iio: bme680_i2c: Remove ACPI support
PATCH v2 1/1 iio: bme680_i2c: Remove ACPI support
With CONFIG_ACPI=n and -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not used
Apparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the bme680_i2c driver.
---
v2: Instead of making bme680_acpi_match conditional,
remove ACPI support entirely since the ACPI ID is not valid.
drivers/iio/chemical/bme680_i2c.c | 8 -------- 1 file changed, 8 deletions(-)
drivers/iio/chemical/bme680_i2c.c +0 -8
@@ -11,7 +11,6 @@* Note: SDO pin cannot be left floating otherwise I2C address * will be undefined. */ -#include <linux/acpi.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/regmap.h>
@@ -42,12 +41,6 @@ static const struct i2c_device_id bme680_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, bme680_i2c_id); -static const struct acpi_device_id bme680_acpi_match[] = { - {"BME0680" ,0 }, - {}, -}; -MODULE_DEVICE_TABLE (acpi, bme680_acpi_match); -static const struct of_device_id bme680_of_i2c_match[] = { { .compatible ="bosch,bme680" , }, {},
@@ -57,7 +50,6 @@ MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);static struct i2c_driver bme680_i2c_driver = { .driver = { .name ="bme680_i2c" , - .acpi_match_table =ACPI_PTR (bme680_acpi_match), .of_match_table = bme680_of_i2c_match, }, .probe = bme680_i2c_probe,
Signature · 1 line
2.25.1
Hi,
Quoted 8 lines · Guenter Roeck
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not usedApparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.
Quoted 8 lines
Reported-by kernel test robot <[email protected]>Cc Andy Shevchenko <[email protected]>Cc Hans de Goede <[email protected]>Signed-off-by Guenter Roeck <[email protected]>---
v2: Instead of makingbme680_acpi_matchconditional,
remove ACPI support entirely since the ACPI ID is not valid.
Thanks, patch looks good to me:
Regards,
Hans
Quoted 38 lines
drivers/iio/chemical/bme680_i2c.c | 8 -------- 1 file changed, 8 deletions(-)drivers/iio/chemical/bme680_i2c.c +0
-8@@ -11,7 +11,6 @@* Note: SDO pin cannot be left floating otherwise I2C address * will be undefined. */ -#include <linux/acpi.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/regmap.h> @@ -42,12 +41,6 @@ static const struct i2c_device_id bme680_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, bme680_i2c_id); -static const struct acpi_device_id bme680_acpi_match[] = { - {"BME0680" ,0 }, - {}, -}; -MODULE_DEVICE_TABLE (acpi, bme680_acpi_match); -static const struct of_device_id bme680_of_i2c_match[] = { { .compatible ="bosch,bme680" , }, {},@@ -57,7 +50,6 @@ MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);static struct i2c_driver bme680_i2c_driver = { .driver = { .name ="bme680_i2c" , - .acpi_match_table =ACPI_PTR (bme680_acpi_match), .of_match_table = bme680_of_i2c_match, }, .probe = bme680_i2c_probe,
Quoted 8 lines · Guenter Roeck
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not usedApparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.
with the SPI part amended in the same way.
Thanks!
Quoted 48 lines
Reported-by kernel test robot <[email protected]>Cc Andy Shevchenko <[email protected]>Cc Hans de Goede <[email protected]>Signed-off-by Guenter Roeck <[email protected]>---
v2: Instead of makingbme680_acpi_matchconditional,
remove ACPI support entirely since the ACPI ID is not valid.drivers/iio/chemical/bme680_i2c.c | 8 -------- 1 file changed, 8 deletions(-)drivers/iio/chemical/bme680_i2c.c +0
-9@@ -11,7 +11,6 @@* Note: SDO pin cannot be left floating otherwise I2C address * will be undefined. */ -#include <linux/acpi.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/regmap.h> @@ -42,12 +41,6 @@ static const struct i2c_device_id bme680_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, bme680_i2c_id); -static const struct acpi_device_id bme680_acpi_match[] = { - {"BME0680" ,0 }, - {}, -}; -MODULE_DEVICE_TABLE (acpi, bme680_acpi_match); -static const struct of_device_id bme680_of_i2c_match[] = { { .compatible ="bosch,bme680" , }, {},@@ -57,7 +50,6 @@ MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);static struct i2c_driver bme680_i2c_driver = { .driver = { .name ="bme680_i2c" , - .acpi_match_table =ACPI_PTR (bme680_acpi_match), .of_match_table = bme680_of_i2c_match, }, .probe = bme680_i2c_probe, --2.25.1
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 7 lines · Andy Shevchenko
Quoted 6 lines · Guenter Roeck
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not used
Quoted 7 lines
Quoted 2 lines
Apparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.Reviewed-by Andy Shevchenko <[email protected]>with the SPI part amended in the same way.
Right. I just sent a patch doing that. Oddly enough 0-day didn't complain about that one to me, nor about many other drivers with the same problem. No idea how it decides if and when to make noise.
Is there a way to determine invalid ACPI IDs ? I could write a coccinelle script to remove the code automatically.
Thanks,
Guenter
Hi,
Quoted 13 lines · Guenter Roeck
Quoted 12 lines · Andy Shevchenko
Quoted 8 lines · Guenter Roeck
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not usedApparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.Reviewed-by Andy Shevchenko <[email protected]>
Quoted 7 lines
Quoted 2 lines
with the SPI part amended in the same way.
Right. I just sent a patch doing that. Oddly enough 0-day didn't complain about that one to me, nor about many other drivers with the same problem. No idea how it decides if and when to make noise.
Is there a way to determine invalid ACPI IDs ?
No, unfortunately not. There is a format which ACPI IDs are supposed to follow, but some "out in the wild" API ids don't follow this; and many fake (made up) ACPI ids do follow it...
We (mostly Andy and me) are not even 100% sure this one is a fake ACPI ID, but we do pretty strongly believe that it is.
Regards,
Hans
Quoted 22 lines · Hans de Goede
Hi,
Quoted 19 lines · Guenter Roeck
Quoted 7 lines · Andy Shevchenko
Quoted 6 lines · Guenter Roeck
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not usedQuoted 7 lines
Quoted 2 lines
Apparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.Reviewed-by Andy Shevchenko <[email protected]>with the SPI part amended in the same way.
Right. I just sent a patch doing that. Oddly enough 0-day didn't complain about that one to me, nor about many other drivers with the same problem. No idea how it decides if and when to make noise.
Quoted 9 lines
Quoted 1 line
Is there a way to determine invalid ACPI IDs ?
No, unfortunately not. There is a format which ACPI IDs are supposed to follow, but some "out in the wild" API ids don't follow this; and many fake (made up) ACPI ids do follow it...
We (mostly Andy and me) are not even 100% sure this one is a fake ACPI ID, but we do pretty strongly believe that it is.
What a mess :-(
Guenter
Quoted 2 lines · Guenter Roeck
Quoted 1 line · Hans de Goede
On 5/6/21 3:37 PM, Guenter Roeck wrote:
...
Quoted 5 lines
Quoted 3 lines
We (mostly Andy and me) are not even 100% sure this one is a fake ACPI ID, but we do pretty strongly believe that it is.
What a mess :-(
What we can do is a checkpatch-alike check for vendor ID to be registered in [1] and issue a warning if not. At least it alerts maintainers. Joe, do you think it is doable or we should have a separate tool for that? (Because I have no clue how checkpatch cohabits with internet connection, otherwise the problem with synchronisation of that registry might be a problem)
[1]: https://uefi.org/PNP_ACPI_Registry
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 10 lines · Andy Shevchenko
Quoted 2 lines · Guenter Roeck
Quoted 1 line · Hans de Goede
On 5/6/21 3:37 PM, Guenter Roeck wrote:
...
Quoted 4 lines
Quoted 3 lines
We (mostly Andy and me) are not even 100% sure this one is a fake ACPI ID, but we do pretty strongly believe that it is.
Quoted 8 lines
Quoted 1 line
What a mess :-(
What we can do is a checkpatch-alike check for vendor ID to be registered in [1] and issue a warning if not. At least it alerts maintainers. Joe, do you think it is doable or we should have a separate tool for that? (Because I have no clue how checkpatch cohabits with internet connection, otherwise the problem with synchronisation of that registry might be a problem)
Perhaps best to have a separate scriptable tool and if necessary have checkpatch use it like the spdxcheck block.
scripts/checkpatch.pl-sub is_SPDX_License_valid {scripts/checkpatch.pl- my ($license) = @_;scripts/checkpatch.pl-scripts/checkpatch.pl: return 1 if (!$tree || which("python") eq "" || !(-e "$root/scripts/spdxcheck.py") || !(-e "$gitroot")); scripts/checkpatch.pl-
scripts/checkpatch.pl- my $root_path = abs_path($root); scripts/checkpatch.pl: my $status = `cd "$root_path"; echo "$license" | python scripts/spdxcheck.py -`; scripts/checkpatch.pl- return 0 if ($status ne ""); scripts/checkpatch.pl- return 1;
scripts/checkpatch.pl-}
[]
scripts/checkpatch.pl- } elsif ($rawline =~ /(SPDX-License-Identifier: .*)/) {scripts/checkpatch.pl- my $spdx_license = $1;scripts/checkpatch.pl: if (!is_SPDX_License_valid($spdx_license)) {scripts/checkpatch.pl- WARN("SPDX_LICENSE_TAG",scripts/checkpatch.pl- "'$spdx_license' is not supported in LICENSES/...\n" . $herecurr);scripts/checkpatch.pl- }
Quoted 11 lines · Guenter Roeck
Quoted 10 lines · Andy Shevchenko
Quoted 8 lines · Guenter Roeck
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not usedApparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.
Quoted 7 lines
Quoted 4 lines
Reviewed-by Andy Shevchenko <[email protected]>with the SPI part amended in the same way.
Right. I just sent a patch doing that. Oddly enough 0-day didn't complain about that one to me, nor about many other drivers with the same problem. No idea how it decides if and when to make noise.
randconfig I believe.
Quoted 2 lines
Is there a way to determine invalid ACPI IDs ? I could write a coccinelle script to remove the code automatically.
As Hans said...
My understanding that most of the fake IDs come into life due to:
- people apply similar rules to them as they knew about OF case (and
certain maintainers blindly allowed that)
- people in big companies need to quickly prototype something without
giving a crap about ACPI specification and / or process
The last part (I believe the smallest one) is vendors who heard about ACPI, but haven't enough knowledge about the process.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 5 lines · On Wed, 5 May 2021 20:43:32 -0700 Guenter Roeck <[email protected]> wrote:
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not used
Quoted 7 lines
Apparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.Reported-by kernel test robot <[email protected]>Cc Andy Shevchenko <[email protected]>Cc Hans de Goede <[email protected]>Signed-off-by Guenter Roeck <[email protected]>
A note for these is that I'll change the patch titles when applying. We aren't removing ACPI support from the drivers, we are simply removing the ACPI ID table entries. For most of these PRP0001 magic will work just fine with the OF table. That's probably the right way for small companies etc to use these in products without having to jump through the hoops of getting an ACPI ID.
Jonathan
Quoted 41 lines
---
v2: Instead of makingbme680_acpi_matchconditional,
remove ACPI support entirely since the ACPI ID is not valid.drivers/iio/chemical/bme680_i2c.c | 8 -------- 1 file changed, 8 deletions(-)drivers/iio/chemical/bme680_i2c.c +0
-8@@ -11,7 +11,6 @@* Note: SDO pin cannot be left floating otherwise I2C address * will be undefined. */ -#include <linux/acpi.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/regmap.h> @@ -42,12 +41,6 @@ static const struct i2c_device_id bme680_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, bme680_i2c_id); -static const struct acpi_device_id bme680_acpi_match[] = { - {"BME0680" ,0 }, - {}, -}; -MODULE_DEVICE_TABLE (acpi, bme680_acpi_match); -static const struct of_device_id bme680_of_i2c_match[] = { { .compatible ="bosch,bme680" , }, {},@@ -57,7 +50,6 @@ MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);static struct i2c_driver bme680_i2c_driver = { .driver = { .name ="bme680_i2c" , - .acpi_match_table =ACPI_PTR (bme680_acpi_match), .of_match_table = bme680_of_i2c_match, }, .probe = bme680_i2c_probe,
Quoted 16 lines · Jonathan Cameron
Quoted 5 lines · On Wed, 5 May 2021 20:43:32 -0700 Guenter Roeck <[email protected]> wrote:
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not usedQuoted 7 lines
Apparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.Reported-by kernel test robot <[email protected]>Cc Andy Shevchenko <[email protected]>Cc Hans de Goede <[email protected]>Signed-off-by Guenter Roeck <[email protected]>
Quoted 7 lines
A note for these is that I'll change the patch titles when applying. We aren't removing ACPI support from the drivers, we are simply removing the ACPI ID table entries. For most of these PRP0001 magic will work just fine with the OF table. That's probably the right way for small companies etc to use these in products without having to jump through the hoops of getting an ACPI ID.
Ok, no problem. I'll keep that in mind if I hit any others.
Thanks,
Guenter
Quoted 16 lines · Jonathan Cameron
Quoted 5 lines · On Wed, 5 May 2021 20:43:32 -0700 Guenter Roeck <[email protected]> wrote:
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not usedQuoted 7 lines
Apparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.Reported-by kernel test robot <[email protected]>Cc Andy Shevchenko <[email protected]>Cc Hans de Goede <[email protected]>Signed-off-by Guenter Roeck <[email protected]>
Quoted 7 lines
A note for these is that I'll change the patch titles when applying. We aren't removing ACPI support from the drivers, we are simply removing the ACPI ID table entries. For most of these PRP0001 magic will work just fine with the OF table. That's probably the right way for small companies etc to use these in products without having to jump through the hoops of getting an ACPI ID.
Below is what Coccinelle tells me about ACPI IDs in drivers/iio. The script (tries) to do a prefix match of all ACPI IDs it finds against the PNP and ACPI ID databases from https://uefi.org/PNP_ACPI_Registry.
Andy, Hans, does that look about right ?
Next question is what to do with the mismatches and with false negatives such as:
drivers/iio/accel/stk8312.c
STK8312: match (prefix) against STK (SANTAK CORP.)drivers/iio/light/isl29018.c
ISL29018: match (prefix) against ISL (Isolation Systems)
ISL29023: match (prefix) against ISL (Isolation Systems)
ISL29035: match (prefix) against ISL (Isolation Systems)drivers/iio/gyro/bmg160_i2c.c
BMI055B: match (prefix) against BMI (Benson Medical Instruments Company)
BMI088B: match (prefix) against BMI (Benson Medical Instruments Company)
[ and how to auto-detect those - any idea ? ]
If you like I'll be happy to send you the coccinelle script I wrote to play with.
Guenter
---drivers/iio/light/stk3310.c
STK3310: match (prefix) against STK (SANTAK CORP.)
STK3311: match (prefix) against STK (SANTAK CORP.)
STK3335: match (prefix) against STK (SANTAK CORP.)drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
INVN6000: match (ACPI ID) against INVN (Invensense, Inc)drivers/iio/imu/fxos8700_i2c.c
FXOS8700: No matchdrivers/iio/dac/ad5592r.c
ADS5592: match (prefix) against ADS (Analog Devices Inc)drivers/iio/accel/stk8312.c
STK8312: match (prefix) against STK (SANTAK CORP.)drivers/iio/light/us5182d.c
USD5182: match (prefix) against USD (U.S. Digital Corporation)drivers/iio/imu/fxos8700_spi.c
FXOS8700: No matchdrivers/iio/dac/ad5593r.c
ADS5593: match (prefix) against ADS (Analog Devices Inc)drivers/iio/accel/stk8ba50.c
STK8BA50: match (prefix) against STK (SANTAK CORP.)drivers/iio/accel/bma220_spi.c
BMA0220: No matchdrivers/iio/magnetometer/ak8975.c
AK8975: No match
AK8963: No match
INVN6500: match (ACPI ID) against INVN (Invensense, Inc)
AK009911: No match
AK09911: No match
AKM9911: match (prefix) against AKM (Asahi Kasei Microsystems Company Ltd)
AK09912: No matchdrivers/iio/imu/bmi160/bmi160_i2c.c
BMI0160: match (prefix) against BMI (Benson Medical Instruments Company)drivers/iio/chemical/bme680_i2c.c
BME0680: No matchdrivers/iio/accel/mxc6255.c
MXC6225: No match
MXC6255: No matchdrivers/iio/accel/da280.c
MIRAACC: match (prefix) against MIR (Miro Computer Prod.)drivers/iio/proximity/sx9310.c
STH9310: match (prefix) against STH (Semtech Corporation)
STH9311: match (prefix) against STH (Semtech Corporation)drivers/iio/accel/bmc150-accel-i2c.c
BSBA0150: No match
BMC150A: No match
BMI055A: match (prefix) against BMI (Benson Medical Instruments Company)
BMA0255: No match
BMA250E: No match
BMA222: No match
BMA222E: No match
BMA0280: No match
BOSC0200: match (ACPI ID) against BOSC (Robert Bosch GmbH)drivers/iio/light/rpr0521.c
RPR0521: No matchdrivers/iio/humidity/hts221_i2c.c
SMO9100: match (prefix) against SMO (STMicroelectronics)drivers/iio/adc/ti-adc108s102.c
INT3495: match (prefix) against INT (Interphase Corporation)drivers/iio/accel/kxcjk-1013.c
KXCJ1013: No match
KXCJ1008: No match
KXCJ9000: No match
KIOX0008: match (ACPI ID) against KIOX (Kionix, Inc.)
KIOX0009: match (ACPI ID) against KIOX (Kionix, Inc.)
KIOX000A: match (ACPI ID) against KIOX (Kionix, Inc.)
KIOX010A: match (ACPI ID) against KIOX (Kionix, Inc.)
KIOX020A: match (ACPI ID) against KIOX (Kionix, Inc.)
KXTJ1009: No match
KXJ2109: No match
SMO8500: match (prefix) against SMO (STMicroelectronics)drivers/iio/magnetometer/mmc35240.c
MMC35240: No matchdrivers/iio/light/apds9960.c
MSHW0184: match (ACPI ID) against MSHW (Microsoft Corporation)drivers/iio/accel/bmc150-accel-spi.c
BSBA0150: No match
BMC150A: No match
BMI055A: match (prefix) against BMI (Benson Medical Instruments Company)
BMA0255: No match
BMA250E: No match
BMA222: No match
BMA222E: No match
BMA0280: No matchdrivers/iio/proximity/sx9500.c
SSX9500: No match
SASX9500: match (prefix) against SAS (Stores Automated Systems Inc)drivers/iio/imu/bmi160/bmi160_spi.c
BMI0160: match (prefix) against BMI (Benson Medical Instruments Company)drivers/iio/chemical/bme680_spi.c
BME0680: No matchdrivers/iio/accel/mxc4005.c
MXC4005: No match
MXC6655: No matchdrivers/iio/pressure/hp206c.c
HOP206C: No matchdrivers/iio/light/isl29018.c
ISL29018: match (prefix) against ISL (Isolation Systems)
ISL29023: match (prefix) against ISL (Isolation Systems)
ISL29035: match (prefix) against ISL (Isolation Systems)drivers/iio/accel/mma9551.c
MMA9551: match (prefix) against MMA (Micromedia AG)drivers/iio/potentiometer/max5487.c
MAX5487: match (prefix) against MAX (Rogen Tech Distribution Inc)
MAX5488: match (prefix) against MAX (Rogen Tech Distribution Inc)
MAX5489: match (prefix) against MAX (Rogen Tech Distribution Inc)drivers/iio/light/jsa1212.c
JSA1212: No matchdrivers/iio/imu/kmx61.c
KMX61021: No matchdrivers/iio/pressure/st_pressure_i2c.c
SNO9210: match (prefix) against SNO (SINOSUN TECHNOLOGY CO., LTD)drivers/iio/light/pa12203001.c
TXCPA122: No matchdrivers/iio/light/cm32181.c
CPLM3218: match (ACPI ID) against CPLM (Capella Microsystems Inc.)drivers/iio/humidity/am2315.c
AOS2315: No matchdrivers/iio/accel/st_accel_i2c.c
SMO8840: match (prefix) against SMO (STMicroelectronics)
SMO8A90: match (prefix) against SMO (STMicroelectronics)drivers/iio/accel/mma7660.c
MMA7660: match (prefix) against MMA (Micromedia AG)drivers/iio/magnetometer/bmc150_magn_spi.c
BMC150B: No match
BMC156B: No match
BMM150B: No matchdrivers/iio/light/max44000.c
MAX44000: match (prefix) against MAX (Rogen Tech Distribution Inc)drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
INVN6500: match (ACPI ID) against INVN (Invensense, Inc)drivers/iio/gyro/bmg160_i2c.c
BMG0160: No match
BMI055B: match (prefix) against BMI (Benson Medical Instruments Company)
BMI088B: match (prefix) against BMI (Benson Medical Instruments Company)drivers/iio/adc/ti-adc128s052.c
AANT1280: match (ACPI ID) against AANT (AAEON Technology Inc.)drivers/iio/accel/mma9553.c
MMA9553: match (prefix) against MMA (Micromedia AG)drivers/iio/magnetometer/bmc150_magn_i2c.c
BMC150B: No match
BMC156B: No match
BMM150B: No matchdrivers/iio/light/ltr501.c
LTER0501: No match
LTER0559: No match
LTER0301: No match
A message that is not in the archive (sent off-list or not yet received): CAHp75Vfa3GT9bnimxw7EJsJyRF8HZP3PGsUNikSScuNiU4qArg@mail.gmail.com
Hi,
Quoted 53 lines · Andy Shevchenko
On Saturday, May 8, 2021, Guenter Roeck <[email protected] <mailto:[email protected]>> wrote:
On Fri, May 07, 2021 at 10:31:54AM +0100, Jonathan Cameron wrote:
> On Wed, 5 May 2021 20:43:32 -0700
> Guenter Roeck <[email protected] <mailto:[email protected]>> wrote:
>
> > WithCONFIG_ACPI=nand -Werror, 0-day reports:
> >
> >drivers/iio/chemical/bme680_i2c.c:46:36: error:
> > 'bme680_acpi_match' defined but not used
> >
> > Apparently BME0680 is not a valid ACPI ID. Remove it and with it
> > ACPI support from thebme680_i2cdriver.
> >
> > Reported-by: kernel test robot <[email protected] <mailto:[email protected]>> > > Cc: Andy Shevchenko <[email protected] <mailto:[email protected]>> > > Cc: Hans de Goede <[email protected] <mailto:[email protected]>> > > Signed-off-by: Guenter Roeck <[email protected] <mailto:[email protected]>> >
> A note for these is that I'll change the patch titles when applying. > We aren't removing ACPI support from the drivers, we are simply
> removing the ACPI ID table entries. For most of these PRP0001 magic > will work just fine with the OF table. That's probably the
> right way for small companies etc to use these in products without
> having to jump through the hoops of getting an ACPI ID.
>Below is what Coccinelle tells me about ACPI IDs in
drivers/iio.
The script (tries) to do a prefix match of all ACPI IDs it finds against
the PNP and ACPI ID databases from https://uefi.org/PNP_ACPI_Registry <https://uefi.org/PNP_ACPI_Registry>.Andy, Hans, does that look about right ?
The result looks nice for the first step!
Next question is what to do with the mismatches and with false negatives such as:
drivers/iio/accel/stk8312.c
STK8312: match (prefix) against STK (SANTAK CORP.)drivers/iio/light/isl29018.c
ISL29018: match (prefix) against ISL (Isolation Systems)
ISL29023: match (prefix) against ISL (Isolation Systems)
ISL29035: match (prefix) against ISL (Isolation Systems)drivers/iio/gyro/bmg160_i2c.c
Quoted 7 lines
BMI055B: match (prefix) against BMI (Benson Medical Instruments Company)
BMI088B: match (prefix) against BMI (Benson Medical Instruments Company)These I think the real ones from the existing devices.
No that is wrong, these are Bosch sensors, so the BOSC0200 entry for the companion accelerometer is the only entry using the official company prefix. At least "BMA" ("BMA250E") and "BSG" ("BSG1160", "BSG2150") are also know to be used as prefixes for ACPI HIDs which are in active use for Bosch sensors :|
And Benson Medical Instruments Company has nothing to do with these sensors :|
Regards,
Hans
Hi again,
Quoted 64 lines · Hans de Goede
Hi,
Quoted 53 lines · Andy Shevchenko
On Saturday, May 8, 2021, Guenter Roeck <[email protected] <mailto:[email protected]>> wrote:
On Fri, May 07, 2021 at 10:31:54AM +0100, Jonathan Cameron wrote:
> On Wed, 5 May 2021 20:43:32 -0700
> Guenter Roeck <[email protected] <mailto:[email protected]>> wrote:
>
> > WithCONFIG_ACPI=nand -Werror, 0-day reports:
> >
> >drivers/iio/chemical/bme680_i2c.c:46:36: error:
> > 'bme680_acpi_match' defined but not used
> >
> > Apparently BME0680 is not a valid ACPI ID. Remove it and with it
> > ACPI support from thebme680_i2cdriver.
> >
> > Reported-by: kernel test robot <[email protected] <mailto:[email protected]>> > > Cc: Andy Shevchenko <[email protected] <mailto:[email protected]>> > > Cc: Hans de Goede <[email protected] <mailto:[email protected]>> > > Signed-off-by: Guenter Roeck <[email protected] <mailto:[email protected]>> >
> A note for these is that I'll change the patch titles when applying. > We aren't removing ACPI support from the drivers, we are simply
> removing the ACPI ID table entries. For most of these PRP0001 magic > will work just fine with the OF table. That's probably the
> right way for small companies etc to use these in products without
> having to jump through the hoops of getting an ACPI ID.
>Below is what Coccinelle tells me about ACPI IDs in
drivers/iio.
The script (tries) to do a prefix match of all ACPI IDs it finds against
the PNP and ACPI ID databases from https://uefi.org/PNP_ACPI_Registry <https://uefi.org/PNP_ACPI_Registry>.Andy, Hans, does that look about right ?
The result looks nice for the first step!
Next question is what to do with the mismatches and with false negatives such as:
drivers/iio/accel/stk8312.c
STK8312: match (prefix) against STK (SANTAK CORP.)drivers/iio/light/isl29018.c
ISL29018: match (prefix) against ISL (Isolation Systems)
ISL29023: match (prefix) against ISL (Isolation Systems)
ISL29035: match (prefix) against ISL (Isolation Systems)drivers/iio/gyro/bmg160_i2c.cQuoted 7 lines
BMI055B: match (prefix) against BMI (Benson Medical Instruments Company)
BMI088B: match (prefix) against BMI (Benson Medical Instruments Company)These I think the real ones from the existing devices.
Quoted 8 lines
No that is wrong, these are Bosch sensors, so the BOSC0200 entry for the companion accelerometer is the only entry using the official company prefix. At least "BMA" ("BMA250E") and "BSG" ("BSG1160", "BSG2150") are also know to be used as prefixes for ACPI HIDs which are in active use for Bosch sensors :|
And Benson Medical Instruments Company has nothing to do with these sensors :|
p.s.
And there also is the Lenovo Yoga 300 11IBR convertible laptop which has 2 Bosch accelerometers, 1 in the display and 1 in the base/keyboard described in a single ACPI "Device (ACC1) {}" ACPI fwnode (so not 1 fwnode per sensor), and this single node to describe 2 separate I2C connected ICs has a ACPI HID of "DUAL250E" (*), how is that for sticking to the HID naming spec ?
I really have the feeling that the naming spec is not worth much more then the paper it is written on, it is really really easy to find a ton of examples out in the field which don't adhere to it.
Regards,
Hans
*) I recently got my hands on one of these and I still need to add support for this to the kernel
On 5/8/21 12:48 AM, Andy Shevchenko wrote:
[ ... ]
Quoted 7 lines
If you like I'll be happy to send you the coccinelle script I wrote to play with.
Please share (maybe even thru GH gist or so?)
https://github.com/groeck/coccinelle-patches, subdirectory 'acpi'.
With "MODE=patch", it "only" touches 258 files in the kernel, and 43 files in drivers/iio.
From the other comments it looks like we would need another csv based match table, something like
ID, "valid" | "invalid"
to override the results from the published ID tables.
Guenter
Jonathan Cameron
maintainerQuoted 5 lines · On Wed, 5 May 2021 20:43:32 -0700 Guenter Roeck <[email protected]> wrote:
With
CONFIG_ACPI=nand -Werror, 0-day reports:
drivers/iio/chemical/bme680_i2c.c:46:36: error:
'bme680_acpi_match' defined but not used
Quoted 7 lines
Apparently BME0680 is not a valid ACPI ID. Remove it and with it ACPI support from the
bme680_i2cdriver.Reported-by kernel test robot <[email protected]>Cc Andy Shevchenko <[email protected]>Cc Hans de Goede <[email protected]>Signed-off-by Guenter Roeck <[email protected]>
Message tweaked to reflect PRP0001 route which should work just fine with ACPI and this driver.
Jonathan
Quoted 41 lines
---
v2: Instead of makingbme680_acpi_matchconditional,
remove ACPI support entirely since the ACPI ID is not valid.drivers/iio/chemical/bme680_i2c.c | 8 -------- 1 file changed, 8 deletions(-)drivers/iio/chemical/bme680_i2c.c +0
-8@@ -11,7 +11,6 @@* Note: SDO pin cannot be left floating otherwise I2C address * will be undefined. */ -#include <linux/acpi.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/regmap.h> @@ -42,12 +41,6 @@ static const struct i2c_device_id bme680_i2c_id[] = { };MODULE_DEVICE_TABLE (i2c, bme680_i2c_id); -static const struct acpi_device_id bme680_acpi_match[] = { - {"BME0680" ,0 }, - {}, -}; -MODULE_DEVICE_TABLE (acpi, bme680_acpi_match); -static const struct of_device_id bme680_of_i2c_match[] = { { .compatible ="bosch,bme680" , }, {},@@ -57,7 +50,6 @@ MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);static struct i2c_driver bme680_i2c_driver = { .driver = { .name ="bme680_i2c" , - .acpi_match_table =ACPI_PTR (bme680_acpi_match), .of_match_table = bme680_of_i2c_match, }, .probe = bme680_i2c_probe,