yank: Unregister function when using TLS migration
PATCH 1/1 yank: Unregister function when using TLS migration
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm: ../util/yank.c:107: yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
This happens because of a missing yank_unregister_function() when using qio-channel-tls.
Fix this by also allowing TYPE_QIO_CHANNEL_TLS object type to perform yank_unregister_function() in channel_close() and multifd_load_cleanup().
--- migration/multifd.c | 5 +++-- migration/qemu-file-channel.c | 7 +++++++ 2 files changed, 10 insertions(+), 2 deletions(-)
migration/multifd.c +3 -2
@@ -987,8 +987,9 @@ int multifd_load_cleanup(Error **errp)for (i =0 ; i <migrate_multifd_channels (); i++) {MultiFDRecvParams *p = &multifd_recv_state->params[i]; -if (object_dynamic_cast (OBJECT (p->c),TYPE_QIO_CHANNEL_SOCKET ) - &&OBJECT (p->c)->ref ==1 ) { +if ((object_dynamic_cast (OBJECT (p->c),TYPE_QIO_CHANNEL_SOCKET ) || + (object_dynamic_cast (OBJECT (p->c),TYPE_QIO_CHANNEL_TLS ))) && +OBJECT (p->c)->ref ==1 ) {yank_unregister_function (MIGRATION_YANK_INSTANCE , migration_yank_iochannel,QIO_CHANNEL (p->c));
migration/qemu-file-channel.c +7 -0
@@ -26,6 +26,7 @@#include "qemu-file-channel.h" #include "qemu-file.h" #include "io/channel-socket.h" +#include "io/channel-tls.h" #include "qemu/iov.h" #include "qemu/yank.h" #include "yank_functions.h"
@@ -111,6 +112,12 @@ static int channel_close(void *opaque, Error **errp)yank_unregister_function (MIGRATION_YANK_INSTANCE , migration_yank_iochannel,QIO_CHANNEL (ioc)); + }else if (object_dynamic_cast (OBJECT (ioc),TYPE_QIO_CHANNEL_TLS ) + &&OBJECT (ioc)->ref ==1 ) { +QIOChannelTLS *tioc = opaque; +yank_unregister_function (MIGRATION_YANK_INSTANCE , + migration_yank_iochannel, +QIO_CHANNEL (tioc->master)); }object_unref (OBJECT (ioc));return ret;
Signature · 1 line
2.31.1
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.
Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>
Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with qio_channel_shutdown().
IIUC the confused thing here is we register only for qio-socket, however tls will actually call migration_channel_connect() twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?
Lukas, is there a reason?
Signature · 1 line
Peter Xu
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().
Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging. shutdown() for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
What do you think?
Regards,
Lukas Straub
Quoted 36 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Quoted 7 lines
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know ioc->master is the socket ioc of tls ioc to unregister.
Signature · 1 line
Peter Xu
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).
Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Conceptually we just want to yank out the socket channel and leave everything above that to just deal with the fallout of the terminated socket.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 50 lines · Daniel P. Berrangé
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.
Quoted 5 lines
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Could you elaborate what's the "cleanup shutdown"?
The yank calls migration_yank_iochannel:
void migration_yank_iochannel(void *opaque)
{
QIOChannel *ioc = QIO_CHANNEL(opaque);
qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
}Where qio_channel_shutdown for tls is nothing but delivers that to the master channel:
static int qio_channel_tls_shutdown(QIOChannel *ioc,
QIOChannelShutdown how, Error **errp)
{
QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc);
qatomic_or(&tioc->shutdown, how);
return qio_channel_shutdown(tioc->master, how, errp);
}So I thought it was a nice wrapper just for things like this, and I didn't see anything it does more than the io_shutdown for the socket channel. Did I miss something?
Thanks,
Signature · 1 line
Peter Xu
Quoted 82 lines · Peter Xu
Quoted 50 lines · Daniel P. Berrangé
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.Quoted 5 lines
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Could you elaborate what's the "cleanup shutdown"?
The yank calls
migration_yank_iochannel:void
migration_yank_iochannel(void *opaque){ QIOChannel *ioc = QIO_CHANNEL(opaque); qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL); }Where
qio_channel_shutdownfor tls is nothing but delivers that to the master channel:static int qio_channel_tls_shutdown(QIOChannel *ioc,
QIOChannelShutdown how, Error **errp){ QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc); qatomic_or(&tioc->shutdown, how); return qio_channel_shutdown(tioc->master, how, errp); }
Quoted 3 lines
So I thought it was a nice wrapper just for things like this, and I didn't see anything it does more than the
io_shutdownfor the socket channel. Did I miss something?
Today thats the case, but don't assume it will be the case forever. There is a mechanism in TLS for doing clean shutdown which we've debated including.
In general apps *can* just call the shutdown method on the QIOChannelTLS object no matter what. Yank is just a little bit special because of its need to be guaranteed to work even when the network is dead. So yank should always directly call the low level QIOChannelSocket, so thre is a strong guarantee it can't block on something.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 91 lines · Daniel P. Berrangé
Quoted 82 lines · Peter Xu
Quoted 50 lines · Daniel P. Berrangé
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.Quoted 5 lines
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Could you elaborate what's the "cleanup shutdown"?
The yank calls
migration_yank_iochannel:void
migration_yank_iochannel(void *opaque){ QIOChannel *ioc = QIO_CHANNEL(opaque); qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL); }Where
qio_channel_shutdownfor tls is nothing but delivers that to the master channel:static int qio_channel_tls_shutdown(QIOChannel *ioc,
QIOChannelShutdown how, Error **errp){ QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc); qatomic_or(&tioc->shutdown, how); return qio_channel_shutdown(tioc->master, how, errp); }Quoted 3 lines
So I thought it was a nice wrapper just for things like this, and I didn't see anything it does more than the
io_shutdownfor the socket channel. Did I miss something?Today thats the case, but don't assume it will be the case forever. There is a mechanism in TLS for doing clean shutdown which we've debated including.
Quoted 5 lines
In general apps *can* just call the shutdown method on the QIOChannelTLS object no matter what. Yank is just a little bit special because of its need to be guaranteed to work even when the network is dead. So yank should always directly call the low level QIOChannelSocket, so thre is a strong guarantee it can't block on something.
Hmm, I am still not fully convinced that that's a valid reason the migration code should be aware of how the socket is managed in tls channels...
Does that sound more like a good reason to introduce QIOChannelShutdown with QIO_CHANNEL_SHUTDOWN_FORCE so it'll always not block if FORCE set? Then we can switch the yank function to use that.
What do you think?
Signature · 1 line
Peter Xu
Quoted 98 lines · Peter Xu
Quoted 91 lines · Daniel P. Berrangé
Quoted 82 lines · Peter Xu
Quoted 50 lines · Daniel P. Berrangé
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.Quoted 5 lines
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Could you elaborate what's the "cleanup shutdown"?
The yank calls
migration_yank_iochannel:void
migration_yank_iochannel(void *opaque){ QIOChannel *ioc = QIO_CHANNEL(opaque); qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL); }Where
qio_channel_shutdownfor tls is nothing but delivers that to the master channel:static int qio_channel_tls_shutdown(QIOChannel *ioc,
QIOChannelShutdown how, Error **errp){ QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc); qatomic_or(&tioc->shutdown, how); return qio_channel_shutdown(tioc->master, how, errp); }Quoted 3 lines
So I thought it was a nice wrapper just for things like this, and I didn't see anything it does more than the
io_shutdownfor the socket channel. Did I miss something?Today thats the case, but don't assume it will be the case forever. There is a mechanism in TLS for doing clean shutdown which we've debated including.
Quoted 5 lines
In general apps *can* just call the shutdown method on the QIOChannelTLS object no matter what. Yank is just a little bit special because of its need to be guaranteed to work even when the network is dead. So yank should always directly call the low level QIOChannelSocket, so thre is a strong guarantee it can't block on something.
Quoted 8 lines
Hmm, I am still not fully convinced that that's a valid reason the migration code should be aware of how the socket is managed in tls channels...
Does that sound more like a good reason to introduce QIOChannelShutdown with
QIO_CHANNEL_SHUTDOWN_FORCEso it'll always not block if FORCE set? Then we can switch the yank function to use that.What do you think?
I think that's unneccessary - the migration code already does similar things elsewhere when it wants to distinguish TLS usage, so this is not anything new conceptually.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 106 lines · Daniel P. Berrangé
Quoted 105 lines · Peter Xu
Quoted 91 lines · Daniel P. Berrangé
Quoted 82 lines · Peter Xu
Quoted 50 lines · Daniel P. Berrangé
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.Quoted 5 lines
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Could you elaborate what's the "cleanup shutdown"?
The yank calls
migration_yank_iochannel:void
migration_yank_iochannel(void *opaque){ QIOChannel *ioc = QIO_CHANNEL(opaque); qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL); }Where
qio_channel_shutdownfor tls is nothing but delivers that to the master channel:static int qio_channel_tls_shutdown(QIOChannel *ioc,
QIOChannelShutdown how, Error **errp){ QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc); qatomic_or(&tioc->shutdown, how); return qio_channel_shutdown(tioc->master, how, errp); }Quoted 3 lines
So I thought it was a nice wrapper just for things like this, and I didn't see anything it does more than the
io_shutdownfor the socket channel. Did I miss something?Today thats the case, but don't assume it will be the case forever. There is a mechanism in TLS for doing clean shutdown which we've debated including.
Quoted 5 lines
In general apps *can* just call the shutdown method on the QIOChannelTLS object no matter what. Yank is just a little bit special because of its need to be guaranteed to work even when the network is dead. So yank should always directly call the low level QIOChannelSocket, so thre is a strong guarantee it can't block on something.
Hmm, I am still not fully convinced that that's a valid reason the migration code should be aware of how the socket is managed in tls channels...
Does that sound more like a good reason to introduce QIOChannelShutdown with
QIO_CHANNEL_SHUTDOWN_FORCEso it'll always not block if FORCE set? Then we can switch the yank function to use that.
Quoted 5 lines
Quoted 1 line
What do you think?
I think that's unneccessary - the migration code already does similar things elsewhere when it wants to distinguish TLS usage, so this is not anything new conceptually.
But IMHO the other option is to reduce tls difference and treat it the same as the other channels as much as possible.. probably starting from reworking the yank calls..
And IIUC it's not only about migration. E.g., all the existing yank functions are based on the fact that current channel shutdown() won't block as it's called in the QMP oob handler:
char_socket_yank_iochannel[409] qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
nbd_yank[1783] qio_channel_shutdown(QIO_CHANNEL(s->sioc), QIO_CHANNEL_SHUTDOWN_BOTH, NULL);
I have no idea whether they'll use tls or not, I don't see strictly on why they can't at least in the future... If tls starts to introduce shutdown() that can block, IMHO the cleaner solution is to separate the use of block/nonblock shutdown() because we do have scenarios that do not want shutdown() to block, by either introduce QIO_CHANNEL_SHUTDOWN_FORCE or QIO_CHANNEL_SHUTDOWN_FULL which guarantees full cleanup of the tls channel even slower.
We also have other call sites for channel shutdown()s besides yank, I didn't check but I feel like it's always good to provide non-blocking solutions when the caller wants, as it does look like a valid requirement as long as the change is trivial (IIUC it'll be a small patch and conditionally do either quick/slow version of shutdown for tls only).
Thanks,
Signature · 1 line
Peter Xu
Quoted 106 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 105 lines · Peter Xu
Quoted 91 lines · Daniel P. Berrangé
Quoted 82 lines · Peter Xu
Quoted 50 lines · Daniel P. Berrangé
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.Quoted 5 lines
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Could you elaborate what's the "cleanup shutdown"?
The yank calls
migration_yank_iochannel:void
migration_yank_iochannel(void *opaque){ QIOChannel *ioc = QIO_CHANNEL(opaque); qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL); }Where
qio_channel_shutdownfor tls is nothing but delivers that to the master channel:static int qio_channel_tls_shutdown(QIOChannel *ioc,
QIOChannelShutdown how, Error **errp){ QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc); qatomic_or(&tioc->shutdown, how); return qio_channel_shutdown(tioc->master, how, errp); }Quoted 3 lines
So I thought it was a nice wrapper just for things like this, and I didn't see anything it does more than the
io_shutdownfor the socket channel. Did I miss something?Today thats the case, but don't assume it will be the case forever. There is a mechanism in TLS for doing clean shutdown which we've debated including.
Quoted 5 lines
In general apps *can* just call the shutdown method on the QIOChannelTLS object no matter what. Yank is just a little bit special because of its need to be guaranteed to work even when the network is dead. So yank should always directly call the low level QIOChannelSocket, so thre is a strong guarantee it can't block on something.
Hmm, I am still not fully convinced that that's a valid reason the migration code should be aware of how the socket is managed in tls channels...
Does that sound more like a good reason to introduce QIOChannelShutdown with
QIO_CHANNEL_SHUTDOWN_FORCEso it'll always not block if FORCE set? Then we can switch the yank function to use that.
Quoted 5 lines
Quoted 1 line
What do you think?
I think that's unneccessary - the migration code already does similar things elsewhere when it wants to distinguish TLS usage, so this is not anything new conceptually.
I'd probably agree with Peter here that it would be preferential for the migration code not to know; what we want to do here is give the channel the opportunity to do a hard shutdown, and let the channel worry about it whether it can do that.
If you look at the nbd code, it's yank registration calls qio_channel_shutdown on whatever channel it happens to have; so that's probably wrong since I think you're saying that could block.
Dave
Quoted 6 lines
Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 83 lines · On Thu, 27 May 2021 13:37:42 +0100 Daniel P. Berrangé <[email protected]>…
Quoted 82 lines · Peter Xu
Quoted 50 lines · Daniel P. Berrangé
Quoted 42 lines · Peter Xu
Quoted 41 lines · Lukas Straub
Quoted 24 lines · On Wed, 26 May 2021 16:40:35 -0400 Peter Xu <[email protected]> wrote:
Quoted 9 lines · Leonardo Bras
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Quoted 6 lines
Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>Leo,
Thanks for looking into it!
So before looking int the fix... I do have a doubt on why we only enable yank on socket typed, as I think tls should also work with
qio_channel_shutdown().Quoted 8 lines
IIUC the confused thing here is we register only for qio-socket, however tls will actually call
migration_channel_connect()twice, first with a qio-socket, then with the real tls-socket. For tls I feel like we have registered with the wrong channel - instead of the wrapper socket ioc, we should register to the final tls ioc?Lukas, is there a reason?
Hi,
There is no specific reason. Both ways work equally well in preventing qemu from hanging.shutdown()for tls-channel just makes it abort a little sooner (by not attempting to encrypt and send data anymore).Quoted 6 lines
Quoted 2 lines
I don't lean either way. I guess registering it on the tls-channel makes is a bit more explicit and clearer.
Agreed, because IMHO logically the migration code should not be aware of internals of IOChannels, e.g., we shouldn't need to know
ioc->masteris the socket ioc of tls ioc to unregister.Quoted 5 lines
I think it is atually better to ignore the TLS channel and *always* yank on the undering socket IO channel. The yank functionality is intended to be used in a scenario where we know the channels are broken. If yank calls the high level IO channel it is potentially going to try to do a cleanup shutdown that we know will fail because of the broken network.
Could you elaborate what's the "cleanup shutdown"?
The yank calls
migration_yank_iochannel:void
migration_yank_iochannel(void *opaque){ QIOChannel *ioc = QIO_CHANNEL(opaque); qio_channel_shutdown(ioc, QIO_CHANNEL_SHUTDOWN_BOTH, NULL); }Where
qio_channel_shutdownfor tls is nothing but delivers that to the master channel:static int qio_channel_tls_shutdown(QIOChannel *ioc,
QIOChannelShutdown how, Error **errp){ QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc); qatomic_or(&tioc->shutdown, how); return qio_channel_shutdown(tioc->master, how, errp); }
Quoted 7 lines
Quoted 3 lines
So I thought it was a nice wrapper just for things like this, and I didn't see anything it does more than the
io_shutdownfor the socket channel. Did I miss something?Today thats the case, but don't assume it will be the case forever. There is a mechanism in TLS for doing clean shutdown which we've debated including.
Actually, the requirements of io_shutdown where tightened with the introduction of the yank feature (commit 8659f317d) and it now reads:
/**
* qio_channel_shutdown:
* ...
* This function is thread-safe, terminates quickly and does not block.
* ...
*/
And it should probably be further tightened with something like :
"With SHUTDOWN_BOTH all in-flight read()/write() operations on the io object will be canceled immediately"
Since from a quick look, at least nbd (nbd_teardown_connection()), migrate (migrate_fd_cancel()) and yank of course expect that.
Quoted 9 lines
In general apps *can* just call the shutdown method on the QIOChannelTLS object no matter what. Yank is just a little bit special because of its need to be guaranteed to work even when the network is dead. So yank should always directly call the low level QIOChannelSocket, so thre is a strong guarantee it can't block on something.
Regards,
Daniel
Quoted 26 lines · On Wed, 26 May 2021 17:05:40 -0300 Leonardo Bras <[email protected]> wrote:
After yank feature was introduced, whenever migration is started using TLS, the following error happens in both source and destination hosts:
(qemu) qemu-kvm:
../util/yank.c:107:yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.This happens because of a missing
yank_unregister_function()when using qio-channel-tls.Fix this by also allowing
TYPE_QIO_CHANNEL_TLSobject type to performyank_unregister_function()inchannel_close()andmultifd_load_cleanup().Fixes 50186051f ("Introduce yank feature")Signed-off-by Leonardo Bras <[email protected]>--- migration/multifd.c | 5 +++-- migration/qemu-file-channel.c | 7 +++++++ 2 files changed, 10 insertions(+), 2 deletions(-)migration/multifd.c +0
-0@@ -987,8 +987,9 @@ int multifd_load_cleanup(Error **errp)for (i =0 ; i <migrate_multifd_channels (); i++) {
migration/multifd.c int multifd_load_cleanup(Error **errp) · line 995
Quoted 10 lines
migration/multifd.c +3
-2MultiFDRecvParams *p = &multifd_recv_state->params[i]; -if (object_dynamic_cast (OBJECT (p->c),TYPE_QIO_CHANNEL_SOCKET ) - &&OBJECT (p->c)->ref ==1 ) { +if ((object_dynamic_cast (OBJECT (p->c),TYPE_QIO_CHANNEL_SOCKET ) || + (object_dynamic_cast (OBJECT (p->c),TYPE_QIO_CHANNEL_TLS ))) && +OBJECT (p->c)->ref ==1 ) {yank_unregister_function (MIGRATION_YANK_INSTANCE , migration_yank_iochannel,QIO_CHANNEL (p->c));
The code here should be the same as in channel_close. So for the tls-channel you have to unregister with QIO_CHANNEL(tioc->master) like below.
Regards,
Lukas Straub
Quoted 25 lines
migration/qemu-file-channel.c +7
-0@@ -26,6 +26,7 @@#include "qemu-file-channel.h" #include "qemu-file.h" #include "io/channel-socket.h" +#include "io/channel-tls.h" #include "qemu/iov.h" #include "qemu/yank.h" #include "yank_functions.h" @@ -111,6 +112,12 @@ static int channel_close(void *opaque, Error **errp)yank_unregister_function (MIGRATION_YANK_INSTANCE , migration_yank_iochannel,QIO_CHANNEL (ioc)); + }else if (object_dynamic_cast (OBJECT (ioc),TYPE_QIO_CHANNEL_TLS ) + &&OBJECT (ioc)->ref ==1 ) { +QIOChannelTLS *tioc = opaque; +yank_unregister_function (MIGRATION_YANK_INSTANCE , + migration_yank_iochannel, +QIO_CHANNEL (tioc->master)); }object_unref (OBJECT (ioc));return ret;
Hello Lukas, thanks for this feedback!
Quoted 16 lines · Lukas Straub
Quoted 16 lines
migration/multifd.c +0
-0@@ -987,8 +987,9 @@ int multifd_load_cleanup(Error **errp) for (i = 0; i < migrate_multifd_channels(); i++) { MultiFDRecvParams *p = &multifd_recv_state->params[i];
- if (object_dynamic_cast(OBJECT(p->c),TYPE_QIO_CHANNEL_SOCKET)
- && OBJECT(p->c)->ref == 1) {
+ if ((object_dynamic_cast(OBJECT(p->c),TYPE_QIO_CHANNEL_SOCKET) ||
+ (object_dynamic_cast(OBJECT(p->c),
TYPE_QIO_CHANNEL_TLS))) &&
+ OBJECT(p->c)->ref == 1) {
Quoted 8 lines
Quoted 3 lines
yank_unregister_function(MIGRATION_YANK_INSTANCE, migration_yank_iochannel, QIO_CHANNEL(p->c));The code here should be the same as in
channel_close. So for the tls-channel you have to unregister withQIO_CHANNEL(tioc->master)like
below.
ok, sure, I will send a v2.
Thanks!
Quoted 3 lines
Regards,
Lukas Straub