ptrace: make ptrace() fail if the tracee changed its pid unexpectedly

From: Oleg Nesterov <[email protected]>

[ Upstream commit dbb5afad100a828c97e012c6106566d99f041db6 ]

Suppose we have 2 threads, the group-leader L and a sub-theread T, both parked in ptrace_stop(). Debugger tries to resume both threads and does

	ptrace(PTRACE_CONT, T);
	ptrace(PTRACE_CONT, L);

If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not resume the old leader L, it resumes the post-exec thread T which was actually now stopped in PTHREAD_EVENT_EXEC. In this case the PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the tracee changed its pid.

This patch makes ptrace() fail in this case until debugger does wait() and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.

The patch doesn't add the new PTRACE_ option to not complicate the API, and I _hope_ this won't cause any noticeable regression:

- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec and the tracer does a ptrace request without having consumed the exec event, it's 100% sure that the thread the ptracer thinks it is targeting does not exist anymore, or isn't the same as the one it thinks it is targeting.

- To some degree this patch adds nothing new. In the scenario above ptrace(L) can fail with -ESRCH if it is called after the execing sub-thread wakes the leader up and before it "steals" the leader's pid.

Test-case:

	#include <stdio.h>
	#include <unistd.h>
	#include <signal.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <errno.h>
	#include <pthread.h>
	#include <assert.h>

	void *tf(void *arg)
	{
		execve("/usr/bin/true", NULL, NULL);
		assert(0);

		return NULL;
	}

	int main(void)
	{
		int leader = fork();
		if (!leader) {
			kill(getpid(), SIGSTOP);

			pthread_t th;
			pthread_create(&th, NULL, tf, NULL);
			for (;;)
				pause();

			return 0;
		}

		waitpid(leader, NULL, WSTOPPED);

		ptrace(PTRACE_SEIZE, leader, 0,
				PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC);
		waitpid(leader, NULL, 0);

		ptrace(PTRACE_CONT, leader, 0,0);
		waitpid(leader, NULL, 0);

		int status, thread = waitpid(-1, &status, 0);
		assert(thread > 0 && thread != leader);
		assert(status == 0x80137f);

		ptrace(PTRACE_CONT, thread, 0,0);
		/*
		 * waitid() because waitpid(leader, &status, WNOWAIT) does not
		 * report status. Why ????
		 *
		 * Why WEXITED? because we have another kernel problem connected
		 * to mt-exec.
		 */
		siginfo_t info;
		assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0);
		assert(info.si_pid == leader && info.si_status == 0x0405);

		/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */
		assert(ptrace(PTRACE_CONT, leader, 0,0) == -1);
		assert(errno == ESRCH);

		assert(leader == waitpid(leader, &status, WNOHANG));
		assert(status == 0x04057f);

		assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);

		return 0;
	}

---
 kernel/ptrace.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

index ecdb7402072f..af74e843221b 100644
@@ -163,6 +163,21 @@ void __ptrace_unlink(struct task_struct *child)
 	spin_unlock(&child->sighand->siglock);
 }
 
+static bool looks_like_a_spurious_pid(struct task_struct *task)
+{
+	if (task->exit_code != ((PTRACE_EVENT_EXEC << 8) | SIGTRAP))
+		return false;
+
+	if (task_pid_vnr(task) == task->ptrace_message)
+		return false;
+	/*
+	 * The tracee changed its pid but the PTRACE_EVENT_EXEC event
+	 * was not wait()'ed, most probably debugger targets the old
+	 * leader which was destroyed in de_thread().
+	 */
+	return true;
+}
+
 /* Ensure that nothing can wake it up, even SIGKILL */
 static bool ptrace_freeze_traced(struct task_struct *task)
 {

@@ -173,7 +188,8 @@ static bool ptrace_freeze_traced(struct task_struct *task)
 		return ret;
 
 	spin_lock_irq(&task->sighand->siglock);
-	if (task_is_traced(task) && !__fatal_signal_pending(task)) {
+	if (task_is_traced(task) && !looks_like_a_spurious_pid(task) &&
+	    !__fatal_signal_pending(task)) {
 		task->state = __TASK_TRACED;
 		ret = true;
 	}

2.30.2

From: Daniel Wagner <[email protected]>

[ Upstream commit 85428beac80dbcace5b146b218697c73e367dcf5 ]

Reset the ns->file value to NULL also in the error case in nvmet_file_ns_enable().

The ns->file variable points either to file object or contains the error code after the filp_open() call. This can lead to following problem:

When the user first setups an invalid file backend and tries to enable the ns, it will fail. Then the user switches over to a bdev backend and enables successfully the ns. The first received I/O will crash the system because the IO backend is chosen based on the ns->file value:

static u16 nvmet_parse_io_cmd(struct nvmet_req *req)

{
	[...]

	if (req->ns->file)
		return nvmet_file_parse_io_cmd(req);

	return nvmet_bdev_parse_io_cmd(req);
}

---
 drivers/nvme/target/io-cmd-file.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

index 39d972e2595f..ad6263cf7303 100644
@@ -38,9 +38,11 @@ int nvmet_file_ns_enable(struct nvmet_ns *ns)
 
 	ns->file = filp_open(ns->device_path, flags, 0);
 	if (IS_ERR(ns->file)) {
-		pr_err("failed to open file %s: (%ld)\n",
-				ns->device_path, PTR_ERR(ns->file));
-		return PTR_ERR(ns->file);
+		ret = PTR_ERR(ns->file);
+		pr_err("failed to open file %s: (%d)\n",
+			ns->device_path, ret);
+		ns->file = NULL;
+		return ret;
 	}
 
 	ret = vfs_getattr(&ns->file->f_path,

2.30.2