Skip to contentSkip to conversation

Cache modelling TCG plugin

RFC PATCH Superseded Mahmoud Mandour 3 participants 8 messages May 29, 2021 – Jun 2, 2021

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover Cache modelling TCG plugin

In this RFC patch series, I propose an initial cache modelling TCG plugin. As of now, it models separate L1 data cache and L1 instruction cache. It supports three eviction policies: LRU, random, and FIFO. Once a policy is chosen, it's used for both instruction and data caches.

Mahmoud Mandour (3):
plugins: Added a new cache modelling plugin
plugins: cache: Enabled parameterization and added trace printing
plugins: cache: Added FIFO and LRU eviction policies.

 contrib/plugins/Makefile |   1 +
 contrib/plugins/cache.c  | 595 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 596 insertions(+)
 create mode 100644 contrib/plugins/cache.c
Signature · 1 line
2.25.1
#1 lore raw

RFC PATCH 1/3 plugins: Added a new cache modelling plugin

Added a cache modelling plugin that uses a static configuration used in many of the commercial microprocessors and uses random eviction policy.

---
 contrib/plugins/Makefile |   1 +
 contrib/plugins/cache.c  | 398 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 399 insertions(+)
 create mode 100644 contrib/plugins/cache.c
contrib/plugins/Makefile +1 -0
index b9d7935e5e..2237b47f8b 100644
@@ -18,6 +18,7 @@ NAMES += hotpages
 NAMES += howvec
 NAMES += lockstep
 NAMES += hwprofile
+NAMES += cache
 
 SONAMES := $(addsuffix .so,$(addprefix lib,$(NAMES)))
 
contrib/plugins/cache.c new file +398 -0

398 lines not on this page · raw message

Signature · 1 line
2.25.1
#2 lore raw

Re: [RFC PATCH 1/3] plugins: Added a new cache modelling plugin

Quoted 65 lines · Mahmoud Mandour

Added a cache modelling plugin that uses a static configuration used in many of the commercial microprocessors and uses random eviction policy.

---
 contrib/plugins/Makefile |   1 +
 contrib/plugins/cache.c  | 398 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 399 insertions(+)
 create mode 100644 contrib/plugins/cache.c
contrib/plugins/Makefile +1 -0
index b9d7935e5e..2237b47f8b 100644
@@ -18,6 +18,7 @@ NAMES += hotpages
 NAMES += howvec
 NAMES += lockstep
 NAMES += hwprofile
+NAMES += cache
 
 SONAMES := $(addsuffix .so,$(addprefix lib,$(NAMES)))
 
contrib/plugins/cache.c new file +37 -0
new file mode 100644
index 0000000000..f8c15ebed2
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2021, Mahmoud Mandour <[email protected]>
+ *
+ * License: GNU GPL, version 2 or later.
+ *   See the COPYING file in the top-level directory.
+ */
+
+#include <inttypes.h>
+#include <assert.h>
+#include <stdlib.h>
+#include <inttypes.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <glib.h>
+
+#include <qemu-plugin.h>
+
+QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION;
+
+static GRand *rng;
+static GHashTable *dmiss_ht;
+static GHashTable *imiss_ht;
+
+static GMutex dmtx, imtx;
+
+static int limit;
+static bool sys;
+
+static uint64_t dmem_accesses;
+static uint64_t dmisses;
+
+static uint64_t imem_accesses;
+static uint64_t imisses;
+
+static enum qemu_plugin_mem_rw rw = QEMU_PLUGIN_MEM_RW;
+

contrib/plugins/cache.c line 47

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+enum AccessResult {
+    HIT = 0,
+    MISS = 1
+};
+
+struct InsnData {
+    char *disas_str;
+    uint64_t addr;
+    uint64_t misses;
+};

A little commentary to the relationship between CacheSet and CacheBlock would be useful here for those trying to follow the code. Maybe a little ascii art if your up to it?

Quoted 24 lines
contrib/plugins/cache.c new file +24 -0
+
+struct CacheBlock {
+    uint64_t tag;
+    bool valid;
+};
+
+struct CacheSet {
+    struct CacheBlock *blocks;
+};
+
+struct Cache {
+    struct CacheSet *sets;
+    int num_sets;
+
+    int cachesize;
+    int blksize;
+    int assoc;
+
+    uint64_t blk_mask;
+    uint64_t set_mask;
+    uint64_t tag_mask;
+};
+
+struct Cache *dcache, *icache;

contrib/plugins/cache.c line 81

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+
+static int pow_of_two(int num)
+{
+    g_assert((num & (num - 1)) == 0);
+    int ret = 0;
+    while (num /= 2) {
+        ret++;
+    }
+    return ret;
+}

You could probably eliminate this by:

a) pre-calculating masks and shifts at start-up
b) expressing cache-size as a power of 2 (are caches ever not?)

Currently it is by far the biggest hit on the CPU:

  46.42%  qemu-aarch64  libcache.so              [.] pow_of_two
  16.71%  qemu-aarch64  libcache.so              [.] lru_update_on_hit
  14.12%  qemu-aarch64  libcache.so              [.] in_cache
   6.73%  qemu-aarch64  libcache.so              [.] extract_tag
   4.52%  qemu-aarch64  libcache.so              [.] extract_set
   4.48%  qemu-aarch64  libcache.so              [.] access_cache
   2.34%  qemu-aarch64  libcache.so              [.] vcpu_insn_exec
   1.63%  qemu-aarch64  libcache.so              [.] vcpu_mem_access
   0.72%  qemu-aarch64  libglib-2.0.so.0.5800.3  [.] g_mutex_lock

contrib/plugins/cache.c line 92

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+static inline uint64_t extract_tag(struct Cache *cache, uint64_t addr)
+{
+    return (addr & cache->tag_mask) >>
+        (pow_of_two(cache->num_sets) + pow_of_two(cache->blksize));
+}
+
+static inline uint64_t extract_set(struct Cache *cache, uint64_t addr)
+{
+    return (addr & cache->set_mask) >> (pow_of_two(cache->blksize));
+}

It would make sense to enforce pow_of_two for num_sets and blksize on initialisation to avoid doing it for every tag. Maybe rename them to set_shift and blksize_shift to better indicate their usage.

Quoted 63 lines
contrib/plugins/cache.c new file +63 -0
+
+static struct Cache *cache_init(int blksize, int assoc, int cachesize)
+{
+    struct Cache *cache;
+    int i;
+
+    cache = g_new(struct Cache, 1);
+    cache->blksize = blksize;
+    cache->assoc = assoc;
+    cache->cachesize = cachesize;
+    cache->num_sets = cachesize / (blksize * assoc);
+    cache->sets = g_new(struct CacheSet, cache->num_sets);
+
+    for (i = 0; i < cache->num_sets; i++) {
+        cache->sets[i].blocks = g_new0(struct CacheBlock, assoc);
+    }
+
+    cache->blk_mask = blksize - 1;
+    cache->set_mask = ((cache->num_sets - 1) << (pow_of_two(cache->blksize)));
+    cache->tag_mask = ~(cache->set_mask | cache->blk_mask);
+
+    return cache;
+}
+
+static int get_invalid_block(struct Cache *cache, uint64_t set)
+{
+    int i;
+
+    for (i = 0; i < cache->assoc; i++) {
+        if (!cache->sets[set].blocks[i].valid) {
+            /* conflict miss */
+            return i;
+        }
+    }
+
+    /* compulsary miss */
+    return -1;
+}
+
+static int get_replaced_block(struct Cache *cache)
+{
+    return g_rand_int_range(rng, 0, cache->assoc);
+}
+
+static bool in_cache(struct Cache *cache, uint64_t addr)
+{
+    int i;
+    uint64_t tag, set;
+
+    tag = extract_tag(cache, addr);
+    set = extract_set(cache, addr);
+
+    for (i = 0; i < cache->assoc; i++) {
+        if (cache->sets[set].blocks[i].tag == tag &&
+                cache->sets[set].blocks[i].valid) {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+static enum AccessResult access_cache(struct Cache *cache, uint64_t
Quoted 1 line

addr)

Does the enum really make things easier compared to a straight bool? You could just explain things with a comment:

/**
* access_cache() - simulate a cache access
* @cache: reference to the cache being used
* @addr: address of cached entity
*
* Returns true if the cache hit, false otherwise and the cache is
* updated for next time.
*/
static bool access_cache(struct Cache *cache, uint64_t addr) {

And then have:

  if (!access_cache(icache, addr)) {
      struct InsnData *insn = get_or_create(imiss_ht, userdata, addr);
      insn->misses++;
      imisses++;
  }
Quoted 85 lines
contrib/plugins/cache.c new file +85 -0
+{
+    uint64_t tag, set;
+    int replaced_blk;
+
+    if (in_cache(cache, addr)) {
+        return HIT;
+    }
+
+    tag = extract_tag(cache, addr);
+    set = extract_set(cache, addr);
+
+    replaced_blk = get_invalid_block(cache, set);
+
+    if (replaced_blk == -1) {
+        replaced_blk = get_replaced_block(cache);
+    }
+
+    cache->sets[set].blocks[replaced_blk].tag = tag;
+    cache->sets[set].blocks[replaced_blk].valid = true;
+
+    return MISS;
+}
+
+struct InsnData *get_or_create(GHashTable *ht, struct InsnData *insn_data,
+                               uint64_t addr)
+{
+    struct InsnData *insn = g_hash_table_lookup(ht, GUINT_TO_POINTER(addr));
+    if (!insn) {
+        g_hash_table_insert(ht, GUINT_TO_POINTER(addr), (gpointer) insn_data);
+        insn = insn_data;
+    }
+
+    return insn;
+}
+
+static void vcpu_mem_access(unsigned int cpu_index, qemu_plugin_meminfo_t info,
+                            uint64_t vaddr, void *userdata)
+{
+    uint64_t insn_addr;
+    uint64_t effective_addr;
+    struct qemu_plugin_hwaddr *hwaddr;
+
+    g_mutex_lock(&dmtx);
+    hwaddr = qemu_plugin_get_hwaddr(info, vaddr);
+    if (hwaddr && qemu_plugin_hwaddr_is_io(hwaddr)) {
+        g_free(userdata);
+        return;
+    }
+
+    insn_addr = ((struct InsnData *) userdata)->addr;
+    effective_addr = hwaddr ? qemu_plugin_hwaddr_phys_addr(hwaddr) : vaddr;
+
+    if (access_cache(dcache, effective_addr) == MISS) {
+        struct InsnData *insn = get_or_create(dmiss_ht, userdata, insn_addr);
+        insn->misses++;
+        dmisses++;
+    }
+    dmem_accesses++;
+    g_mutex_unlock(&dmtx);
+}
+
+static void vcpu_insn_exec(unsigned int vcpu_index, void *userdata)
+{
+    uint64_t addr;
+
+    g_mutex_lock(&imtx);
+    addr = ((struct InsnData *) userdata)->addr;
+
+    if (access_cache(icache, addr) == MISS) {
+        struct InsnData *insn = get_or_create(imiss_ht, userdata, addr);
+        insn->misses++;
+        imisses++;
+    }
+    imem_accesses++;
+    g_mutex_unlock(&imtx);
+}
+
+static void vcpu_tb_trans(qemu_plugin_id_t id, struct qemu_plugin_tb *tb)
+{
+    size_t n_insns;
+    size_t i;
+
+    n_insns = qemu_plugin_tb_n_insns(tb);
+    for (i = 0; i < n_insns; i++) {
+        struct qemu_plugin_insn *insn = qemu_plugin_tb_get_insn(tb, i);

contrib/plugins/cache.c line 250

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+        uint64_t effective_addr;
+
+        if (sys) {
+            effective_addr = (uint64_t) qemu_plugin_insn_haddr(insn);
+        } else {
+            effective_addr = (uint64_t) qemu_plugin_insn_vaddr(insn);
+        }
+
+        struct InsnData *ddata = g_new(struct InsnData, 1);
+        struct InsnData *idata = g_new(struct InsnData, 1);

OK I think I see what you where saying on the sync up earlier. You need to take into account any given instruction may get translated multiple times so I think for any given instruction you are tracking you want to get or create an entry here.

contrib/plugins/cache.c line 258

Quoted 8 lines
contrib/plugins/cache.c new file +8 -0
+
+        ddata->disas_str = qemu_plugin_insn_disas(insn);
+        ddata->misses = 0;
+        ddata->addr = effective_addr;
+
+        idata->disas_str = g_strdup(ddata->disas_str);
+        idata->misses = 0;
+        idata->addr = effective_addr;

And you might as well combine the InsnData to track both data and icache misses in one structure to avoid the duplication of records and strings.

Quoted 6 lines
contrib/plugins/cache.c new file +6 -0
+
+        qemu_plugin_register_vcpu_mem_cb(insn, vcpu_mem_access,
+                                         QEMU_PLUGIN_CB_NO_REGS,
+                                         rw, ddata);
+
+        qemu_plugin_register_vcpu_insn_exec_cb(insn, vcpu_insn_exec,

contrib/plugins/cache.c line 274

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+                                               QEMU_PLUGIN_CB_NO_REGS, idata);
+    }
+}
+
+static void print_entry(gpointer data)
+{
+    struct InsnData *insn = (struct InsnData *) data;
+    g_autoptr(GString) xx = g_string_new("");
+    g_string_append_printf(xx, "0x%" PRIx64 ": %s - misses: %lu\n",
+            insn->addr, insn->disas_str, insn->misses);

As you are likely going to want to post-process this data I would suggest a slightly more machine readable format:

address, misses, instruction
0x419298, 2, mov x0, x21
0x41aa40, 2, add x0, x0, #0x17

  0x419640, 2,  add x5, x4, #0x218
  0x41aa10, 2,  adrp x1, #0x48b000
  0x4002d0, 2,  adrp x16, #0x48b000
Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+    qemu_plugin_outs(xx->str);
+}
+
+static void free_insn(gpointer data)
+{
+    struct InsnData *insn = (struct InsnData *) data;
+    g_free(insn->disas_str);
+    g_free(insn);
+}
+

contrib/plugins/cache.c line 294

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+static void free_cache(struct Cache *cache)
+{
+    for (int i = 0; i < cache->num_sets; i++) {
+        g_free(cache->sets[i].blocks);
+    }
+
+    g_free(cache->sets);
+}
+
+static int cmp(gconstpointer a, gconstpointer b)

This will likely need renaming if you ever want to sort by different things.

Quoted 104 lines
contrib/plugins/cache.c new file +104 -0
+{
+    struct InsnData *insn_a = (struct InsnData *) a;
+    struct InsnData *insn_b = (struct InsnData *) b;
+
+    return insn_a->misses < insn_b->misses ? 1 : -1;
+}
+
+static void print_stats()
+{
+    g_autoptr(GString) rep = g_string_new("");
+    g_string_append_printf(rep,
+            "Data accesses: %lu, Misses: %lu\nMiss rate: %lf%%\n\n",
+            dmem_accesses,
+            dmisses,
+            ((double)dmisses / dmem_accesses) * 100.0);
+
+    g_string_append_printf(rep,
+            "Instruction accesses: %lu, Misses: %lu\nMiss rate: %lf%%\n\n",
+            imem_accesses,
+            imisses,
+            ((double)imisses / imem_accesses) * 100.0);
+
+    qemu_plugin_outs(rep->str);
+}
+
+static void plugin_exit()
+{
+    GList *curr;
+    int i;
+
+    g_mutex_lock(&imtx);
+    g_mutex_lock(&dmtx);
+    GList *dmiss_insns = g_hash_table_get_values(dmiss_ht);
+    GList *imiss_insns = g_hash_table_get_values(imiss_ht);
+    dmiss_insns = g_list_sort(dmiss_insns, cmp);
+    imiss_insns = g_list_sort(imiss_insns, cmp);
+
+    print_stats();
+
+    qemu_plugin_outs("Most data-missing instructions\n");
+    for (curr = dmiss_insns, i = 0; curr && i < limit; i++, curr = curr->next) {
+        print_entry(curr->data);
+    }
+
+    qemu_plugin_outs("\nMost fetch-missing instructions\n");
+    for (curr = imiss_insns, i = 0; curr && i < limit; i++, curr = curr->next) {
+        print_entry(curr->data);
+    }
+
+    free_cache(dcache);
+    free_cache(icache);
+
+    g_list_free(dmiss_insns);
+    g_list_free(imiss_insns);
+
+    g_hash_table_destroy(dmiss_ht);
+    g_hash_table_destroy(imiss_ht);
+
+    g_mutex_unlock(&dmtx);
+    g_mutex_unlock(&imtx);
+}
+
+QEMU_PLUGIN_EXPORT
+int qemu_plugin_install(qemu_plugin_id_t id, const qemu_info_t *info,
+                        int argc, char **argv)
+{
+    int i;
+    int iassoc, iblksize, icachesize;
+    int dassoc, dblksize, dcachesize;
+
+    limit = 32;
+    sys = info->system_emulation;
+
+    dassoc = 8;
+    dblksize = 64;
+    dcachesize = dblksize * dassoc * 32;
+
+    iassoc = 8;
+    iblksize = 64;
+    icachesize = iblksize * iassoc * 32;
+
+    rng = g_rand_new();
+
+    for (i = 0; i < argc; i++) {
+        char *opt = argv[i];
+        if (g_str_has_prefix(opt, "limit=")) {
+            limit = g_ascii_strtoull(opt + 6, NULL, 10);
+        } else {
+            fprintf(stderr, "option parsing failed: %s\n", opt);
+            return -1;
+        }
+    }
+
+    dcache = cache_init(dblksize, dassoc, dcachesize);
+    icache = cache_init(iblksize, iassoc, icachesize);
+
+    qemu_plugin_register_vcpu_tb_trans_cb(id, vcpu_tb_trans);
+    qemu_plugin_register_atexit_cb(id, plugin_exit, NULL);
+
+    dmiss_ht = g_hash_table_new_full(NULL, g_direct_equal, NULL, free_insn);
+    imiss_ht = g_hash_table_new_full(NULL, g_direct_equal, NULL, free_insn);
+
+    return 0;
+}
Signature · 1 line
Alex Bennée
author Applied
#3 lore raw

Re: [RFC PATCH 1/3] plugins: Added a new cache modelling plugin

Quoted 150 lines · Alex Bennée
Quoted 65 lines · Mahmoud Mandour

Added a cache modelling plugin that uses a static configuration used in many of the commercial microprocessors and uses random eviction policy.

---
 contrib/plugins/Makefile |   1 +
 contrib/plugins/cache.c  | 398 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 399 insertions(+)
 create mode 100644 contrib/plugins/cache.c
contrib/plugins/Makefile +1 -0
index b9d7935e5e..2237b47f8b 100644
@@ -18,6 +18,7 @@ NAMES += hotpages
 NAMES += howvec
 NAMES += lockstep
 NAMES += hwprofile
+NAMES += cache
 
 SONAMES := $(addsuffix .so,$(addprefix lib,$(NAMES)))
 
contrib/plugins/cache.c new file +37 -0
new file mode 100644
index 0000000000..f8c15ebed2
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2021, Mahmoud Mandour <[email protected]>
+ *
+ * License: GNU GPL, version 2 or later.
+ *   See the COPYING file in the top-level directory.
+ */
+
+#include <inttypes.h>
+#include <assert.h>
+#include <stdlib.h>
+#include <inttypes.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <glib.h>
+
+#include <qemu-plugin.h>
+
+QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION;
+
+static GRand *rng;
+static GHashTable *dmiss_ht;
+static GHashTable *imiss_ht;
+
+static GMutex dmtx, imtx;
+
+static int limit;
+static bool sys;
+
+static uint64_t dmem_accesses;
+static uint64_t dmisses;
+
+static uint64_t imem_accesses;
+static uint64_t imisses;
+
+static enum qemu_plugin_mem_rw rw = QEMU_PLUGIN_MEM_RW;
+

contrib/plugins/cache.c line 47

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+enum AccessResult {
+    HIT = 0,
+    MISS = 1
+};
+
+struct InsnData {
+    char *disas_str;
+    uint64_t addr;
+    uint64_t misses;
+};

A little commentary to the relationship between CacheSet and CacheBlock would be useful here for those trying to follow the code. Maybe a little ascii art if your up to it?

Quoted 24 lines
contrib/plugins/cache.c new file +24 -0
+
+struct CacheBlock {
+    uint64_t tag;
+    bool valid;
+};
+
+struct CacheSet {
+    struct CacheBlock *blocks;
+};
+
+struct Cache {
+    struct CacheSet *sets;
+    int num_sets;
+
+    int cachesize;
+    int blksize;
+    int assoc;
+
+    uint64_t blk_mask;
+    uint64_t set_mask;
+    uint64_t tag_mask;
+};
+
+struct Cache *dcache, *icache;

contrib/plugins/cache.c line 81

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+
+static int pow_of_two(int num)
+{
+    g_assert((num & (num - 1)) == 0);
+    int ret = 0;
+    while (num /= 2) {
+        ret++;
+    }
+    return ret;
+}

You could probably eliminate this by:

a) pre-calculating masks and shifts at start-up
b) expressing cache-size as a power of 2 (are caches ever not?)

Currently it is by far the biggest hit on the CPU:

  46.42%  qemu-aarch64  libcache.so              [.] pow_of_two
  16.71%  qemu-aarch64  libcache.so              [.] lru_update_on_hit
  14.12%  qemu-aarch64  libcache.so              [.] in_cache
   6.73%  qemu-aarch64  libcache.so              [.] extract_tag
   4.52%  qemu-aarch64  libcache.so              [.] extract_set
   4.48%  qemu-aarch64  libcache.so              [.] access_cache
   2.34%  qemu-aarch64  libcache.so              [.] vcpu_insn_exec
   1.63%  qemu-aarch64  libcache.so              [.] vcpu_mem_access
   0.72%  qemu-aarch64  libglib-2.0.so.0.5800.3  [.] g_mutex_lock

contrib/plugins/cache.c line 92

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+static inline uint64_t extract_tag(struct Cache *cache, uint64_t addr)
+{
+    return (addr & cache->tag_mask) >>
+        (pow_of_two(cache->num_sets) + pow_of_two(cache->blksize));
+}
+
+static inline uint64_t extract_set(struct Cache *cache, uint64_t addr)
+{
+    return (addr & cache->set_mask) >> (pow_of_two(cache->blksize));
+}

It would make sense to enforce pow_of_two for num_sets and blksize on initialisation to avoid doing it for every tag. Maybe rename them to set_shift and blksize_shift to better indicate their usage.

Quoted 1 line

That's of course problematic, I guess I need to precompute it once

for each cache and not for each tag extraction. However, I think that I got this
wrong since I do not even need to shift down the tag. I can extract the tag as
the high-order bits by only masking for every access and also store that in the
cache, which works fine. pow_of_two would still propose a problem since I need to compute it for extract_set, so I can store that once in the cache, yes.

Also, can you please tell me what do you use to access plugin profiling data? To my
knowledge, gprof is not able to work out profiling data for loaded shared libraries.
I tried sprof but I'm getting an error caused by a seemingly-known bug since 2009
and not yet solved :D

I guess callgrind works but I think its output is not as clean as the output you posted.

Quoted 80 lines
Quoted 9 lines
contrib/plugins/cache.c new file +9 -0
+
+static struct Cache *cache_init(int blksize, int assoc, int cachesize)
+{
+    struct Cache *cache;
+    int i;
+
+    cache = g_new(struct Cache, 1);
+    cache->blksize = blksize;
+    cache->assoc = assoc;

contrib/plugins/cache.c

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+    cache->cachesize = cachesize;
+    cache->num_sets = cachesize / (blksize * assoc);
+    cache->sets = g_new(struct CacheSet, cache->num_sets);
+
+    for (i = 0; i < cache->num_sets; i++) {
+        cache->sets[i].blocks = g_new0(struct CacheBlock, assoc);
+    }
+
+    cache->blk_mask = blksize - 1;
+    cache->set_mask = ((cache->num_sets - 1) <<

(pow_of_two(cache->blksize)));

Quoted 44 lines
contrib/plugins/cache.c new file +44 -0
+    cache->tag_mask = ~(cache->set_mask | cache->blk_mask);
+
+    return cache;
+}
+
+static int get_invalid_block(struct Cache *cache, uint64_t set)
+{
+    int i;
+
+    for (i = 0; i < cache->assoc; i++) {
+        if (!cache->sets[set].blocks[i].valid) {
+            /* conflict miss */
+            return i;
+        }
+    }
+
+    /* compulsary miss */
+    return -1;
+}
+
+static int get_replaced_block(struct Cache *cache)
+{
+    return g_rand_int_range(rng, 0, cache->assoc);
+}
+
+static bool in_cache(struct Cache *cache, uint64_t addr)
+{
+    int i;
+    uint64_t tag, set;
+
+    tag = extract_tag(cache, addr);
+    set = extract_set(cache, addr);
+
+    for (i = 0; i < cache->assoc; i++) {
+        if (cache->sets[set].blocks[i].tag == tag &&
+                cache->sets[set].blocks[i].valid) {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+static enum AccessResult access_cache(struct Cache *cache, uint64_t
Quoted 1 line

addr)

Does the enum really make things easier compared to a straight bool? You could just explain things with a comment:

/**
* access_cache() - simulate a cache access
* @cache: reference to the cache being used
* @addr: address of cached entity
*
* Returns true if the cache hit, false otherwise and the cache is
* updated for next time.
*/
static bool access_cache(struct Cache *cache, uint64_t addr) {

Quoted 8 lines

And then have:

  if (!access_cache(icache, addr)) {
      struct InsnData *insn = get_or_create(imiss_ht, userdata, addr);
      insn->misses++;
      imisses++;
  }

I applied that, probably better. Thanks.

Quoted 108 lines
Quoted 14 lines
contrib/plugins/cache.c new file +14 -0
+{
+    uint64_t tag, set;
+    int replaced_blk;
+
+    if (in_cache(cache, addr)) {
+        return HIT;
+    }
+
+    tag = extract_tag(cache, addr);
+    set = extract_set(cache, addr);
+
+    replaced_blk = get_invalid_block(cache, set);
+
+    if (replaced_blk == -1) {

contrib/plugins/cache.c

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+        replaced_blk = get_replaced_block(cache);
+    }
+
+    cache->sets[set].blocks[replaced_blk].tag = tag;
+    cache->sets[set].blocks[replaced_blk].valid = true;
+
+    return MISS;
+}
+
+struct InsnData *get_or_create(GHashTable *ht, struct InsnData

*insn_data,

contrib/plugins/cache.c

Quoted 3 lines
contrib/plugins/cache.c new file +3 -0
+                               uint64_t addr)
+{
+    struct InsnData *insn = g_hash_table_lookup(ht,

GUINT_TO_POINTER(addr));

contrib/plugins/cache.c

Quoted 2 lines
contrib/plugins/cache.c new file +2 -0
+    if (!insn) {
+        g_hash_table_insert(ht, GUINT_TO_POINTER(addr), (gpointer)

insn_data);

contrib/plugins/cache.c

Quoted 7 lines
contrib/plugins/cache.c new file +7 -0
+        insn = insn_data;
+    }
+
+    return insn;
+}
+
+static void vcpu_mem_access(unsigned int cpu_index,

qemu_plugin_meminfo_t info,

Quoted 5 lines
contrib/plugins/cache.c new file +5 -0
+                            uint64_t vaddr, void *userdata)
+{
+    uint64_t insn_addr;
+    uint64_t effective_addr;
+    struct qemu_plugin_hwaddr *hwaddr;

contrib/plugins/cache.c

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+
+    g_mutex_lock(&dmtx);
+    hwaddr = qemu_plugin_get_hwaddr(info, vaddr);
+    if (hwaddr && qemu_plugin_hwaddr_is_io(hwaddr)) {
+        g_free(userdata);
+        return;
+    }
+
+    insn_addr = ((struct InsnData *) userdata)->addr;
+    effective_addr = hwaddr ? qemu_plugin_hwaddr_phys_addr(hwaddr) :

vaddr;

contrib/plugins/cache.c

Quoted 3 lines
contrib/plugins/cache.c new file +3 -0
+
+    if (access_cache(dcache, effective_addr) == MISS) {
+        struct InsnData *insn = get_or_create(dmiss_ht, userdata,

insn_addr);

Quoted 14 lines
contrib/plugins/cache.c new file +14 -0
+        insn->misses++;
+        dmisses++;
+    }
+    dmem_accesses++;
+    g_mutex_unlock(&dmtx);
+}
+
+static void vcpu_insn_exec(unsigned int vcpu_index, void *userdata)
+{
+    uint64_t addr;
+
+    g_mutex_lock(&imtx);
+    addr = ((struct InsnData *) userdata)->addr;
+

contrib/plugins/cache.c

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+    if (access_cache(icache, addr) == MISS) {
+        struct InsnData *insn = get_or_create(imiss_ht, userdata, addr);
+        insn->misses++;
+        imisses++;
+    }
+    imem_accesses++;
+    g_mutex_unlock(&imtx);
+}
+
+static void vcpu_tb_trans(qemu_plugin_id_t id, struct qemu_plugin_tb

*tb)

Quoted 7 lines
contrib/plugins/cache.c new file +7 -0
+{
+    size_t n_insns;
+    size_t i;
+
+    n_insns = qemu_plugin_tb_n_insns(tb);
+    for (i = 0; i < n_insns; i++) {
+        struct qemu_plugin_insn *insn = qemu_plugin_tb_get_insn(tb, i);

contrib/plugins/cache.c line 250

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+        uint64_t effective_addr;
+
+        if (sys) {
+            effective_addr = (uint64_t) qemu_plugin_insn_haddr(insn);
+        } else {
+            effective_addr = (uint64_t) qemu_plugin_insn_vaddr(insn);
+        }
+
+        struct InsnData *ddata = g_new(struct InsnData, 1);
+        struct InsnData *idata = g_new(struct InsnData, 1);

OK I think I see what you where saying on the sync up earlier. You need to take into account any given instruction may get translated multiple times so I think for any given instruction you are tracking you want to get or create an entry here.

Quoted 1 line

Thanks for explaining that instruction can get translated multiple

times, I did not know that. Applied, thanks.

Quoted 61 lines

contrib/plugins/cache.c line 258

Quoted 8 lines
contrib/plugins/cache.c new file +8 -0
+
+        ddata->disas_str = qemu_plugin_insn_disas(insn);
+        ddata->misses = 0;
+        ddata->addr = effective_addr;
+
+        idata->disas_str = g_strdup(ddata->disas_str);
+        idata->misses = 0;
+        idata->addr = effective_addr;

And you might as well combine the InsnData to track both data and icache misses in one structure to avoid the duplication of records and strings.

Applied, thanks.

contrib/plugins/cache.c

Quoted 7 lines
contrib/plugins/cache.c new file +7 -0
+
+        qemu_plugin_register_vcpu_mem_cb(insn, vcpu_mem_access,
+                                         QEMU_PLUGIN_CB_NO_REGS,
+                                         rw, ddata);
+
+        qemu_plugin_register_vcpu_insn_exec_cb(insn, vcpu_insn_exec,
+                                               QEMU_PLUGIN_CB_NO_REGS,

idata);

contrib/plugins/cache.c line 274

Quoted 9 lines
contrib/plugins/cache.c new file +9 -0
+    }
+}
+
+static void print_entry(gpointer data)
+{
+    struct InsnData *insn = (struct InsnData *) data;
+    g_autoptr(GString) xx = g_string_new("");
+    g_string_append_printf(xx, "0x%" PRIx64 ": %s - misses: %lu\n",
+            insn->addr, insn->disas_str, insn->misses);

As you are likely going to want to post-process this data I would suggest a slightly more machine readable format:

address, misses, instruction
0x419298, 2, mov x0, x21
0x41aa40, 2, add x0, x0, #0x17

  0x419640, 2,  add x5, x4, #0x218
  0x41aa10, 2,  adrp x1, #0x48b000
  0x4002d0, 2,  adrp x16, #0x48b000

Applied, thanks.

Quoted 15 lines
contrib/plugins/cache.c new file +15 -0
+    qemu_plugin_outs(xx->str);
+}
+
+static void free_insn(gpointer data)
+{
+    struct InsnData *insn = (struct InsnData *) data;
+    g_free(insn->disas_str);
+    g_free(insn);
+}
+
+static void free_cache(struct Cache *cache)
+{
+    for (int i = 0; i < cache->num_sets; i++) {
+        g_free(cache->sets[i].blocks);
+    }
Quoted 9 lines

contrib/plugins/cache.c line 294

Quoted 5 lines
contrib/plugins/cache.c new file +5 -0
+
+    g_free(cache->sets);
+}
+
+static int cmp(gconstpointer a, gconstpointer b)

This will likely need renaming if you ever want to sort by different things.

Yes, I will have two comparator functions, one for data misses and one for instruction misses.

Quoted 115 lines
Quoted 9 lines
contrib/plugins/cache.c new file +8 -0
+{
+    struct InsnData *insn_a = (struct InsnData *) a;
+    struct InsnData *insn_b = (struct InsnData *) b;
+
+    return insn_a->misses < insn_b->misses ? 1 : -1;
+}
+
+static void print_stats()

contrib/plugins/cache.c

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+{
+    g_autoptr(GString) rep = g_string_new("");
+    g_string_append_printf(rep,
+            "Data accesses: %lu, Misses: %lu\nMiss rate: %lf%%\n\n",
+            dmem_accesses,
+            dmisses,
+            ((double)dmisses / dmem_accesses) * 100.0);
+
+    g_string_append_printf(rep,
+            "Instruction accesses: %lu, Misses: %lu\nMiss rate:

%lf%%\n\n",

Quoted 13 lines
contrib/plugins/cache.c new file +13 -0
+            imem_accesses,
+            imisses,
+            ((double)imisses / imem_accesses) * 100.0);
+
+    qemu_plugin_outs(rep->str);
+}
+
+static void plugin_exit()
+{
+    GList *curr;
+    int i;
+
+    g_mutex_lock(&imtx);

contrib/plugins/cache.c

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+    g_mutex_lock(&dmtx);
+    GList *dmiss_insns = g_hash_table_get_values(dmiss_ht);
+    GList *imiss_insns = g_hash_table_get_values(imiss_ht);
+    dmiss_insns = g_list_sort(dmiss_insns, cmp);
+    imiss_insns = g_list_sort(imiss_insns, cmp);
+
+    print_stats();
+
+    qemu_plugin_outs("Most data-missing instructions\n");
+    for (curr = dmiss_insns, i = 0; curr && i < limit; i++, curr =

curr->next) {

contrib/plugins/cache.c

Quoted 5 lines
contrib/plugins/cache.c new file +5 -0
+        print_entry(curr->data);
+    }
+
+    qemu_plugin_outs("\nMost fetch-missing instructions\n");
+    for (curr = imiss_insns, i = 0; curr && i < limit; i++, curr =

curr->next) {

Quoted 44 lines
contrib/plugins/cache.c new file +44 -0
+        print_entry(curr->data);
+    }
+
+    free_cache(dcache);
+    free_cache(icache);
+
+    g_list_free(dmiss_insns);
+    g_list_free(imiss_insns);
+
+    g_hash_table_destroy(dmiss_ht);
+    g_hash_table_destroy(imiss_ht);
+
+    g_mutex_unlock(&dmtx);
+    g_mutex_unlock(&imtx);
+}
+
+QEMU_PLUGIN_EXPORT
+int qemu_plugin_install(qemu_plugin_id_t id, const qemu_info_t *info,
+                        int argc, char **argv)
+{
+    int i;
+    int iassoc, iblksize, icachesize;
+    int dassoc, dblksize, dcachesize;
+
+    limit = 32;
+    sys = info->system_emulation;
+
+    dassoc = 8;
+    dblksize = 64;
+    dcachesize = dblksize * dassoc * 32;
+
+    iassoc = 8;
+    iblksize = 64;
+    icachesize = iblksize * iassoc * 32;
+
+    rng = g_rand_new();
+
+    for (i = 0; i < argc; i++) {
+        char *opt = argv[i];
+        if (g_str_has_prefix(opt, "limit=")) {
+            limit = g_ascii_strtoull(opt + 6, NULL, 10);
+        } else {
+            fprintf(stderr, "option parsing failed: %s\n", opt);
+            return -1;

contrib/plugins/cache.c

Quoted 10 lines
contrib/plugins/cache.c new file +10 -0
+        }
+    }
+
+    dcache = cache_init(dblksize, dassoc, dcachesize);
+    icache = cache_init(iblksize, iassoc, icachesize);
+
+    qemu_plugin_register_vcpu_tb_trans_cb(id, vcpu_tb_trans);
+    qemu_plugin_register_atexit_cb(id, plugin_exit, NULL);
+
+    dmiss_ht = g_hash_table_new_full(NULL, g_direct_equal, NULL,

free_insn);

Quoted 1 line

+ imiss_ht = g_hash_table_new_full(NULL, g_direct_equal, NULL,

free_insn);

contrib/plugins/cache.c line 398

Quoted 3 lines
contrib/plugins/cache.c new file +3 -0
+
+    return 0;
+}

--
Alex Bennée

#4 lore raw

RFC PATCH 2/3 plugins: cache: Enabled parameterization and added trace printing

In reply to Mahmoud Mandour

Made both icache and dcache configurable through plugin arguments and added memory trace printing in a separate file.

---
 contrib/plugins/cache.c | 68 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 2 deletions(-)
contrib/plugins/cache.c +66 -2
index f8c15ebed2..7d1d185480 100644
@@ -22,7 +22,7 @@ static GRand *rng;
 static GHashTable *dmiss_ht;
 static GHashTable *imiss_ht;
 
-static GMutex dmtx, imtx;
+static GMutex dmtx, imtx, fmtx;
 
 static int limit;
 static bool sys;
@@ -33,6 +33,8 @@ static uint64_t dmisses;
 static uint64_t imem_accesses;
 static uint64_t imisses;
 
+FILE *tracefile;
+
 static enum qemu_plugin_mem_rw rw = QEMU_PLUGIN_MEM_RW;
 
 enum AccessResult {
@@ -205,6 +207,16 @@ static void vcpu_mem_access(unsigned int cpu_index, qemu_plugin_meminfo_t info,
     insn_addr = ((struct InsnData *) userdata)->addr;
     effective_addr = hwaddr ? qemu_plugin_hwaddr_phys_addr(hwaddr) : vaddr;
 
+    if (tracefile) {
+        g_mutex_lock(&fmtx);
+        g_autoptr(GString) rep = g_string_new("");
+        bool is_store = qemu_plugin_mem_is_store(info);
+        g_string_append_printf(rep, "%c: 0x%" PRIx64,
+                is_store ? 'S' : 'L', effective_addr);
+        fprintf(tracefile, "%s\n", rep->str);
+        g_mutex_unlock(&fmtx);
+    }
+
     if (access_cache(dcache, effective_addr) == MISS) {
         struct InsnData *insn = get_or_create(dmiss_ht, userdata, insn_addr);
         insn->misses++;
@@ -221,11 +233,20 @@ static void vcpu_insn_exec(unsigned int vcpu_index, void *userdata)
     g_mutex_lock(&imtx);
     addr = ((struct InsnData *) userdata)->addr;
 
+    if (tracefile) {
+        g_mutex_lock(&fmtx);
+        g_autoptr(GString) rep = g_string_new("");
+        g_string_append_printf(rep, "I: 0x%" PRIx64, addr);
+        fprintf(tracefile, "%s\n", rep->str);
+        g_mutex_unlock(&fmtx);
+    }
+
     if (access_cache(icache, addr) == MISS) {
         struct InsnData *insn = get_or_create(imiss_ht, userdata, addr);
         insn->misses++;
         imisses++;
     }
+
     imem_accesses++;
     g_mutex_unlock(&imtx);
 }
@@ -352,6 +373,15 @@ static void plugin_exit()
 
     g_mutex_unlock(&dmtx);
     g_mutex_unlock(&imtx);
+
+    if (tracefile) {
+        fclose(tracefile);
+    }
+}
+
+static bool bad_cache_params(int blksize, int assoc, int cachesize)
+{
+    return (cachesize % blksize) != 0 || (cachesize % (blksize * assoc) != 0);
 }
 
 QEMU_PLUGIN_EXPORT
@@ -377,14 +407,48 @@ int qemu_plugin_install(qemu_plugin_id_t id, const qemu_info_t *info,
 
     for (i = 0; i < argc; i++) {
         char *opt = argv[i];
-        if (g_str_has_prefix(opt, "limit=")) {
+        if (g_str_has_prefix(opt, "I=")) {
+            gchar **toks = g_strsplit(opt + 2, " ", -1);
+            if (g_strv_length(toks) != 3) {
+                fprintf(stderr, "option parsing failed: %s\n", opt);
+                return -1;
+            }
+            icachesize = g_ascii_strtoull(toks[0], NULL, 10);
+            iassoc = g_ascii_strtoull(toks[1], NULL, 10);
+            iblksize = g_ascii_strtoull(toks[2], NULL, 10);
+        } else if (g_str_has_prefix(opt, "D=")) {
+            gchar **toks = g_strsplit(opt + 2, " ", -1);
+            if (g_strv_length(toks) != 3) {
+                fprintf(stderr, "option parsing failed: %s\n", opt);
+                return -1;
+            }
+            dcachesize = g_ascii_strtoull(toks[0], NULL, 10);
+            dassoc = g_ascii_strtoull(toks[1], NULL, 10);
+            dblksize = g_ascii_strtoull(toks[2], NULL, 10);
+        } else if (g_str_has_prefix(opt, "limit=")) {
             limit = g_ascii_strtoull(opt + 6, NULL, 10);
+        } else if (g_str_has_prefix(opt, "tracefile=")) {
+            char *file_name = opt + 10;
+            tracefile = fopen(file_name, "w");
+            if (!tracefile) {
+                fprintf(stderr, "could not open: %s for writing\n", file_name);
+            }
         } else {
             fprintf(stderr, "option parsing failed: %s\n", opt);
             return -1;
         }
     }
 
+    if (bad_cache_params(iblksize, iassoc, icachesize)) {
+        fprintf(stderr, "icache cannot be constructed from given parameters\n");
+        return -1;
+    }
+
+    if (bad_cache_params(dblksize, dassoc, dcachesize)) {
+        fprintf(stderr, "dcache cannot be constructed from given parameters\n");
+        return -1;
+    }
+
     dcache = cache_init(dblksize, dassoc, dcachesize);
     icache = cache_init(iblksize, iassoc, icachesize);
 
Signature · 1 line
2.25.1
#5 lore raw

RFC PATCH 3/3 plugins: cache: Added FIFO and LRU eviction policies.

In reply to Mahmoud Mandour

Now one of the three eviction policies can be chosen as an argument. On not specifying an argument, LRU is used by default.

---
 contrib/plugins/cache.c | 159 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 146 insertions(+), 13 deletions(-)
contrib/plugins/cache.c +146 -13
index 7d1d185480..341cd64e41 100644
@@ -18,6 +18,8 @@
 
 QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION;
 
+static bool fifo, lru, rnd;
+
 static GRand *rng;
 static GHashTable *dmiss_ht;
 static GHashTable *imiss_ht;
@@ -55,6 +57,8 @@ struct CacheBlock {
 
 struct CacheSet {
     struct CacheBlock *blocks;
+    uint16_t *priorities;
+    GQueue *evict_queue;
 };
 
 struct Cache {
@@ -93,6 +97,84 @@ static inline uint64_t extract_set(struct Cache *cache, uint64_t addr)
     return (addr & cache->set_mask) >> (pow_of_two(cache->blksize));
 }
 
+static void lru_priorities_init(struct Cache *cache)
+{
+    int i, j;
+
+    for (i = 0; i < cache->num_sets; i++) {
+        cache->sets[i].priorities = g_new(uint16_t, cache->assoc);
+        for (j = 0; j < cache->assoc; j++) {
+            cache->sets[i].priorities[j] = cache->assoc - j - 1;
+        }
+    }
+}
+
+static void lru_update_on_miss(struct Cache *cache,
+                                      int set_idx,
+                                      int blk_idx)
+{
+    int i;
+
+    for (i = 0; i < cache->assoc; i++) {
+        cache->sets[set_idx].priorities[i]++;
+    }
+
+    cache->sets[set_idx].priorities[blk_idx] = 0;
+}
+
+static void lru_update_on_hit(struct Cache *cache,
+                                         int set_idx,
+                                         int blk_idx)
+{
+    uint16_t blk_priority;
+    int i;
+
+    blk_priority = cache->sets[set_idx].priorities[blk_idx];
+    for (i = 0; i < cache->assoc; i++) {
+        if (cache->sets[set_idx].priorities[i] < blk_priority) {
+            cache->sets[set_idx].priorities[i]++;
+        }
+    }
+    cache->sets[set_idx].priorities[blk_idx] = 0;
+}
+
+static int lru_get_lru_block(struct Cache *cache, int set_idx)
+{
+    int i;
+
+    for (i = 0; i < cache->assoc; i++) {
+        if (cache->sets[set_idx].priorities[i] == cache->assoc - 1) {
+            return i;
+        }
+    }
+
+    g_assert_not_reached();
+}
+
+static void fifo_init(struct Cache *cache)
+{
+    int i;
+
+    for (i = 0; i < cache->num_sets; i++) {
+        cache->sets[i].evict_queue = g_queue_new();
+    }
+}
+
+static int fifo_get_first_in_block(struct Cache *cache, int set)
+{
+    GQueue *q = cache->sets[set].evict_queue;
+    return GPOINTER_TO_INT(g_queue_pop_tail(q));
+}
+
+static void fifo_update_on_miss(struct Cache *cache,
+                                int set,
+                                int blk_idx)
+{
+    GQueue *q = cache->sets[set].evict_queue;
+    g_queue_push_head(q, GINT_TO_POINTER(blk_idx));
+}
+
+
 static struct Cache *cache_init(int blksize, int assoc, int cachesize)
 {
     struct Cache *cache;
@@ -113,6 +195,12 @@ static struct Cache *cache_init(int blksize, int assoc, int cachesize)
     cache->set_mask = ((cache->num_sets - 1) << (pow_of_two(cache->blksize)));
     cache->tag_mask = ~(cache->set_mask | cache->blk_mask);
 
+    if (lru) {
+        lru_priorities_init(cache);
+    } else if (fifo) {
+        fifo_init(cache);
+    }
+
     return cache;
 }
 
@@ -131,12 +219,20 @@ static int get_invalid_block(struct Cache *cache, uint64_t set)
     return -1;
 }
 
-static int get_replaced_block(struct Cache *cache)
+static int get_replaced_block(struct Cache *cache, int set)
 {
-    return g_rand_int_range(rng, 0, cache->assoc);
+    if (rnd) {
+        return g_rand_int_range(rng, 0, cache->assoc);
+    } else if (lru) {
+        return lru_get_lru_block(cache, set);
+    } else if (fifo) {
+        return fifo_get_first_in_block(cache, set);
+    }
+
+    g_assert_not_reached();
 }
 
-static bool in_cache(struct Cache *cache, uint64_t addr)
+static int in_cache(struct Cache *cache, uint64_t addr)
 {
     int i;
     uint64_t tag, set;
@@ -147,29 +243,39 @@ static bool in_cache(struct Cache *cache, uint64_t addr)
     for (i = 0; i < cache->assoc; i++) {
         if (cache->sets[set].blocks[i].tag == tag &&
                 cache->sets[set].blocks[i].valid) {
-            return true;
+            return i;
         }
     }
 
-    return false;
+    return -1;
 }
 
 static enum AccessResult access_cache(struct Cache *cache, uint64_t addr)
 {
     uint64_t tag, set;
-    int replaced_blk;
-
-    if (in_cache(cache, addr)) {
-        return HIT;
-    }
+    int hit_blk, replaced_blk;
 
     tag = extract_tag(cache, addr);
     set = extract_set(cache, addr);
+    hit_blk = in_cache(cache, addr);
+
+    if (hit_blk != -1) {
+        if (lru) {
+            lru_update_on_hit(cache, set, hit_blk);
+        }
+        return HIT;
+    }
 
     replaced_blk = get_invalid_block(cache, set);
 
     if (replaced_blk == -1) {
-        replaced_blk = get_replaced_block(cache);
+        replaced_blk = get_replaced_block(cache, set);
+    }
+
+    if (lru) {
+        lru_update_on_miss(cache, set, replaced_blk);
+    } else if (fifo) {
+        fifo_update_on_miss(cache, set, replaced_blk);
     }
 
     cache->sets[set].blocks[replaced_blk].tag = tag;
@@ -307,6 +413,11 @@ static void free_cache(struct Cache *cache)
 {
     for (int i = 0; i < cache->num_sets; i++) {
         g_free(cache->sets[i].blocks);
+        if (lru) {
+            g_free(cache->sets[i].priorities);
+        } else if (fifo) {
+            g_queue_free(cache->sets[i].evict_queue);
+        }
     }
 
     g_free(cache->sets);
@@ -403,8 +514,6 @@ int qemu_plugin_install(qemu_plugin_id_t id, const qemu_info_t *info,
     iblksize = 64;
     icachesize = iblksize * iassoc * 32;
 
-    rng = g_rand_new();
-
     for (i = 0; i < argc; i++) {
         char *opt = argv[i];
         if (g_str_has_prefix(opt, "I=")) {
@@ -433,6 +542,22 @@ int qemu_plugin_install(qemu_plugin_id_t id, const qemu_info_t *info,
             if (!tracefile) {
                 fprintf(stderr, "could not open: %s for writing\n", file_name);
             }
+        } else if (g_str_has_prefix(opt, "evict=")) {
+            if (lru || rnd || fifo) {
+                fprintf(stderr, "eviction policy specified more than once\n");
+                return -1;
+            }
+            gchar *policy = opt + 6;
+            if (g_strcmp0(policy, "rand") == 0) {
+                rnd = true;
+            } else if (g_strcmp0(policy, "lru") == 0) {
+                lru = true;
+            } else if (g_strcmp0(policy, "fifo") == 0) {
+                fifo = true;
+            } else {
+                fprintf(stderr, "invalid eviction policy: %s\n", opt);
+                return -1;
+            }
         } else {
             fprintf(stderr, "option parsing failed: %s\n", opt);
             return -1;
@@ -449,6 +574,14 @@ int qemu_plugin_install(qemu_plugin_id_t id, const qemu_info_t *info,
         return -1;
     }
 
+    if (!rnd && !lru && !fifo) {
+        lru = true;
+    }
+
+    if (rnd) {
+        rng = g_rand_new();
+    }
+
     dcache = cache_init(dblksize, dassoc, dcachesize);
     icache = cache_init(iblksize, iassoc, icachesize);
 
Signature · 1 line
2.25.1
#6 lore raw
In reply to Mahmoud Mandour

Cc'ing Emilio too.

Quoted 15 lines · Mahmoud Mandour

In this RFC patch series, I propose an initial cache modelling TCG plugin. As of now, it models separate L1 data cache and L1 instruction cache. It supports three eviction policies: LRU, random, and FIFO. Once a policy is chosen, it's used for both instruction and data caches.

Mahmoud Mandour (3):
plugins: Added a new cache modelling plugin
plugins: cache: Enabled parameterization and added trace printing
plugins: cache: Added FIFO and LRU eviction policies.

 contrib/plugins/Makefile |   1 +
 contrib/plugins/cache.c  | 595 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 596 insertions(+)
 create mode 100644 contrib/plugins/cache.c
#7 lore raw

Thank you, I'll also CC Emilio in the v2 of this series.

Quoted 20 lines · Philippe Mathieu-Daudé

Cc'ing Emilio too.

Quoted 15 lines · Mahmoud Mandour

In this RFC patch series, I propose an initial cache modelling TCG plugin. As of now, it models separate L1 data cache and L1 instruction cache. It supports three eviction policies: LRU, random, and FIFO. Once a policy is chosen, it's used for both instruction and data caches.

Mahmoud Mandour (3):
plugins: Added a new cache modelling plugin
plugins: cache: Enabled parameterization and added trace printing
plugins: cache: Added FIFO and LRU eviction policies.

 contrib/plugins/Makefile |   1 +
 contrib/plugins/cache.c  | 595 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 596 insertions(+)
 create mode 100644 contrib/plugins/cache.c