Skip to contentSkip to conversation

emulator/btdev: Enable LE Privacy feature

PATCH Applied Tedd Ho-Jeong An 3 participants 5 messages Jun 1, 2021 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/3 emulator/btdev: Enable LE Privacy feature

From: Tedd Ho-Jeong An <[email protected]>

This patch enables LE Privacy to support LL Privacy feature.

---
 emulator/btdev.c | 1 +
 1 file changed, 1 insertion(+)
emulator/btdev.c +1 -0
index 692fabd71..13abad577 100644
@@ -5415,6 +5415,7 @@ static void set_bredrle_features(struct btdev *btdev)
 		btdev->features[4] |= 0x80;	/* 3 slot EDR ACL packets */
 		btdev->features[5] |= 0x01;	/* 5 slot EDR ACL packets */
 
+		btdev->le_features[0] |= 0x40;	/* LE PRIVACY */
 		btdev->le_features[1] |= 0x01;	/* LE 2M PHY */
 		btdev->le_features[1] |= 0x08;	/* LE Coded PHY */
 		btdev->le_features[1] |= 0x10;  /* LE EXT ADV */
Signature · 1 line
2.26.3
#1 lore raw

PATCH v2 2/3 tools/mgmt-tester: Add tests for experimental feature command

From: Tedd Ho-Jeong An <[email protected]>

This patch adds test cases for Read/Set Experimenal Feature commands.

---
 tools/mgmt-tester.c | 137 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 137 insertions(+)
tools/mgmt-tester.c +137 -0
index 4550d6e9c..c0faf6efc 100644
@@ -9124,6 +9124,100 @@ static const struct generic_data set_dev_flags_fail_3 = {
 	.expect_len = sizeof(set_dev_flags_rsp_param_fail_3),
 };
 
+static const uint8_t read_exp_feat_param_success[] = {
+	0x02, 0x00,				/* Feature Count */
+	0xd6, 0x49, 0xb0, 0xd1, 0x28, 0xeb,	/* UUID - Simultaneous */
+	0x27, 0x92, 0x96, 0x46, 0xc0, 0x42,	/* Central Peripheral */
+	0xb5, 0x10, 0x1b, 0x67,
+	0x00, 0x00, 0x00, 0x00,			/* Flags */
+	0x04, 0x00, 0x13, 0xac, 0x42, 0x02,	/* UUID - LL Privacy */
+	0xde, 0xb3, 0xea, 0x11, 0x73, 0xc2,
+	0x48, 0xa1, 0xc0, 0x15,
+	0x02, 0x00, 0x00, 0x00,			/* Flags */
+};
+
+static const struct generic_data read_exp_feat_success = {
+	.send_opcode = MGMT_OP_READ_EXP_FEATURES_INFO,
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_param = read_exp_feat_param_success,
+	.expect_len = sizeof(read_exp_feat_param_success),
+};
+
+static uint16_t settings_powered_le_privacy[] = { MGMT_OP_SET_LE,
+						MGMT_OP_SET_PRIVACY,
+						MGMT_OP_SET_POWERED, 0 };
+
+static const uint8_t set_exp_feat_param_ll_privacy[] = {
+	0x04, 0x00, 0x13, 0xac, 0x42, 0x02,	/* UUID - LL Privacy */
+	0xde, 0xb3, 0xea, 0x11, 0x73, 0xc2,
+	0x48, 0xa1, 0xc0, 0x15,
+	0x01,					/* Action - enable */
+};
+
+static const uint8_t set_exp_feat_rsp_param_ll_privacy[] = {
+	0x04, 0x00, 0x13, 0xac, 0x42, 0x02,	/* UUID - LL Privacy */
+	0xde, 0xb3, 0xea, 0x11, 0x73, 0xc2,
+	0x48, 0xa1, 0xc0, 0x15,
+	0x03, 0x00, 0x00, 0x00,			/* Action - enable */
+};
+
+static const struct generic_data set_exp_feat_enable_ll_privacy = {
+	.send_opcode = MGMT_OP_SET_EXP_FEATURE,
+	.send_param = set_exp_feat_param_ll_privacy,
+	.send_len = sizeof(set_exp_feat_param_ll_privacy),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_param = set_exp_feat_rsp_param_ll_privacy,
+	.expect_len = sizeof(set_exp_feat_rsp_param_ll_privacy),
+};
+
+static const uint8_t set_exp_feat_param_disable[17] = { 0x00 };
+static const uint8_t set_exp_feat_rsp_param_disable[20] = { 0x00 };
+
+static const struct generic_data set_exp_feat_disable = {
+	.send_opcode = MGMT_OP_SET_EXP_FEATURE,
+	.send_param = set_exp_feat_param_disable,
+	.send_len = sizeof(set_exp_feat_param_disable),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_param = set_exp_feat_rsp_param_disable,
+	.expect_len = sizeof(set_exp_feat_rsp_param_disable),
+};
+
+static const struct generic_data set_exp_feat_rejected = {
+	.setup_settings = settings_powered_le_privacy,
+	.send_opcode = MGMT_OP_SET_EXP_FEATURE,
+	.send_param = set_exp_feat_param_ll_privacy,
+	.send_len = sizeof(set_exp_feat_param_ll_privacy),
+	.expect_status = MGMT_STATUS_REJECTED,
+};
+
+static const uint8_t set_exp_feat_param_invalid[] = {
+	0x04, 0x00, 0x13, 0xac, 0x42, 0x02,	/* UUID - LL Privacy */
+	0xde, 0xb3, 0xea, 0x11, 0x73, 0xc2,
+	0x48, 0xa1, 0xc0, 0x15,
+	0xff,					/* Action - invalid */
+};
+
+static const struct generic_data set_exp_feat_invalid = {
+	.send_opcode = MGMT_OP_SET_EXP_FEATURE,
+	.send_param = set_exp_feat_param_invalid,
+	.send_len = sizeof(set_exp_feat_param_invalid),
+	.expect_status = MGMT_STATUS_INVALID_PARAMS,
+};
+
+static const uint8_t set_exp_feat_param_unknown[] = {
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* UUID - Unknown */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff,
+	0x01,					/* Action - enable */
+};
+
+static const struct generic_data set_exp_feat_unknown = {
+	.send_opcode = MGMT_OP_SET_EXP_FEATURE,
+	.send_param = set_exp_feat_param_unknown,
+	.send_len = sizeof(set_exp_feat_param_unknown),
+	.expect_status = MGMT_STATUS_NOT_SUPPORTED,
+};
+
 static bool power_off(uint16_t index)
 {
 	int sk, err;
@@ -11192,5 +11286,48 @@ int main(int argc, char *argv[])
 				setup_get_dev_flags,
 				test_command_generic);
 
+	/* MGMT_OP_READ_EXP_FEATURE
+	 * Read Experimental features - success
+	 */
+	test_bredrle50("Read Exp Feature - Success",
+				&read_exp_feat_success,
+				NULL, test_command_generic);
+	/* MGMT_OP_SET_EXP_FEATURE
+	 * Enable LL Privacy
+	 */
+	test_bredrle50("Set Exp Feature - Enable LL Privacy",
+				&set_exp_feat_enable_ll_privacy,
+				NULL, test_command_generic);
+
+	/* MGMT_OP_SET_EXP_FEATURE
+	 * Disable all features by sending zero UUID
+	 */
+	test_bredrle50("Set Exp Feature - Disable all",
+				&set_exp_feat_disable,
+				NULL, test_command_generic);
+
+	/* MGMT_OP_SET_EXP_FEATURE
+	 * Rejected - If the power is on, the command should be rejected
+	 */
+	test_bredrle50("Set Exp Feature - Rejected",
+				&set_exp_feat_rejected,
+				NULL, test_command_generic);
+
+	/* MGMT_OP_SET_EXP_FEATURE
+	 * Invalid parameter
+	 */
+	test_bredrle50("Set Exp Feature - Invalid params",
+				&set_exp_feat_invalid,
+				NULL, test_command_generic);
+
+
+	/* MGMT_OP_SET_EXP_FEATURE
+	 * Not Supported UUID
+	 */
+	test_bredrle50("Set Exp Feature - Unknown feature",
+				&set_exp_feat_unknown,
+				NULL, test_command_generic);
+
+
 	return tester_run();
 }
Signature · 1 line
2.26.3
#2 lore raw

PATCH v2 3/3 tools/mgmt-tester: Add tests for whitelist and resolving list

In reply to Tedd Ho-Jeong An

From: Tedd Ho-Jeong An <[email protected]>

This patch adds test cases for checking the whitelist and resolving list HCI commands when the LL Privacy feature is enabled.

---
 tools/mgmt-tester.c | 363 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 363 insertions(+)
tools/mgmt-tester.c +363 -0
index c0faf6efc..02525c905 100644
@@ -2066,6 +2066,21 @@ static const struct generic_data start_discovery_valid_param_power_off_1 = {
 	.expect_len = sizeof(start_discovery_bredrle_param),
 };
 
+static const char set_resolv_off_param[] = { 0x00 };
+static const char set_resolv_on_param[] = { 0x01 };
+
+static const struct generic_data start_discovery_ll_privacy_disable_resolv = {
+	.send_opcode = MGMT_OP_START_DISCOVERY,
+	.send_param = start_discovery_le_param,
+	.send_len = sizeof(start_discovery_le_param),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_param = start_discovery_le_param,
+	.expect_len = sizeof(start_discovery_le_param),
+	.expect_hci_command = BT_HCI_CMD_LE_SET_RESOLV_ENABLE,
+	.expect_hci_param = set_resolv_off_param,
+	.expect_hci_len = sizeof(set_resolv_off_param),
+};
+
 static const char stop_discovery_bredrle_param[] = { 0x07 };
 static const char stop_discovery_bredrle_invalid_param[] = { 0x06 };
 static const char stop_discovery_valid_hci[] = { 0x00, 0x00 };
@@ -4117,6 +4132,71 @@ static const struct generic_data add_device_success_5 = {
 	.expect_hci_len = sizeof(le_scan_enable),
 };
 
+static const uint8_t add_device_success_param_6[] = {
+					0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc,
+					0x01,
+					0x02,
+};
+
+static const uint8_t le_add_to_white_list_param[] = {
+	0x00,					/* Type */
+	0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc,	/* Address */
+};
+static const struct generic_data add_device_success_6 = {
+	.setup_settings = settings_powered_le,
+	.send_opcode = MGMT_OP_ADD_DEVICE,
+	.send_param = add_device_success_param_6,
+	.send_len = sizeof(add_device_success_param_6),
+	.expect_param = add_device_rsp_le,
+	.expect_len = sizeof(add_device_rsp_le),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_alt_ev = MGMT_EV_DEVICE_ADDED,
+	.expect_alt_ev_param = add_device_success_param_6,
+	.expect_alt_ev_len = sizeof(add_device_success_param_6),
+	.expect_hci_command = BT_HCI_CMD_LE_ADD_TO_WHITE_LIST,
+	.expect_hci_param = le_add_to_white_list_param,
+	.expect_hci_len = sizeof(le_add_to_white_list_param),
+};
+
+static const uint8_t le_add_to_resolv_list_param[] = {
+	0x00,						/* Type */
+	0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc,		/* Address */
+	0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88,	/* Peer IRK */
+	0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88,
+	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,	/* Local IRK */
+	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+};
+
+static const struct generic_data add_device_success_7 = {
+	.send_opcode = MGMT_OP_ADD_DEVICE,
+	.send_param = add_device_success_param_6,
+	.send_len = sizeof(add_device_success_param_6),
+	.expect_param = add_device_rsp_le,
+	.expect_len = sizeof(add_device_rsp_le),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_alt_ev = MGMT_EV_DEVICE_ADDED,
+	.expect_alt_ev_param = add_device_success_param_6,
+	.expect_alt_ev_len = sizeof(add_device_success_param_6),
+	.expect_hci_command = BT_HCI_CMD_LE_ADD_TO_RESOLV_LIST,
+	.expect_hci_param = le_add_to_resolv_list_param,
+	.expect_hci_len = sizeof(le_add_to_resolv_list_param),
+};
+
+static const struct generic_data add_device_success_8 = {
+	.send_opcode = MGMT_OP_ADD_DEVICE,
+	.send_param = add_device_success_param_6,
+	.send_len = sizeof(add_device_success_param_6),
+	.expect_param = add_device_rsp_le,
+	.expect_len = sizeof(add_device_rsp_le),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_alt_ev = MGMT_EV_DEVICE_ADDED,
+	.expect_alt_ev_param = add_device_success_param_6,
+	.expect_alt_ev_len = sizeof(add_device_success_param_6),
+	.expect_hci_command = BT_HCI_CMD_LE_SET_RESOLV_ENABLE,
+	.expect_hci_param = set_resolv_on_param,
+	.expect_hci_len = sizeof(set_resolv_on_param),
+};
+
 static const uint8_t remove_device_nval_1[] = {
 					0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc,
 					0xff,
@@ -4225,6 +4305,47 @@ static const struct generic_data remove_device_success_5 = {
 	.expect_alt_ev_len = sizeof(remove_device_param_2),
 };
 
+static const uint8_t remove_device_param_all[7] =  { 0x00 };
+
+static const struct generic_data remove_device_success_6 = {
+	.send_opcode = MGMT_OP_REMOVE_DEVICE,
+	.send_param = remove_device_param_all,
+	.send_len = sizeof(remove_device_param_all),
+	.expect_param = remove_device_param_all,
+	.expect_len = sizeof(remove_device_param_all),
+	.expect_status = MGMT_STATUS_SUCCESS,
+};
+
+static const struct generic_data remove_device_success_7 = {
+	.send_opcode = MGMT_OP_REMOVE_DEVICE,
+	.send_param = remove_device_param_2,
+	.send_len = sizeof(remove_device_param_2),
+	.expect_param = remove_device_param_2,
+	.expect_len = sizeof(remove_device_param_2),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_hci_command = BT_HCI_CMD_LE_REMOVE_FROM_WHITE_LIST,
+	.expect_hci_param = le_add_to_white_list_param,
+	.expect_hci_len = sizeof(le_add_to_white_list_param),
+	.expect_alt_ev = MGMT_EV_DEVICE_REMOVED,
+	.expect_alt_ev_param = remove_device_param_2,
+	.expect_alt_ev_len = sizeof(remove_device_param_2),
+};
+
+static const struct generic_data remove_device_success_8 = {
+	.send_opcode = MGMT_OP_REMOVE_DEVICE,
+	.send_param = remove_device_param_2,
+	.send_len = sizeof(remove_device_param_2),
+	.expect_param = remove_device_param_2,
+	.expect_len = sizeof(remove_device_param_2),
+	.expect_status = MGMT_STATUS_SUCCESS,
+	.expect_hci_command = BT_HCI_CMD_LE_REMOVE_FROM_RESOLV_LIST,
+	.expect_hci_param = le_add_to_white_list_param,
+	.expect_hci_len = sizeof(le_add_to_white_list_param),
+	.expect_alt_ev = MGMT_EV_DEVICE_REMOVED,
+	.expect_alt_ev_param = remove_device_param_2,
+	.expect_alt_ev_len = sizeof(remove_device_param_2),
+};
+
 static const struct generic_data read_adv_features_invalid_param_test = {
 	.send_opcode = MGMT_OP_READ_ADV_FEATURES,
 	.send_param = dummy_data,
@@ -9218,6 +9339,201 @@ static const struct generic_data set_exp_feat_unknown = {
 	.expect_status = MGMT_STATUS_NOT_SUPPORTED,
 };
 
+static const char load_irks_params[] = { 0x01, 0x00,
+			0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0x01,
+			0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88,
+			0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88 };
+
+
+static void setup_load_irks_callback(uint8_t status, uint16_t length,
+					const void *param, void *user_data)
+{
+	if (status != MGMT_STATUS_SUCCESS) {
+		tester_setup_failed();
+		return;
+	}
+
+	tester_print("Load IRK completed");
+}
+
+static void setup_exp_feat_callback(uint8_t status, uint16_t length,
+					const void *param, void *user_data)
+{
+	if (status != MGMT_STATUS_SUCCESS) {
+		tester_setup_failed();
+		return;
+	}
+
+	tester_print("LL Privacy Exp feature is enabled");
+}
+
+static void setup_ll_privacy(const void *test_data)
+{
+	struct test_data *data = tester_get_data();
+	unsigned char param[] = { 0x01 };
+	const uint8_t *ext_feat_param;
+	size_t ext_feat_len;
+	const char *irk_param;
+	size_t irk_len;
+	unsigned char privacy_param[] = { 0x01,
+			0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+			0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08 };
+
+	tester_print("Enabling LL Privacy feature");
+
+	ext_feat_param = set_exp_feat_param_ll_privacy;
+	ext_feat_len = sizeof(set_exp_feat_param_ll_privacy);
+
+	irk_param = load_irks_params;
+	irk_len = sizeof(load_irks_params);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_LE, data->mgmt_index,
+					sizeof(param), &param,
+					NULL, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_PRIVACY, data->mgmt_index,
+					sizeof(privacy_param), privacy_param,
+					NULL, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_LOAD_IRKS, data->mgmt_index,
+					irk_len, irk_param,
+					setup_load_irks_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_EXP_FEATURE, data->mgmt_index,
+					ext_feat_len, ext_feat_param,
+					setup_exp_feat_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_POWERED, data->mgmt_index,
+					sizeof(param), param,
+					setup_powered_callback, NULL, NULL);
+
+}
+
+static void setup_add_device_callback(uint8_t status, uint16_t length,
+					const void *param, void *user_data)
+{
+	if (status != MGMT_STATUS_SUCCESS) {
+		tester_setup_failed();
+		return;
+	}
+
+	tester_print("New Device is Added");
+}
+
+static void setup_ll_privacy_device(const void *test_data)
+{
+	struct test_data *data = tester_get_data();
+	unsigned char param[] = { 0x01 };
+	const uint8_t *ext_feat_param;
+	size_t ext_feat_len;
+	const char *irk_param;
+	size_t irk_len;
+	const uint8_t *dev_param;
+	size_t dev_len;
+	unsigned char privacy_param[] = { 0x01,
+			0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+			0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08 };
+
+	tester_print("Enabling LL Privacy feature");
+
+	ext_feat_param = set_exp_feat_param_ll_privacy;
+	ext_feat_len = sizeof(set_exp_feat_param_ll_privacy);
+
+	irk_param = load_irks_params;
+	irk_len = sizeof(load_irks_params);
+
+	dev_param = add_device_success_param_6;
+	dev_len = sizeof(add_device_success_param_6);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_LE, data->mgmt_index,
+					sizeof(param), &param,
+					NULL, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_PRIVACY, data->mgmt_index,
+					sizeof(privacy_param), privacy_param,
+					NULL, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_LOAD_IRKS, data->mgmt_index,
+					irk_len, irk_param,
+					setup_load_irks_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_EXP_FEATURE, data->mgmt_index,
+					ext_feat_len, ext_feat_param,
+					setup_exp_feat_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_ADD_DEVICE, data->mgmt_index,
+					dev_len, dev_param,
+					setup_add_device_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_POWERED, data->mgmt_index,
+					sizeof(param), param,
+					setup_powered_callback, NULL, NULL);
+}
+
+static const uint8_t add_device_success_param_4[] = {
+					0x11, 0x22, 0x33, 0x44, 0x55, 0x66,
+					0x01,
+					0x02,
+};
+
+/* Enable LL Privacy and Add 2 devices */
+static void setup_ll_privacy_device2(const void *test_data)
+{
+	struct test_data *data = tester_get_data();
+	unsigned char param[] = { 0x01 };
+	const uint8_t *ext_feat_param;
+	size_t ext_feat_len;
+	const char *irk_param;
+	size_t irk_len;
+	const uint8_t *dev_param, *dev2_param;
+	size_t dev_len, dev2_len;
+	unsigned char privacy_param[] = { 0x01,
+			0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+			0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08 };
+
+	tester_print("Enabling LL Privacy feature");
+
+	ext_feat_param = set_exp_feat_param_ll_privacy;
+	ext_feat_len = sizeof(set_exp_feat_param_ll_privacy);
+
+	irk_param = load_irks_params;
+	irk_len = sizeof(load_irks_params);
+
+	dev_param = add_device_success_param_6;
+	dev_len = sizeof(add_device_success_param_6);
+
+	dev2_param = add_device_success_param_4;
+	dev2_len = sizeof(add_device_success_param_4);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_LE, data->mgmt_index,
+					sizeof(param), &param,
+					NULL, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_PRIVACY, data->mgmt_index,
+					sizeof(privacy_param), privacy_param,
+					NULL, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_LOAD_IRKS, data->mgmt_index,
+					irk_len, irk_param,
+					setup_load_irks_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_EXP_FEATURE, data->mgmt_index,
+					ext_feat_len, ext_feat_param,
+					setup_exp_feat_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_ADD_DEVICE, data->mgmt_index,
+					dev_len, dev_param,
+					setup_add_device_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_ADD_DEVICE, data->mgmt_index,
+					dev2_len, dev2_param,
+					setup_add_device_callback, NULL, NULL);
+
+	mgmt_send(data->mgmt, MGMT_OP_SET_POWERED, data->mgmt_index,
+					sizeof(param), param,
+					setup_powered_callback, NULL, NULL);
+}
+
 static bool power_off(uint16_t index)
 {
 	int sk, err;
@@ -10090,6 +10406,13 @@ int main(int argc, char *argv[])
 	test_bredrle("Start Discovery - Power Off 1",
 				&start_discovery_valid_param_power_off_1,
 				NULL, test_command_generic);
+	/* MGMT_OP_START_DISCOVERY
+	 * Check if the resolving list is disabled before the scan parameter is
+	 * changed.
+	 */
+	test_bredrle50("Start Discovery - Disable Resolve List",
+				&start_discovery_ll_privacy_disable_resolv,
+				setup_ll_privacy_device, test_command_generic);
 
 	test_bredrle("Stop Discovery - Success 1",
 				&stop_discovery_success_test_1,
@@ -10489,6 +10812,26 @@ int main(int argc, char *argv[])
 	test_bredrle("Add Device - Success 5",
 				&add_device_success_5,
 				NULL, test_command_generic);
+	/* MGMT_OP_ADD_DEVICE
+	 * Add device and check the device is added to the whitelist
+	 */
+	test_bredrle50("Add Device - Success 6 - Add to whitelist",
+				&add_device_success_6,
+				NULL, test_command_generic);
+	/* MGMT_OP_ADD_DEVICE
+	 * Add device and check the device is added to the resolve list
+	 * when the LL Privacy is enabled
+	 */
+	test_bredrle50("Add Device - Success 7 - Add to resolv list",
+				&add_device_success_7,
+				setup_ll_privacy, test_command_generic);
+	/* MGMT_OP_ADD_DEVICE
+	 * Add device and check the Resolving List is enabled for the device
+	 * when the LL Privacy is enabled
+	 */
+	test_bredrle50("Add Device - Success 8 - Enable resolv list",
+				&add_device_success_8,
+				setup_ll_privacy, test_command_generic);
 
 	test_bredrle("Remove Device - Invalid Params 1",
 				&remove_device_fail_1,
@@ -10514,6 +10857,26 @@ int main(int argc, char *argv[])
 	test_le("Remove Device - Success 5",
 				&remove_device_success_5,
 				setup_add_device, test_remove_device);
+	/* MGMT_OP_REMOVE_DEVICE
+	 * Remove all devices
+	 */
+	test_bredrle50("Remove Device - Success 6 - All Devices",
+				&remove_device_success_6,
+				setup_add_device, test_remove_device);
+	/* MGMT_OP_REMOVE_DEVICE
+	 * Remove the device and check the device is removed from the whilte
+	 * list as well.
+	 */
+	test_bredrle50("Remove Device - Success 7 - Remove from whitelist",
+				&remove_device_success_7,
+				setup_ll_privacy_device2, test_command_generic);
+	/* MGMT_OP_REMOVE_DEVICE
+	 * Remove the device and check the device is removed from the resolving
+	 * list as well when the LL Privacy is enabled.
+	 */
+	test_bredrle50("Remove Device - Success 8 - Remove from resolv list",
+				&remove_device_success_8,
+				setup_ll_privacy_device2, test_command_generic);
 
 	test_bredrle("Read Advertising Features - Invalid parameters",
 				&read_adv_features_invalid_param_test,
Signature · 1 line
2.26.3
#3 lore raw
In reply to Tedd Ho-Jeong An

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=492061

---Test result---

Test Summary:

CheckPatch                    PASS      1.23 seconds
GitLint                       PASS      0.32 seconds
Prep - Setup ELL              PASS      41.15 seconds
Build - Prep                  PASS      0.10 seconds
Build - Configure             PASS      7.20 seconds
Build - Make                  PASS      176.25 seconds
Make Check                    PASS      8.86 seconds
Make Distcheck                PASS      208.06 seconds
Build w/ext ELL - Configure   PASS      7.32 seconds
Build w/ext ELL - Make        PASS      166.59 seconds

Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint

##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree

##############################
Test: Make Check - PASS
Desc: Run 'make check'

##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution

##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration

---
Regards,
Linux Bluetooth

maintainer Applied
#4 lore raw

Hi Tedd,

Quoted 66 lines · On Tue, Jun 1, 2021 at 2:19 PM <[email protected]> wrote:

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=492061

---Test result---

Test Summary:

CheckPatch                    PASS      1.23 seconds
GitLint                       PASS      0.32 seconds
Prep - Setup ELL              PASS      41.15 seconds
Build - Prep                  PASS      0.10 seconds
Build - Configure             PASS      7.20 seconds
Build - Make                  PASS      176.25 seconds
Make Check                    PASS      8.86 seconds
Make Distcheck                PASS      208.06 seconds
Build w/ext ELL - Configure   PASS      7.32 seconds
Build w/ext ELL - Make        PASS      166.59 seconds

Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint

##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree

##############################
Test: Make Check - PASS
Desc: Run 'make check'

##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution

##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration

Quoted 3 lines

---
Regards,
Linux Bluetooth

Applied, thanks.

Signature · 1 line
Luiz Augusto von Dentz