usb: dwc2: Fix gadget DMA unmap direction

The dwc2 gadget support maps and unmaps DMA buffers as necessary. When mapping and unmapping it uses the direction of the endpoint to select the direction of the DMA transfer, but this fails for Control OUT transfers because the unmap occurs after the endpoint direction has been reversed for the status phase.

A possible solution would be to unmap the buffer before the direction is changed, but a safer, less invasive fix is to remember the buffer direction independently of the endpoint direction.

Fixes fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software")

Signed-off-by Phil Elwell <[email protected]>

---
  drivers/usb/dwc2/core.h   | 2 ++
  drivers/usb/dwc2/gadget.c | 3 ++-
  2 files changed, 4 insertions(+), 1 deletion(-)

drivers/usb/dwc2/core.h +2 -0

index da5ac4a4595b..ab6b815e0089 100644
@@ -113,6 +113,7 @@ struct dwc2_hsotg_req;
   * @debugfs: File entry for debugfs file for this endpoint.
   * @dir_in: Set to true if this endpoint is of the IN direction, which
   *          means that it is sending data to the Host.
+ * @map_dir: Set to the value of dir_in when the DMA buffer is mapped.
   * @index: The index for the endpoint registers.
   * @mc: Multi Count - number of transactions per microframe
   * @interval: Interval for periodic endpoints, in frames or microframes.

@@ -162,6 +163,7 @@ struct dwc2_hsotg_ep {
  	unsigned short		fifo_index;
 
  	unsigned char           dir_in;
+	unsigned char           map_dir;
  	unsigned char           index;
  	unsigned char           mc;
  	u16                     interval;

drivers/usb/dwc2/gadget.c +2 -1

index e6bb1bdb2760..184964174dc0 100644
@@ -422,7 +422,7 @@ static void dwc2_hsotg_unmap_dma(struct dwc2_hsotg *hsotg,
  {
  	struct usb_request *req = &hs_req->req;
 
-	usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
+	usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->map_dir);
  }
 
  /*

@@ -1242,6 +1242,7 @@ static int dwc2_hsotg_map_dma(struct dwc2_hsotg *hsotg,
  {
  	int ret;
 
+	hs_ep->map_dir = hs_ep->dir_in;
  	ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
  	if (ret)
  		goto dma_error;