arm/arm64: Prepare for target-efi
Subsystems (2)
v3 cover arm/arm64: Prepare for target-efi
v3:
- Picked up Alex's r-b on patch 1 and 5
- Removed useless cast in pci_host_bridge_get_paddr [Andre]
- Added XN bits when mapping I/O pages [Alex]
- Tweaks to patch 6 suggested by Alex and myself
- Improved patch 8 commit message and changed psci-invoke's input and output parameter types
v2:
- Addressed all comments from Nikos and Alex
- The biggest changes are
* dropping the weird persistent map stuff that I never liked by taking Alex's suggestion to just create the idmap early
* adding mem_region_add() to clean up memory region adding code, also improved the assignment of region fields
- Also, while we found that we still have a memory map assumption (3G-4G reserved for virtual memory allocation), I only make that assumption clear. I've left removing it for an additional patch for another day.
- Added psci_invoke_none() to use prior to the PSCI method being set
- Added r-b's for each patch given, unless the commit changed too much
- Didn't take Alex's suggestion to use x5 for stacktop when calling setup from start. I prefer explicitly loading it again.
This series is a collection of patches derived from [1] that pave the way for new targets, e.g. target-efi[2]. These patches mostly address the elimination of memory map assumptions and they shouldn't have any functional changes. The last two patches are a couple of patches not related to the memory map, but they also prepare for bare metal targets. I tossed them in since I don't think they should be too controversial. This patch series is also available here [3].
[1] https://github.com/rhdrjones/kvm-unit-tests/commits/target-efi
[2] https://www.youtube.com/watch?v=kvaufVrL0J0
[3] https://gitlab.com/rhdrjones/kvm-unit-tests/-/commits/efiprep
Thanks,
drew
Andrew Jones (8):
arm/arm64: Reorganize cstart assembler arm/arm64: Move setup_vm into setup
pci-testdev: ioremap regions
arm/arm64: mmu: Stop mapping an assumed IO region arm/arm64: mmu: Remove memory layout assumptions arm/arm64: setup: Consolidate memory layout assumptions
chr-testdev: Silently fail init
arm/arm64: psci: Don't assume method is hvc
arm/cstart.S | 92 ++++++++++++------- arm/cstart64.S | 45 ++++++--- arm/flat.lds | 23 +++++ arm/selftest.c | 34 ++----- lib/arm/asm/io.h | 6 ++ lib/arm/asm/mmu.h | 3 + lib/arm/asm/page.h | 2 + lib/arm/asm/pgtable-hwdef.h | 1 + lib/arm/asm/psci.h | 10 +- lib/arm/asm/setup.h | 7 +- lib/arm/mmu.c | 53 +++++++---- lib/arm/psci.c | 35 +++++-- lib/arm/setup.c | 177 +++++++++++++++++++++--------------- lib/arm64/asm/io.h | 6 ++ lib/arm64/asm/mmu.h | 1 + lib/arm64/asm/page.h | 2 + lib/chr-testdev.c | 5 +- lib/pci-host-generic.c | 5 +- lib/pci-host-generic.h | 4 +- lib/pci-testdev.c | 4 + 20 files changed, 335 insertions(+), 180 deletions(-)
Signature · 1 line
2.30.2
PATCH v3 1/8 arm/arm64: Reorganize cstart assembler
Move secondary_entry helper functions out of .init and into .text, since secondary_entry isn't run at at "init" time. Actually, anything that is used after init time should be in .text, as we may not include .init in some build configurations.
Reviewed-by Nikos Nikoleris <[email protected]>
--- arm/cstart.S | 66 +++++++++++++++++++++++++++++--------------------- arm/cstart64.S | 18 ++++++++------ 2 files changed, 49 insertions(+), 35 deletions(-)
arm/cstart.S +38 -28
@@ -96,32 +96,7 @@ start: bl exit b halt - -.macro set_mode_stack mode, stack - add \stack, #S_FRAME_SIZE - msr cpsr_c, #(\mode | PSR_I_BIT | PSR_F_BIT) - isb - mov sp, \stack -.endm - -exceptions_init: - mrc p15, 0, r2, c1, c0, 0 @ read SCTLR - bic r2, #CR_V @ SCTLR.V := 0 - mcr p15, 0, r2, c1, c0, 0 @ write SCTLR - ldr r2, =vector_table - mcr p15, 0, r2, c12, c0, 0 @ write VBAR - - mrs r2, cpsr - - /* first frame reserved for svc mode */ - set_mode_stack UND_MODE, r0 - set_mode_stack ABT_MODE, r0 - set_mode_stack IRQ_MODE, r0 - set_mode_stack FIQ_MODE, r0 - - msr cpsr_cxsf, r2 @ back to svc mode - isb - mov pc, lr +.text enable_vfp: /* Enable full access to CP10 and CP11: */
@@ -133,8 +108,6 @@ enable_vfp: vmsr fpexc, r0 mov pc, lr -.text - .global get_mmu_off get_mmu_off: ldr r0, =auxinfo
@@ -235,6 +208,43 @@ asm_mmu_disable: mov pc, lr +/* + * Vectors + */ + +.macro set_mode_stack mode, stack + add \stack, #S_FRAME_SIZE + msr cpsr_c, #(\mode | PSR_I_BIT | PSR_F_BIT) + isb + mov sp, \stack +.endm + +/* + * exceptions_init + * + * Input r0 is the stack top, which is the exception stacks base + */ +exceptions_init: + mrc p15, 0, r2, c1, c0, 0 @ read SCTLR + bic r2, #CR_V @ SCTLR.V := 0 + mcr p15, 0, r2, c1, c0, 0 @ write SCTLR + ldr r2, =vector_table + mcr p15, 0, r2, c12, c0, 0 @ write VBAR + + mrs r2, cpsr + + /* + * The first frame is reserved for svc mode + */ + set_mode_stack UND_MODE, r0 + set_mode_stack ABT_MODE, r0 + set_mode_stack IRQ_MODE, r0 + set_mode_stack FIQ_MODE, r0 + + msr cpsr_cxsf, r2 @ back to svc mode + isb + mov pc, lr + /* * Vector stubs * Simplified version of the Linux kernel implementation
arm/cstart64.S +11 -7
@@ -109,13 +109,6 @@ start: bl exit b halt -exceptions_init: - adrp x4, vector_table - add x4, x4, :lo12:vector_table - msr vbar_el1, x4 - isb - ret - .text .globl get_mmu_off
@@ -251,6 +244,17 @@ asm_mmu_disable: /* * Vectors + */ + +exceptions_init: + adrp x4, vector_table + add x4, x4, :lo12:vector_table + msr vbar_el1, x4 + isb + ret + +/* + * Vector stubs * Adapted from arch/arm64/kernel/entry.S */ .macro vector_stub, name, vec
Signature · 1 line
2.30.2
PATCH v3 2/8 arm/arm64: Move setup_vm into setup
In reply to Andrew JonesConsolidate our setup calls to reduce the amount we need to do from init::start. Also remove a couple of pointless comments from setup().
--- arm/cstart.S | 6 ------ arm/cstart64.S | 5 ----- lib/arm/setup.c | 7 +++++-- 3 files changed, 5 insertions(+), 13 deletions(-)
arm/cstart.S +0 -6
@@ -81,12 +81,7 @@ start: /* complete setup */ pop {r0-r1} bl setup - bl get_mmu_off - cmp r0, #0 - bne 1f - bl setup_vm -1: /* run the test */ ldr r0, =__argc ldr r0, [r0]
@@ -108,7 +103,6 @@ enable_vfp: vmsr fpexc, r0 mov pc, lr -.global get_mmu_off get_mmu_off: ldr r0, =auxinfo ldr r0, [r0, #4]
arm/cstart64.S +0 -5
@@ -93,11 +93,7 @@ start: /* complete setup */ bl setup // x0 is the addr of the dtb - bl get_mmu_off - cbnz x0, 1f - bl setup_vm -1: /* run the test */ adrp x0, __argc ldr w0, [x0, :lo12:__argc]
@@ -111,7 +107,6 @@ start: .text -.globl get_mmu_off get_mmu_off: adrp x0, auxinfo ldr x0, [x0, :lo12:auxinfo + 8]
lib/arm/setup.c +5 -2
@@ -16,6 +16,8 @@#include <alloc.h> #include <alloc_phys.h> #include <alloc_page.h> +#include <vmalloc.h> +#include <auxinfo.h> #include <argv.h> #include <asm/thread_info.h> #include <asm/setup.h>
@@ -233,7 +235,6 @@ void setup(const void *fdt) freemem += initrd_size; } -/* call init functions */ mem_init (PAGE_ALIGN ((unsigned long )freemem));cpu_init ();
@@ -243,7 +244,6 @@ void setup(const void *fdt)/* mem_init must be called before io_init */ io_init (); -/* finish setup */ timer_save_state (); ret =dt_get_bootargs (&bootargs);
@@ -256,4 +256,7 @@ void setup(const void *fdt)memcpy (env, initrd, initrd_size);setup_env (env, initrd_size); } + +if (!(auxinfo.flags &AUXINFO_MMU_OFF )) +setup_vm (); }
Signature · 1 line
2.30.2
PATCH v3 3/8 pci-testdev: ioremap regions
In reply to Andrew JonesDon't assume the physical addresses used with PCI have already been identity mapped.
--- lib/pci-host-generic.c | 5 ++--- lib/pci-host-generic.h | 4 ++-- lib/pci-testdev.c | 4 ++++ 3 files changed, 8 insertions(+), 5 deletions(-)
lib/pci-host-generic.c +2 -3
@@ -122,7 +122,7 @@ static struct pci_host_bridge *pci_dt_probe(void) sizeof(host->addr_space[0]) * nr_addr_spaces);assert (host !=NULL ); - host->start = base.addr; + host->start =ioremap (base.addr, base.size); host->size = base.size; host->bus = bus; host->bus_max = bus_max;
@@ -279,8 +279,7 @@ phys_addr_t pci_host_bridge_get_paddr(u64 pci_addr)static void __iomem *pci_get_dev_conf (struct pci_host_bridge *host,int devfn) { -return (void __iomem *)(unsigned long ) - host->start + (devfn <<PCI_ECAM_DEVFN_SHIFT ); +return host->start + (devfn <<PCI_ECAM_DEVFN_SHIFT ); }u8 pci_config_readb (pcidevaddr_t dev,u8 off)
lib/pci-host-generic.h +2 -2
@@ -18,8 +18,8 @@ struct pci_addr_space { };struct pci_host_bridge { -phys_addr_t start; -phys_addr_t size; +void __iomem *start; +size_t size;int bus;int bus_max;int nr_addr_spaces;
lib/pci-testdev.c +4 -0
@@ -185,7 +185,11 @@ int pci_testdev(void) mem =ioremap (addr,PAGE_SIZE ); addr =pci_bar_get_addr (&pci_dev,1 ); +#if defined(__i386__) || defined(__x86_64__) io = (void *)(unsigned long )addr; +#else + io =ioremap (addr,PAGE_SIZE ); +#endif nr_tests +=pci_testdev_all (mem, &pci_testdev_mem_ops); nr_tests +=pci_testdev_all (io, &pci_testdev_io_ops);
Signature · 1 line
2.30.2
PATCH v3 4/8 arm/arm64: mmu: Stop mapping an assumed IO region
In reply to Andrew JonesBy providing a proper ioremap function, we can just rely on devices calling it for each region they need (as they already do) instead of mapping a big assumed I/O range. We don't require the MMU to be enabled at the time of the ioremap. In that case, we add the mapping to the identity map anyway. This allows us to call setup_vm after io_init. Why don't we just call setup_vm before io_init, I hear you ask? Well, that's because tests like sieve want to start with the MMU off, later call setup_vm, and all the while have working I/O. Some unit tests are just really demanding...
While at it, ensure we map the I/O regions with XN (execute never), as suggested by Alexandru Elisei.
--- lib/arm/asm/io.h | 6 ++++++ lib/arm/asm/mmu.h | 3 +++ lib/arm/asm/page.h | 2 ++ lib/arm/asm/pgtable-hwdef.h | 1 + lib/arm/mmu.c | 37 +++++++++++++++++++++++++++---------- lib/arm64/asm/io.h | 6 ++++++ lib/arm64/asm/mmu.h | 1 + lib/arm64/asm/page.h | 2 ++ 8 files changed, 48 insertions(+), 10 deletions(-)
lib/arm/asm/io.h +6 -0
@@ -77,6 +77,12 @@ static inline void __raw_writel(u32 val, volatile void __iomem *addr) : "r" (val)); } +#define ioremap ioremap +static inline void __iomem *ioremap (phys_addr_t phys_addr,size_t size) +{ +return __ioremap (phys_addr, size); +} +#define virt_to_phys virt_to_physstatic inline phys_addr_t virt_to_phys (const volatile void *x) {
lib/arm/asm/mmu.h +3 -0
@@ -8,10 +8,13 @@#include <asm/barrier.h> #define PTE_USER L_PTE_USER +#define PTE_UXN L_PTE_XN +#define PTE_PXN L_PTE_PXN#define PTE_RDONLY PTE_AP2#define PTE_SHARED L_PTE_SHARED#define PTE_AF PTE_EXT_AF#define PTE_WBWA L_PTE_MT_WRITEALLOC +#define PTE_UNCACHED L_PTE_MT_UNCACHED/* See B3.18.7 TLB maintenance operations */
lib/arm/asm/page.h +2 -0
@@ -47,5 +47,7 @@ typedef struct { pteval_t pgprot; } pgprot_t;extern phys_addr_t __virt_to_phys (unsigned long addr);extern unsigned long __phys_to_virt (phys_addr_t addr); +extern void *__ioremap (phys_addr_t phys_addr,size_t size); +#endif /* !__ASSEMBLY__ */ #endif /* _ASMARM_PAGE_H_ */
lib/arm/asm/pgtable-hwdef.h +1 -0
@@ -34,6 +34,7 @@#define L_PTE_USER (_AT(pteval_t, 1) << 6)/* AP[1] */ #define L_PTE_SHARED (_AT(pteval_t, 3) << 8)/* SH[1:0], inner shareable */ #define L_PTE_YOUNG (_AT(pteval_t, 1) << 10)/* AF */ +#define L_PTE_PXN (_AT(pteval_t, 1) << 53)/* PXN */ #define L_PTE_XN (_AT(pteval_t, 1) << 54)/* XN */ /*
lib/arm/mmu.c +27 -10
@@ -11,6 +11,7 @@#include <asm/mmu.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/io.h> #include "alloc_page.h" #include "vmalloc.h"
@@ -157,9 +158,8 @@ void mmu_set_range_sect(pgd_t *pgtable, uintptr_t virt_offset,void *setup_mmu (phys_addr_t phys_end) {uintptr_t code_end = (uintptr_t )&etext; -struct mem_region *r; -/* 0G-1G = I/O, 1G-3G = identity, 3G-4G = vmalloc */ +/* 3G-4G region is reserved for vmalloc, cap phys_end at 3G */ if (phys_end > (3ul <<30 )) phys_end =3ul <<30 ;
@@ -170,14 +170,8 @@ void *setup_mmu(phys_addr_t phys_end) "Unsupported translation granule %ld\n", PAGE_SIZE);#endif - mmu_idmap =alloc_page (); - -for (r = mem_regions; r->end; ++r) { -if (!(r->flags &MR_F_IO )) -continue ; -mmu_set_range_sect (mmu_idmap, r->start, r->start, r->end, -__pgprot (PMD_SECT_UNCACHED |PMD_SECT_USER )); - } +if (!mmu_idmap) + mmu_idmap =alloc_page ();/* armv8 requires code shared between EL1 and EL0 to be read-only */ mmu_set_range_ptes(mmu_idmap, PHYS_OFFSET,
@@ -192,6 +186,29 @@ void *setup_mmu(phys_addr_t phys_end)return mmu_idmap; } +void __iomem *__ioremap (phys_addr_t phys_addr,size_t size) +{ +phys_addr_t paddr_aligned = phys_addr &PAGE_MASK ; +phys_addr_t paddr_end =PAGE_ALIGN (phys_addr + size); +pgprot_t prot =__pgprot (PTE_UNCACHED |PTE_USER |PTE_UXN |PTE_PXN ); +pgd_t *pgtable; + +assert (sizeof (long ) ==8 || !(phys_addr >>32 )); + +if (mmu_enabled ()) { + pgtable =current_thread_info ()->pgtable; + }else { +if (!mmu_idmap) + mmu_idmap =alloc_page (); + pgtable = mmu_idmap; + } + +mmu_set_range_ptes (pgtable, paddr_aligned, paddr_aligned, + paddr_end, prot); + +return (void __iomem *)(unsigned long )phys_addr; +} +phys_addr_t __virt_to_phys (unsigned long addr) {if (mmu_enabled ()) {
lib/arm64/asm/io.h +6 -0
@@ -71,6 +71,12 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)return val; } +#define ioremap ioremap +static inline void __iomem *ioremap (phys_addr_t phys_addr,size_t size) +{ +return __ioremap (phys_addr, size); +} +#define virt_to_phys virt_to_physstatic inline phys_addr_t virt_to_phys (const volatile void *x) {
lib/arm64/asm/mmu.h +1 -0
@@ -8,6 +8,7 @@#include <asm/barrier.h> #define PMD_SECT_UNCACHED PMD_ATTRINDX(MT_DEVICE_nGnRE) +#define PTE_UNCACHED PTE_ATTRINDX(MT_DEVICE_nGnRE)#define PTE_WBWA PTE_ATTRINDX(MT_NORMAL)static inline void flush_tlb_all (void )
lib/arm64/asm/page.h +2 -0
@@ -72,5 +72,7 @@ typedef struct { pteval_t pgprot; } pgprot_t;extern phys_addr_t __virt_to_phys (unsigned long addr);extern unsigned long __phys_to_virt (phys_addr_t addr); +extern void *__ioremap (phys_addr_t phys_addr,size_t size); +#endif /* !__ASSEMBLY__ */ #endif /* _ASMARM64_PAGE_H_ */
Signature · 1 line
2.30.2
Re: [PATCH kvm-unit-tests v3 4/8] arm/arm64: mmu: Stop mapping an assumed IO region
Hi Drew,
Quoted 10 lines · Andrew Jones
By providing a proper ioremap function, we can just rely on devices calling it for each region they need (as they already do) instead of mapping a big assumed I/O range. We don't require the MMU to be enabled at the time of the ioremap. In that case, we add the mapping to the identity map anyway. This allows us to call
setup_vmafterio_init. Why don't we just callsetup_vmbeforeio_init, I hear you ask? Well, that's because tests like sieve want to start with the MMU off, later callsetup_vm, and all the while have working I/O. Some unit tests are just really demanding...
Quoted 2 lines
While at it, ensure we map the I/O regions with XN (execute never), as suggested by Alexandru Elisei.
I got to thinking why this wasn't an issue before. Under KVM, device memory is not usually mapped at stage 2, so any speculated reads wouldn't have reached memory at all. The only way I imagine that happening if the user was running kvm-unit-tests with a passthrough PCI device, which I don't think happens too often.
But we cannot rely on devices not being mapped at stage 2 when running under EFI (we're mapping them ourselves with ioremap), so I believe this is a good fix.
Had another look at the patch, looks good to me:
Thanks,
Alex
Quoted 183 lines
Signed-off-by Andrew Jones <[email protected]>--- lib/arm/asm/io.h | 6 ++++++ lib/arm/asm/mmu.h | 3 +++ lib/arm/asm/page.h | 2 ++ lib/arm/asm/pgtable-hwdef.h | 1 + lib/arm/mmu.c | 37 +++++++++++++++++++++++++++---------- lib/arm64/asm/io.h | 6 ++++++ lib/arm64/asm/mmu.h | 1 + lib/arm64/asm/page.h | 2 ++ 8 files changed, 48 insertions(+), 10 deletions(-)lib/arm/asm/io.h +6
-0@@ -77,6 +77,12 @@ static inline void __raw_writel(u32 val, volatile void __iomem *addr) : "r" (val)); } +#define ioremap ioremap +static inline void __iomem *ioremap (phys_addr_t phys_addr,size_t size) +{ +return __ioremap (phys_addr, size); +} +#define virt_to_phys virt_to_physstatic inline phys_addr_t virt_to_phys (const volatile void *x) {lib/arm/asm/mmu.h +3
-0@@ -8,10 +8,13 @@#include <asm/barrier.h> #define PTE_USER L_PTE_USER +#define PTE_UXN L_PTE_XN +#define PTE_PXN L_PTE_PXN#define PTE_RDONLY PTE_AP2#define PTE_SHARED L_PTE_SHARED#define PTE_AF PTE_EXT_AF#define PTE_WBWA L_PTE_MT_WRITEALLOC +#define PTE_UNCACHED L_PTE_MT_UNCACHED/* See B3.18.7 TLB maintenance operations */ lib/arm/asm/page.h +2
-0@@ -47,5 +47,7 @@ typedef struct { pteval_t pgprot; } pgprot_t;extern phys_addr_t __virt_to_phys (unsigned long addr);extern unsigned long __phys_to_virt (phys_addr_t addr); +extern void *__ioremap (phys_addr_t phys_addr,size_t size); +#endif /* !__ASSEMBLY__ */ #endif /* _ASMARM_PAGE_H_ */ lib/arm/asm/pgtable-hwdef.h +1
-0@@ -34,6 +34,7 @@#define L_PTE_USER (_AT(pteval_t, 1) << 6)/* AP[1] */ #define L_PTE_SHARED (_AT(pteval_t, 3) << 8)/* SH[1:0], inner shareable */ #define L_PTE_YOUNG (_AT(pteval_t, 1) << 10)/* AF */ +#define L_PTE_PXN (_AT(pteval_t, 1) << 53)/* PXN */ #define L_PTE_XN (_AT(pteval_t, 1) << 54)/* XN */ /* lib/arm/mmu.c +27
-10@@ -11,6 +11,7 @@#include <asm/mmu.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/io.h> #include "alloc_page.h" #include "vmalloc.h" @@ -157,9 +158,8 @@ void mmu_set_range_sect(pgd_t *pgtable, uintptr_t virt_offset,void *setup_mmu (phys_addr_t phys_end) {uintptr_t code_end = (uintptr_t )&etext; -struct mem_region *r; -/* 0G-1G = I/O, 1G-3G = identity, 3G-4G = vmalloc */ +/* 3G-4G region is reserved for vmalloc, cap phys_end at 3G */ if (phys_end > (3ul <<30 )) phys_end =3ul <<30 ;@@ -170,14 +170,8 @@ void *setup_mmu(phys_addr_t phys_end) "Unsupported translation granule %ld\n", PAGE_SIZE);#endif - mmu_idmap =alloc_page (); - -for (r = mem_regions; r->end; ++r) { -if (!(r->flags &MR_F_IO )) -continue ; -mmu_set_range_sect (mmu_idmap, r->start, r->start, r->end, -__pgprot (PMD_SECT_UNCACHED |PMD_SECT_USER )); - } +if (!mmu_idmap) + mmu_idmap =alloc_page ();/* armv8 requires code shared between EL1 and EL0 to be read-only */ mmu_set_range_ptes(mmu_idmap, PHYS_OFFSET,@@ -192,6 +186,29 @@ void *setup_mmu(phys_addr_t phys_end)return mmu_idmap; } +void __iomem *__ioremap (phys_addr_t phys_addr,size_t size) +{ +phys_addr_t paddr_aligned = phys_addr &PAGE_MASK ; +phys_addr_t paddr_end =PAGE_ALIGN (phys_addr + size); +pgprot_t prot =__pgprot (PTE_UNCACHED |PTE_USER |PTE_UXN |PTE_PXN ); +pgd_t *pgtable; + +assert (sizeof (long ) ==8 || !(phys_addr >>32 )); + +if (mmu_enabled ()) { + pgtable =current_thread_info ()->pgtable; + }else { +if (!mmu_idmap) + mmu_idmap =alloc_page (); + pgtable = mmu_idmap; + } + +mmu_set_range_ptes (pgtable, paddr_aligned, paddr_aligned, + paddr_end, prot); + +return (void __iomem *)(unsigned long )phys_addr; +} +phys_addr_t __virt_to_phys (unsigned long addr) {if (mmu_enabled ()) {lib/arm64/asm/io.h +6
-0@@ -71,6 +71,12 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)return val; } +#define ioremap ioremap +static inline void __iomem *ioremap (phys_addr_t phys_addr,size_t size) +{ +return __ioremap (phys_addr, size); +} +#define virt_to_phys virt_to_physstatic inline phys_addr_t virt_to_phys (const volatile void *x) {lib/arm64/asm/mmu.h +1
-0@@ -8,6 +8,7 @@#include <asm/barrier.h> #define PMD_SECT_UNCACHED PMD_ATTRINDX(MT_DEVICE_nGnRE) +#define PTE_UNCACHED PTE_ATTRINDX(MT_DEVICE_nGnRE)#define PTE_WBWA PTE_ATTRINDX(MT_NORMAL)static inline void flush_tlb_all (void )lib/arm64/asm/page.h +2
-0@@ -72,5 +72,7 @@ typedef struct { pteval_t pgprot; } pgprot_t;extern phys_addr_t __virt_to_phys (unsigned long addr);extern unsigned long __phys_to_virt (phys_addr_t addr); +extern void *__ioremap (phys_addr_t phys_addr,size_t size); +#endif /* !__ASSEMBLY__ */ #endif /* _ASMARM64_PAGE_H_ */
Re: [PATCH kvm-unit-tests v3 4/8] arm/arm64: mmu: Stop mapping an assumed IO region
Hi Drew,
Quoted 20 lines · Alexandru Elisei
Hi Drew,
Quoted 10 lines · Andrew Jones
By providing a proper ioremap function, we can just rely on devices calling it for each region they need (as they already do) instead of mapping a big assumed I/O range. We don't require the MMU to be enabled at the time of the ioremap. In that case, we add the mapping to the identity map anyway. This allows us to call
setup_vmafterio_init. Why don't we just callsetup_vmbeforeio_init, I hear you ask? Well, that's because tests like sieve want to start with the MMU off, later callsetup_vm, and all the while have working I/O. Some unit tests are just really demanding...Quoted 2 lines
While at it, ensure we map the I/O regions with XN (execute never), as suggested by Alexandru Elisei.
I got to thinking why this wasn't an issue before. Under KVM, device memory is not usually mapped at stage 2, so any speculated reads wouldn't have reached memory at all. The only way I imagine that happening if the user was running kvm-unit-tests with a passthrough PCI device, which I don't think happens too often.
Quoted 4 lines
But we cannot rely on devices not being mapped at stage 2 when running under EFI (we're mapping them ourselves with ioremap), so I believe this is a good fix.
Had another look at the patch, looks good to me:
While testing the series I discovered that this patch introduces a bug when running under kvmtool.
Here's the splat:
$ ./configure --vmm=kvmtool --earlycon=uart,mmio,0x1000000 --page-size=4K && make clean && make -j6 && ./vm run -c2 -m128 -f arm/micro-bench.flat [..] # lkvm run --firmware arm/micro-bench.flat -m 128 -c 2 --name guest-6986 Info: Placing fdt at 0x80200000 - 0x80210000 chr_testdev_init: chr-testdev: can't find a virtio-console Timer Frequency 24000000 Hz (Output in microseconds)
name total ns avg ns
--------------------------------------------------------------------------------------------
hvc 168674516.0
2573.0
Load address: 80000000
PC: 80000128 PC offset: 128
Unhandled exception ec=0x25 (DABT_EL1)
Vector: 4 (el1h_sync)
ESR_EL1: 96000006, ec=0x25 (DABT_EL1)FAR_EL1: 000000000a000008 (valid)
Exception frame registers:
pc : [<0000000080000128>] lr : [<000000008000cac8>] pstate: 800003c5
sp : 000000008003ff90
x29: 0000000000000000 x28: 0000000000000000
x27: 00000011ada4d0c2 x26: 0000000000000000
x25: 0000000080015978 x24: 0000000080015a90
x23: 0000048c27394fff x22: 20c49ba5e353f7cf
x21: 28f5c28f5c28f5c3 x20: 0000000080016af0
x19: 000000e8d4a51000 x18: 0000000080040000
x17: 0000000000000000 x16: 0000000080008210
x15: 000000008003fe5c x14: 0000000000000260
x13: 00000000000002a4 x12: 0000000080040000
x11: 0000000000000001 x10: 0000000000000060
x9 : 0000000000000000 x8 : 0000000000000039
x7 : 0000000000000040 x6 : 0000000080013983
x5 : 000000008003f74e x4 : 000000008003f69c
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : 000000000a000008
The issue is caused by the mmio_read_user_exec() function from arm/micro-bench.c. kvmtool doesn't have a chr-testdev device, and because probing fails, the address 0x0a000008 isn't ioremap'ed. The 0-1G memory region is not automatically mapped anymore, and the access triggers a data abort at stage 1.
I fixed the splat with this change:
arm/micro-bench.c +0 -0
@@ -281,7 +281,7 @@ static void mmio_read_user_exec(void)
* updated in the future if any relevant changes in QEMU
* test-dev are made.
*/
- void *userspace_emulated_addr = (void*)0x0a000008; + void *userspace_emulated_addr = (void*)ioremap(0x0a000008, 8);
readl(userspace_emulated_addr);
}
kvmtool ignores the MMIO exit reason if no device owns the IPA, that's why it also works on kvmtool.
The micro-bench test with the diff passes under qemu and kvmtool, tested with 4K, 16K and 64K pages on an odroid-c4.
Thanks,
Alex
Quoted 189 lines
Reviewed-by Alexandru Elisei <[email protected]>Thanks,
Alex
Quoted 182 lines
Signed-off-by Andrew Jones <[email protected]>--- lib/arm/asm/io.h | 6 ++++++ lib/arm/asm/mmu.h | 3 +++ lib/arm/asm/page.h | 2 ++ lib/arm/asm/pgtable-hwdef.h | 1 + lib/arm/mmu.c | 37 +++++++++++++++++++++++++++---------- lib/arm64/asm/io.h | 6 ++++++ lib/arm64/asm/mmu.h | 1 + lib/arm64/asm/page.h | 2 ++ 8 files changed, 48 insertions(+), 10 deletions(-)lib/arm/asm/io.h +6
-0@@ -77,6 +77,12 @@ static inline void __raw_writel(u32 val, volatile void __iomem *addr) : "r" (val)); } +#define ioremap ioremap +static inline void __iomem *ioremap (phys_addr_t phys_addr,size_t size) +{ +return __ioremap (phys_addr, size); +} +#define virt_to_phys virt_to_physstatic inline phys_addr_t virt_to_phys (const volatile void *x) {lib/arm/asm/mmu.h +3
-0@@ -8,10 +8,13 @@#include <asm/barrier.h> #define PTE_USER L_PTE_USER +#define PTE_UXN L_PTE_XN +#define PTE_PXN L_PTE_PXN#define PTE_RDONLY PTE_AP2#define PTE_SHARED L_PTE_SHARED#define PTE_AF PTE_EXT_AF#define PTE_WBWA L_PTE_MT_WRITEALLOC +#define PTE_UNCACHED L_PTE_MT_UNCACHED/* See B3.18.7 TLB maintenance operations */ lib/arm/asm/page.h +2
-0@@ -47,5 +47,7 @@ typedef struct { pteval_t pgprot; } pgprot_t;extern phys_addr_t __virt_to_phys (unsigned long addr);extern unsigned long __phys_to_virt (phys_addr_t addr); +extern void *__ioremap (phys_addr_t phys_addr,size_t size); +#endif /* !__ASSEMBLY__ */ #endif /* _ASMARM_PAGE_H_ */ lib/arm/asm/pgtable-hwdef.h +1
-0@@ -34,6 +34,7 @@#define L_PTE_USER (_AT(pteval_t, 1) << 6)/* AP[1] */ #define L_PTE_SHARED (_AT(pteval_t, 3) << 8)/* SH[1:0], inner shareable */ #define L_PTE_YOUNG (_AT(pteval_t, 1) << 10)/* AF */ +#define L_PTE_PXN (_AT(pteval_t, 1) << 53)/* PXN */ #define L_PTE_XN (_AT(pteval_t, 1) << 54)/* XN */ /* lib/arm/mmu.c +27
-10@@ -11,6 +11,7 @@#include <asm/mmu.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/io.h> #include "alloc_page.h" #include "vmalloc.h" @@ -157,9 +158,8 @@ void mmu_set_range_sect(pgd_t *pgtable, uintptr_t virt_offset,void *setup_mmu (phys_addr_t phys_end) {uintptr_t code_end = (uintptr_t )&etext; -struct mem_region *r; -/* 0G-1G = I/O, 1G-3G = identity, 3G-4G = vmalloc */ +/* 3G-4G region is reserved for vmalloc, cap phys_end at 3G */ if (phys_end > (3ul <<30 )) phys_end =3ul <<30 ;@@ -170,14 +170,8 @@ void *setup_mmu(phys_addr_t phys_end) "Unsupported translation granule %ld\n", PAGE_SIZE);#endif - mmu_idmap =alloc_page (); - -for (r = mem_regions; r->end; ++r) { -if (!(r->flags &MR_F_IO )) -continue ; -mmu_set_range_sect (mmu_idmap, r->start, r->start, r->end, -__pgprot (PMD_SECT_UNCACHED |PMD_SECT_USER )); - } +if (!mmu_idmap) + mmu_idmap =alloc_page ();/* armv8 requires code shared between EL1 and EL0 to be read-only */ mmu_set_range_ptes(mmu_idmap, PHYS_OFFSET,@@ -192,6 +186,29 @@ void *setup_mmu(phys_addr_t phys_end)return mmu_idmap; } +void __iomem *__ioremap (phys_addr_t phys_addr,size_t size) +{ +phys_addr_t paddr_aligned = phys_addr &PAGE_MASK ; +phys_addr_t paddr_end =PAGE_ALIGN (phys_addr + size); +pgprot_t prot =__pgprot (PTE_UNCACHED |PTE_USER |PTE_UXN |PTE_PXN ); +pgd_t *pgtable; + +assert (sizeof (long ) ==8 || !(phys_addr >>32 )); + +if (mmu_enabled ()) { + pgtable =current_thread_info ()->pgtable; + }else { +if (!mmu_idmap) + mmu_idmap =alloc_page (); + pgtable = mmu_idmap; + } + +mmu_set_range_ptes (pgtable, paddr_aligned, paddr_aligned, + paddr_end, prot); + +return (void __iomem *)(unsigned long )phys_addr; +} +phys_addr_t __virt_to_phys (unsigned long addr) {if (mmu_enabled ()) {lib/arm64/asm/io.h +6
-0@@ -71,6 +71,12 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)return val; } +#define ioremap ioremap +static inline void __iomem *ioremap (phys_addr_t phys_addr,size_t size) +{ +return __ioremap (phys_addr, size); +} +#define virt_to_phys virt_to_physstatic inline phys_addr_t virt_to_phys (const volatile void *x) {lib/arm64/asm/mmu.h +1
-0@@ -8,6 +8,7 @@#include <asm/barrier.h> #define PMD_SECT_UNCACHED PMD_ATTRINDX(MT_DEVICE_nGnRE) +#define PTE_UNCACHED PTE_ATTRINDX(MT_DEVICE_nGnRE)#define PTE_WBWA PTE_ATTRINDX(MT_NORMAL)static inline void flush_tlb_all (void )lib/arm64/asm/page.h +2
-0@@ -72,5 +72,7 @@ typedef struct { pteval_t pgprot; } pgprot_t;extern phys_addr_t __virt_to_phys (unsigned long addr);extern unsigned long __phys_to_virt (phys_addr_t addr); +extern void *__ioremap (phys_addr_t phys_addr,size_t size); +#endif /* !__ASSEMBLY__ */ #endif /* _ASMARM64_PAGE_H_ */
Re: [PATCH kvm-unit-tests v3 4/8] arm/arm64: mmu: Stop mapping an assumed IO region
Quoted 92 lines · Alexandru Elisei
Hi Drew,
Quoted 20 lines · Alexandru Elisei
Hi Drew,
Quoted 10 lines · Andrew Jones
By providing a proper ioremap function, we can just rely on devices calling it for each region they need (as they already do) instead of mapping a big assumed I/O range. We don't require the MMU to be enabled at the time of the ioremap. In that case, we add the mapping to the identity map anyway. This allows us to call
setup_vmafterio_init. Why don't we just callsetup_vmbeforeio_init, I hear you ask? Well, that's because tests like sieve want to start with the MMU off, later callsetup_vm, and all the while have working I/O. Some unit tests are just really demanding...Quoted 2 lines
While at it, ensure we map the I/O regions with XN (execute never), as suggested by Alexandru Elisei.
I got to thinking why this wasn't an issue before. Under KVM, device memory is not usually mapped at stage 2, so any speculated reads wouldn't have reached memory at all. The only way I imagine that happening if the user was running kvm-unit-tests with a passthrough PCI device, which I don't think happens too often.
Quoted 4 lines
But we cannot rely on devices not being mapped at stage 2 when running under EFI (we're mapping them ourselves with ioremap), so I believe this is a good fix.
Had another look at the patch, looks good to me:
While testing the series I discovered that this patch introduces a bug when running under kvmtool.
Here's the splat:
$ ./configure --vmm=kvmtool --earlycon=uart,mmio,0x1000000 --page-size=4K && make clean && make -j6 && ./vm run -c2 -m128 -f arm/micro-bench.flat [..] # lkvm run --firmware arm/micro-bench.flat -m 128 -c 2 --name guest-6986 Info: Placing fdt at 0x80200000 - 0x80210000 chr_testdev_init: chr-testdev: can't find a virtio-console Timer Frequency 24000000 Hz (Output in microseconds)name total ns avg ns
--------------------------------------------------------------------------------------------
hvc 168674516.0
2573.0
Load address: 80000000
PC: 80000128 PC offset: 128
Unhandled exception ec=0x25 (DABT_EL1)
Vector: 4 (el1h_sync)
ESR_EL1: 96000006, ec=0x25 (DABT_EL1)FAR_EL1:000000000a000008(valid)
Exception frame registers:pc : [<0000000080000128>] lr : [<000000008000cac8>] pstate: 800003c5sp :
000000008003ff90
x29: 0000000000000000 x28: 0000000000000000
x27:00000011ada4d0c2x26: 0000000000000000
x25: 0000000080015978 x24:0000000080015a90
x23:0000048c27394fffx22:20c49ba5e353f7cf
x21:28f5c28f5c28f5c3x20:0000000080016af0
x19:000000e8d4a51000x18: 0000000080040000
x17: 0000000000000000 x16: 0000000080008210
x15:000000008003fe5cx14: 0000000000000260
x13:00000000000002a4x12: 0000000080040000
x11: 0000000000000001 x10: 0000000000000060
x9 : 0000000000000000 x8 : 0000000000000039
x7 : 0000000000000040 x6 : 0000000080013983
x5 :000000008003f74ex4 :000000008003f69c
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 :000000000a000008The issue is caused by the
mmio_read_user_exec()function fromarm/micro-bench.c. kvmtool doesn't have a chr-testdev device, and because probing fails, the address0x0a000008isn't ioremap'ed. The 0-1G memory region is not automatically mapped anymore, and the access triggers a data abort at stage 1.I fixed the splat with this change:
arm/micro-bench.c +1
-1@@ -281,7 +281,7 @@ static void mmio_read_user_exec(void)* updated in the future if any relevant changes in QEMU * test-dev are made. */ - void *userspace_emulated_addr = (void*)0x0a000008; + void *userspace_emulated_addr = (void*)ioremap(0x0a000008, 8);
readl(userspace_emulated_addr);
}
Quoted 6 lines
kvmtool ignores the MMIO exit reason if no device owns the IPA, that's why it also works on kvmtool.
The micro-bench test with the diff passes under qemu and kvmtool, tested with 4K, 16K and 64K pages on an odroid-c4.
Thanks Alex,
I think a better fix is this untested one below, though. If you can test it out and confirm it also resolves the issue, then I'll add this patch to the series.
Thanks,
drew
arm/micro-bench.c +22 -16
@@ -273,16 +273,22 @@ static void hvc_exec(void) asmvolatile ("mov w0, #0x4b000000; hvc #0" :::"w0" ); } -static void mmio_read_user_exec (void ) +/* +* FIXME: Read device-id in virtio mmio here in order to +* force an exit to userspace. This address needs to be +* updated in the future if any relevant changes in QEMU +* test-dev are made. +*/ +static void *userspace_emulated_addr; + +static bool mmio_read_user_prep (void ) { -/* -* FIXME: Read device-id in virtio mmio here in order to -* force an exit to userspace. This address needs to be -* updated in the future if any relevant changes in QEMU -* test-dev are made. -*/ -void *userspace_emulated_addr = (void *)0x0a000008 ; + userspace_emulated_addr = (void *)ioremap (0x0a000008 ,8 ); +return true; +} +static void mmio_read_user_exec (void ) +{readl (userspace_emulated_addr); }
@@ -309,14 +315,14 @@ struct exit_test { };static struct exit_test tests[] = { - {"hvc" ,NULL , hvc_exec,NULL ,65536 , true}, - {"mmio_read_user" ,NULL , mmio_read_user_exec,NULL ,65536 , true}, - {"mmio_read_vgic" ,NULL , mmio_read_vgic_exec,NULL ,65536 , true}, - {"eoi" ,NULL , eoi_exec,NULL ,65536 , true}, - {"ipi" , ipi_prep, ipi_exec,NULL ,65536 , true}, - {"ipi_hw" , ipi_hw_prep, ipi_exec,NULL ,65536 , true}, - {"lpi" , lpi_prep, lpi_exec,NULL ,65536 , true}, - {"timer_10ms" , timer_prep, timer_exec, timer_post,256 , true}, + {"hvc" ,NULL , hvc_exec,NULL ,65536 , true}, + {"mmio_read_user" , mmio_read_user_prep, mmio_read_user_exec,NULL ,65536 , true}, + {"mmio_read_vgic" ,NULL , mmio_read_vgic_exec,NULL ,65536 , true}, + {"eoi" ,NULL , eoi_exec,NULL ,65536 , true}, + {"ipi" , ipi_prep, ipi_exec,NULL ,65536 , true}, + {"ipi_hw" , ipi_hw_prep, ipi_exec,NULL ,65536 , true}, + {"lpi" , lpi_prep, lpi_exec,NULL ,65536 , true}, + {"timer_10ms" , timer_prep, timer_exec, timer_post,256 , true}, };struct ns_time {
Re: [PATCH kvm-unit-tests v3 4/8] arm/arm64: mmu: Stop mapping an assumed IO region
Quoted 159 lines · Andrew Jones
Quoted 92 lines · Alexandru Elisei
Hi Drew,
Quoted 20 lines · Alexandru Elisei
Hi Drew,
Quoted 10 lines · Andrew Jones
By providing a proper ioremap function, we can just rely on devices calling it for each region they need (as they already do) instead of mapping a big assumed I/O range. We don't require the MMU to be enabled at the time of the ioremap. In that case, we add the mapping to the identity map anyway. This allows us to call
setup_vmafterio_init. Why don't we just callsetup_vmbeforeio_init, I hear you ask? Well, that's because tests like sieve want to start with the MMU off, later callsetup_vm, and all the while have working I/O. Some unit tests are just really demanding...Quoted 2 lines
While at it, ensure we map the I/O regions with XN (execute never), as suggested by Alexandru Elisei.
I got to thinking why this wasn't an issue before. Under KVM, device memory is not usually mapped at stage 2, so any speculated reads wouldn't have reached memory at all. The only way I imagine that happening if the user was running kvm-unit-tests with a passthrough PCI device, which I don't think happens too often.
Quoted 4 lines
But we cannot rely on devices not being mapped at stage 2 when running under EFI (we're mapping them ourselves with ioremap), so I believe this is a good fix.
Had another look at the patch, looks good to me:
While testing the series I discovered that this patch introduces a bug when running under kvmtool.
Here's the splat:
$ ./configure --vmm=kvmtool --earlycon=uart,mmio,0x1000000 --page-size=4K && make clean && make -j6 && ./vm run -c2 -m128 -f arm/micro-bench.flat [..] # lkvm run --firmware arm/micro-bench.flat -m 128 -c 2 --name guest-6986 Info: Placing fdt at 0x80200000 - 0x80210000 chr_testdev_init: chr-testdev: can't find a virtio-console Timer Frequency 24000000 Hz (Output in microseconds)name total ns avg ns
--------------------------------------------------------------------------------------------
hvc 168674516.0
2573.0
Load address: 80000000
PC: 80000128 PC offset: 128
Unhandled exception ec=0x25 (DABT_EL1)
Vector: 4 (el1h_sync)
ESR_EL1: 96000006, ec=0x25 (DABT_EL1)FAR_EL1:000000000a000008(valid)
Exception frame registers:pc : [<0000000080000128>] lr : [<000000008000cac8>] pstate: 800003c5sp :
000000008003ff90
x29: 0000000000000000 x28: 0000000000000000
x27:00000011ada4d0c2x26: 0000000000000000
x25: 0000000080015978 x24:0000000080015a90
x23:0000048c27394fffx22:20c49ba5e353f7cf
x21:28f5c28f5c28f5c3x20:0000000080016af0
x19:000000e8d4a51000x18: 0000000080040000
x17: 0000000000000000 x16: 0000000080008210
x15:000000008003fe5cx14: 0000000000000260
x13:00000000000002a4x12: 0000000080040000
x11: 0000000000000001 x10: 0000000000000060
x9 : 0000000000000000 x8 : 0000000000000039
x7 : 0000000000000040 x6 : 0000000080013983
x5 :000000008003f74ex4 :000000008003f69c
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 :000000000a000008The issue is caused by the
mmio_read_user_exec()function fromarm/micro-bench.c. kvmtool doesn't have a chr-testdev device, and because probing fails, the address0x0a000008isn't ioremap'ed. The 0-1G memory region is not automatically mapped anymore, and the access triggers a data abort at stage 1.I fixed the splat with this change:
arm/micro-bench.c +1
-1@@ -281,7 +281,7 @@ static void mmio_read_user_exec(void)* updated in the future if any relevant changes in QEMU * test-dev are made. */ - void *userspace_emulated_addr = (void*)0x0a000008; + void *userspace_emulated_addr = (void*)ioremap(0x0a000008, 8);
readl(userspace_emulated_addr);
}Quoted 6 lines
kvmtool ignores the MMIO exit reason if no device owns the IPA, that's why it also works on kvmtool.
The micro-bench test with the diff passes under qemu and kvmtool, tested with 4K, 16K and 64K pages on an odroid-c4.
Thanks Alex,
I think a better fix is this untested one below, though. If you can test it out and confirm it also resolves the issue, then I'll add this patch to the series.
Thanks,
drewarm/micro-bench.c +15
-16@@ -273,16 +273,22 @@ static void hvc_exec(void) asmvolatile ("mov w0, #0x4b000000; hvc #0" :::"w0" ); } -static void mmio_read_user_exec (void ) +/* +* FIXME: Read device-id in virtio mmio here in order to +* force an exit to userspace. This address needs to be +* updated in the future if any relevant changes in QEMU +* test-dev are made. +*/ +static void *userspace_emulated_addr; + +static bool mmio_read_user_prep (void ) { -/* -* FIXME: Read device-id in virtio mmio here in order to -* force an exit to userspace. This address needs to be -* updated in the future if any relevant changes in QEMU -* test-dev are made. -*/ -void *userspace_emulated_addr = (void *)0x0a000008 ; + userspace_emulated_addr = (void *)ioremap (0x0a000008 ,8 ); +return true; +} +static void mmio_read_user_exec (void ) +{readl (userspace_emulated_addr); }@@ -309,14 +315,14 @@ struct exit_test { };static struct exit_test tests[] = { - {"hvc" ,NULL , hvc_exec,NULL ,65536 , true}, - {"mmio_read_user" ,NULL , mmio_read_user_exec,NULL ,65536 , true}, - {"mmio_read_vgic" ,NULL , mmio_read_vgic_exec,NULL ,65536 , true}, - {"eoi" ,NULL , eoi_exec,NULL ,65536 , true}, - {"ipi" , ipi_prep, ipi_exec,NULL ,65536 , true}, - {"ipi_hw" , ipi_hw_prep, ipi_exec,NULL ,65536 , true}, - {"lpi" , lpi_prep, lpi_exec,NULL ,65536 , true}, - {"timer_10ms" , timer_prep, timer_exec, timer_post,256 , true}, + {"hvc" ,NULL , hvc_exec,NULL ,65536 , true},
arm/micro-bench.c struct exit_test { · line 328
Quoted 10 lines
arm/micro-bench.c +7
-0+ {"mmio_read_user", mmio_read_user_prep, mmio_read_user_exec, NULL, 65536, true}, + {"mmio_read_vgic", NULL, mmio_read_vgic_exec, NULL, 65536, true}, + {"eoi", NULL, eoi_exec, NULL, 65536, true}, + {"ipi", ipi_prep, ipi_exec, NULL, 65536, true}, + {"ipi_hw", ipi_hw_prep, ipi_exec, NULL, 65536, true}, + {"lpi", lpi_prep, lpi_exec, NULL, 65536, true}, + {"timer_10ms", timer_prep, timer_exec, timer_post, 256, true}, }; struct ns_time {
I still haven't tested it (beyond compiling), but I've tweaked this a bit. You can see it here
https://gitlab.com/rhdrjones/kvm-unit-tests/-/commit/71938030d160e021db3388037d0d407df17e8e5e
The whole v4 of this series is here
https://gitlab.com/rhdrjones/kvm-unit-tests/-/commits/efiprep
Thanks,
drew
Re: [PATCH kvm-unit-tests v3 4/8] arm/arm64: mmu: Stop mapping an assumed IO region
Hi Drew,
Quoted 74 lines · Andrew Jones
Quoted 60 lines · Andrew Jones
[..]
Thanks Alex,I think a better fix is this untested one below, though. If you can test it out and confirm it also resolves the issue, then I'll add this patch to the series.
Thanks,
drewarm/micro-bench.c +15
-16@@ -273,16 +273,22 @@ static void hvc_exec(void) asmvolatile ("mov w0, #0x4b000000; hvc #0" :::"w0" ); } -static void mmio_read_user_exec (void ) +/* +* FIXME: Read device-id in virtio mmio here in order to +* force an exit to userspace. This address needs to be +* updated in the future if any relevant changes in QEMU +* test-dev are made. +*/ +static void *userspace_emulated_addr; + +static bool mmio_read_user_prep (void ) { -/* -* FIXME: Read device-id in virtio mmio here in order to -* force an exit to userspace. This address needs to be -* updated in the future if any relevant changes in QEMU -* test-dev are made. -*/ -void *userspace_emulated_addr = (void *)0x0a000008 ; + userspace_emulated_addr = (void *)ioremap (0x0a000008 ,8 ); +return true; +} +static void mmio_read_user_exec (void ) +{readl (userspace_emulated_addr); }@@ -309,14 +315,14 @@ struct exit_test { };static struct exit_test tests[] = { - {"hvc" ,NULL , hvc_exec,NULL ,65536 , true}, - {"mmio_read_user" ,NULL , mmio_read_user_exec,NULL ,65536 , true}, - {"mmio_read_vgic" ,NULL , mmio_read_vgic_exec,NULL ,65536 , true}, - {"eoi" ,NULL , eoi_exec,NULL ,65536 , true}, - {"ipi" , ipi_prep, ipi_exec,NULL ,65536 , true}, - {"ipi_hw" , ipi_hw_prep, ipi_exec,NULL ,65536 , true}, - {"lpi" , lpi_prep, lpi_exec,NULL ,65536 , true}, - {"timer_10ms" , timer_prep, timer_exec, timer_post,256 , true}, + {"hvc" ,NULL , hvc_exec,NULL ,65536 , true},arm/micro-bench.c struct exit_test { · line 328
Quoted 10 lines
arm/micro-bench.c +7
-0+ {"mmio_read_user", mmio_read_user_prep, mmio_read_user_exec, NULL, 65536, true}, + {"mmio_read_vgic", NULL, mmio_read_vgic_exec, NULL, 65536, true}, + {"eoi", NULL, eoi_exec, NULL, 65536, true}, + {"ipi", ipi_prep, ipi_exec, NULL, 65536, true}, + {"ipi_hw", ipi_hw_prep, ipi_exec, NULL, 65536, true}, + {"lpi", lpi_prep, lpi_exec, NULL, 65536, true}, + {"timer_10ms", timer_prep, timer_exec, timer_post, 256, true}, }; struct ns_time {I still haven't tested it (beyond compiling), but I've tweaked this a bit. You can see it here
Quoted 5 lines
https://gitlab.com/rhdrjones/kvm-unit-tests/-/commit/71938030d160e021db3388037d0d407df17e8e5e
The whole v4 of this series is here
https://gitlab.com/rhdrjones/kvm-unit-tests/-/commits/efiprep
Had a look at the patch, looks good; in my suggestion I wrongly thought that readl reads a long (64 bits), not an uint32_t value:
I also ran some tests on the v4 series from your repo.
Qemu TCG on x86 machine:
- arm compiled with arm-linux-gnu-gcc and arm-none-eabi-gcc
- arm64, 4k and 64k pages.
Odroid-c4:
- arm, both compilers, under kvmtool
- arm64, 4k, 16k and 64k pages under qemu KVM and kvmtool
Rockpro64:
- arm, both compilers, under kvmtool
- arm64, 4k and 64k pages, under qemu KVM and kvmtool.
The ITS migration tests I had to run manually on the rockpro64 (Odroid has a gicv2) because it looks like the run script wasn't detecting the prompt to start migration. I'm guessing something on my side, because I had issues with the migration tests before. Nonetheless, those tests ran just fine manually under qemu and kvmtool, so everything looks correct to me:
Thanks,
Alex
Re: [PATCH kvm-unit-tests v3 4/8] arm/arm64: mmu: Stop mapping an assumed IO region
Quoted 102 lines · Alexandru Elisei
Hi Drew,
Quoted 74 lines · Andrew Jones
Quoted 60 lines · Andrew Jones
[..]
Thanks Alex,I think a better fix is this untested one below, though. If you can test it out and confirm it also resolves the issue, then I'll add this patch to the series.
Thanks,
drewarm/micro-bench.c +15
-16@@ -273,16 +273,22 @@ static void hvc_exec(void) asmvolatile ("mov w0, #0x4b000000; hvc #0" :::"w0" ); } -static void mmio_read_user_exec (void ) +/* +* FIXME: Read device-id in virtio mmio here in order to +* force an exit to userspace. This address needs to be +* updated in the future if any relevant changes in QEMU +* test-dev are made. +*/ +static void *userspace_emulated_addr; + +static bool mmio_read_user_prep (void ) { -/* -* FIXME: Read device-id in virtio mmio here in order to -* force an exit to userspace. This address needs to be -* updated in the future if any relevant changes in QEMU -* test-dev are made. -*/ -void *userspace_emulated_addr = (void *)0x0a000008 ; + userspace_emulated_addr = (void *)ioremap (0x0a000008 ,8 ); +return true; +} +static void mmio_read_user_exec (void ) +{readl (userspace_emulated_addr); }@@ -309,14 +315,14 @@ struct exit_test { };static struct exit_test tests[] = { - {"hvc" ,NULL , hvc_exec,NULL ,65536 , true}, - {"mmio_read_user" ,NULL , mmio_read_user_exec,NULL ,65536 , true}, - {"mmio_read_vgic" ,NULL , mmio_read_vgic_exec,NULL ,65536 , true}, - {"eoi" ,NULL , eoi_exec,NULL ,65536 , true}, - {"ipi" , ipi_prep, ipi_exec,NULL ,65536 , true}, - {"ipi_hw" , ipi_hw_prep, ipi_exec,NULL ,65536 , true}, - {"lpi" , lpi_prep, lpi_exec,NULL ,65536 , true}, - {"timer_10ms" , timer_prep, timer_exec, timer_post,256 , true}, + {"hvc" ,NULL , hvc_exec,NULL ,65536 , true},arm/micro-bench.c struct exit_test { · line 328
Quoted 10 lines
arm/micro-bench.c +7
-0+ {"mmio_read_user", mmio_read_user_prep, mmio_read_user_exec, NULL, 65536, true}, + {"mmio_read_vgic", NULL, mmio_read_vgic_exec, NULL, 65536, true}, + {"eoi", NULL, eoi_exec, NULL, 65536, true}, + {"ipi", ipi_prep, ipi_exec, NULL, 65536, true}, + {"ipi_hw", ipi_hw_prep, ipi_exec, NULL, 65536, true}, + {"lpi", lpi_prep, lpi_exec, NULL, 65536, true}, + {"timer_10ms", timer_prep, timer_exec, timer_post, 256, true}, }; struct ns_time {I still haven't tested it (beyond compiling), but I've tweaked this a bit. You can see it here
Quoted 5 lines
https://gitlab.com/rhdrjones/kvm-unit-tests/-/commit/71938030d160e021db3388037d0d407df17e8e5e
The whole v4 of this series is here
https://gitlab.com/rhdrjones/kvm-unit-tests/-/commits/efiprep
Had a look at the patch, looks good; in my suggestion I wrongly thought that readl reads a long (64 bits), not an
uint32_tvalue:Reviewed-by Alexandru Elisei <[email protected]>I also ran some tests on the v4 series from your repo.
Qemu TCG on x86 machine:
- arm compiled with arm-linux-gnu-gcc and arm-none-eabi-gcc
- arm64, 4k and 64k pages.Odroid-c4:
- arm, both compilers, under kvmtool
- arm64, 4k, 16k and 64k pages under qemu KVM and kvmtoolRockpro64:
- arm, both compilers, under kvmtool
- arm64, 4k and 64k pages, under qemu KVM and kvmtool.
Quoted 8 lines
The ITS migration tests I had to run manually on the rockpro64 (Odroid has a gicv2) because it looks like the run script wasn't detecting the prompt to start migration. I'm guessing something on my side, because I had issues with the migration tests before. Nonetheless, those tests ran just fine manually under qemu and kvmtool, so everything looks correct to me:
Tested-by Alexandru Elisei <[email protected]>
Thanks Alex! I've added your tags, applied to arm/queue and sent the pull request.
Thanks,
drew
PATCH v3 5/8 arm/arm64: mmu: Remove memory layout assumptions
In reply to Andrew JonesRather than making too many assumptions about the memory layout in mmu code, just set up the page tables per the memory regions (which means putting all the memory layout assumptions in setup). To ensure we get the right default flags set we need to split the primary region into two regions for code and data.
We still only expect the primary regions to be present, but the next patch will remove that assumption too.
(Unfortunately we still have an assumption in setup_mmu. We assume
the range 3G-4G is available for the virtual memory allocator. We'll need to remove that assumption as well with another patch in order to support arbitrary memory maps.)
--- lib/arm/asm/setup.h | 1 + lib/arm/mmu.c | 26 +++++++++++++++----------- lib/arm/setup.c | 29 +++++++++++++++++++++-------- 3 files changed, 37 insertions(+), 19 deletions(-)
lib/arm/asm/setup.h +1 -0
@@ -15,6 +15,7 @@ extern int nr_cpus;#define MR_F_PRIMARY (1U << 0)#define MR_F_IO (1U << 1) +#define MR_F_CODE (1U << 2)#define MR_F_UNKNOWN (1U << 31)struct mem_region {
lib/arm/mmu.c +15 -11
@@ -20,8 +20,6 @@#include <linux/compiler.h> -extern unsigned long etext; -pgd_t *mmu_idmap;/* CPU 0 starts with disabled MMU */
@@ -157,7 +155,7 @@ void mmu_set_range_sect(pgd_t *pgtable, uintptr_t virt_offset,void *setup_mmu (phys_addr_t phys_end) { -uintptr_t code_end = (uintptr_t )&etext; +struct mem_region *r;/* 3G-4G region is reserved for vmalloc, cap phys_end at 3G */ if (phys_end > (3ul <<30 ))
@@ -173,14 +171,20 @@ void *setup_mmu(phys_addr_t phys_end)if (!mmu_idmap) mmu_idmap =alloc_page (); -/* armv8 requires code shared between EL1 and EL0 to be read-only */ -mmu_set_range_ptes (mmu_idmap,PHYS_OFFSET , -PHYS_OFFSET , code_end, -__pgprot (PTE_WBWA |PTE_RDONLY |PTE_USER )); - -mmu_set_range_ptes (mmu_idmap, code_end, - code_end, phys_end, -__pgprot (PTE_WBWA |PTE_USER )); +for (r = mem_regions; r->end; ++r) { +if (r->flags &MR_F_IO ) { +continue ; + }else if (r->flags &MR_F_CODE ) { +assert_msg (r->flags &MR_F_PRIMARY ,"Unexpected code region" ); +/* armv8 requires code shared between EL1 and EL0 to be read-only */ +mmu_set_range_ptes (mmu_idmap, r->start, r->start, r->end, +__pgprot (PTE_WBWA |PTE_USER |PTE_RDONLY )); + }else { +assert_msg (r->flags &MR_F_PRIMARY ,"Unexpected data region" ); +mmu_set_range_ptes (mmu_idmap, r->start, r->start, r->end, +__pgprot (PTE_WBWA |PTE_USER )); + } + }mmu_enable (mmu_idmap);return mmu_idmap;
lib/arm/setup.c +21 -8
@@ -31,6 +31,7 @@#define NR_INITIAL_MEM_REGIONS 16extern unsigned long stacktop; +extern unsigned long etext;struct timer_state __timer_state;
@@ -88,10 +89,12 @@ unsigned int mem_region_get_flags(phys_addr_t paddr)static void mem_init (phys_addr_t freemem_start) { +phys_addr_t code_end = (phys_addr_t )(unsigned long )&etext;struct dt_pbus_reg regs[NR_INITIAL_MEM_REGIONS ]; -struct mem_region primary, mem = { +struct mem_region mem = { .start = (phys_addr_t)-1 , }; +struct mem_region *primary =NULL ;phys_addr_t base, top;int nr_regs, nr_io =0 , i;
@@ -110,8 +113,6 @@ static void mem_init(phys_addr_t freemem_start) nr_regs =dt_get_memory_params (regs,NR_INITIAL_MEM_REGIONS - nr_io);assert (nr_regs >0 ); - primary = (struct mem_region ){0 }; -for (i =0 ; i < nr_regs; ++i) {struct mem_region *r = &mem_regions[nr_io + i];
@@ -123,7 +124,7 @@ static void mem_init(phys_addr_t freemem_start)*/ if (freemem_start >= r->start && freemem_start < r->end) { r->flags |=MR_F_PRIMARY ; - primary = *r; + primary = r; }/*
@@ -135,13 +136,25 @@ static void mem_init(phys_addr_t freemem_start)if (r->end > mem.end) mem.end = r->end; } -assert (primary.end !=0 ); +assert (primary);assert (!(mem.start & ~PHYS_MASK ) && !((mem.end -1 ) & ~PHYS_MASK )); - __phys_offset = primary.start;/* PHYS_OFFSET */ - __phys_end = primary.end;/* PHYS_END */ + __phys_offset = primary->start;/* PHYS_OFFSET */ + __phys_end = primary->end;/* PHYS_END */ + +/* Split the primary region into two regions; code and data */ + mem_regions[nr_io + i] = (struct mem_region ){ + .start = code_end, + .end = primary->end, + .flags =MR_F_PRIMARY , + }; + *primary = (struct mem_region ){ + .start = primary->start, + .end = code_end, + .flags =MR_F_PRIMARY |MR_F_CODE , + }; -phys_alloc_init (freemem_start, primary.end - freemem_start); +phys_alloc_init (freemem_start, __phys_end - freemem_start);phys_alloc_set_minimum_alignment (SMP_CACHE_BYTES );phys_alloc_get_unused (&base, &top);
Signature · 1 line
2.30.2
PATCH v3 6/8 arm/arm64: setup: Consolidate memory layout assumptions
In reply to Andrew JonesKeep as much memory layout assumptions as possible in init::start and a single setup function. This prepares us for calling setup() from different start functions which have been linked with different linker scripts. To do this, stacktop is only referenced from init::start, making freemem_start a parameter to setup(). We also split mem_init() into three parts, one that populates the mem regions per the DT, one that populates the mem regions per assumptions, and one that does the mem init. The concept of a primary region is dropped, but we add a sanity check for the absence of memory holes, because we don't know how to deal with them yet.
--- arm/cstart.S | 4 +- arm/cstart64.S | 2 + arm/flat.lds | 23 ++++++ lib/arm/asm/setup.h | 8 +- lib/arm/mmu.c | 2 - lib/arm/setup.c | 175 ++++++++++++++++++++++++-------------------- 6 files changed, 128 insertions(+), 86 deletions(-)
arm/cstart.S +3 -1
@@ -80,7 +80,9 @@ start: /* complete setup */ pop {r0-r1} - bl setup + mov r3, #0 + ldr r2, =stacktop @ r2,r3 is the base of free memory + bl setup @ r0 is the addr of the dtb /* run the test */ ldr r0, =__argc
arm/cstart64.S +2 -0
@@ -92,6 +92,8 @@ start: bl exceptions_init /* complete setup */ + adrp x1, stacktop + add x1, x1, :lo12:stacktop // x1 is the base of free memory bl setup // x0 is the addr of the dtb /* run the test */
arm/flat.lds +23 -0
@@ -1,3 +1,26 @@ +/* + * init::start will pass stacktop to setup() as the base of free memory. + * setup() will then move the FDT and initrd to that base before calling + * mem_init(). With those movements and this linker script, we'll end up + * having the following memory layout: + * + * +----------------------+ <-- top of physical memory + * | | + * ~ ~ + * | | + * +----------------------+ <-- top of initrd + * | | + * +----------------------+ <-- top of FDT + * | | + * +----------------------+ <-- top of cpu0's stack + * | | + * +----------------------+ <-- top of text/data/bss sections + * | | + * | | + * +----------------------+ <-- load address + * | | + * +----------------------+ <-- physical address 0x0 + */ SECTIONS {
lib/arm/asm/setup.h +4 -4
@@ -13,9 +13,8 @@extern u64 cpus[NR_CPUS ];/* per-cpu IDs (MPIDRs) */ extern int nr_cpus; -#define MR_F_PRIMARY (1U << 0) -#define MR_F_IO (1U << 1) -#define MR_F_CODE (1U << 2) +#define MR_F_IO (1U << 0) +#define MR_F_CODE (1U << 1)#define MR_F_UNKNOWN (1U << 31)struct mem_region {
@@ -26,6 +25,7 @@ struct mem_region {extern struct mem_region *mem_regions;extern phys_addr_t __phys_offset, __phys_end; +extern struct mem_region *mem_region_find (phys_addr_t paddr);extern unsigned int mem_region_get_flags (phys_addr_t paddr);#define PHYS_OFFSET (__phys_offset)
@@ -35,6 +35,6 @@ extern unsigned int mem_region_get_flags(phys_addr_t paddr);#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)#define SMP_CACHE_BYTES L1_CACHE_BYTES -void setup (const void *fdt); +void setup (const void *fdt,phys_addr_t freemem_start);#endif /* _ASMARM_SETUP_H_ */
lib/arm/mmu.c +0 -2
@@ -175,12 +175,10 @@ void *setup_mmu(phys_addr_t phys_end)if (r->flags &MR_F_IO ) {continue ; }else if (r->flags &MR_F_CODE ) { -assert_msg (r->flags &MR_F_PRIMARY ,"Unexpected code region" );/* armv8 requires code shared between EL1 and EL0 to be read-only */ mmu_set_range_ptes (mmu_idmap, r->start, r->start, r->end,__pgprot (PTE_WBWA |PTE_USER |PTE_RDONLY )); }else { -assert_msg (r->flags &MR_F_PRIMARY ,"Unexpected data region" );mmu_set_range_ptes (mmu_idmap, r->start, r->start, r->end,__pgprot (PTE_WBWA |PTE_USER )); }
lib/arm/setup.c +96 -79
238 lines not on this page · raw message
Signature · 1 line
2.30.2
Re: [PATCH kvm-unit-tests v3 6/8] arm/arm64: setup: Consolidate memory layout assumptions
Hi Drew,
Quoted 10 lines · Andrew Jones
Keep as much memory layout assumptions as possible in
init::startand a single setup function. This prepares us for callingsetup()from different start functions which have been linked with different linker scripts. To do this, stacktop is only referenced frominit::start, makingfreemem_starta parameter tosetup(). We also splitmem_init()into three parts, one that populates the mem regions per the DT, one that populates the mem regions per assumptions, and one that does the mem init. The concept of a primary region is dropped, but we add a sanity check for the absence of memory holes, because we don't know how to deal with them yet.
Looks good to me:
Thanks,
Alex
Quoted 368 lines
Reviewed-by Nikos Nikoleris <[email protected]>Signed-off-by Andrew Jones <[email protected]>--- arm/cstart.S | 4 +- arm/cstart64.S | 2 + arm/flat.lds | 23 ++++++ lib/arm/asm/setup.h | 8 +- lib/arm/mmu.c | 2 - lib/arm/setup.c | 175 ++++++++++++++++++++++++-------------------- 6 files changed, 128 insertions(+), 86 deletions(-)arm/cstart.S +3
-1@@ -80,7 +80,9 @@ start: /* complete setup */ pop {r0-r1} - bl setup + mov r3, #0 + ldr r2, =stacktop @ r2,r3 is the base of free memory + bl setup @ r0 is the addr of the dtb /* run the test */ ldr r0, =__argcarm/cstart64.S +2
-0@@ -92,6 +92,8 @@ start: bl exceptions_init /* complete setup */ + adrp x1, stacktop + add x1, x1, :lo12:stacktop // x1 is the base of free memory bl setup // x0 is the addr of the dtb /* run the test */arm/flat.lds +23
-0@@ -1,3 +1,26 @@ +/* + * init::start will pass stacktop to setup() as the base of free memory. + * setup() will then move the FDT and initrd to that base before calling + * mem_init(). With those movements and this linker script, we'll end up + * having the following memory layout: + * + * +----------------------+ <-- top of physical memory + * | | + * ~ ~ + * | | + * +----------------------+ <-- top of initrd + * | | + * +----------------------+ <-- top of FDT + * | | + * +----------------------+ <-- top of cpu0's stack + * | | + * +----------------------+ <-- top of text/data/bss sections + * | | + * | | + * +----------------------+ <-- load address + * | | + * +----------------------+ <-- physical address 0x0 + */ SECTIONS {lib/arm/asm/setup.h +4
-4@@ -13,9 +13,8 @@extern u64 cpus[NR_CPUS ];/* per-cpu IDs (MPIDRs) */ extern int nr_cpus; -#define MR_F_PRIMARY (1U << 0) -#define MR_F_IO (1U << 1) -#define MR_F_CODE (1U << 2) +#define MR_F_IO (1U << 0) +#define MR_F_CODE (1U << 1)#define MR_F_UNKNOWN (1U << 31)struct mem_region {@@ -26,6 +25,7 @@ struct mem_region {extern struct mem_region *mem_regions;extern phys_addr_t __phys_offset, __phys_end; +extern struct mem_region *mem_region_find (phys_addr_t paddr);extern unsigned int mem_region_get_flags (phys_addr_t paddr);#define PHYS_OFFSET (__phys_offset)@@ -35,6 +35,6 @@ extern unsigned int mem_region_get_flags(phys_addr_t paddr);#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)#define SMP_CACHE_BYTES L1_CACHE_BYTES -void setup (const void *fdt); +void setup (const void *fdt,phys_addr_t freemem_start);#endif /* _ASMARM_SETUP_H_ */ lib/arm/mmu.c +0
-2@@ -175,12 +175,10 @@ void *setup_mmu(phys_addr_t phys_end)if (r->flags &MR_F_IO ) {continue ; }else if (r->flags &MR_F_CODE ) { -assert_msg (r->flags &MR_F_PRIMARY ,"Unexpected code region" );/* armv8 requires code shared between EL1 and EL0 to be read-only */ mmu_set_range_ptes (mmu_idmap, r->start, r->start, r->end,__pgprot (PTE_WBWA |PTE_USER |PTE_RDONLY )); }else { -assert_msg (r->flags &MR_F_PRIMARY ,"Unexpected data region" );mmu_set_range_ptes (mmu_idmap, r->start, r->start, r->end,__pgprot (PTE_WBWA |PTE_USER )); }lib/arm/setup.c +96
-79@@ -28,9 +28,10 @@#include "io.h" -#define NR_INITIAL_MEM_REGIONS 16 +#define MAX_DT_MEM_REGIONS 16 +#define NR_EXTRA_MEM_REGIONS 16 +#define NR_INITIAL_MEM_REGIONS (MAX_DT_MEM_REGIONS + NR_EXTRA_MEM_REGIONS) -extern unsigned long stacktop;extern unsigned long etext;struct timer_state __timer_state;@@ -75,28 +76,68 @@ static void cpu_init(void)set_cpu_online (0 , true); } -unsigned int mem_region_get_flags (phys_addr_t paddr) +static void mem_region_add (struct mem_region *r) +{ +struct mem_region *r_next = mem_regions; +int i =0 ; + +for (; r_next->end; ++r_next, ++i) + ; +assert (i <NR_INITIAL_MEM_REGIONS ); + + *r_next = *r; +} + +static void mem_regions_add_dt_regions (void ) +{ +struct dt_pbus_reg regs[MAX_DT_MEM_REGIONS ]; +int nr_regs, i; + + nr_regs =dt_get_memory_params (regs,MAX_DT_MEM_REGIONS ); +assert (nr_regs >0 ); + +for (i =0 ; i < nr_regs; ++i) { +mem_region_add (&(struct mem_region ){ + .start = regs[i].addr, + .end = regs[i].addr + regs[i].size, + }); + } +} + +struct mem_region *mem_region_find (phys_addr_t paddr) {struct mem_region *r; -for (r = mem_regions; r->end; ++r) { +for (r = mem_regions; r->end; ++r)if (paddr >= r->start && paddr < r->end) -return r->flags; - } +return r; +return NULL ; +} -return MR_F_UNKNOWN ; +unsigned int mem_region_get_flags (phys_addr_t paddr) +{ +struct mem_region *r =mem_region_find (paddr); +return r ? r->flags :MR_F_UNKNOWN ; } -static void mem_init (phys_addr_t freemem_start) +static void mem_regions_add_assumed (void ) {phys_addr_t code_end = (phys_addr_t )(unsigned long )&etext; -struct dt_pbus_reg regs[NR_INITIAL_MEM_REGIONS ]; -struct mem_region mem = { - .start = (phys_addr_t)-1 , +struct mem_region *r; + + r =mem_region_find (code_end -1 ); +assert (r); + +/* Split the region with the code into two regions; code and data */ +mem_region_add (&(struct mem_region ){ + .start = code_end, + .end = r->end, + }); + *r = (struct mem_region ){ + .start = r->start, + .end = code_end, + .flags =MR_F_CODE , }; -struct mem_region *primary =NULL ; -phys_addr_t base, top; -int nr_regs, nr_io =0 , i;/* * mach-virt I/O regions: @@ -104,57 +145,47 @@ static void mem_init(phys_addr_t freemem_start)* - 512M at 256G (arm64, arm uses highmem=off) * - 512G at 512G (arm64, arm uses highmem=off) */ - mem_regions[nr_io++] = (struct mem_region ){0 , (1ul <<30 ),MR_F_IO }; +mem_region_add (&(struct mem_region ){0 , (1ul <<30 ),MR_F_IO });#ifdef __aarch64__ - mem_regions[nr_io++] = (struct mem_region ){ (1ul <<38 ), (1ul <<38 ) | (1ul <<29 ),MR_F_IO }; - mem_regions[nr_io++] = (struct mem_region ){ (1ul <<39 ), (1ul <<40 ),MR_F_IO }; +mem_region_add (&(struct mem_region ){ (1ul <<38 ), (1ul <<38 ) | (1ul <<29 ),MR_F_IO }); +mem_region_add (&(struct mem_region ){ (1ul <<39 ), (1ul <<40 ),MR_F_IO });#endif +} - nr_regs =dt_get_memory_params (regs,NR_INITIAL_MEM_REGIONS - nr_io); -assert (nr_regs >0 ); - -for (i =0 ; i < nr_regs; ++i) { -struct mem_region *r = &mem_regions[nr_io + i]; +static void mem_init (phys_addr_t freemem_start) +{ +phys_addr_t base, top; +struct mem_region *freemem, *r, mem = { + .start = (phys_addr_t)-1 , + }; - r->start = regs[i].addr; - r->end = regs[i].addr + regs[i].size; + freemem =mem_region_find (freemem_start); +assert (freemem && !(freemem->flags & (MR_F_IO |MR_F_CODE ))); -/* -* pick the region we're in for our primary region -*/ -if (freemem_start >= r->start && freemem_start < r->end) { - r->flags |=MR_F_PRIMARY ; - primary = r; +for (r = mem_regions; r->end; ++r) { +if (!(r->flags &MR_F_IO )) { +if (r->start < mem.start) + mem.start = r->start; +if (r->end > mem.end) + mem.end = r->end; } - -/* -* set the lowest and highest addresses found, -* ignoring potential gaps -*/ -if (r->start < mem.start) - mem.start = r->start; -if (r->end > mem.end) - mem.end = r->end; } -assert (primary); -assert (!(mem.start & ~PHYS_MASK ) && !((mem.end -1 ) & ~PHYS_MASK )); +assert (mem.end && !(mem.start & ~PHYS_MASK )); + mem.end &=PHYS_MASK ; - __phys_offset = primary->start;/* PHYS_OFFSET */ - __phys_end = primary->end;/* PHYS_END */ +/* Check for holes */ + r =mem_region_find (mem.start); +while (r && r->end != mem.end) + r =mem_region_find (r->end); +assert (r); -/* Split the primary region into two regions; code and data */ - mem_regions[nr_io + i] = (struct mem_region ){ - .start = code_end, - .end = primary->end, - .flags =MR_F_PRIMARY , - }; - *primary = (struct mem_region ){ - .start = primary->start, - .end = code_end, - .flags =MR_F_PRIMARY |MR_F_CODE , - }; +/* Ensure our selected freemem range is somewhere in our full range */ +assert (freemem_start >= mem.start && freemem->end <= mem.end); -phys_alloc_init (freemem_start, __phys_end - freemem_start); + __phys_offset = mem.start;/* PHYS_OFFSET */ + __phys_end = mem.end;/* PHYS_END */ + +phys_alloc_init (freemem_start, freemem->end - freemem_start);phys_alloc_set_minimum_alignment (SMP_CACHE_BYTES );phys_alloc_get_unused (&base, &top);@@ -204,35 +235,17 @@ static void timer_save_state(void) __timer_state.vtimer.irq_flags =fdt32_to_cpu (data[8 ]); } -void setup (const void *fdt) +void setup (const void *fdt,phys_addr_t freemem_start) { -void *freemem = &stacktop; +void *freemem;const char *bootargs, *tmp;u32 fdt_size;int ret; -/* -* Before calling mem_init we need to move the fdt and initrd -* to safe locations. We move them to construct the memory -* map illustrated below: -* -* +----------------------+ <-- top of physical memory -* | | -* ~ ~ -* | | -* +----------------------+ <-- top of initrd -* | | -* +----------------------+ <-- top of FDT -* | | -* +----------------------+ <-- top of cpu0's stack -* | | -* +----------------------+ <-- top of text/data/bss sections, -* | | see arm/flat.lds -* | | -* +----------------------+ <-- load address -* | | -* +----------------------+ -*/ +assert (sizeof (long ) ==8 || freemem_start < (3ul <<30 )); + freemem = (void *)(unsigned long )freemem_start; + +/* Move the FDT to the base of free memory */ fdt_size =fdt_totalsize (fdt); ret =fdt_move (fdt, freemem, fdt_size);assert (ret ==0 );@@ -240,6 +253,7 @@ void setup(const void *fdt)assert (ret ==0 ); freemem += fdt_size; +/* Move the initrd to the top of the FDT */ ret =dt_get_initrd (&tmp, &initrd_size);assert (ret ==0 || ret == -FDT_ERR_NOTFOUND );if (ret ==0 ) {@@ -248,7 +262,10 @@ void setup(const void *fdt) freemem += initrd_size; } +mem_regions_add_dt_regions (); +mem_regions_add_assumed ();mem_init (PAGE_ALIGN ((unsigned long )freemem)); +cpu_init ();/* cpu_init must be called before thread_info_init */
PATCH v3 7/8 chr-testdev: Silently fail init
In reply to Andrew JonesIf there's no virtio-console / chr-testdev configured, then the user probably didn't want them. Just silently fail rather than stating the obvious.
--- lib/chr-testdev.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
lib/chr-testdev.c +1 -4
@@ -54,11 +54,8 @@ void chr_testdev_init(void)int ret; vcon =virtio_bind (VIRTIO_ID_CONSOLE ); -if (vcon ==NULL ) { -printf ("%s: %s: can't find a virtio-console\n" , - __func__,TESTDEV_NAME ); +if (vcon ==NULL )return ; - } ret = vcon->config->find_vqs (vcon,2 , vqs,NULL , io_names);if (ret <0 ) {
Signature · 1 line
2.30.2
PATCH v3 8/8 arm/arm64: psci: Don't assume method is hvc
In reply to Andrew JonesThe method can be smc in addition to hvc, and it will be when running on bare metal. Additionally, we move the invocations to assembly so we don't have to rely on compiler assumptions. We also fix the prototype of psci_invoke. It should return long, not int, and function_id should be an unsigned int, not an unsigned long.
--- arm/cstart.S | 22 ++++++++++++++++++++++ arm/cstart64.S | 22 ++++++++++++++++++++++ arm/selftest.c | 34 +++++++--------------------------- lib/arm/asm/psci.h | 10 ++++++++-- lib/arm/psci.c | 35 +++++++++++++++++++++++++++-------- lib/arm/setup.c | 2 ++ 6 files changed, 88 insertions(+), 37 deletions(-)
arm/cstart.S +22 -0
@@ -95,6 +95,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * r0 -- function_id + * r1 -- arg0 + * r2 -- arg1 + * r3 -- arg2 + * + * Outputs: + * r0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + mov pc, lr + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + mov pc, lr + enable_vfp: /* Enable full access to CP10 and CP11: */ mov r0, #(3 << 22 | 3 << 20)
arm/cstart64.S +22 -0
@@ -109,6 +109,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * w0 -- function_id + * x1 -- arg0 + * x2 -- arg1 + * x3 -- arg2 + * + * Outputs: + * x0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + ret + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + ret + get_mmu_off: adrp x0, auxinfo ldr x0, [x0, :lo12:auxinfo + 8]
arm/selftest.c +7 -27
@@ -400,33 +400,13 @@ static void check_vectors(void *arg __unused)exit (report_summary ()); } -static bool psci_check (void ) +static void psci_print (void ) { -const struct fdt_property *method; -int node, len, ver; - - node =fdt_node_offset_by_compatible (dt_fdt (),-1 ,"arm,psci-0.2" ); -if (node <0 ) { -printf ("PSCI v0.2 compatibility required\n" ); -return false; - } - - method =fdt_get_property (dt_fdt (), node,"method" , &len); -if (method ==NULL ) { -printf ("bad psci device tree node\n" ); -return false; - } - -if (len <4 ||strcmp (method->data,"hvc" ) !=0 ) { -printf ("psci method must be hvc\n" ); -return false; - } - - ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); -printf ("PSCI version %d.%d\n" ,PSCI_VERSION_MAJOR (ver), -PSCI_VERSION_MINOR (ver)); - -return true; +int ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); +report_info ("PSCI version: %d.%d" ,PSCI_VERSION_MAJOR (ver), +PSCI_VERSION_MINOR (ver)); +report_info ("PSCI method: %s" , psci_invoke == psci_invoke_hvc ? +"hvc" :"smc" ); } static void cpu_report(void *data __unused)
@@ -465,7 +445,7 @@ int main(int argc, char **argv) }else if (strcmp (argv[1 ],"smp" ) ==0 ) { -report (psci_check (),"PSCI version" ); +psci_print ();on_cpus (cpu_report,NULL );while (!cpumask_full (&ready))cpu_relax ();
lib/arm/asm/psci.h +8 -2
@@ -3,8 +3,14 @@#include <libcflat.h> #include <linux/psci.h> -extern int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2); +typedef long (*psci_invoke_fn )(unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern psci_invoke_fn psci_invoke; +extern long psci_invoke_hvc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern long psci_invoke_smc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern void psci_set_conduit (void );extern int psci_cpu_on (unsigned long cpuid,unsigned long entry_point);extern void psci_system_reset (void );extern int cpu_psci_cpu_boot (unsigned int cpu);
lib/arm/psci.c +27 -8
@@ -6,22 +6,21 @@* * This work is licensed under the terms of the GNU LGPL, version 2. */ +#include <devicetree.h> #include <asm/psci.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/smp.h> -__attribute__((noinline)) -int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2) +static long psci_invoke_none (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2) { - asmvolatile ( -"hvc #0" - :"+r" (function_id) - :"r" (arg0),"r" (arg1),"r" (arg2)); -return function_id; +printf ("No PSCI method configured! Can't invoke...\n" ); +return PSCI_RET_NOT_PRESENT ; } +psci_invoke_fn psci_invoke = psci_invoke_none; +int psci_cpu_on (unsigned long cpuid,unsigned long entry_point) {#ifdef __arm__
@@ -56,3 +55,23 @@ void psci_system_off(void)int err =psci_invoke (PSCI_0_2_FN_SYSTEM_OFF ,0 ,0 ,0 );printf ("CPU%d unable to do system off (error = %d)\n" ,smp_processor_id (), err); } + +void psci_set_conduit (void ) +{ +const void *fdt =dt_fdt (); +const struct fdt_property *method; +int node, len; + + node =fdt_node_offset_by_compatible (fdt,-1 ,"arm,psci-0.2" ); +assert_msg (node >=0 ,"PSCI v0.2 compatibility required" ); + + method =fdt_get_property (fdt, node,"method" , &len); +assert (method !=NULL && len ==4 ); + +if (strcmp (method->data,"hvc" ) ==0 ) + psci_invoke = psci_invoke_hvc; +else if (strcmp (method->data,"smc" ) ==0 ) + psci_invoke = psci_invoke_smc; +else +assert_msg (false,"Unknown PSCI conduit: %s" , method->data); +}
lib/arm/setup.c +2 -0
@@ -25,6 +25,7 @@#include <asm/processor.h> #include <asm/smp.h> #include <asm/timer.h> +#include <asm/psci.h> #include "io.h"
@@ -266,6 +267,7 @@ void setup(const void *fdt, phys_addr_t freemem_start)mem_regions_add_assumed ();mem_init (PAGE_ALIGN ((unsigned long )freemem)); +psci_set_conduit ();cpu_init ();/* cpu_init must be called before thread_info_init */
Signature · 1 line
2.30.2
Re: [PATCH kvm-unit-tests v3 8/8] arm/arm64: psci: Don't assume method is hvc
Hi Drew,
Quoted 5 lines · Andrew Jones
The method can be smc in addition to hvc, and it will be when running on bare metal. Additionally, we move the invocations to assembly so we don't have to rely on compiler assumptions. We also fix the prototype of
psci_invoke. It should return long, not int, andfunction_idshould be an unsigned int, not an unsigned long.
Sorry to harp on this again, but to be honest, it's still not clear to me why the psci_invoke_{hvc,smc} functions return a long int.
If we only expect the PSCI functions to return error codes, then the PSCI spec says these are 32-bit signed integers. If we want to support PSCI functions returning other values, like PSCI_STAT_{RESIDENCY,COUNT}, then the invoke functions should return an unsigned value.
The only case we're supporting is the error return for the SMC calling convention (which says that error codes are 32/64bit signed integers). Since the commit specifically mentions this change, I think some explanation why this width was chosen would be appropriate. Unless it's painfully obvious and I'm just not seeing it, which is a possibility.
Other than that, the patch looks good. I'll some tests to make sure everything is in order.
Thanks,
Alex
Quoted 229 lines
Signed-off-by Andrew Jones <[email protected]>--- arm/cstart.S | 22 ++++++++++++++++++++++ arm/cstart64.S | 22 ++++++++++++++++++++++ arm/selftest.c | 34 +++++++--------------------------- lib/arm/asm/psci.h | 10 ++++++++-- lib/arm/psci.c | 35 +++++++++++++++++++++++++++-------- lib/arm/setup.c | 2 ++ 6 files changed, 88 insertions(+), 37 deletions(-)arm/cstart.S +22
-0@@ -95,6 +95,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * r0 -- function_id + * r1 -- arg0 + * r2 -- arg1 + * r3 -- arg2 + * + * Outputs: + * r0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + mov pc, lr + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + mov pc, lr + enable_vfp: /* Enable full access to CP10 and CP11: */ mov r0, #(3 << 22 | 3 << 20)arm/cstart64.S +22
-0@@ -109,6 +109,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * w0 -- function_id + * x1 -- arg0 + * x2 -- arg1 + * x3 -- arg2 + * + * Outputs: + * x0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + ret + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + ret + get_mmu_off: adrp x0, auxinfo ldr x0, [x0, :lo12:auxinfo + 8]arm/selftest.c +7
-27@@ -400,33 +400,13 @@ static void check_vectors(void *arg __unused)exit (report_summary ()); } -static bool psci_check (void ) +static void psci_print (void ) { -const struct fdt_property *method; -int node, len, ver; - - node =fdt_node_offset_by_compatible (dt_fdt (),-1 ,"arm,psci-0.2" ); -if (node <0 ) { -printf ("PSCI v0.2 compatibility required\n" ); -return false; - } - - method =fdt_get_property (dt_fdt (), node,"method" , &len); -if (method ==NULL ) { -printf ("bad psci device tree node\n" ); -return false; - } - -if (len <4 ||strcmp (method->data,"hvc" ) !=0 ) { -printf ("psci method must be hvc\n" ); -return false; - } - - ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); -printf ("PSCI version %d.%d\n" ,PSCI_VERSION_MAJOR (ver), -PSCI_VERSION_MINOR (ver)); - -return true; +int ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); +report_info ("PSCI version: %d.%d" ,PSCI_VERSION_MAJOR (ver), +PSCI_VERSION_MINOR (ver)); +report_info ("PSCI method: %s" , psci_invoke == psci_invoke_hvc ? +"hvc" :"smc" ); } static void cpu_report(void *data __unused)@@ -465,7 +445,7 @@ int main(int argc, char **argv) }else if (strcmp (argv[1 ],"smp" ) ==0 ) { -report (psci_check (),"PSCI version" ); +psci_print ();on_cpus (cpu_report,NULL );while (!cpumask_full (&ready))cpu_relax ();lib/arm/asm/psci.h +8
-2@@ -3,8 +3,14 @@#include <libcflat.h> #include <linux/psci.h> -extern int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2); +typedef long (*psci_invoke_fn )(unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern psci_invoke_fn psci_invoke; +extern long psci_invoke_hvc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern long psci_invoke_smc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern void psci_set_conduit (void );extern int psci_cpu_on (unsigned long cpuid,unsigned long entry_point);extern void psci_system_reset (void );extern int cpu_psci_cpu_boot (unsigned int cpu);lib/arm/psci.c +27
-8@@ -6,22 +6,21 @@* * This work is licensed under the terms of the GNU LGPL, version 2. */ +#include <devicetree.h> #include <asm/psci.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/smp.h> -__attribute__((noinline)) -int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2) +static long psci_invoke_none (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2) { - asmvolatile ( -"hvc #0" - :"+r" (function_id) - :"r" (arg0),"r" (arg1),"r" (arg2)); -return function_id; +printf ("No PSCI method configured! Can't invoke...\n" ); +return PSCI_RET_NOT_PRESENT ; } +psci_invoke_fn psci_invoke = psci_invoke_none; +int psci_cpu_on (unsigned long cpuid,unsigned long entry_point) {#ifdef __arm__@@ -56,3 +55,23 @@ void psci_system_off(void)int err =psci_invoke (PSCI_0_2_FN_SYSTEM_OFF ,0 ,0 ,0 );printf ("CPU%d unable to do system off (error = %d)\n" ,smp_processor_id (), err); } + +void psci_set_conduit (void ) +{ +const void *fdt =dt_fdt (); +const struct fdt_property *method; +int node, len; + + node =fdt_node_offset_by_compatible (fdt,-1 ,"arm,psci-0.2" ); +assert_msg (node >=0 ,"PSCI v0.2 compatibility required" ); + + method =fdt_get_property (fdt, node,"method" , &len); +assert (method !=NULL && len ==4 ); + +if (strcmp (method->data,"hvc" ) ==0 ) + psci_invoke = psci_invoke_hvc; +else if (strcmp (method->data,"smc" ) ==0 ) + psci_invoke = psci_invoke_smc; +else +assert_msg (false,"Unknown PSCI conduit: %s" , method->data); +}lib/arm/setup.c +2
-0@@ -25,6 +25,7 @@#include <asm/processor.h> #include <asm/smp.h> #include <asm/timer.h> +#include <asm/psci.h> #include "io.h" @@ -266,6 +267,7 @@ void setup(const void *fdt, phys_addr_t freemem_start)mem_regions_add_assumed ();mem_init (PAGE_ALIGN ((unsigned long )freemem)); +psci_set_conduit ();cpu_init ();/* cpu_init must be called before thread_info_init */
Re: [PATCH kvm-unit-tests v3 8/8] arm/arm64: psci: Don't assume method is hvc
Quoted 12 lines · Alexandru Elisei
Hi Drew,
Quoted 5 lines · Andrew Jones
The method can be smc in addition to hvc, and it will be when running on bare metal. Additionally, we move the invocations to assembly so we don't have to rely on compiler assumptions. We also fix the prototype of
psci_invoke. It should return long, not int, andfunction_idshould be an unsigned int, not an unsigned long.Sorry to harp on this again, but to be honest, it's still not clear to me why the psci_invoke_{hvc,smc} functions return a long int.
Quoted 7 lines
If we only expect the PSCI functions to return error codes, then the PSCI spec says these are 32-bit signed integers. If we want to support PSCI functions returning other values, like PSCI_STAT_{RESIDENCY,COUNT}, then the invoke functions should return an unsigned value.
The only case we're supporting is the error return for the SMC calling convention (which says that error codes are 32/64bit signed integers).
psci_invoke_{hvc,smc} should implement the SMC calling convention, since they're just wrapping the smc/hvc call. PSCI calls that build on that, e.g. psci_cpu_on, can define their own return type and then translate the signed long returned by SMC into, e.g. 32-bit signed integers. Indeed that's what psci_cpu_on does.
I would write something like that in the commit message or rename psci_invoke to smc_invoke.
Thanks,
drew
Quoted 242 lines
Since the commit
specifically mentions this change, I think some explanation why this width was chosen would be appropriate. Unless it's painfully obvious and I'm just not seeing it, which is a possibility.Other than that, the patch looks good. I'll some tests to make sure everything is in order.
Thanks,
Alex
Quoted 229 lines
Signed-off-by Andrew Jones <[email protected]>--- arm/cstart.S | 22 ++++++++++++++++++++++ arm/cstart64.S | 22 ++++++++++++++++++++++ arm/selftest.c | 34 +++++++--------------------------- lib/arm/asm/psci.h | 10 ++++++++-- lib/arm/psci.c | 35 +++++++++++++++++++++++++++-------- lib/arm/setup.c | 2 ++ 6 files changed, 88 insertions(+), 37 deletions(-)arm/cstart.S +22
-0@@ -95,6 +95,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * r0 -- function_id + * r1 -- arg0 + * r2 -- arg1 + * r3 -- arg2 + * + * Outputs: + * r0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + mov pc, lr + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + mov pc, lr + enable_vfp: /* Enable full access to CP10 and CP11: */ mov r0, #(3 << 22 | 3 << 20)arm/cstart64.S +22
-0@@ -109,6 +109,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * w0 -- function_id + * x1 -- arg0 + * x2 -- arg1 + * x3 -- arg2 + * + * Outputs: + * x0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + ret + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + ret + get_mmu_off: adrp x0, auxinfo ldr x0, [x0, :lo12:auxinfo + 8]arm/selftest.c +7
-27@@ -400,33 +400,13 @@ static void check_vectors(void *arg __unused)exit (report_summary ()); } -static bool psci_check (void ) +static void psci_print (void ) { -const struct fdt_property *method; -int node, len, ver; - - node =fdt_node_offset_by_compatible (dt_fdt (),-1 ,"arm,psci-0.2" ); -if (node <0 ) { -printf ("PSCI v0.2 compatibility required\n" ); -return false; - } - - method =fdt_get_property (dt_fdt (), node,"method" , &len); -if (method ==NULL ) { -printf ("bad psci device tree node\n" ); -return false; - } - -if (len <4 ||strcmp (method->data,"hvc" ) !=0 ) { -printf ("psci method must be hvc\n" ); -return false; - } - - ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); -printf ("PSCI version %d.%d\n" ,PSCI_VERSION_MAJOR (ver), -PSCI_VERSION_MINOR (ver)); - -return true; +int ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); +report_info ("PSCI version: %d.%d" ,PSCI_VERSION_MAJOR (ver), +PSCI_VERSION_MINOR (ver)); +report_info ("PSCI method: %s" , psci_invoke == psci_invoke_hvc ? +"hvc" :"smc" ); } static void cpu_report(void *data __unused)@@ -465,7 +445,7 @@ int main(int argc, char **argv) }else if (strcmp (argv[1 ],"smp" ) ==0 ) { -report (psci_check (),"PSCI version" ); +psci_print ();on_cpus (cpu_report,NULL );while (!cpumask_full (&ready))cpu_relax ();lib/arm/asm/psci.h +8
-2@@ -3,8 +3,14 @@#include <libcflat.h> #include <linux/psci.h> -extern int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2); +typedef long (*psci_invoke_fn )(unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern psci_invoke_fn psci_invoke; +extern long psci_invoke_hvc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern long psci_invoke_smc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern void psci_set_conduit (void );extern int psci_cpu_on (unsigned long cpuid,unsigned long entry_point);extern void psci_system_reset (void );extern int cpu_psci_cpu_boot (unsigned int cpu);lib/arm/psci.c +27
-8@@ -6,22 +6,21 @@* * This work is licensed under the terms of the GNU LGPL, version 2. */ +#include <devicetree.h> #include <asm/psci.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/smp.h> -__attribute__((noinline)) -int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2) +static long psci_invoke_none (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2) { - asmvolatile ( -"hvc #0" - :"+r" (function_id) - :"r" (arg0),"r" (arg1),"r" (arg2)); -return function_id; +printf ("No PSCI method configured! Can't invoke...\n" ); +return PSCI_RET_NOT_PRESENT ; } +psci_invoke_fn psci_invoke = psci_invoke_none; +int psci_cpu_on (unsigned long cpuid,unsigned long entry_point) {#ifdef __arm__@@ -56,3 +55,23 @@ void psci_system_off(void)int err =psci_invoke (PSCI_0_2_FN_SYSTEM_OFF ,0 ,0 ,0 );printf ("CPU%d unable to do system off (error = %d)\n" ,smp_processor_id (), err); } + +void psci_set_conduit (void ) +{ +const void *fdt =dt_fdt (); +const struct fdt_property *method; +int node, len; + + node =fdt_node_offset_by_compatible (fdt,-1 ,"arm,psci-0.2" ); +assert_msg (node >=0 ,"PSCI v0.2 compatibility required" ); + + method =fdt_get_property (fdt, node,"method" , &len); +assert (method !=NULL && len ==4 ); + +if (strcmp (method->data,"hvc" ) ==0 ) + psci_invoke = psci_invoke_hvc; +else if (strcmp (method->data,"smc" ) ==0 ) + psci_invoke = psci_invoke_smc; +else +assert_msg (false,"Unknown PSCI conduit: %s" , method->data); +}lib/arm/setup.c +2
-0@@ -25,6 +25,7 @@#include <asm/processor.h> #include <asm/smp.h> #include <asm/timer.h> +#include <asm/psci.h> #include "io.h" @@ -266,6 +267,7 @@ void setup(const void *fdt, phys_addr_t freemem_start)mem_regions_add_assumed ();mem_init (PAGE_ALIGN ((unsigned long )freemem)); +psci_set_conduit ();cpu_init ();/* cpu_init must be called before thread_info_init */
Re: [PATCH kvm-unit-tests v3 8/8] arm/arm64: psci: Don't assume method is hvc
Hi Drew,
Quoted 19 lines · Andrew Jones
Quoted 11 lines · Alexandru Elisei
Hi Drew,
Quoted 5 lines · Andrew Jones
The method can be smc in addition to hvc, and it will be when running on bare metal. Additionally, we move the invocations to assembly so we don't have to rely on compiler assumptions. We also fix the prototype of
psci_invoke. It should return long, not int, andfunction_idshould be an unsigned int, not an unsigned long.Sorry to harp on this again, but to be honest, it's still not clear to me why the psci_invoke_{hvc,smc} functions return a long int.
Quoted 7 lines
If we only expect the PSCI functions to return error codes, then the PSCI spec says these are 32-bit signed integers. If we want to support PSCI functions returning other values, like PSCI_STAT_{RESIDENCY,COUNT}, then the invoke functions should return an unsigned value.
The only case we're supporting is the error return for the SMC calling convention (which says that error codes are 32/64bit signed integers).
Quoted 8 lines
psci_invoke_{hvc,smc} should implement the SMC calling convention, since they're just wrapping the smc/hvc call. PSCI calls that build on that, e.g.
psci_cpu_on, can define their own return type and then translate the signed long returned by SMC into, e.g. 32-bit signed integers. Indeed that's whatpsci_cpu_ondoes.I would write something like that in the commit message or rename
psci_invoketosmc_invoke.
I agree that psci_invoke_* use the SMC calling convention, but we're not implementing *all* the features of the SMC calling convention, because SMCCC can return more than one result in registers r0-r3. In my opinion, I think the easiest solution and the most consistent with both specifications would be to keep the current names and change the return value either to an int, and put a comment saying that we only support PSCI functions that return an error, either to a long unsigned int, meaning that we support *all* PSCI functions as defined in ARM DEN 0022D.
What do you think? Does that make sense?
Thanks,
Alex
Quoted 245 lines
Thanks,
drewQuoted 240 lines
Since the commit
specifically mentions this change, I think some explanation why this width was chosen would be appropriate. Unless it's painfully obvious and I'm just not seeing it, which is a possibility.Other than that, the patch looks good. I'll some tests to make sure everything is in order.
Thanks,
Alex
Quoted 228 lines
Signed-off-by Andrew Jones <[email protected]>--- arm/cstart.S | 22 ++++++++++++++++++++++ arm/cstart64.S | 22 ++++++++++++++++++++++ arm/selftest.c | 34 +++++++--------------------------- lib/arm/asm/psci.h | 10 ++++++++-- lib/arm/psci.c | 35 +++++++++++++++++++++++++++-------- lib/arm/setup.c | 2 ++ 6 files changed, 88 insertions(+), 37 deletions(-)arm/cstart.S +22
-0@@ -95,6 +95,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * r0 -- function_id + * r1 -- arg0 + * r2 -- arg1 + * r3 -- arg2 + * + * Outputs: + * r0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + mov pc, lr + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + mov pc, lr + enable_vfp: /* Enable full access to CP10 and CP11: */ mov r0, #(3 << 22 | 3 << 20)arm/cstart64.S +22
-0@@ -109,6 +109,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * w0 -- function_id + * x1 -- arg0 + * x2 -- arg1 + * x3 -- arg2 + * + * Outputs: + * x0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + ret + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + ret + get_mmu_off: adrp x0, auxinfo ldr x0, [x0, :lo12:auxinfo + 8]arm/selftest.c +7
-27@@ -400,33 +400,13 @@ static void check_vectors(void *arg __unused)exit (report_summary ()); } -static bool psci_check (void ) +static void psci_print (void ) { -const struct fdt_property *method; -int node, len, ver; - - node =fdt_node_offset_by_compatible (dt_fdt (),-1 ,"arm,psci-0.2" ); -if (node <0 ) { -printf ("PSCI v0.2 compatibility required\n" ); -return false; - } - - method =fdt_get_property (dt_fdt (), node,"method" , &len); -if (method ==NULL ) { -printf ("bad psci device tree node\n" ); -return false; - } - -if (len <4 ||strcmp (method->data,"hvc" ) !=0 ) { -printf ("psci method must be hvc\n" ); -return false; - } - - ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); -printf ("PSCI version %d.%d\n" ,PSCI_VERSION_MAJOR (ver), -PSCI_VERSION_MINOR (ver)); - -return true; +int ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); +report_info ("PSCI version: %d.%d" ,PSCI_VERSION_MAJOR (ver), +PSCI_VERSION_MINOR (ver)); +report_info ("PSCI method: %s" , psci_invoke == psci_invoke_hvc ? +"hvc" :"smc" ); } static void cpu_report(void *data __unused)@@ -465,7 +445,7 @@ int main(int argc, char **argv) }else if (strcmp (argv[1 ],"smp" ) ==0 ) { -report (psci_check (),"PSCI version" ); +psci_print ();on_cpus (cpu_report,NULL );while (!cpumask_full (&ready))cpu_relax ();lib/arm/asm/psci.h +8
-2@@ -3,8 +3,14 @@#include <libcflat.h> #include <linux/psci.h> -extern int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2); +typedef long (*psci_invoke_fn )(unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern psci_invoke_fn psci_invoke; +extern long psci_invoke_hvc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern long psci_invoke_smc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern void psci_set_conduit (void );extern int psci_cpu_on (unsigned long cpuid,unsigned long entry_point);extern void psci_system_reset (void );extern int cpu_psci_cpu_boot (unsigned int cpu);lib/arm/psci.c +27
-8@@ -6,22 +6,21 @@* * This work is licensed under the terms of the GNU LGPL, version 2. */ +#include <devicetree.h> #include <asm/psci.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/smp.h> -__attribute__((noinline)) -int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2) +static long psci_invoke_none (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2) { - asmvolatile ( -"hvc #0" - :"+r" (function_id) - :"r" (arg0),"r" (arg1),"r" (arg2)); -return function_id; +printf ("No PSCI method configured! Can't invoke...\n" ); +return PSCI_RET_NOT_PRESENT ; } +psci_invoke_fn psci_invoke = psci_invoke_none; +int psci_cpu_on (unsigned long cpuid,unsigned long entry_point) {#ifdef __arm__@@ -56,3 +55,23 @@ void psci_system_off(void)int err =psci_invoke (PSCI_0_2_FN_SYSTEM_OFF ,0 ,0 ,0 );printf ("CPU%d unable to do system off (error = %d)\n" ,smp_processor_id (), err); } + +void psci_set_conduit (void ) +{ +const void *fdt =dt_fdt (); +const struct fdt_property *method; +int node, len; + + node =fdt_node_offset_by_compatible (fdt,-1 ,"arm,psci-0.2" ); +assert_msg (node >=0 ,"PSCI v0.2 compatibility required" ); + + method =fdt_get_property (fdt, node,"method" , &len); +assert (method !=NULL && len ==4 ); + +if (strcmp (method->data,"hvc" ) ==0 ) + psci_invoke = psci_invoke_hvc; +else if (strcmp (method->data,"smc" ) ==0 ) + psci_invoke = psci_invoke_smc; +else +assert_msg (false,"Unknown PSCI conduit: %s" , method->data); +}lib/arm/setup.c +2
-0@@ -25,6 +25,7 @@#include <asm/processor.h> #include <asm/smp.h> #include <asm/timer.h> +#include <asm/psci.h> #include "io.h" @@ -266,6 +267,7 @@ void setup(const void *fdt, phys_addr_t freemem_start)mem_regions_add_assumed ();mem_init (PAGE_ALIGN ((unsigned long )freemem)); +psci_set_conduit ();cpu_init ();/* cpu_init must be called before thread_info_init */
Re: [PATCH kvm-unit-tests v3 8/8] arm/arm64: psci: Don't assume method is hvc
Quoted 40 lines · Alexandru Elisei
Hi Drew,
Quoted 19 lines · Andrew Jones
Quoted 11 lines · Alexandru Elisei
Hi Drew,
Quoted 5 lines · Andrew Jones
The method can be smc in addition to hvc, and it will be when running on bare metal. Additionally, we move the invocations to assembly so we don't have to rely on compiler assumptions. We also fix the prototype of
psci_invoke. It should return long, not int, andfunction_idshould be an unsigned int, not an unsigned long.Sorry to harp on this again, but to be honest, it's still not clear to me why the psci_invoke_{hvc,smc} functions return a long int.
Quoted 7 lines
If we only expect the PSCI functions to return error codes, then the PSCI spec says these are 32-bit signed integers. If we want to support PSCI functions returning other values, like PSCI_STAT_{RESIDENCY,COUNT}, then the invoke functions should return an unsigned value.
The only case we're supporting is the error return for the SMC calling convention (which says that error codes are 32/64bit signed integers).
Quoted 8 lines
psci_invoke_{hvc,smc} should implement the SMC calling convention, since they're just wrapping the smc/hvc call. PSCI calls that build on that, e.g.
psci_cpu_on, can define their own return type and then translate the signed long returned by SMC into, e.g. 32-bit signed integers. Indeed that's whatpsci_cpu_ondoes.I would write something like that in the commit message or rename
psci_invoketosmc_invoke.I agree that psci_invoke_* use the SMC calling convention, but we're not implementing *all* the features of the SMC calling convention, because SMCCC can return more than one result in registers r0-r3. In my opinion, I think the easiest solution and the most consistent with both specifications would be to keep the current names and change the return value either to an int, and put a comment saying that we only support PSCI functions that return an error, either to a long unsigned int, meaning that we support *all* PSCI functions as defined in ARM DEN 0022D.
Quoted 2 lines
What do you think? Does that make sense?
OK, I'll change it back to an int return for psci_invoke and remove the sentences in the commit message about it. I won't write any new comments though, because I'd actually rather reduce the common PSCI code, than to try and ensure we support it completely. We should do as little PSCI in lib/arm* as possible. The psci unit test (arm/psci.c) is the one that should worry the most about the specifications, and it should actually define its own interfaces in order to inspect all bits, including the ones that aren't supposed to be used, when it does its tests.
Thanks,
drew
PATCH v4 1/1 arm/arm64: psci: Don't assume method is hvc
In reply to Andrew JonesThe method can be smc in addition to hvc, and it will be when running on bare metal. Additionally, we move the invocations to assembly so we don't have to rely on compiler assumptions. We also fix the prototype of psci_invoke. function_id should be an unsigned int, not an unsigned long.
--- arm/cstart.S | 22 ++++++++++++++++++++++ arm/cstart64.S | 22 ++++++++++++++++++++++ arm/selftest.c | 34 +++++++--------------------------- lib/arm/asm/psci.h | 10 ++++++++-- lib/arm/psci.c | 35 +++++++++++++++++++++++++++-------- lib/arm/setup.c | 2 ++ 6 files changed, 88 insertions(+), 37 deletions(-)
arm/cstart.S +22 -0
@@ -95,6 +95,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * r0 -- function_id + * r1 -- arg0 + * r2 -- arg1 + * r3 -- arg2 + * + * Outputs: + * r0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + mov pc, lr + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + mov pc, lr + enable_vfp: /* Enable full access to CP10 and CP11: */ mov r0, #(3 << 22 | 3 << 20)
arm/cstart64.S +22 -0
@@ -109,6 +109,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * w0 -- function_id + * x1 -- arg0 + * x2 -- arg1 + * x3 -- arg2 + * + * Outputs: + * x0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + ret + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + ret + get_mmu_off: adrp x0, auxinfo ldr x0, [x0, :lo12:auxinfo + 8]
arm/selftest.c +7 -27
@@ -400,33 +400,13 @@ static void check_vectors(void *arg __unused)exit (report_summary ()); } -static bool psci_check (void ) +static void psci_print (void ) { -const struct fdt_property *method; -int node, len, ver; - - node =fdt_node_offset_by_compatible (dt_fdt (),-1 ,"arm,psci-0.2" ); -if (node <0 ) { -printf ("PSCI v0.2 compatibility required\n" ); -return false; - } - - method =fdt_get_property (dt_fdt (), node,"method" , &len); -if (method ==NULL ) { -printf ("bad psci device tree node\n" ); -return false; - } - -if (len <4 ||strcmp (method->data,"hvc" ) !=0 ) { -printf ("psci method must be hvc\n" ); -return false; - } - - ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); -printf ("PSCI version %d.%d\n" ,PSCI_VERSION_MAJOR (ver), -PSCI_VERSION_MINOR (ver)); - -return true; +int ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); +report_info ("PSCI version: %d.%d" ,PSCI_VERSION_MAJOR (ver), +PSCI_VERSION_MINOR (ver)); +report_info ("PSCI method: %s" , psci_invoke == psci_invoke_hvc ? +"hvc" :"smc" ); } static void cpu_report(void *data __unused)
@@ -465,7 +445,7 @@ int main(int argc, char **argv) }else if (strcmp (argv[1 ],"smp" ) ==0 ) { -report (psci_check (),"PSCI version" ); +psci_print ();on_cpus (cpu_report,NULL );while (!cpumask_full (&ready))cpu_relax ();
lib/arm/asm/psci.h +8 -2
@@ -3,8 +3,14 @@#include <libcflat.h> #include <linux/psci.h> -extern int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2); +typedef int (*psci_invoke_fn )(unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern psci_invoke_fn psci_invoke; +extern int psci_invoke_hvc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern int psci_invoke_smc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern void psci_set_conduit (void );extern int psci_cpu_on (unsigned long cpuid,unsigned long entry_point);extern void psci_system_reset (void );extern int cpu_psci_cpu_boot (unsigned int cpu);
lib/arm/psci.c +27 -8
@@ -6,22 +6,21 @@* * This work is licensed under the terms of the GNU LGPL, version 2. */ +#include <devicetree.h> #include <asm/psci.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/smp.h> -__attribute__((noinline)) -int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2) +static int psci_invoke_none (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2) { - asmvolatile ( -"hvc #0" - :"+r" (function_id) - :"r" (arg0),"r" (arg1),"r" (arg2)); -return function_id; +printf ("No PSCI method configured! Can't invoke...\n" ); +return PSCI_RET_NOT_PRESENT ; } +psci_invoke_fn psci_invoke = psci_invoke_none; +int psci_cpu_on (unsigned long cpuid,unsigned long entry_point) {#ifdef __arm__
@@ -56,3 +55,23 @@ void psci_system_off(void)int err =psci_invoke (PSCI_0_2_FN_SYSTEM_OFF ,0 ,0 ,0 );printf ("CPU%d unable to do system off (error = %d)\n" ,smp_processor_id (), err); } + +void psci_set_conduit (void ) +{ +const void *fdt =dt_fdt (); +const struct fdt_property *method; +int node, len; + + node =fdt_node_offset_by_compatible (fdt,-1 ,"arm,psci-0.2" ); +assert_msg (node >=0 ,"PSCI v0.2 compatibility required" ); + + method =fdt_get_property (fdt, node,"method" , &len); +assert (method !=NULL && len ==4 ); + +if (strcmp (method->data,"hvc" ) ==0 ) + psci_invoke = psci_invoke_hvc; +else if (strcmp (method->data,"smc" ) ==0 ) + psci_invoke = psci_invoke_smc; +else +assert_msg (false,"Unknown PSCI conduit: %s" , method->data); +}
lib/arm/setup.c +2 -0
@@ -25,6 +25,7 @@#include <asm/processor.h> #include <asm/smp.h> #include <asm/timer.h> +#include <asm/psci.h> #include "io.h"
@@ -266,6 +267,7 @@ void setup(const void *fdt, phys_addr_t freemem_start)mem_regions_add_assumed ();mem_init (PAGE_ALIGN ((unsigned long )freemem)); +psci_set_conduit ();cpu_init ();/* cpu_init must be called before thread_info_init */
Signature · 1 line
2.30.2
Re: [PATCH kvm-unit-tests v4] arm/arm64: psci: Don't assume method is hvc
Hi Drew,
Quoted 5 lines · Andrew Jones
The method can be smc in addition to hvc, and it will be when running on bare metal. Additionally, we move the invocations to assembly so we don't have to rely on compiler assumptions. We also fix the prototype of
psci_invoke.function_idshould be an unsigned int, not an unsigned long.
Looks good to me:
Thanks,
Alex
Quoted 229 lines
Signed-off-by Andrew Jones <[email protected]>--- arm/cstart.S | 22 ++++++++++++++++++++++ arm/cstart64.S | 22 ++++++++++++++++++++++ arm/selftest.c | 34 +++++++--------------------------- lib/arm/asm/psci.h | 10 ++++++++-- lib/arm/psci.c | 35 +++++++++++++++++++++++++++-------- lib/arm/setup.c | 2 ++ 6 files changed, 88 insertions(+), 37 deletions(-)arm/cstart.S +22
-0@@ -95,6 +95,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * r0 -- function_id + * r1 -- arg0 + * r2 -- arg1 + * r3 -- arg2 + * + * Outputs: + * r0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + mov pc, lr + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + mov pc, lr + enable_vfp: /* Enable full access to CP10 and CP11: */ mov r0, #(3 << 22 | 3 << 20)arm/cstart64.S +22
-0@@ -109,6 +109,28 @@ start: .text +/* + * psci_invoke_hvc / psci_invoke_smc + * + * Inputs: + * w0 -- function_id + * x1 -- arg0 + * x2 -- arg1 + * x3 -- arg2 + * + * Outputs: + * x0 -- return code + */ +.globl psci_invoke_hvc +psci_invoke_hvc: + hvc #0 + ret + +.globl psci_invoke_smc +psci_invoke_smc: + smc #0 + ret + get_mmu_off: adrp x0, auxinfo ldr x0, [x0, :lo12:auxinfo + 8]arm/selftest.c +7
-27@@ -400,33 +400,13 @@ static void check_vectors(void *arg __unused)exit (report_summary ()); } -static bool psci_check (void ) +static void psci_print (void ) { -const struct fdt_property *method; -int node, len, ver; - - node =fdt_node_offset_by_compatible (dt_fdt (),-1 ,"arm,psci-0.2" ); -if (node <0 ) { -printf ("PSCI v0.2 compatibility required\n" ); -return false; - } - - method =fdt_get_property (dt_fdt (), node,"method" , &len); -if (method ==NULL ) { -printf ("bad psci device tree node\n" ); -return false; - } - -if (len <4 ||strcmp (method->data,"hvc" ) !=0 ) { -printf ("psci method must be hvc\n" ); -return false; - } - - ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); -printf ("PSCI version %d.%d\n" ,PSCI_VERSION_MAJOR (ver), -PSCI_VERSION_MINOR (ver)); - -return true; +int ver =psci_invoke (PSCI_0_2_FN_PSCI_VERSION ,0 ,0 ,0 ); +report_info ("PSCI version: %d.%d" ,PSCI_VERSION_MAJOR (ver), +PSCI_VERSION_MINOR (ver)); +report_info ("PSCI method: %s" , psci_invoke == psci_invoke_hvc ? +"hvc" :"smc" ); } static void cpu_report(void *data __unused)@@ -465,7 +445,7 @@ int main(int argc, char **argv) }else if (strcmp (argv[1 ],"smp" ) ==0 ) { -report (psci_check (),"PSCI version" ); +psci_print ();on_cpus (cpu_report,NULL );while (!cpumask_full (&ready))cpu_relax ();lib/arm/asm/psci.h +8
-2@@ -3,8 +3,14 @@#include <libcflat.h> #include <linux/psci.h> -extern int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2); +typedef int (*psci_invoke_fn )(unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern psci_invoke_fn psci_invoke; +extern int psci_invoke_hvc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern int psci_invoke_smc (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2); +extern void psci_set_conduit (void );extern int psci_cpu_on (unsigned long cpuid,unsigned long entry_point);extern void psci_system_reset (void );extern int cpu_psci_cpu_boot (unsigned int cpu);lib/arm/psci.c +27
-8@@ -6,22 +6,21 @@* * This work is licensed under the terms of the GNU LGPL, version 2. */ +#include <devicetree.h> #include <asm/psci.h> #include <asm/setup.h> #include <asm/page.h> #include <asm/smp.h> -__attribute__((noinline)) -int psci_invoke (unsigned long function_id,unsigned long arg0, -unsigned long arg1,unsigned long arg2) +static int psci_invoke_none (unsigned int function_id,unsigned long arg0, +unsigned long arg1,unsigned long arg2) { - asmvolatile ( -"hvc #0" - :"+r" (function_id) - :"r" (arg0),"r" (arg1),"r" (arg2)); -return function_id; +printf ("No PSCI method configured! Can't invoke...\n" ); +return PSCI_RET_NOT_PRESENT ; } +psci_invoke_fn psci_invoke = psci_invoke_none; +int psci_cpu_on (unsigned long cpuid,unsigned long entry_point) {#ifdef __arm__@@ -56,3 +55,23 @@ void psci_system_off(void)int err =psci_invoke (PSCI_0_2_FN_SYSTEM_OFF ,0 ,0 ,0 );printf ("CPU%d unable to do system off (error = %d)\n" ,smp_processor_id (), err); } + +void psci_set_conduit (void ) +{ +const void *fdt =dt_fdt (); +const struct fdt_property *method; +int node, len; + + node =fdt_node_offset_by_compatible (fdt,-1 ,"arm,psci-0.2" ); +assert_msg (node >=0 ,"PSCI v0.2 compatibility required" ); + + method =fdt_get_property (fdt, node,"method" , &len); +assert (method !=NULL && len ==4 ); + +if (strcmp (method->data,"hvc" ) ==0 ) + psci_invoke = psci_invoke_hvc; +else if (strcmp (method->data,"smc" ) ==0 ) + psci_invoke = psci_invoke_smc; +else +assert_msg (false,"Unknown PSCI conduit: %s" , method->data); +}lib/arm/setup.c +2
-0@@ -25,6 +25,7 @@#include <asm/processor.h> #include <asm/smp.h> #include <asm/timer.h> +#include <asm/psci.h> #include "io.h" @@ -266,6 +267,7 @@ void setup(const void *fdt, phys_addr_t freemem_start)mem_regions_add_assumed ();mem_init (PAGE_ALIGN ((unsigned long )freemem)); +psci_set_conduit ();cpu_init ();/* cpu_init must be called before thread_info_init */