testimage: hangs if missing debug-tweaks
PATCH 1/1 testimage: hangs if missing debug-tweaks
The only clue is this:
WARNING: core-image-minimal-1.0-r0 do_testimage: Couldn't login into serial console as root using blank password
WARNING: core-image-minimal-1.0-r0 do_testimage: The output:
root
Login incorrect
qemux86 login:
Login timed out after 60 seconds
Poky (Yocto Project Reference Distro) 3.3+snapshot-65e75bd5d40c10509a3416026e551b7b7111c42a qemux86 /dev/ttyS1
qemux86 login: <<< run_serial(): command timed out after 120 seconds without output >>>
Hangs here....
We should issue a error and quit.
--- meta/classes/testimage.bbclass | 4 ++++ 1 file changed, 4 insertions(+)
meta/classes/testimage.bbclass +4 -0
@@ -142,6 +142,10 @@ do_testimage[depends] += "${TESTIMAGEDEPENDS}" do_testimage[lockfiles] += "${TESTIMAGELOCK}" def testimage_sanity(d): + if (bb.utils.contains("IMAGE_FEATURES", [ 'debug-tweaks'], False, True, d)): + bb.fatal('testimage requires a blank root password' + 'Please check if debug-tweaks is IMAGE_FEATURES.') + if (d.getVar('TEST_TARGET') == 'simpleremote' and (not d.getVar('TEST_TARGET_IP') or not d.getVar('TEST_SERVER_IP'))):
Signature · 1 line
2.25.1
Quoted 9 lines · Armin Kuster
The only clue is this:
WARNING: core-image-minimal-1.0-r0
do_testimage: Couldn't login into serial console as root using blank password
WARNING: core-image-minimal-1.0-r0do_testimage: The output:
root
Login incorrect
qemux86 login:
Login timed out after 60 seconds
Quoted 7 lines
Poky (Yocto Project Reference Distro) 3.3+snapshot-65e75bd5d40c10509a3416026e551b7b7111c42a qemux86
/dev/ttyS1qemux86 login: <<<
run_serial(): command timed out after 120 seconds without output >>>Hangs here....
We should issue a error and quit.
What happens if I set IMAGE_FEATURES = "empty-root-password allow-empty-password"?
Should we disable the serial monitoring if these or debug-tweaks isn't enabled? I'm surprised it causes the image to hang, it should just trigger the warning but continue to work...
Cheers,
Richard
Quoted 25 lines
Signed-off-by Armin Kuster <[email protected]>---
meta/classes/testimage.bbclass | 4 ++++1 file changed, 4 insertions(+)meta/classes/testimage.bbclass +0
-0@@ -142,6 +142,10 @@ do_testimage[depends] += "${TESTIMAGEDEPENDS}"do_testimage[lockfiles] += "${TESTIMAGELOCK}"
def
testimage_sanity(d):meta/classes/testimage.bbclass +4
-0+ if (bb.utils.contains("IMAGE_FEATURES", [ 'debug-tweaks'], False, True, d)): + bb.fatal('testimage requires a blank root password' + 'Please check if debug-tweaks is IMAGE_FEATURES.') +if (
d.getVar('TEST_TARGET')== 'simpleremote' and (notd.getVar('TEST_TARGET_IP')or notd.getVar('TEST_SERVER_IP'))):
Quoted 10 lines · Richard Purdie
Quoted 9 lines · Armin Kuster
The only clue is this:
WARNING: core-image-minimal-1.0-r0
do_testimage: Couldn't login into serial console as root using blank password
WARNING: core-image-minimal-1.0-r0do_testimage: The output:
root
Login incorrect
qemux86 login:
Login timed out after 60 seconds
Quoted 8 lines
Quoted 7 lines
Poky (Yocto Project Reference Distro) 3.3+snapshot-65e75bd5d40c10509a3416026e551b7b7111c42a qemux86
/dev/ttyS1qemux86 login: <<<
run_serial(): command timed out after 120 seconds without output >>>Hangs here....
We should issue a error and quit.
What happens if I set
IMAGE_FEATURES= "empty-root-password allow-empty-password"?
Do you expect folks to use undocumented internal only settings? (Just added them)
Quoted 3 lines
Should we disable the serial monitoring if these or debug-tweaks isn't enabled?
Will look into it.
Quoted 2 lines
I'm surprised it causes the image to hang, it should just trigger the warning but continue to work...
WARNING: core-image-minimal-1.0-r0 do_testimage: Couldn't login into serial console as root using blank password
WARNING: core-image-minimal-1.0-r0 do_testimage: The output:
root
Login incorrect
qemux86 login:
Login timed out after 60 seconds
Poky (Yocto Project Reference Distro) 3.3+snapshot-65e75bd5d40c10509a3416026e551b7b7111c42a qemux86 /dev/ttyS1
qemux86 login: <<< run_serial(): command timed out after 120 seconds without output >>>
Currently 1 running tasks (732 of 732) 99% |#################################################### |
0: core-image-minimal-1.0-r0 do_testimage - 10m15s (pid 879458) <<<<--- how long should one wait???
TEST_SUITES = "ssh scp ping"
not testing much.
- Armin
Quoted 31 lines
Cheers,
Richard
Quoted 25 lines
Signed-off-by Armin Kuster <[email protected]>---
meta/classes/testimage.bbclass | 4 ++++1 file changed, 4 insertions(+)meta/classes/testimage.bbclass +0
-0@@ -142,6 +142,10 @@ do_testimage[depends] += "${TESTIMAGEDEPENDS}"do_testimage[lockfiles] += "${TESTIMAGELOCK}"
def
testimage_sanity(d):meta/classes/testimage.bbclass +4
-0+ if (bb.utils.contains("IMAGE_FEATURES", [ 'debug-tweaks'], False, True, d)): + bb.fatal('testimage requires a blank root password' + 'Please check if debug-tweaks is IMAGE_FEATURES.') +if (
d.getVar('TEST_TARGET')== 'simpleremote' and (notd.getVar('TEST_TARGET_IP')or notd.getVar('TEST_SERVER_IP'))):
Quoted 14 lines · On Sun, 2021-05-02 at 23:24 -0700, akuster808 wrote:
Quoted 12 lines · Richard Purdie
Quoted 11 lines · Armin Kuster
The only clue is this:
WARNING: core-image-minimal-1.0-r0
do_testimage: Couldn't login into serial console as root using blank password
WARNING: core-image-minimal-1.0-r0do_testimage: The output:
root
Login incorrect
qemux86 login:
Login timed out after 60 secondsPoky (Yocto Project Reference Distro) 3.3+snapshot-65e75bd5d40c10509a3416026e551b7b7111c42a qemux86
/dev/ttyS1
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
qemux86 login: <<<
run_serial(): command timed out after 120 seconds without output >>>Hangs here....
We should issue a error and quit.
What happens if I set
IMAGE_FEATURES= "empty-root-password allow-empty-password"?Do you expect folks to use undocumented internal only settings? (Just added them)
They may be undocumented but we should fix that. We're meant to be replacing debug-tweaks with more explicit options.
Quoted 3 lines
Quoted 2 lines
Should we disable the serial monitoring if these or debug-tweaks isn't enabled?
Will look into it.
Thanks, I think that would be the better fix here.
Quoted 17 lines
Quoted 2 lines
I'm surprised it causes the image to hang, it should just trigger the warning but continue to work...
WARNING: core-image-minimal-1.0-r0
do_testimage: Couldn't login into serial console as root using blank password
WARNING: core-image-minimal-1.0-r0do_testimage: The output:
root
Login incorrect
qemux86 login:
Login timed out after 60 secondsPoky (Yocto Project Reference Distro) 3.3+snapshot-65e75bd5d40c10509a3416026e551b7b7111c42a qemux86
/dev/ttyS1qemux86 login: <<<
run_serial(): command timed out after 120 seconds without output >>>
Quoted 8 lines
Currently 1 running tasks (732 of 732) 99%
Quoted 1 line
#################################################### |
0: core-image-minimal-1.0-r0
do_testimage- 10m15s (pid 879458) <<<<--- how long should one wait???
TEST_SUITES= "ssh scp ping"not testing much.
That shouldn't happen and we should look into it, worth a bug if you don't plan to...
Cheers,
Richard