scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe

index eacdcb931bda..fa0d0d15e82c 100644
@@ -2554,7 +2554,6 @@ lpfc_nvmet_unsol_issue_abort(struct lpfc_hba *phba,
 	bf_set(wqe_rcvoxid, &wqe_abts->xmit_sequence.wqe_com, xri);
 
 	/* Word 10 */
-	bf_set(wqe_dbde, &wqe_abts->xmit_sequence.wqe_com, 1);
 	bf_set(wqe_iod, &wqe_abts->xmit_sequence.wqe_com, LPFC_WQE_IOD_WRITE);
 	bf_set(wqe_lenloc, &wqe_abts->xmit_sequence.wqe_com,
 	       LPFC_WQE_LENLOC_WORD12);

index 96411754aa43..40c6d6eacea9 100644
@@ -708,9 +708,14 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		}
 	} else if ((!(ndlp->nlp_type & NLP_FABRIC) &&
 		((ndlp->nlp_type & NLP_FCP_TARGET) ||
-		!(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
+		(ndlp->nlp_type & NLP_NVME_TARGET) ||
+		(vport->fc_flag & FC_PT2PT))) ||
 		(ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
-		/* Only try to re-login if this is NOT a Fabric Node */
+		/* Only try to re-login if this is NOT a Fabric Node
+		 * AND the remote NPORT is a FCP/NVME Target or we
+		 * are in pt2pt mode. NLP_STE_ADISC_ISSUE is a special
+		 * case for LOGO as a response to ADISC behavior.
+		 */
 		mod_timer(&ndlp->nlp_delayfunc,
 			  jiffies + msecs_to_jiffies(1000 * 1));
 		spin_lock_irq(shost->host_lock);

index f80b31b35a0d..a127608a4809 100644
@@ -633,8 +633,9 @@ static void pscsi_complete_cmd(struct se_cmd *cmd, u8 scsi_status,
 			unsigned char *buf;
 
 			buf = transport_kmap_data_sg(cmd);
-			if (!buf)
+			if (!buf) {
 				; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */
+			}
 
 			if (cdb[0] == MODE_SENSE_10) {
 				if (!(buf[3] & 0x80))

index 65e104c7ddfc..c7eea16225e7 100644
@@ -285,8 +285,14 @@ static irqreturn_t ite_cir_isr(int irq, void *data)
 	/* read the interrupt flags */
 	iflags = dev->params.get_irq_causes(dev);
 
+	/* Check for RX overflow */
+	if (iflags & ITE_IRQ_RX_FIFO_OVERRUN) {
+		dev_warn(&dev->rdev->dev, "receive overflow\n");
+		ir_raw_event_reset(dev->rdev);
+	}
+
 	/* check for the receive interrupt */
-	if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
+	if (iflags & ITE_IRQ_RX_FIFO) {
 		/* read the FIFO bytes */
 		rx_bytes =
 			dev->params.get_rx_bytes(dev, rx_buf,

index a7d8cadf172c..3e8466064bb2 100644
@@ -1445,27 +1445,6 @@ static int bq27xxx_battery_read_time(struct bq27xxx_device_info *di, u8 reg)
 	return tval * 60;
 }
 
-/*
- * Read an average power register.
- * Return < 0 if something fails.
- */
-static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di)
-{
-	int tval;
-
-	tval = bq27xxx_read(di, BQ27XXX_REG_AP, false);
-	if (tval < 0) {
-		dev_err(di->dev, "error reading average power register  %02x: %d\n",
-			BQ27XXX_REG_AP, tval);
-		return tval;
-	}
-
-	if (di->opts & BQ27XXX_O_ZERO)
-		return (tval * BQ27XXX_POWER_CONSTANT) / BQ27XXX_RS;
-	else
-		return tval;
-}
-
 /*
  * Returns true if a battery over temperature condition is detected
  */

@@ -1562,8 +1541,6 @@ void bq27xxx_battery_update(struct bq27xxx_device_info *di)
 		}
 		if (di->regs[BQ27XXX_REG_CYCT] != INVALID_REG_ADDR)
 			cache.cycle_count = bq27xxx_battery_read_cyct(di);
-		if (di->regs[BQ27XXX_REG_AP] != INVALID_REG_ADDR)
-			cache.power_avg = bq27xxx_battery_read_pwr_avg(di);
 
 		/* We only have to read charge design full once */
 		if (di->charge_design_full <= 0)

@@ -1625,6 +1602,32 @@ static int bq27xxx_battery_current(struct bq27xxx_device_info *di,
 	return 0;
 }
 
+/*
+ * Get the average power in µW
+ * Return < 0 if something fails.
+ */
+static int bq27xxx_battery_pwr_avg(struct bq27xxx_device_info *di,
+				   union power_supply_propval *val)
+{
+	int power;
+
+	power = bq27xxx_read(di, BQ27XXX_REG_AP, false);
+	if (power < 0) {
+		dev_err(di->dev,
+			"error reading average power register %02x: %d\n",
+			BQ27XXX_REG_AP, power);
+		return power;
+	}
+
+	if (di->opts & BQ27XXX_O_ZERO)
+		val->intval = (power * BQ27XXX_POWER_CONSTANT) / BQ27XXX_RS;
+	else
+		/* Other gauges return a signed value in units of 10mW */
+		val->intval = (int)((s16)power) * 10000;
+
+	return 0;
+}
+
 static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 				  union power_supply_propval *val)
 {

@@ -1790,7 +1793,7 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
 		ret = bq27xxx_simple_value(di->cache.energy, val);
 		break;
 	case POWER_SUPPLY_PROP_POWER_AVG:
-		ret = bq27xxx_simple_value(di->cache.power_avg, val);
+		ret = bq27xxx_battery_pwr_avg(di, val);
 		break;
 	case POWER_SUPPLY_PROP_HEALTH:
 		ret = bq27xxx_simple_value(di->cache.health, val);

index e6187f524f2c..534a8080c6a3 100644
@@ -47,7 +47,6 @@ struct bq27xxx_reg_cache {
 	int capacity;
 	int energy;
 	int flags;
-	int power_avg;
 	int health;
 };
 

index 4937a404fee8..2cfd5db75625 100644
@@ -602,7 +602,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	struct arizona *arizona = info->arizona;
 	int id_gpio = arizona->pdata.hpdet_id_gpio;
 	unsigned int report = EXTCON_JACK_HEADPHONE;
-	int ret, reading;
+	int ret, reading, state;
 	bool mic = false;
 
 	mutex_lock(&info->lock);

@@ -615,12 +615,11 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	}
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
-	if (ret < 0) {
-		dev_err(arizona->dev, "Failed to check cable state: %d\n",
-			ret);
+	state = extcon_get_state(info->edev, EXTCON_MECHANICAL);
+	if (state < 0) {
+		dev_err(arizona->dev, "Failed to check cable state: %d\n", state);
 		goto out;
-	} else if (!ret) {
+	} else if (!state) {
 		dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
 		goto done;
 	}

@@ -673,7 +672,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* If we have a mic then reenable MICDET */
-	if (mic || info->mic)
+	if (state && (mic || info->mic))
 		arizona_start_mic(info);
 
 	if (info->hpdet_active) {

@@ -681,7 +680,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 		info->hpdet_active = false;
 	}
 
-	info->hpdet_done = true;
+	/* Do not set hp_det done when the cable has been unplugged */
+	if (state)
+		info->hpdet_done = true;
 
 out:
 	mutex_unlock(&info->lock);

index f21c245a54f7..c6aeac4db17f 100644
@@ -1024,7 +1024,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 		printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
 			__func__, result);
 		result = -ENOMEM;
-		goto failed;
+		goto fail_pci;
 	}
 
 	/* Establish encoder defaults here */

@@ -1078,7 +1078,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 			  100000, ENCODER_DEF_BITRATE);
 	if (hdl->error) {
 		result = hdl->error;
-		goto failed;
+		goto fail_hdl;
 	}
 
 	port->std = V4L2_STD_NTSC_M;

@@ -1096,7 +1096,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 		printk(KERN_INFO "%s: can't allocate mpeg device\n",
 			dev->name);
 		result = -ENOMEM;
-		goto failed;
+		goto fail_hdl;
 	}
 
 	port->v4l_device->ctrl_handler = hdl;

@@ -1107,10 +1107,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 	if (result < 0) {
 		printk(KERN_INFO "%s: can't register mpeg device\n",
 			dev->name);
-		/* TODO: We're going to leak here if we don't dealloc
-		 The buffers above. The unreg function can't deal wit it.
-		*/
-		goto failed;
+		goto fail_reg;
 	}
 
 	printk(KERN_INFO "%s: registered device video%d [mpeg]\n",

@@ -1132,9 +1129,14 @@ int saa7164_encoder_register(struct saa7164_port *port)
 
 	saa7164_api_set_encoder(port);
 	saa7164_api_get_encoder(port);
+	return 0;
 
-	result = 0;
-failed:
+fail_reg:
+	video_device_release(port->v4l_device);
+	port->v4l_device = NULL;
+fail_hdl:
+	v4l2_ctrl_handler_free(hdl);
+fail_pci:
 	return result;
 }
 

index f1da34a10ce8..ec03d18e057f 100644
@@ -167,7 +167,7 @@ static int
 sq905_read_data(struct gspca_dev *gspca_dev, u8 *data, int size, int need_lock)
 {
 	int ret;
-	int act_len;
+	int act_len = 0;
 
 	gspca_dev->usb_buf[0] = '\0';
 	if (need_lock)

index ae241103b261..6572bc313f96 100644
@@ -17,7 +17,7 @@
 
 /* TODO: Cleanup and shorten the namespace */
 
-/* Some structues are passed directly to/from the firmware and
+/* Some structures are passed directly to/from the firmware and
  * have strict alignment requirements. This is one of them.
  */
 struct tmComResHWDescr {

@@ -38,7 +38,7 @@ struct tmComResHWDescr {
 /* This is DWORD aligned on windows but I can't find the right
  * gcc syntax to match the binary data from the device.
  * I've manually padded with Reserved[3] bytes to match the hardware,
- * but this could break if GCC decies to pack in a different way.
+ * but this could break if GCC decides to pack in a different way.
  */
 struct tmComResInterfaceDescr {
 	u8	bLength;

index b8f7dac7ac3f..6dcabbeccde1 100644
@@ -529,7 +529,7 @@ static int lp8788_set_irqs(struct platform_device *pdev,
 
 		ret = request_threaded_irq(virq, NULL,
 					lp8788_charger_irq_thread,
-					0, name, pchg);
+					IRQF_ONESHOT, name, pchg);
 		if (ret)
 			break;
 	}

index 78561b6884fc..9ef218d76aa9 100644
@@ -1098,7 +1098,7 @@ static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 	ret = request_threaded_irq(gpio_to_irq(pm2->pdata->gpio_irq_number),
 				NULL,
 				pm2xxx_charger_irq[0].isr,
-				pm2->pdata->irq_type,
+				pm2->pdata->irq_type | IRQF_ONESHOT,
 				pm2xxx_charger_irq[0].name, pm2);
 
 	if (ret != 0) {

index 1b4b5e09538e..297bf58f0d4f 100644
@@ -311,7 +311,7 @@ static int tps65090_charger_probe(struct platform_device *pdev)
 
 	if (irq != -ENXIO) {
 		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-			tps65090_charger_isr, 0, "tps65090-charger", cdata);
+			tps65090_charger_isr, IRQF_ONESHOT, "tps65090-charger", cdata);
 		if (ret) {
 			dev_err(cdata->dev,
 				"Unable to register irq %d err %d\n", irq,

index 1f5234098aaf..7295c1b13f93 100644
@@ -250,7 +250,7 @@ static int tps65217_charger_probe(struct platform_device *pdev)
 	for (i = 0; i < NUM_CHARGER_IRQS; i++) {
 		ret = devm_request_threaded_irq(&pdev->dev, irq[i], NULL,
 						tps65217_charger_irq,
-						0, "tps65217-charger",
+						IRQF_ONESHOT, "tps65217-charger",
 						charger);
 		if (ret) {
 			dev_err(charger->dev,

index cd2bfd7bf048..a5a690dd44c2 100644
@@ -1044,12 +1044,6 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 	drm_connector_helper_add(&anx78xx->connector,
 				 &anx78xx_connector_helper_funcs);
 
-	err = drm_connector_register(&anx78xx->connector);
-	if (err) {
-		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
-	}
-
 	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
 	err = drm_mode_connector_attach_encoder(&anx78xx->connector,

@@ -1059,6 +1053,12 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 		return err;
 	}
 
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
 	return 0;
 }
 

index a5a690dd44c2..176ad7a7756e 100644
@@ -1038,7 +1038,7 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (err) {
 		DRM_ERROR("Failed to initialize connector: %d\n", err);
-		return err;
+		goto aux_unregister;
 	}
 
 	drm_connector_helper_add(&anx78xx->connector,

@@ -1050,16 +1050,21 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 						bridge->encoder);
 	if (err) {
 		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	err = drm_connector_register(&anx78xx->connector);
 	if (err) {
 		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	return 0;
+connector_cleanup:
+	drm_connector_cleanup(&anx78xx->connector);
+aux_unregister:
+	drm_dp_aux_unregister(&anx78xx->aux);
+	return err;
 }
 
 static enum drm_mode_status

index 538e5f27d120..fb9361590754 100644
@@ -437,7 +437,7 @@ void amdgpu_irq_gpu_reset_resume_helper(struct amdgpu_device *adev)
 		for (j = 0; j < AMDGPU_MAX_IRQ_SRC_ID; ++j) {
 			struct amdgpu_irq_src *src = adev->irq.client[i].sources[j];
 
-			if (!src)
+			if (!src || !src->funcs || !src->funcs->set)
 				continue;
 			for (k = 0; k < src->num_types; k++)
 				amdgpu_irq_update(adev, src, k);

index 656253285db9..dbfd703d0f46 100644
@@ -1914,6 +1914,8 @@ qla2x00_reset_host_stats(struct Scsi_Host *shost)
 	vha->qla_stats.jiffies_at_last_reset = get_jiffies_64();
 
 	if (IS_FWI2_CAPABLE(ha)) {
+		int rval;
+
 		stats = dma_alloc_coherent(&ha->pdev->dev,
 		    sizeof(*stats), &stats_dma, GFP_KERNEL);
 		if (!stats) {

@@ -1923,7 +1925,11 @@ qla2x00_reset_host_stats(struct Scsi_Host *shost)
 		}
 
 		/* reset firmware statistics */
-		qla24xx_get_isp_stats(base_vha, stats, stats_dma, BIT_0);
+		rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma, BIT_0);
+		if (rval != QLA_SUCCESS)
+			ql_log(ql_log_warn, vha, 0x70de,
+			       "Resetting ISP statistics failed: rval = %d\n",
+			       rval);
 
 		dma_free_coherent(&ha->pdev->dev, sizeof(*stats),
 		    stats, stats_dma);

index c1ca21a88a09..06063a841726 100644
@@ -19,10 +19,11 @@ qla2x00_bsg_job_done(void *ptr, int res)
 	struct bsg_job *bsg_job = sp->u.bsg_job;
 	struct fc_bsg_reply *bsg_reply = bsg_job->reply;
 
+	sp->free(sp);
+
 	bsg_reply->result = res;
 	bsg_job_done(bsg_job, bsg_reply->result,
 		       bsg_reply->reply_payload_rcv_len);
-	sp->free(sp);
 }
 
 void

index ba68454109ba..2cf5579a9ad9 100644
@@ -560,10 +560,11 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 		 * even though it shouldn't according to T10.
 		 * The retry without rtpg_ext_hdr_req set
 		 * handles this.
+		 * Note:  some arrays return a sense key of ILLEGAL_REQUEST
+		 * with ASC 00h if they don't support the extended header.
 		 */
 		if (!(pg->flags & ALUA_RTPG_EXT_HDR_UNSUPP) &&
-		    sense_hdr.sense_key == ILLEGAL_REQUEST &&
-		    sense_hdr.asc == 0x24 && sense_hdr.ascq == 0) {
+		    sense_hdr.sense_key == ILLEGAL_REQUEST) {
 			pg->flags |= ALUA_RTPG_EXT_HDR_UNSUPP;
 			goto retry;
 		}

index 29cdaaf1ed90..3667373f14d2 100644
@@ -2056,6 +2056,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
 	return result;
 
 out_free:
+	em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE);
 	kfree(dvb);
 	dev->dvb = NULL;
 	goto ret;

index 5f316a5e38db..6754e5fcc4c4 100644
@@ -186,13 +186,13 @@ static const u8 vivid_hdmi_edid[256] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x7b,
 
-	0x02, 0x03, 0x3f, 0xf0, 0x51, 0x61, 0x60, 0x5f,
+	0x02, 0x03, 0x3f, 0xf1, 0x51, 0x61, 0x60, 0x5f,
 	0x5e, 0x5d, 0x10, 0x1f, 0x04, 0x13, 0x22, 0x21,
 	0x20, 0x05, 0x14, 0x02, 0x11, 0x01, 0x23, 0x09,
 	0x07, 0x07, 0x83, 0x01, 0x00, 0x00, 0x6d, 0x03,
 	0x0c, 0x00, 0x10, 0x00, 0x00, 0x3c, 0x21, 0x00,
 	0x60, 0x01, 0x02, 0x03, 0x67, 0xd8, 0x5d, 0xc4,
-	0x01, 0x78, 0x00, 0x00, 0xe2, 0x00, 0xea, 0xe3,
+	0x01, 0x78, 0x00, 0x00, 0xe2, 0x00, 0xca, 0xe3,
 	0x05, 0x00, 0x00, 0xe3, 0x06, 0x01, 0x00, 0x4d,
 	0xd0, 0x00, 0xa0, 0xf0, 0x70, 0x3e, 0x80, 0x30,
 	0x20, 0x35, 0x00, 0xc0, 0x1c, 0x32, 0x00, 0x00,

@@ -201,7 +201,7 @@ static const u8 vivid_hdmi_edid[256] = {
 	0x00, 0x00, 0x1a, 0x1a, 0x1d, 0x00, 0x80, 0x51,
 	0xd0, 0x1c, 0x20, 0x40, 0x80, 0x35, 0x00, 0xc0,
 	0x1c, 0x32, 0x00, 0x00, 0x1c, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82,
 };
 
 static int vidioc_querycap(struct file *file, void  *priv,

index 36376c542055..637e26babf89 100644
@@ -157,6 +157,7 @@ static void __init __socfpga_gate_init(struct device_node *node,
 		if (IS_ERR(socfpga_clk->sys_mgr_base_addr)) {
 			pr_err("%s: failed to find altr,sys-mgr regmap!\n",
 					__func__);
+			kfree(socfpga_clk);
 			return;
 		}
 	}

index 371b5ec70087..c5bde3c24c31 100644
@@ -384,7 +384,7 @@ static int gab_remove(struct platform_device *pdev)
 	}
 
 	kfree(adc_bat->psy_desc.properties);
-	cancel_delayed_work(&adc_bat->bat_work);
+	cancel_delayed_work_sync(&adc_bat->bat_work);
 	return 0;
 }
 

index 0ffe5cd3abf6..06b412c43aa7 100644
@@ -392,7 +392,7 @@ static int s3c_adc_bat_remove(struct platform_device *pdev)
 		gpio_free(pdata->gpio_charge_finished);
 	}
 
-	cancel_delayed_work(&bat_work);
+	cancel_delayed_work_sync(&bat_work);
 
 	if (pdata->exit)
 		pdata->exit();

index 26c3ec573a56..3078d47d090a 100644
@@ -3557,7 +3557,7 @@ static int adv76xx_remove(struct i2c_client *client)
 	io_write(sd, 0x6e, 0);
 	io_write(sd, 0x73, 0);
 
-	cancel_delayed_work(&state->delayed_work_enable_hotplug);
+	cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
 	v4l2_async_unregister_subdev(sd);
 	media_entity_cleanup(&sd->entity);
 	adv76xx_unregister_clients(to_state(sd));

index ef1144668809..2148a29909e0 100644
@@ -1976,7 +1976,7 @@ static int adv7511_remove(struct i2c_client *client)
 
 	adv7511_set_isr(sd, false);
 	adv7511_init_setup(sd);
-	cancel_delayed_work(&state->edid_handler);
+	cancel_delayed_work_sync(&state->edid_handler);
 	i2c_unregister_device(state->i2c_edid);
 	if (state->i2c_cec)
 		i2c_unregister_device(state->i2c_cec);

index dcce8d030e5d..c28bf94a7409 100644
@@ -3599,7 +3599,7 @@ static int adv7842_remove(struct i2c_client *client)
 	struct adv7842_state *state = to_state(sd);
 
 	adv7842_irq_enable(sd, false);
-	cancel_delayed_work(&state->delayed_work_enable_hotplug);
+	cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
 	v4l2_device_unregister_subdev(sd);
 	media_entity_cleanup(&sd->entity);
 	adv7842_unregister_clients(sd);

index b3413404f91a..690c1e06fbfa 100644
@@ -82,11 +82,17 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 			}
 		}
 
-		if ((ret = dvb_usb_adapter_stream_init(adap)) ||
-			(ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) ||
-			(ret = dvb_usb_adapter_frontend_init(adap))) {
+		ret = dvb_usb_adapter_stream_init(adap);
+		if (ret)
 			return ret;
-		}
+
+		ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs);
+		if (ret)
+			goto dvb_init_err;
+
+		ret = dvb_usb_adapter_frontend_init(adap);
+		if (ret)
+			goto frontend_init_err;
 
 		/* use exclusive FE lock if there is multiple shared FEs */
 		if (adap->fe_adap[1].fe)

@@ -106,6 +112,12 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 	}
 
 	return 0;
+
+frontend_init_err:
+	dvb_usb_adapter_dvb_exit(adap);
+dvb_init_err:
+	dvb_usb_adapter_stream_exit(adap);
+	return ret;
 }
 
 static int dvb_usb_adapter_exit(struct dvb_usb_device *d)

index 66543518938b..a384d5d83026 100644
@@ -2141,6 +2141,8 @@ int gspca_dev_probe2(struct usb_interface *intf,
 #endif
 	v4l2_ctrl_handler_free(gspca_dev->vdev.ctrl_handler);
 	v4l2_device_unregister(&gspca_dev->v4l2_dev);
+	if (sd_desc->probe_error)
+		sd_desc->probe_error(gspca_dev);
 	kfree(gspca_dev->usb_buf);
 	kfree(gspca_dev);
 	return ret;

index 9e0cf711642b..2550af00d6fb 100644
@@ -102,6 +102,7 @@ struct sd_desc {
 	cam_cf_op config;	/* called on probe */
 	cam_op init;		/* called on probe and resume */
 	cam_op init_controls;	/* called on probe */
+	cam_v_op probe_error;	/* called if probe failed, do cleanup here */
 	cam_op start;		/* called on stream on after URBs creation */
 	cam_pkt_op pkt_scan;
 /* optional operations */

index 9caa5ef9d9e0..b14f30a8f3bd 100644
@@ -534,12 +534,21 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
 static int stv06xx_config(struct gspca_dev *gspca_dev,
 			  const struct usb_device_id *id);
 
+static void stv06xx_probe_error(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	kfree(sd->sensor_priv);
+	sd->sensor_priv = NULL;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.config = stv06xx_config,
 	.init = stv06xx_init,
 	.init_controls = stv06xx_init_controls,
+	.probe_error = stv06xx_probe_error,
 	.start = stv06xx_start,
 	.stopN = stv06xx_stopN,
 	.pkt_scan = stv06xx_pkt_scan,

index 60790df91bfa..397e71481129 100644
@@ -78,9 +78,17 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 		| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
 	cfg |= MDP5_PP_SYNC_CONFIG_VSYNC_COUNT(vclks_line);
 
+	/*
+	 * Tearcheck emits a blanking signal every vclks_line * vtotal * 2 ticks on
+	 * the vsync_clk equating to roughly half the desired panel refresh rate.
+	 * This is only necessary as stability fallback if interrupts from the
+	 * panel arrive too late or not at all, but is currently used by default
+	 * because these panel interrupts are not wired up yet.
+	 */
 	mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_CONFIG_VSYNC(pp_id), cfg);
 	mdp5_write(mdp5_kms,
-		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), 0xfff0);
+		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), (2 * mode->vtotal));
+
 	mdp5_write(mdp5_kms,
 		REG_MDP5_PP_VSYNC_INIT_VAL(pp_id), mode->vdisplay);
 	mdp5_write(mdp5_kms, REG_MDP5_PP_RD_PTR_IRQ(pp_id), mode->vdisplay + 1);

index ae700e445fbc..d057bc29bf4c 100644
@@ -742,7 +742,7 @@ static void amdgpu_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
 		DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
 
 	/* double check that we don't free the table twice */
-	if (!ttm->sg->sgl)
+	if (!ttm->sg || !ttm->sg->sgl)
 		return;
 
 	/* free the sg table and pages again */

index 40c6d6eacea9..da6685700b04 100644
@@ -1707,8 +1707,6 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 		ndlp->nlp_last_elscmd = ELS_CMD_PLOGI;
 
 		lpfc_issue_els_logo(vport, ndlp, 0);
-		ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
-		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 		return ndlp->nlp_state;
 	}
 

index 45445dafc80c..27578816d852 100644
@@ -16637,7 +16637,6 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
 	if (cmd_iocbq) {
 		ndlp = (struct lpfc_nodelist *)cmd_iocbq->context1;
 		lpfc_nlp_put(ndlp);
-		lpfc_nlp_not_used(ndlp);
 		lpfc_sli_release_iocbq(phba, cmd_iocbq);
 	}
 

index 7e300734b345..697e87a25f38 100644
@@ -56,9 +56,6 @@ void lpfc_register_new_vport(struct lpfc_hba *, struct lpfc_vport *,
 void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
 void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
 void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
-void lpfc_supported_pages(struct lpfcMboxq *);
-void lpfc_pc_sli4_params(struct lpfcMboxq *);
-int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *, struct lpfcMboxq *,
 			   uint16_t, uint16_t, bool);
 int lpfc_get_sli4_parameters(struct lpfc_hba *, LPFC_MBOXQ_t *);

198 lines not on this page · raw message

127 lines not on this page · raw message

index 81fb92967b11..afad9cc18d88 100644
@@ -2620,39 +2620,3 @@ lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
 	resume_rpi->event_tag = ndlp->phba->fc_eventTag;
 }
 
-/**
- * lpfc_supported_pages - Initialize the PORT_CAPABILITIES supported pages
- *                        mailbox command.
- * @mbox: pointer to lpfc mbox command to initialize.
- *
- * The PORT_CAPABILITIES supported pages mailbox command is issued to
- * retrieve the particular feature pages supported by the port.
- **/
-void
-lpfc_supported_pages(struct lpfcMboxq *mbox)
-{
-	struct lpfc_mbx_supp_pages *supp_pages;
-
-	memset(mbox, 0, sizeof(*mbox));
-	supp_pages = &mbox->u.mqe.un.supp_pages;
-	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES);
-	bf_set(cpn, supp_pages, LPFC_SUPP_PAGES);
-}
-
-/**
- * lpfc_pc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params mbox cmd.
- * @mbox: pointer to lpfc mbox command to initialize.
- *
- * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to
- * retrieve the particular SLI4 features supported by the port.
- **/
-void
-lpfc_pc_sli4_params(struct lpfcMboxq *mbox)
-{
-	struct lpfc_mbx_pc_sli4_params *sli4_params;
-
-	memset(mbox, 0, sizeof(*mbox));
-	sli4_params = &mbox->u.mqe.un.sli4_params;
-	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES);
-	bf_set(cpn, sli4_params, LPFC_SLI4_PARAMETERS);
-}

index ca7967e390f1..5c0aa2c5fd55 100644
@@ -1754,7 +1754,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	if (mfs < FC_SP_MIN_MAX_PAYLOAD || mfs > FC_SP_MAX_MAX_PAYLOAD) {
 		FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, "
-			     "lport->mfs:%hu\n", mfs, lport->mfs);
+			     "lport->mfs:%u\n", mfs, lport->mfs);
 		fc_lport_error(lport, fp);
 		goto out;
 	}