_req = (struct fnic_io_req *)CMD_SP(sc);
-		if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
-			!(CMD_FLAGS(sc) & FNIC_DEV_RST_DONE)) {
-			/*
-			 * We will be here only when FW completes reset
-			 * without sending completions for outstanding ios.
-			 */
-			CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE;
-			if (io_req && io_req->dr_done)
-				complete(io_req->dr_done);
-			else if (io_req && io_req->abts_done)
-				complete(io_req->abts_done);
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		} else if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-		if (!io_req) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-
-		CMD_SP(sc) = NULL;
-
-		spin_unlock_irqrestore(io_lock, flags);
+	io_lock = fnic_io_lock_tag(fnic, sc->request->tag);
+	spin_lock_irqsave(io_lock, flags);
 
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
+	    !(CMD_FLAGS(sc) & FNIC_DEV_RST_DONE)) {
 		/*
-		 * If there is a scsi_cmnd associated with this io_req, then
-		 * free the corresponding state
+		 * We will be here only when FW completes reset
+		 * without sending completions for outstanding ios.
 		 */
-		start_time = io_req->start_time;
-		fnic_release_ioreq_buf(fnic, io_req, sc);
-		mempool_free(io_req, fnic->io_req_pool);
+		CMD_FLAGS(sc) |= FNIC_DEV_RST_DONE;
+		if (io_req && io_req->dr_done)
+			complete(io_req->dr_done);
+		else if (io_req && io_req->abts_done)
+			complete(io_req->abts_done);
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	} else if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		goto cleanup_scsi_cmd;
+	}
 
-		sc->result = DID_TRANSPORT_DISRUPTED << 16;
-		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-			      "%s: tag:0x%x : sc:0x%p duration = %lu DID_TRANSPORT_DISRUPTED\n",
-			      __func__, sc->request->tag, sc,
-			      (jiffies - start_time));
+	CMD_SP(sc) = NULL;
 
-		if (atomic64_read(&fnic->io_cmpl_skip))
-			atomic64_dec(&fnic->io_cmpl_skip);
-		else
-			atomic64_inc(&fnic_stats->io_stats.io_completions);
+	spin_unlock_irqrestore(io_lock, flags);
 
-		/* Complete the command to SCSI */
-		if (sc->scsi_done) {
-			if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED))
-				shost_printk(KERN_ERR, fnic->lport->host,
-				"Calling done for IO not issued to fw: tag:0x%x sc:0x%p\n",
-				 sc->request->tag, sc);
+	/*
+	 * If there is a scsi_cmnd associated with this io_req, then
+	 * free the corresponding state
+	 */
+	start_time = io_req->start_time;
+	fnic_release_ioreq_buf(fnic, io_req, sc);
+	mempool_free(io_req, fnic->io_req_pool);
 
-			FNIC_TRACE(fnic_cleanup_io,
-				  sc->device->host->host_no, i, sc,
-				  jiffies_to_msecs(jiffies - start_time),
-				  0, ((u64)sc->cmnd[0] << 32 |
-				  (u64)sc->cmnd[2] << 24 |
-				  (u64)sc->cmnd[3] << 16 |
-				  (u64)sc->cmnd[4] << 8 | sc->cmnd[5]),
-				  (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+cleanup_scsi_cmd:
+	sc->result = DID_TRANSPORT_DISRUPTED << 16;
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "fnic_cleanup_io: tag:0x%x : sc:0x%p duration = %lu DID_TRANSPORT_DISRUPTED\n",
+		      sc->request->tag, sc, (jiffies - start_time));
 
-			sc->scsi_done(sc);
-		}
+	if (atomic64_read(&fnic->io_cmpl_skip))
+		atomic64_dec(&fnic->io_cmpl_skip);
+	else
+		atomic64_inc(&fnic_stats->io_stats.io_completions);
+
+	/* Complete the command to SCSI */
+	if (sc->scsi_done) {
+		if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED))
+			shost_printk(KERN_ERR, fnic->lport->host,
+				     "Calling done for IO not issued to fw: tag:0x%x sc:0x%p\n",
+				     sc->request->tag, sc);
+
+		FNIC_TRACE(fnic_cleanup_io,
+			   sc->device->host->host_no, sc->request->tag, sc,
+			   jiffies_to_msecs(jiffies - start_time),
+			   0, ((u64)sc->cmnd[0] << 32 |
+			       (u64)sc->cmnd[2] << 24 |
+			       (u64)sc->cmnd[3] << 16 |
+			       (u64)sc->cmnd[4] << 8 | sc->cmnd[5]),
+			   (((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
+
+		sc->scsi_done(sc);
 	}
+	return true;
+}
+
+static void fnic_cleanup_io(struct fnic *fnic)
+{
+	scsi_host_busy_iter(fnic->lport->host,
+			    fnic_cleanup_io_iter, fnic);
 }
 
 void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
@@ -1555,143 +1555,141 @@ static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
 	return 0;
 }
 
-static void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
+struct fnic_rport_abort_io_iter_data {
+	struct fnic *fnic;
+	u32 port_id;
+	int term_cnt;
+};
+
+static bool fnic_rport_abort_io_iter(struct scsi_cmnd *sc, void *data,
+				     bool reserved)
 {
-	int tag;
-	int abt_tag;
-	int term_cnt = 0;
+	struct fnic_rport_abort_io_iter_data *iter_data = data;
+	struct fnic *fnic = iter_data->fnic;
+	int abt_tag = sc->request->tag;
 	struct fnic_io_req *io_req;
 	spinlock_t *io_lock;
 	unsigned long flags;
-	struct scsi_cmnd *sc;
 	struct reset_stats *reset_stats = &fnic->fnic_stats.reset_stats;
 	struct terminate_stats *term_stats = &fnic->fnic_stats.term_stats;
 	struct scsi_lun fc_lun;
 	enum fnic_ioreq_state old_ioreq_state;
 
-	FNIC_SCSI_DBG(KERN_DEBUG,
-		      fnic->lport->host,
-		      "fnic_rport_exch_reset called portid 0x%06x\n",
-		      port_id);
-
-	if (fnic->in_remove)
-		return;
-
-	for (tag = 0; tag < fnic->fnic_max_tag_id; tag++) {
-		abt_tag = tag;
-		io_lock = fnic_io_lock_tag(fnic, tag);
-		spin_lock_irqsave(io_lock, flags);
-		sc = scsi_host_find_tag(fnic->lport->host, tag);
-		if (!sc) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
+	io_lock = fnic_io_lock_tag(fnic, abt_tag);
+	spin_lock_irqsave(io_lock, flags);
 
-		io_req = (struct fnic_io_req *)CMD_SP(sc);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
 
-		if (!io_req || io_req->port_id != port_id) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
+	if (!io_req || io_req->port_id != iter_data->port_id) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
 
-		if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
-			(!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
-			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+	if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
+	    (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
+		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
 			"fnic_rport_exch_reset dev rst not pending sc 0x%p\n",
 			sc);
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
 
-		/*
-		 * Found IO that is still pending with firmware and
-		 * belongs to rport that went away
-		 */
-		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-		if (io_req->abts_done) {
-			shost_printk(KERN_ERR, fnic->lport->host,
+	/*
+	 * Found IO that is still pending with firmware and
+	 * belongs to rport that went away
+	 */
+	if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
+	if (io_req->abts_done) {
+		shost_printk(KERN_ERR, fnic->lport->host,
 			"fnic_rport_exch_reset: io_req->abts_done is set "
 			"state is %s\n",
 			fnic_ioreq_state_to_str(CMD_STATE(sc)));
-		}
+	}
 
-		if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED)) {
-			shost_printk(KERN_ERR, fnic->lport->host,
-				  "rport_exch_reset "
-				  "IO not yet issued %p tag 0x%x flags "
-				  "%x state %d\n",
-				  sc, tag, CMD_FLAGS(sc), CMD_STATE(sc));
-		}
-		old_ioreq_state = CMD_STATE(sc);
-		CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
-		CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
-		if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
-			atomic64_inc(&reset_stats->device_reset_terminates);
-			abt_tag = (tag | FNIC_TAG_DEV_RST);
-			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-			"fnic_rport_exch_reset dev rst sc 0x%p\n",
-			sc);
-		}
+	if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED)) {
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "rport_exch_reset "
+			     "IO not yet issued %p tag 0x%x flags "
+			     "%x state %d\n",
+			     sc, abt_tag, CMD_FLAGS(sc), CMD_STATE(sc));
+	}
+	old_ioreq_state = CMD_STATE(sc);
+	CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+	CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+	if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
+		atomic64_inc(&reset_stats->device_reset_terminates);
+		abt_tag |= FNIC_TAG_DEV_RST;
+	}
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "fnic_rport_exch_reset dev rst sc 0x%p\n", sc);
+	BUG_ON(io_req->abts_done);
 
-		BUG_ON(io_req->abts_done);
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "fnic_rport_reset_exch: Issuing abts\n");
 
-		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-			      "fnic_rport_reset_exch: Issuing abts\n");
+	spin_unlock_irqrestore(io_lock, flags);
 
+	/* Now queue the abort command to firmware */
+	int_to_scsilun(sc->device->lun, &fc_lun);
+
+	if (fnic_queue_abort_io_req(fnic, abt_tag,
+				    FCPIO_ITMF_ABT_TASK_TERM,
+				    fc_lun.scsi_lun, io_req)) {
+		/*
+		 * Revert the cmd state back to old state, if
+		 * it hasn't changed in between. This cmd will get
+		 * aborted later by scsi_eh, or cleaned up during
+		 * lun reset
+		 */
+		spin_lock_irqsave(io_lock, flags);
+		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+			CMD_STATE(sc) = old_ioreq_state;
+		spin_unlock_irqrestore(io_lock, flags);
+	} else {
+		spin_lock_irqsave(io_lock, flags);
+		if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
+			CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
+		else
+			CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
 		spin_unlock_irqrestore(io_lock, flags);
+		atomic64_inc(&term_stats->terminates);
+		iter_data->term_cnt++;
+	}
+	return true;
+}
 
-		/* Now queue the abort command to firmware */
-		int_to_scsilun(sc->device->lun, &fc_lun);
+static void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
+{
+	struct terminate_stats *term_stats = &fnic->fnic_stats.term_stats;
+	struct fnic_rport_abort_io_iter_data iter_data = {
+		.fnic = fnic,
+		.port_id = port_id,
+		.term_cnt = 0,
+	};
 
-		if (fnic_queue_abort_io_req(fnic, abt_tag,
-					    FCPIO_ITMF_ABT_TASK_TERM,
-					    fc_lun.scsi_lun, io_req)) {
-			/*
-			 * Revert the cmd state back to old state, if
-			 * it hasn't changed in between. This cmd will get
-			 * aborted later by scsi_eh, or cleaned up during
-			 * lun reset
-			 */
-			spin_lock_irqsave(io_lock, flags);
-			if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
-				CMD_STATE(sc) = old_ioreq_state;
-			spin_unlock_irqrestore(io_lock, flags);
-		} else {
-			spin_lock_irqsave(io_lock, flags);
-			if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
-				CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
-			else
-				CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
-			spin_unlock_irqrestore(io_lock, flags);
-			atomic64_inc(&term_stats->terminates);
-			term_cnt++;
-		}
-	}
-	if (term_cnt > atomic64_read(&term_stats->max_terminates))
-		atomic64_set(&term_stats->max_terminates, term_cnt);
+	FNIC_SCSI_DBG(KERN_DEBUG,
+		      fnic->lport->host,
+		      "fnic_rport_exch_reset called portid 0x%06x\n",
+		      port_id);
+
+	if (fnic->in_remove)
+		return;
+
+	scsi_host_busy_iter(fnic->lport->host, fnic_rport_abort_io_iter,
+			    &iter_data);
+	if (iter_data.term_cnt > atomic64_read(&term_stats->max_terminates))
+		atomic64_set(&term_stats->max_terminates, iter_data.term_cnt);
 
 }
 
 void fnic_terminate_rport_io(struct fc_rport *rport)
 {
-	int tag;
-	int abt_tag;
-	int term_cnt = 0;
-	struct fnic_io_req *io_req;
-	spinlock_t *io_lock;
-	unsigned long flags;
-	struct scsi_cmnd *sc;
-	struct scsi_lun fc_lun;
 	struct fc_rport_libfc_priv *rdata;
 	struct fc_lport *lport;
 	struct fnic *fnic;
-	struct fc_rport *cmd_rport;
-	struct reset_stats *reset_stats;
-	struct terminate_stats *term_stats;
-	enum fnic_ioreq_state old_ioreq_state;
 
 	if (!rport) {
 		printk(KERN_ERR "fnic_terminate_rport_io: rport is NULL\n");
@@ -1719,108 +1717,7 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
 	if (fnic->in_remove)
 		return;
 
-	reset_stats = &fnic->fnic_stats.reset_stats;
-	term_stats = &fnic->fnic_stats.term_stats;
-
-	for (tag = 0; tag < fnic->fnic_max_tag_id; tag++) {
-		abt_tag = tag;
-		io_lock = fnic_io_lock_tag(fnic, tag);
-		spin_lock_irqsave(io_lock, flags);
-		sc = scsi_host_find_tag(fnic->lport->host, tag);
-		if (!sc) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-
-		io_req = (struct fnic_io_req *)CMD_SP(sc);
-		if (!io_req) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-
-		cmd_rport = starget_to_rport(scsi_target(sc->device));
-		if (rport != cmd_rport) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-
-		if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
-			(!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
-			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-			"fnic_terminate_rport_io dev rst not pending sc 0x%p\n",
-			sc);
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-		/*
-		 * Found IO that is still pending with firmware and
-		 * belongs to rport that went away
-		 */
-		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-		if (io_req->abts_done) {
-			shost_printk(KERN_ERR, fnic->lport->host,
-			"fnic_terminate_rport_io: io_req->abts_done is set "
-			"state is %s\n",
-			fnic_ioreq_state_to_str(CMD_STATE(sc)));
-		}
-		if (!(CMD_FLAGS(sc) & FNIC_IO_ISSUED)) {
-			FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
-				  "fnic_terminate_rport_io "
-				  "IO not yet issued %p tag 0x%x flags "
-				  "%x state %d\n",
-				  sc, tag, CMD_FLAGS(sc), CMD_STATE(sc));
-		}
-		old_ioreq_state = CMD_STATE(sc);
-		CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
-		CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
-		if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
-			atomic64_inc(&reset_stats->device_reset_terminates);
-			abt_tag = (tag | FNIC_TAG_DEV_RST);
-			FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-			"fnic_terminate_rport_io dev rst sc 0x%p\n", sc);
-		}
-
-		BUG_ON(io_req->abts_done);
-
-		FNIC_SCSI_DBG(KERN_DEBUG,
-			      fnic->lport->host,
-			      "fnic_terminate_rport_io: Issuing abts\n");
-
-		spin_unlock_irqrestore(io_lock, flags);
-
-		/* Now queue the abort command to firmware */
-		int_to_scsilun(sc->device->lun, &fc_lun);
-
-		if (fnic_queue_abort_io_req(fnic, abt_tag,
-					    FCPIO_ITMF_ABT_TASK_TERM,
-					    fc_lun.scsi_lun, io_req)) {
-			/*
-			 * Revert the cmd state back to old state, if
-			 * it hasn't changed in between. This cmd will get
-			 * aborted later by scsi_eh, or cleaned up during
-			 * lun reset
-			 */
-			spin_lock_irqsave(io_lock, flags);
-			if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
-				CMD_STATE(sc) = old_ioreq_state;
-			spin_unlock_irqrestore(io_lock, flags);
-		} else {
-			spin_lock_irqsave(io_lock, flags);
-			if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
-				CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
-			else
-				CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
-			spin_unlock_irqrestore(io_lock, flags);
-			atomic64_inc(&term_stats->terminates);
-			term_cnt++;
-		}
-	}
-	if (term_cnt > atomic64_read(&term_stats->max_terminates))
-		atomic64_set(&term_stats->max_terminates, term_cnt);
-
+	fnic_rport_exch_reset(fnic, rport->port_id);
 }
 
 /*
@@ -2115,165 +2012,183 @@ static inline int fnic_queue_dr_io_req(struct fnic *fnic,
 	return ret;
 }
 
-/*
- * Clean up any pending aborts on the lun
- * For each outstanding IO on this lun, whose abort is not completed by fw,
- * issue a local abort. Wait for abort to complete. Return 0 if all commands
- * successfully aborted, 1 otherwise
- */
-static int fnic_clean_pending_aborts(struct fnic *fnic,
-				     struct scsi_cmnd *lr_sc,
-					 bool new_sc)
+struct fnic_pending_aborts_iter_data {
+	struct fnic *fnic;
+	struct scsi_cmnd *lr_sc;
+	struct scsi_device *lun_dev;
+	int ret;
+};
 
+static bool fnic_pending_aborts_iter(struct scsi_cmnd *sc,
+				     void *data, bool reserved)
 {
-	int tag, abt_tag;
+	struct fnic_pending_aborts_iter_data *iter_data = data;
+	struct fnic *fnic = iter_data->fnic;
+	struct scsi_device *lun_dev = iter_data->lun_dev;
+	int abt_tag = sc->request->tag;
 	struct fnic_io_req *io_req;
 	spinlock_t *io_lock;
 	unsigned long flags;
-	int ret = 0;
-	struct scsi_cmnd *sc;
 	struct scsi_lun fc_lun;
-	struct scsi_device *lun_dev = lr_sc->device;
 	DECLARE_COMPLETION_ONSTACK(tm_done);
 	enum fnic_ioreq_state old_ioreq_state;
 
-	for (tag = 0; tag < fnic->fnic_max_tag_id; tag++) {
-		io_lock = fnic_io_lock_tag(fnic, tag);
-		spin_lock_irqsave(io_lock, flags);
-		sc = scsi_host_find_tag(fnic->lport->host, tag);
-		/*
-		 * ignore this lun reset cmd if issued using new SC
-		 * or cmds that do not belong to this lun
-		 */
-		if (!sc || ((sc == lr_sc) && new_sc) || sc->device != lun_dev) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
+	if (sc == iter_data->lr_sc || sc->device != lun_dev)
+		return true;
+	if (reserved)
+		return true;
 
-		io_req = (struct fnic_io_req *)CMD_SP(sc);
-
-		if (!io_req || sc->device != lun_dev) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-
-		/*
-		 * Found IO that is still pending with firmware and
-		 * belongs to the LUN that we are resetting
-		 */
-		FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
-			      "Found IO in %s on lun\n",
-			      fnic_ioreq_state_to_str(CMD_STATE(sc)));
-
-		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
-		if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
-			(!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
-			FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
-				"%s dev rst not pending sc 0x%p\n", __func__,
-				sc);
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
+	io_lock = fnic_io_lock_tag(fnic, abt_tag);
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
 
-		if (io_req->abts_done)
-			shost_printk(KERN_ERR, fnic->lport->host,
-			  "%s: io_req->abts_done is set state is %s\n",
-			  __func__, fnic_ioreq_state_to_str(CMD_STATE(sc)));
-		old_ioreq_state = CMD_STATE(sc);
-		/*
-		 * Any pending IO issued prior to reset is expected to be
-		 * in abts pending state, if not we need to set
-		 * FNIC_IOREQ_ABTS_PENDING to indicate the IO is abort pending.
-		 * When IO is completed, the IO will be handed over and
-		 * handled in this function.
-		 */
-		CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+	/*
+	 * Found IO that is still pending with firmware and
+	 * belongs to the LUN that we are resetting
+	 */
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+		      "Found IO in %s on lun\n",
+		      fnic_ioreq_state_to_str(CMD_STATE(sc)));
 
-		BUG_ON(io_req->abts_done);
+	if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
+	if ((CMD_FLAGS(sc) & FNIC_DEVICE_RESET) &&
+	    (!(CMD_FLAGS(sc) & FNIC_DEV_RST_ISSUED))) {
+		FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+			      "%s dev rst not pending sc 0x%p\n", __func__,
+			      sc);
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
 
-		abt_tag = tag;
-		if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
-			abt_tag |= FNIC_TAG_DEV_RST;
-			FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
-				  "%s: dev rst sc 0x%p\n", __func__, sc);
-		}
+	if (io_req->abts_done)
+		shost_printk(KERN_ERR, fnic->lport->host,
+			     "%s: io_req->abts_done is set state is %s\n",
+			     __func__, fnic_ioreq_state_to_str(CMD_STATE(sc)));
+	old_ioreq_state = CMD_STATE(sc);
+	/*
+	 * Any pending IO issued prior to reset is expected to be
+	 * in abts pending state, if not we need to set
+	 * FNIC_IOREQ_ABTS_PENDING to indicate the IO is abort pending.
+	 * When IO is completed, the IO will be handed over and
+	 * handled in this function.
+	 */
+	CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
 
-		CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
-		io_req->abts_done = &tm_done;
-		spin_unlock_irqrestore(io_lock, flags);
+	BUG_ON(io_req->abts_done);
 
-		/* Now queue the abort command to firmware */
-		int_to_scsilun(sc->device->lun, &fc_lun);
+	if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET) {
+		abt_tag |= FNIC_TAG_DEV_RST;
+		FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+			      "%s: dev rst sc 0x%p\n", __func__, sc);
+	}
 
-		if (fnic_queue_abort_io_req(fnic, abt_tag,
-					    FCPIO_ITMF_ABT_TASK_TERM,
-					    fc_lun.scsi_lun, io_req)) {
-			spin_lock_irqsave(io_lock, flags);
-			io_req = (struct fnic_io_req *)CMD_SP(sc);
-			if (io_req)
-				io_req->abts_done = NULL;
-			if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
-				CMD_STATE(sc) = old_ioreq_state;
-			spin_unlock_irqrestore(io_lock, flags);
-			ret = 1;
-			goto clean_pending_aborts_end;
-		} else {
-			spin_lock_irqsave(io_lock, flags);
-			if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
-				CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
-			spin_unlock_irqrestore(io_lock, flags);
-		}
-		CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
+	CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+	io_req->abts_done = &tm_done;
+	spin_unlock_irqrestore(io_lock, flags);
 
-		wait_for_completion_timeout(&tm_done,
-					    msecs_to_jiffies
-					    (fnic->config.ed_tov));
+	/* Now queue the abort command to firmware */
+	int_to_scsilun(sc->device->lun, &fc_lun);
 
-		/* Recheck cmd state to check if it is now aborted */
+	if (fnic_queue_abort_io_req(fnic, abt_tag,
+				    FCPIO_ITMF_ABT_TASK_TERM,
+				    fc_lun.scsi_lun, io_req)) {
 		spin_lock_irqsave(io_lock, flags);
 		io_req = (struct fnic_io_req *)CMD_SP(sc);
-		if (!io_req) {
-			spin_unlock_irqrestore(io_lock, flags);
-			CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL;
-			continue;
-		}
+		if (io_req)
+			io_req->abts_done = NULL;
+		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+			CMD_STATE(sc) = old_ioreq_state;
+		spin_unlock_irqrestore(io_lock, flags);
+		iter_data->ret = FAILED;
+		return false;
+	} else {
+		spin_lock_irqsave(io_lock, flags);
+		if (CMD_FLAGS(sc) & FNIC_DEVICE_RESET)
+			CMD_FLAGS(sc) |= FNIC_DEV_RST_TERM_ISSUED;
+		spin_unlock_irqrestore(io_lock, flags);
+	}
+	CMD_FLAGS(sc) |= FNIC_IO_INTERNAL_TERM_ISSUED;
 
-		io_req->abts_done = NULL;
+	wait_for_completion_timeout(&tm_done, msecs_to_jiffies
+				    (fnic->config.ed_tov));
 
-		/* if abort is still pending with fw, fail */
-		if (CMD_ABTS_STATUS(sc) == FCPIO_INVALID_CODE) {
-			spin_unlock_irqrestore(io_lock, flags);
-			CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE;
-			ret = 1;
-			goto clean_pending_aborts_end;
-		}
-		CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
+	/* Recheck cmd state to check if it is now aborted */
+	spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_REQ_NULL;
+		return true;
+	}
 
-		/* original sc used for lr is handled by dev reset code */
-		if (sc != lr_sc)
-			CMD_SP(sc) = NULL;
+	io_req->abts_done = NULL;
+
+	/* if abort is still pending with fw, fail */
+	if (CMD_ABTS_STATUS(sc) == FCPIO_INVALID_CODE) {
 		spin_unlock_irqrestore(io_lock, flags);
+		CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE;
+		iter_data->ret = FAILED;
+		return false;
+	}
+	CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
 
-		/* original sc used for lr is handled by dev reset code */
-		if (sc != lr_sc) {
-			fnic_release_ioreq_buf(fnic, io_req, sc);
-			mempool_free(io_req, fnic->io_req_pool);
-		}
+	/* original sc used for lr is handled by dev reset code */
+	if (sc != iter_data->lr_sc)
+		CMD_SP(sc) = NULL;
+	spin_unlock_irqrestore(io_lock, flags);
 
-		/*
-		 * Any IO is returned during reset, it needs to call scsi_done
-		 * to return the scsi_cmnd to upper layer.
-		 */
-		if (sc->scsi_done) {
-			/* Set result to let upper SCSI layer retry */
-			sc->result = DID_RESET << 16;
-			sc->scsi_done(sc);
-		}
+	/* original sc used for lr is handled by dev reset code */
+	if (sc != iter_data->lr_sc) {
+		fnic_release_ioreq_buf(fnic, io_req, sc);
+		mempool_free(io_req, fnic->io_req_pool);
 	}
 
+	/*
+	 * Any IO is returned during reset, it needs to call scsi_done
+	 * to return the scsi_cmnd to upper layer.
+	 */
+	if (sc->scsi_done) {
+		/* Set result to let upper SCSI layer retry */
+		sc->result = DID_RESET << 16;
+		sc->scsi_done(sc);
+	}
+	return true;
+}
+
+/*
+ * Clean up any pending aborts on the lun
+ * For each outstanding IO on this lun, whose abort is not completed by fw,
+ * issue a local abort. Wait for abort to complete. Return 0 if all commands
+ * successfully aborted, 1 otherwise
+ */
+static int fnic_clean_pending_aborts(struct fnic *fnic,
+				     struct scsi_cmnd *lr_sc,
+				     bool new_sc)
+
+{
+	int ret = SUCCESS;
+	struct fnic_pending_aborts_iter_data iter_data = {
+		.fnic = fnic,
+		.lun_dev = lr_sc->device,
+		.ret = SUCCESS,
+	};
+
+	if (new_sc)
+		iter_data.lr_sc = lr_sc;
+
+	scsi_host_busy_iter(fnic->lport->host,
+			    fnic_pending_aborts_iter, &iter_data);
+	if (iter_data.ret == FAILED) {
+		ret = iter_data.ret;
+		goto clean_pending_aborts_end;
+	}
 	schedule_timeout(msecs_to_jiffies(2 * fnic->config.ed_tov));
 
 	/* walk again to check, if IOs are still pending in fw */
@@ -2772,58 +2687,72 @@ void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
 
 }
 
-/*
- * fnic_is_abts_pending() is a helper function that
- * walks through tag map to check if there is any IOs pending,if there is one,
- * then it returns 1 (true), otherwise 0 (false)
- * if @lr_sc is non NULL, then it checks IOs specific to particular LUN,
- * otherwise, it checks for all IOs.
- */
-int fnic_is_abts_pending(struct fnic *fnic, struct scsi_cmnd *lr_sc)
+static bool fnic_abts_pending_iter(struct scsi_cmnd *sc, void *data,
+				   bool reserved)
 {
-	int tag;
+	struct fnic_pending_aborts_iter_data *iter_data = data;
+	struct fnic *fnic = iter_data->fnic;
+	int cmd_state;
 	struct fnic_io_req *io_req;
 	spinlock_t *io_lock;
 	unsigned long flags;
-	int ret = 0;
-	struct scsi_cmnd *sc;
-	struct scsi_device *lun_dev = NULL;
 
-	if (lr_sc)
-		lun_dev = lr_sc->device;
+	/*
+	 * ignore this lun reset cmd or cmds that do not belong to
+	 * this lun
+	 */
+	if (iter_data->lr_sc && sc == iter_data->lr_sc)
+		return true;
+	if (iter_data->lun_dev && sc->device != iter_data->lun_dev)
+		return true;
 
-	/* walk again to check, if IOs are still pending in fw */
-	for (tag = 0; tag < fnic->fnic_max_tag_id; tag++) {
-		sc = scsi_host_find_tag(fnic->lport->host, tag);
-		/*
-		 * ignore this lun reset cmd or cmds that do not belong to
-		 * this lun
-		 */
-		if (!sc || (lr_sc && (sc->device != lun_dev || sc == lr_sc)))
-			continue;
+	io_lock = fnic_io_lock_hash(fnic, sc);
+	spin_lock_irqsave(io_lock, flags);
 
-		io_lock = fnic_io_lock_hash(fnic, sc);
-		spin_lock_irqsave(io_lock, flags);
+	io_req = (struct fnic_io_req *)CMD_SP(sc);
+	if (!io_req) {
+		spin_unlock_irqrestore(io_lock, flags);
+		return true;
+	}
 
-		io_req = (struct fnic_io_req *)CMD_SP(sc);
+	/*
+	 * Found IO that is still pending with firmware and
+	 * belongs to the LUN that we are resetting
+	 */
+	FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+		      "Found IO in %s on lun\n",
+		      fnic_ioreq_state_to_str(CMD_STATE(sc)));
+	cmd_state = CMD_STATE(sc);
+	spin_unlock_irqrestore(io_lock, flags);
+	if (cmd_state == FNIC_IOREQ_ABTS_PENDING)
+		iter_data->ret = 1;
 
-		if (!io_req || sc->device != lun_dev) {
-			spin_unlock_irqrestore(io_lock, flags);
-			continue;
-		}
+	return iter_data->ret ? false : true;
+}
 
-		/*
-		 * Found IO that is still pending with firmware and
-		 * belongs to the LUN that we are resetting
-		 */
-		FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
-			      "Found IO in %s on lun\n",
-			      fnic_ioreq_state_to_str(CMD_STATE(sc)));
+/*
+ * fnic_is_abts_pending() is a helper function that
+ * walks through tag map to check if there is any IOs pending,if there is one,
+ * then it returns 1 (true), otherwise 0 (false)
+ * if @lr_sc is non NULL, then it checks IOs specific to particular LUN,
+ * otherwise, it checks for all IOs.
+ */
+int fnic_is_abts_pending(struct fnic *fnic, struct scsi_cmnd *lr_sc)
+{
+	struct fnic_pending_aborts_iter_data iter_data = {
+		.fnic = fnic,
+		.lun_dev = NULL,
+		.ret = 0,
+	};
 
-		if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
-			ret = 1;
-		spin_unlock_irqrestore(io_lock, flags);
+	if (lr_sc) {
+		iter_data.lun_dev = lr_sc->device;
+		iter_data.lr_sc = lr_sc;
 	}
 
-	return ret;
+	/* walk again to check, if IOs are still pending in fw */
+	scsi_host_busy_iter(fnic->lport->host,
+			    fnic_abts_pending_iter, &iter_data);
+
+	return iter_data.ret;
 }
Signature · 1 line
2.29.2
Reviewed-by on v1 2/3
#4 lore raw
Quoted 7 lines · Hannes Reinecke

Use scsi_host_busy_iter() to traverse commands instead of hand-crafted routines walking the command list.

---
 drivers/scsi/fnic/fnic_scsi.c | 821 ++++++++++++++++------------------
 1 file changed, 375 insertions(+), 446 deletions(-)

Looks fine:

Signature · 1 line
Ming
#5 lore raw

PATCH 3/3 fnic: check for started requests in fnic_wq_copy_cleanup_handler()

In reply to Hannes Reinecke

fnic_wq_copy_cleanup_handler() is using scsi_host_find_tag() to map id to a scsi command. However, as per discussion on the mailinglist scsi_host_find_tag() might return a non-started request, so we need to check the returned command with blk_mq_request_started() to avoid the function tripping over a non-initialized command.

---
 drivers/scsi/fnic/fnic_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +1 -1
index 762cc8bd2653..b9fd3d87416b 100644
@@ -1466,7 +1466,7 @@ void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
 		return;
 
 	sc = scsi_host_find_tag(fnic->lport->host, id);
-	if (!sc)
+	if (!sc || !blk_mq_request_started(sc->request))
 		return;
 
 	io_lock = fnic_io_lock_hash(fnic, sc);
Signature · 1 line
2.29.2
#6 lore raw

Re: [PATCH 3/3] fnic: check for started requests in fnic_wq_copy_cleanup_handler()

Quoted 16 lines · Hannes Reinecke

fnic_wq_copy_cleanup_handler() is using scsi_host_find_tag() to map id to a scsi command. However, as per discussion on the mailinglist scsi_host_find_tag() might return a non-started request, so we need to check the returned command with blk_mq_request_started() to avoid the function tripping over a non-initialized command.

---
 drivers/scsi/fnic/fnic_scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +0 -0
index 762cc8bd2653..b9fd3d87416b 100644

drivers/scsi/fnic/fnic_scsi.c void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, · line 1470

Quoted 6 lines
drivers/scsi/fnic/fnic_scsi.c +1 -1
@@ -1466,7 +1466,7 @@ void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
 		return;
 
 	sc = scsi_host_find_tag(fnic->lport->host, id);
-	if (!sc)
+	if (!sc || !blk_mq_request_started(sc->request))
 		return;

scsi_host_find_tag() has covered blk_mq_request_started check already, so this patch isn't necessary.

Thanks,
Ming

#7 lore raw

Re: [PATCH 3/3] fnic: check for started requests in fnic_wq_copy_cleanup_handler()

Quoted 19 lines · Ming Lei
Quoted 18 lines · Hannes Reinecke

fnic_wq_copy_cleanup_handler() is using scsi_host_find_tag() to map id to a scsi command. However, as per discussion on the mailinglist scsi_host_find_tag() might return a non-started request, so we need to check the returned command with blk_mq_request_started() to avoid the function tripping over a non-initialized command.

---
  drivers/scsi/fnic/fnic_scsi.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +0 -0
index 762cc8bd2653..b9fd3d87416b 100644
@@ -1466,7 +1466,7 @@ void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
  		return;
 
Quoted 8 lines

drivers/scsi/fnic/fnic_scsi.c void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, · line 1470

Quoted 4 lines
drivers/scsi/fnic/fnic_scsi.c +1 -1
  	sc = scsi_host_find_tag(fnic->lport->host, id);
-	if (!sc)
+	if (!sc || !blk_mq_request_started(sc->request))
  		return;

scsi_host_find_tag() has covered blk_mq_request_started check already, so this patch isn't necessary.

Right. So drop it, then.

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke                Kernel Storage Architect
[email protected]                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
#8 lore raw

Re: [PATCH 3/3] fnic: check for started requests in fnic_wq_copy_cleanup_handler()

Quoted 34 lines · Hannes Reinecke
Quoted 24 lines · Ming Lei
Quoted 23 lines · Hannes Reinecke

fnic_wq_copy_cleanup_handler() is using scsi_host_find_tag() to map id to a scsi command. However, as per discussion on the mailinglist
scsi_host_find_tag() might return a non-started request, so we need
to check the returned command with blk_mq_request_started() to avoid
the function tripping over a non-initialized command.

---
  drivers/scsi/fnic/fnic_scsi.c | 2 +-

  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +0 -0
index 762cc8bd2653..b9fd3d87416b 100644
@@ -1466,7 +1466,7 @@ void fnic_wq_copy_cleanup_handler(struct
 vnic_wq_copy *wq,
                 return;

Quoted 9 lines
Quoted 4 lines

        sc = scsi_host_find_tag(fnic->lport->host, id); -       if (!sc)
+       if (!sc || !blk_mq_request_started(sc->request)) return;

scsi_host_find_tag() has covered blk_mq_request_started check already, so
this patch isn't necessary.

Quoted 1 line

Right. So drop it, then.

While you are at this, could you please re-consider e73a5e8e8003 ("scsi: core: Only return started requests from scsi_host_find_tag()") in general?

I have come to think that commit is incorrect. It was created as an attempt to fix the observed fnic crashes, but it was ineffective. The crashes were eventually fixed by patch 2/3 of this series.

IMO scsi_host_find_tag() should return a request if there is one, regardless whether or not it's started, and leave the decision to ignore pending requests to the caller, like it used to be until v5.8.

Regards
Martin

#9 lore raw

Re: [PATCH 3/3] fnic: check for started requests in fnic_wq_copy_cleanup_handler()

Quoted 41 lines · Martin Wilck
Quoted 34 lines · Hannes Reinecke
Quoted 24 lines · Ming Lei
Quoted 23 lines · Hannes Reinecke

fnic_wq_copy_cleanup_handler() is using scsi_host_find_tag() to map id to a scsi command. However, as per discussion on the mailinglist
scsi_host_find_tag() might return a non-started request, so we need
to check the returned command with blk_mq_request_started() to avoid
the function tripping over a non-initialized command.

---
  drivers/scsi/fnic/fnic_scsi.c | 2 +-

  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +0 -0
index 762cc8bd2653..b9fd3d87416b 100644
@@ -1466,7 +1466,7 @@ void fnic_wq_copy_cleanup_handler(struct
 vnic_wq_copy *wq,
                 return;

Quoted 9 lines
Quoted 4 lines

        sc = scsi_host_find_tag(fnic->lport->host, id); -       if (!sc)
+       if (!sc || !blk_mq_request_started(sc->request)) return;

scsi_host_find_tag() has covered blk_mq_request_started check already, so
this patch isn't necessary.

Quoted 1 line

Right. So drop it, then.

While you are at this, could you please re-consider e73a5e8e8003 ("scsi: core: Only return started requests from scsi_host_find_tag()") in general?

Quoted 7 lines

I have come to think that commit is incorrect. It was created as an attempt to fix the observed fnic crashes, but it was ineffective. The crashes were eventually fixed by patch 2/3 of this series.

IMO scsi_host_find_tag() should return a request if there is one, regardless whether or not it's started, and leave the decision to ignore pending requests to the caller, like it used to be until v5.8.

Can you share the cases in which SCSI needs to deal with non in-flight requests via scsi_host_find_tag()? which is supposed to be used for retrieving request via one active tag in scsi io completion path.

Thanks,
Ming

#10 lore raw

Re: [PATCH 3/3] fnic: check for started requests in fnic_wq_copy_cleanup_handler()

Quoted 58 lines · Ming Lei
Quoted 52 lines · Martin Wilck
Quoted 39 lines · Hannes Reinecke
Quoted 29 lines · Ming Lei
Quoted 27 lines · Hannes Reinecke

fnic_wq_copy_cleanup_handler() is using scsi_host_find_tag() to
map id to a scsi command. However, as per discussion on the mailinglist
scsi_host_find_tag() might return a non-started request, so we
need
to check the returned command with blk_mq_request_started() to
avoid
the function tripping over a non-initialized command.

---
  drivers/scsi/fnic/fnic_scsi.c | 2 +-

  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +0 -0
index 762cc8bd2653..b9fd3d87416b 100644
@@ -1466,7 +1466,7 @@ void

fnic_wq_copy_cleanup_handler(struct
vnic_wq_copy *wq,
                return;

Quoted 9 lines
Quoted 4 lines

        sc = scsi_host_find_tag(fnic->lport->host, id); -       if (!sc)
+       if (!sc || !blk_mq_request_started(sc->request)) return;

scsi_host_find_tag() has covered blk_mq_request_started check already, so
this patch isn't necessary.

Quoted 1 line

Right. So drop it, then.

While you are at this, could you please re-consider e73a5e8e8003 ("scsi: core: Only return started requests from scsi_host_find_tag()")
in general?

I have come to think that commit is incorrect. It was created as an attempt to fix the observed fnic crashes, but it was ineffective. The
crashes were eventually fixed by patch 2/3 of this series.

Quoted 4 lines

IMO scsi_host_find_tag() should return a request if there is one, regardless whether or not it's started, and leave the decision to ignore pending requests to the caller, like it used to be until v5.8.

Quoted 5 lines

Can you share the cases in which SCSI needs to deal with non in- flight
requests via scsi_host_find_tag()? which is supposed to be used for retrieving
request via one active tag in scsi io completion path.

No, I can't. I haven't reviewed every caller. I thought about the function's documentation, which simply says "find the tagged command by host". Maybe I got this wrong.

You're right that returning non-in-flight requests makes no sense for drivers calling this function in the request completion code path.

The situation was a bit different until recently, when drivers used scsi_host_find_tag() also for iterating over commands. The commit message of e73a5e8e8003 stated that it avoids 'random errors' in this case; I am not sure if that's actually the case. I can at least imagine that a driver would want to abort or otherwise invalidate requests even if they're not in flight yet (e.g. when shutting down a controller). As the drivers have now been fixed to use blk_mq_tagset_busy_iter(), there's no need to discuss this further.

Thanks,
Martin

#11 lore raw

Re: [PATCH 3/3] fnic: check for started requests in fnic_wq_copy_cleanup_handler()

Quoted 7 lines · Martin Wilck

No, I can't. I haven't reviewed every caller. I thought about the function's documentation, which simply says "find the tagged command by host". Maybe I got this wrong.

You're right that returning non-in-flight requests makes no sense for drivers calling this function in the request completion code path.

Quoted 8 lines

The situation was a bit different until recently, when drivers used scsi_host_find_tag() also for iterating over commands. The commit message of e73a5e8e8003 stated that it avoids 'random errors' in this case; I am not sure if that's actually the case. I can at least imagine that a driver would want to abort or otherwise invalidate requests even if they're not in flight yet (e.g. when shutting down a controller). As the drivers have now been fixed to use blk_mq_tagset_busy_iter(), there's no need to discuss this further.

Unless if there is a strong argument I'd like to keep commit e73a5e8e8003 ("scsi: core: Only return started requests from scsi_host_find_tag()"). I think that commit implements the behavior that is needed in the completion path of SCSI LLDs.

Thanks,

Bart.