Skip to contentSkip to conversation

usb: musb: Remove unused function argument

PATCH New Saurav Girepunje 1 participant 1 message May 1, 2021

Subsystems (2)
USB MUSB multipoint high speed dual-role controller
lore
Share & tools
lore

Saurav Girepunje

author
#0 lore raw

PATCH 1/1 usb: musb: Remove unused function argument

Remove unused function argument struct dma_controller *dma, struct urb *urb and u32 offset from musb_tx_dma_set_mode_mentor

Signed-off-by Saurav Girepunje <[email protected]>
---
 drivers/usb/musb/musb_host.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/usb/musb/musb_host.c +4 -5
index 8b7d22a0c0fb..14d9b366e605 100644
@@ -563,10 +563,9 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
 	ep->rx_reinit = 0;
 }
 
-static void musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
-		struct musb_hw_ep *hw_ep, struct musb_qh *qh,
-		struct urb *urb, u32 offset,
-		u32 *length, u8 *mode)
+static void musb_tx_dma_set_mode_mentor(struct musb_hw_ep *hw_ep,
+					struct musb_qh *qh,
+					u32 *length, u8 *mode)
 {
 	struct dma_channel	*channel = hw_ep->tx_channel;
 	void __iomem		*epio = hw_ep->regs;

@@ -630,7 +629,7 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
 	u8			mode;
 
 	if (musb_dma_inventra(hw_ep->musb) || musb_dma_ux500(hw_ep->musb))
-		musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, offset,
+		musb_tx_dma_set_mode_mentor(hw_ep, qh,
 					    &length, &mode);
 	else if (is_cppi_enabled(hw_ep->musb) || tusb_dma_omap(hw_ep->musb))
 		musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, offset,

--
2.25.1