hwmon: (dell-smm-hwmon) Fix index values
Subsystems (2)
PATCH 1/1 hwmon: (dell-smm-hwmon) Fix index values
From: Armin Wolf <[email protected]>
When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls.
Fix those values.
---
Tested on a Dell Latitude C600.
--- drivers/hwmon/dell-smm-hwmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/hwmon/dell-smm-hwmon.c +2 -2
@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {static umode_t i8k_is_visible (struct kobject *kobj,struct attribute *attr,int index) { -if (disallow_fan_support && index >=8 ) +if (disallow_fan_support && index >=20 )return 0 ;if (disallow_fan_type_call && - (index ==9 || index ==12 || index ==15 )) + (index ==21 || index ==25 || index ==28 ))return 0 ;if (index >=0 && index <=1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1 ))
--
2.20.1
Quoted 6 lines · On Thursday 13 May 2021 17:45:46 [email protected] wrote:
From: Armin Wolf <[email protected]>
When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls.
Fix those values.
Do you mean this change, right?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1bb46a20e73b0bb3364cff3839c9f716ed327770
Yes, it looks like that it should have been part of that change.
Therefore I suggest to add Fixes tag:
Otherwise looks good!
For future development I would suggest to rewrite/drop these magic numbers as same problem can be easily repeated in future.
Quoted 27 lines
Signed-off-by Armin Wolf <[email protected]>---
Tested on a Dell Latitude C600.--- drivers/hwmon/dell-smm-hwmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/hwmon/dell-smm-hwmon.c +2
-3@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {static umode_t i8k_is_visible (struct kobject *kobj,struct attribute *attr,int index) { -if (disallow_fan_support && index >=8 ) +if (disallow_fan_support && index >=20 )return 0 ;if (disallow_fan_type_call && - (index ==9 || index ==12 || index ==15 )) + (index ==21 || index ==25 || index ==28 ))return 0 ;if (index >=0 && index <=1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1 )) --2.20.1
Guenter Roeck
maintainerQuoted 15 lines · Pali Rohár
Quoted 6 lines · On Thursday 13 May 2021 17:45:46 [email protected] wrote:
From: Armin Wolf <[email protected]>
When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls.
Fix those values.Do you mean this change, right?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1bb46a20e73b0bb3364cff3839c9f716ed327770Yes, it looks like that it should have been part of that change.
Therefore I suggest to add Fixes tag:
Quoted 9 lines
Fixes 1bb46a20e73b ("hwmon: (dell-smm) Support up to 10 temp sensors")Otherwise looks good!
Reviewed-by Pali Rohár <[email protected]>For future development I would suggest to rewrite/drop these magic numbers as same problem can be easily repeated in future.
The best solution would be to rewrite the driver to use hwmon_device_register_with_info(), but that should be done by someone with access to the hardware.
Guenter
Quoted 27 lines
Quoted 27 lines
Signed-off-by Armin Wolf <[email protected]>---
Tested on a Dell Latitude C600.--- drivers/hwmon/dell-smm-hwmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/hwmon/dell-smm-hwmon.c +2
-3@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {static umode_t i8k_is_visible (struct kobject *kobj,struct attribute *attr,int index) { -if (disallow_fan_support && index >=8 ) +if (disallow_fan_support && index >=20 )return 0 ;if (disallow_fan_type_call && - (index ==9 || index ==12 || index ==15 )) + (index ==21 || index ==25 || index ==28 ))return 0 ;if (index >=0 && index <=1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1 )) --2.20.1
Quoted 27 lines · On 13.05.21 18:53 Guenter Roeck wrote:
Quoted 16 lines · Pali Rohár
Quoted 6 lines · On Thursday 13 May 2021 17:45:46 [email protected] wrote:
From: Armin Wolf <[email protected]>
When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls.
Fix those values.Do you mean this change, right?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1bb46a20e73b0bb3364cff3839c9f716ed327770Yes, it looks like that it should have been part of that change.
Therefore I suggest to add Fixes tag:
Quoted 9 lines
Fixes 1bb46a20e73b ("hwmon: (dell-smm) Support up to 10 temp sensors")Otherwise looks good!
Reviewed-by Pali Rohár <[email protected]>For future development I would suggest to rewrite/drop these magic numbers as same problem can be easily repeated in future.
Quoted 5 lines
The best solution would be to rewrite the driver to use
hwmon_device_register_with_info(), but that should be done by someone with access to the hardware.Guenter
Im currently doing exactly that, since i have an old dell notebook. But that might take some time.
Quoted 31 lines
Quoted 30 lines
Quoted 30 lines
Signed-off-by Armin Wolf <[email protected]>---
Tested on a Dell Latitude C600.
---
drivers/hwmon/dell-smm-hwmon.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)drivers/hwmon/dell-smm-hwmon.c +0
-0@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {static
umode_ti8k_is_visible(struct kobject *kobj, struct attribute *attr,
int index)
{
- if (disallow_fan_support&& index >= 8)
+ if (disallow_fan_support&& index >= 20) return 0;
if (disallow_fan_type_call&&- (index == 9 || index == 12 || index == 15)) + (index == 21 || index == 25 || index == 28))return 0;
if (index >= 0 && index <= 1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1)) --
2.20.1
Guenter Roeck
maintainerQuoted 28 lines · Armin Wolf
Quoted 27 lines · On 13.05.21 18:53 Guenter Roeck wrote:
Quoted 25 lines · Pali Rohár
Quoted 6 lines · On Thursday 13 May 2021 17:45:46 [email protected] wrote:
From: Armin Wolf <[email protected]>
When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls.
Fix those values.Do you mean this change, right?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1bb46a20e73b0bb3364cff3839c9f716ed327770Yes, it looks like that it should have been part of that change.
Therefore I suggest to add Fixes tag:
Fixes 1bb46a20e73b ("hwmon: (dell-smm) Support up to 10 temp sensors")Otherwise looks good!
Reviewed-by Pali Rohár <[email protected]>For future development I would suggest to rewrite/drop these magic numbers as same problem can be easily repeated in future.
Quoted 7 lines
Quoted 5 lines
The best solution would be to rewrite the driver to use
hwmon_device_register_with_info(), but that should be done by someone with access to the hardware.Guenter
Im currently doing exactly that, since i have an old dell notebook. But that might take some time.
Excellent, thanks!
Guenter
Quoted 32 lines
Quoted 31 lines
Quoted 30 lines
Quoted 30 lines
Signed-off-by Armin Wolf <[email protected]>---
Tested on a Dell Latitude C600.
---
drivers/hwmon/dell-smm-hwmon.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)drivers/hwmon/dell-smm-hwmon.c +0
-0@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {static
umode_ti8k_is_visible(struct kobject *kobj, struct attribute *attr,
int index)
{
- if (disallow_fan_support&& index >= 8)
+ if (disallow_fan_support&& index >= 20) return 0;
if (disallow_fan_type_call&&- (index == 9 || index == 12 || index == 15)) + (index == 21 || index == 25 || index == 28))return 0;
if (index >= 0 && index <= 1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1))Signature · 1 line
2.20.1
Pali Rohár
maintainerQuoted 28 lines · On Thursday 13 May 2021 20:41:06 Armin Wolf wrote:
Quoted 27 lines · On 13.05.21 18:53 Guenter Roeck wrote:
Quoted 25 lines · Pali Rohár
Quoted 6 lines · On Thursday 13 May 2021 17:45:46 [email protected] wrote:
From: Armin Wolf <[email protected]>
When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls.
Fix those values.Do you mean this change, right?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1bb46a20e73b0bb3364cff3839c9f716ed327770Yes, it looks like that it should have been part of that change.
Therefore I suggest to add Fixes tag:
Fixes 1bb46a20e73b ("hwmon: (dell-smm) Support up to 10 temp sensors")Otherwise looks good!
Reviewed-by Pali Rohár <[email protected]>For future development I would suggest to rewrite/drop these magic numbers as same problem can be easily repeated in future.
Quoted 7 lines
Quoted 5 lines
The best solution would be to rewrite the driver to use
hwmon_device_register_with_info(), but that should be done by someone with access to the hardware.Guenter
Im currently doing exactly that, since i have an old dell notebook. But that might take some time.
Perfect! Thank you for looking at this.
I think that this driver converged into state when it is used by more non-developer users on LTS -stable kernels as developers which use play with -rc kernels. So issues or breakages are detected sometimes after longer time.
Also I think that driver is basically feature-complete so I do not have reason for investing time in its development.
Currently I have only one Dell laptop and I'm not testing on it kernel patches as it is used for different daily work and also uses 4.19 LTS distribution kernel.
But when you send a patch which is larger and needs more testing, I have no problem to try compile it as module for current distribution kernel and exchange .ko module at runtime. And test if functionality works as expected.
Quoted 32 lines
Quoted 31 lines
Quoted 30 lines
Quoted 30 lines
Signed-off-by Armin Wolf <[email protected]>---
Tested on a Dell Latitude C600.
---
drivers/hwmon/dell-smm-hwmon.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)drivers/hwmon/dell-smm-hwmon.c +0
-0@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {static
umode_ti8k_is_visible(struct kobject *kobj, struct attribute *attr,
int index)
{
- if (disallow_fan_support&& index >= 8)
+ if (disallow_fan_support&& index >= 20) return 0;
if (disallow_fan_type_call&&- (index == 9 || index == 12 || index == 15)) + (index == 21 || index == 25 || index == 28))return 0;
if (index >= 0 && index <= 1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1)) --
2.20.1
Quoted 9 lines · On Thu, May 13, 2021 at 05:45:46PM +0200, [email protected] wrote:
From: Armin Wolf <[email protected]>
When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls.
Fix those values.Signed-off-by Armin Wolf <[email protected]>Reviewed-by Pali Rohár <[email protected]>
Applied, with added Fixes: tag.
Guenter
Quoted 26 lines
---
Tested on a Dell Latitude C600.--- drivers/hwmon/dell-smm-hwmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)--
2.20.1drivers/hwmon/dell-smm-hwmon.c +2
-2@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {static umode_t i8k_is_visible (struct kobject *kobj,struct attribute *attr,int index) { -if (disallow_fan_support && index >=8 ) +if (disallow_fan_support && index >=20 )return 0 ;if (disallow_fan_type_call && - (index ==9 || index ==12 || index ==15 )) + (index ==21 || index ==25 || index ==28 ))return 0 ;if (index >=0 && index <=1 && !(i8k_hwmon_flags &I8K_HWMON_HAVE_TEMP1 ))