Add Qualcomm Technologies, Inc. PM8008 MFD driver

new file mode 100644
index 0000000..7799368
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8008 PMIC bindings
+
+maintainers:
+  - Guru Das Srinagesh <[email protected]>
+
+description: |
+  Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates
+  all the necessary power management, housekeeping, and interface support
+  functions into a single IC.
+
+properties:
+  compatible:
+    const: qcom,pm8008
+
+  reg:
+    description:
+      I2C slave address.
+
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+    description: Parent interrupt.
+
+  "#interrupt-cells":
+    const: 2
+
+    description: |
+      The first cell is the IRQ number, the second cell is the IRQ trigger
+      flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+
+  interrupt-controller: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    type: object
+
+    description: |
+      The GPIO peripheral. This node may be specified twice, one for each GPIO.
+
+    properties:
+      compatible:
+        const: qcom,pm8008-gpio
+
+      reg:
+        description: Peripheral address of one of the two GPIO peripherals.
+        maxItems: 1
+
+      gpio-controller: true
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      "#gpio-cells":
+        const: 2
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - interrupt-controller
+      - "#gpio-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/qcom-pm8008.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    qupv3_se13_i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pm8008i@8 {
+        compatible = "qcom,pm8008";
+        reg = <0x8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+
+        gpio@c000 {
+          compatible = "qcom,pm8008-gpio";
+          reg = <0xc000>;
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+        };
+      };
+    };
+
+...

index 5232bc0..98201e9 100644
@@ -2117,6 +2117,20 @@ config MFD_ACER_A500_EC
 	  The controller itself is ENE KB930, it is running firmware
 	  customized for the specific needs of the Acer A500 hardware.
 
+config MFD_QCOM_PM8008
+	tristate "QCOM PM8008 Power Management IC"
+	depends on I2C && OF
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Select this option to get support for the Qualcomm Technologies, Inc.
+	  PM8008 PMIC chip. PM8008 is a dedicated camera PMIC that integrates
+	  all the necessary power management, housekeeping, and interface
+	  support functions into a single IC. This driver provides common
+	  support for accessing the device by instantiating all the child nodes
+	  under it in the device tree. Additional drivers must be enabled in
+	  order to use the functionality of the device.
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 

index eb42bd4..c522bd6 100644
@@ -265,6 +265,7 @@ obj-$(CONFIG_MFD_ROHM_BD957XMUF)	+= rohm-bd9576.o
 obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
 obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 obj-$(CONFIG_MFD_ACER_A500_EC)	+= acer-ec-a500.o
+obj-$(CONFIG_MFD_QCOM_PM8008)	+= qcom-pm8008.o
 
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
 obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o