dt-bindings: regulator: Add support for TCS4526

Add a compatible string to support the TCS4526 device, which is compatible with Fairchild FAN53555 regulators.

---
 Documentation/devicetree/bindings/regulator/fan53555.txt | 2 +-
 1 file changed, 1 insertions(+), 1 deletions(-)

index e7fc045281d1..013f096ac0aa 100644
@@ -2,7 +2,7 @@
 
 Required properties:
   - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827",
-		"silergy,syr828" or "tcs,tcs4525".
+		"silergy,syr828", "tcs,tcs4525" or "tcs,tcs4526".
   - reg: I2C address
 
 Optional properties:

2.29.2

For rk3399pro boards the tcs4526 regulator supports the vdd_gpu regulator. The tcs4526 regulator has a chip id of <0>. Add the compatibile tcs,tcs4526

without this patch, the dmesg output is:
fan53555-regulator 0-0010: Chip ID 0 not supported! fan53555-regulator 0-0010: Failed to setup device!
fan53555-regulator: probe of 0-0010 failed with error -22
with this patch, the dmesg output is:
vdd_gpu: supplied by vcc5v0_sys

The regulators are described as:
- Dedicated power management IC TCS4525
- Lithium battery protection chip TCS4526

This has been tested with a Radxa Rock Pi N10.

---
 drivers/regulator/fan53555.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

index 2695be617373..ddab9359ea20 100644
@@ -93,6 +93,10 @@ enum {
 	TCS4525_CHIP_ID_12 = 12,
 };
 
+enum {
+	TCS4526_CHIP_ID_00 = 0,
+};
+
 /* IC mask revision */
 enum {
 	FAN53555_CHIP_REV_00 = 0x3,

@@ -374,6 +375,7 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 {
 	switch (di->chip_id) {
 	case TCS4525_CHIP_ID_12:
+	case TCS4526_CHIP_ID_00:
 		di->slew_reg = TCS4525_TIME;
 		di->slew_mask = TCS_SLEW_MASK;
 		di->slew_shift = TCS_SLEW_MASK;

@@ -564,6 +566,9 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
 	}, {
 		.compatible = "tcs,tcs4525",
 		.data = (void *)FAN53526_VENDOR_TCS
+	}, {
+		.compatible = "tcs,tcs4526",
+		.data = (void *)FAN53526_VENDOR_TCS
 	},
 	{ }
 };

@@ -672,6 +677,9 @@ static const struct i2c_device_id fan53555_id[] = {
 	}, {
 		.name = "tcs4525",
 		.driver_data = FAN53526_VENDOR_TCS
+	}, {
+		.name = "tcs4526",
+		.driver_data = FAN53526_VENDOR_TCS
 	},
 	{ },
 };

2.29.2

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[2/2] regulator: fan53555: add tcs4526

      commit: 5eee5eced95f1b35c8567688ed52932b7e58deee

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark