mx7d: Add Storopack's SMEGW01 board
Subsystems (3)
PATCH 1/1 mx7d: Add Storopack's SMEGW01 board
Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC.
Based on the original U-Boot work done by Phytec.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/dts/Makefile | 4 +- arch/arm/dts/imx7d-smegw01.dts | 190 +++++++++++++++++++++++++++ arch/arm/mach-imx/mx7/Kconfig | 9 ++ board/storopack/smegw01/Kconfig | 12 ++ board/storopack/smegw01/MAINTAINERS | 8 ++ board/storopack/smegw01/Makefile | 4 + board/storopack/smegw01/imximage.cfg | 100 ++++++++++++++ board/storopack/smegw01/smegw01.c | 95 ++++++++++++++ configs/smegw01_defconfig | 63 +++++++++ include/configs/smegw01.h | 63 +++++++++ 10 files changed, 546 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/imx7d-smegw01.dts create mode 100644 board/storopack/smegw01/Kconfig create mode 100644 board/storopack/smegw01/MAINTAINERS create mode 100644 board/storopack/smegw01/Makefile create mode 100644 board/storopack/smegw01/imximage.cfg create mode 100644 board/storopack/smegw01/smegw01.c create mode 100644 configs/smegw01_defconfig create mode 100644 include/configs/smegw01.h
arch/arm/dts/Makefile +2 -2
@@ -817,8 +817,8 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7s-warp.dtb \ imx7d-meerkat96.dtb \ imx7d-pico-pi.dtb \ - imx7d-pico-hobbit.dtb - + imx7d-pico-hobbit.dtb \ + imx7d-smegw01.dtb dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \ imx7ulp-evk.dtb
arch/arm/dts/imx7d-smegw01.dts new file +190 -0
190 lines not on this page · raw message
arch/arm/mach-imx/mx7/Kconfig +9 -0
@@ -70,6 +70,14 @@ config TARGET_PICO_IMX7D select SUPPORT_SPL imply CMD_DM +config TARGET_SMEGW01 + bool "smegw01" + select BOARD_LATE_INIT + select DM + select DM_THERMAL + select MX7D + imply CMD_DM + config TARGET_WARP7 bool "warp7" select BOARD_LATE_INIT
@@ -94,6 +102,7 @@ source "board/compulab/cl-som-imx7/Kconfig" source "board/ronetix/imx7-cm/Kconfig" source "board/freescale/mx7dsabresd/Kconfig" source "board/novtech/meerkat96/Kconfig" +source "board/storopack/smegw01/Kconfig" source "board/technexion/pico-imx7d/Kconfig" source "board/toradex/colibri_imx7/Kconfig" source "board/warp7/Kconfig"
board/storopack/smegw01/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_SMEGW01 + +config SYS_BOARD + default "smegw01" + +config SYS_VENDOR + default "storopack" + +config SYS_CONFIG_NAME + default "smegw01" + +endif
board/storopack/smegw01/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SMEGW01 BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/storopack/ +F: arch/arm/dts/imx7d-smegw01.dts +F: configs/smegw01_defconfig +F: include/configs/smegw01.h
board/storopack/smegw01/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2016 NXP Semiconductors + +obj-y := smegw01.o
board/storopack/smegw01/imximage.cfg new file +100 -0
100 lines not on this page · raw message
board/storopack/smegw01/smegw01.c new file +95 -0
95 lines not on this page · raw message
configs/smegw01_defconfig new file +63 -0
63 lines not on this page · raw message
include/configs/smegw01.h new file +63 -0
63 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 1/1 mx7d: Add Storopack's SMEGW01 board
Quoted 4 lines
Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC.
Based on the original U-Boot work done by Phytec.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================