Skip to contentSkip to conversation

Drop CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT

PATCH In review Yangbo Lu 3 participants 6 messages Jun 3, 2021 – Jun 4, 2021

Subsystems (2)
lore
Share & tools
lore

Yangbo Lu

author
#0 lore raw

v3 cover Drop CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT

For eSDHC, power supply is through peripheral circuit. Some eSDHC versions have value 0 of the bit but that does not reflect the truth. 3.3V is common for SD/MMC, and is supported for all boards with eSDHC in current u-boot. So, make 3.3V is supported in default in code. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT can be enabled if future board does not support 3.3V.

Then CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 can be dropped. And i.MX eSDHC driver should drop it too, since it's not used by any one of i.MX board.

Changes for v2:
- Updated copyright.
Changes for v3:
- Fixed code logic in patch#1.
- Dropped wrong copyright.

Yangbo Lu (3):
mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT
mmc: fsl_esdhc_imx: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33

 drivers/mmc/Kconfig              |  7 +++++++
 drivers/mmc/fsl_esdhc.c          | 17 ++++++++++++++---
 drivers/mmc/fsl_esdhc_imx.c      |  7 +------
 include/configs/T208xQDS.h       |  3 +--
 include/configs/T208xRDB.h       |  3 +--
 include/configs/T4240RDB.h       |  3 +--
 include/configs/kontron_sl28.h   |  5 -----
 include/configs/ls1012a2g5rdb.h  |  7 +------
 include/configs/ls1012afrwy.h    |  7 +------
 include/configs/ls1012aqds.h     |  6 +-----
 include/configs/ls1012ardb.h     |  8 +-------
 include/configs/ls1028a_common.h |  7 +------
 include/configs/ls1043a_common.h |  9 +--------
 include/configs/ls1046a_common.h |  9 +--------
 include/configs/ls1088aqds.h     |  3 +--
 include/configs/ls1088ardb.h     |  7 +------
 include/configs/ls2080aqds.h     |  7 +------
 include/configs/ls2080ardb.h     |  7 +------
 include/configs/lx2160a_common.h |  7 +------
 scripts/config_whitelist.txt     |  1 -
 20 files changed, 37 insertions(+), 93 deletions(-)

base-commit: 89be8e31ccd1c53b010385ed0807eb00f0eec06a

Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v3 1/3 mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT

For eSDHC, power supply is through peripheral circuit. Some eSDHC versions have value 0 of the bit but that does not reflect the truth. 3.3V is common for SD/MMC, and is supported for all boards with eSDHC in current u-boot. So, make 3.3V is supported in default in code. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT can be enabled if future board does not support 3.3V.

This is also a fix-up for one previous patch, which converted to use IS_ENABLED() for CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 that is not a Kconfig option.

Fixes 52faec31827e ("mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()")

---
Changes for v2:
- Updated copyright.
Chagnes for v3:
- Fixed code logic.

---
 drivers/mmc/Kconfig     |  7 +++++++
 drivers/mmc/fsl_esdhc.c | 17 ++++++++++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)
drivers/mmc/Kconfig +7 -0
index 8901456967..0909f502a1 100644
@@ -798,6 +798,13 @@ config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
 	  This option assumes no hotplug, and u-boot has to make all the way to
 	  to linux to use 1.8v UHS-I speed mode if has card.
 
+config FSL_ESDHC_VS33_NOT_SUPPORT
+	bool "3.3V power supply not supported"
+	depends on FSL_ESDHC
+	help
+	  For eSDHC, power supply is through peripheral circuit. 3.3V support is
+	  common. Select this if 3.3V power supply not supported.
+
 config FSL_ESDHC_IMX
 	bool "Freescale/NXP i.MX eSDHC controller support"
 	help
drivers/mmc/fsl_esdhc.c +14 -3
index 7501fdb71e..1d98fa65c4 100644
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  * Andy Fleming
  *
  * Based vaguely on the pxa mmc code:
@@ -795,10 +795,21 @@ static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
 	u32 caps;
 
 	caps = esdhc_read32(&regs->hostcapblt);
+
+	/*
+	 * For eSDHC, power supply is through peripheral circuit. Some eSDHC
+	 * versions have value 0 of the bit but that does not reflect the
+	 * truth. 3.3V is common for SD/MMC, and is supported for all boards
+	 * with eSDHC in current u-boot. So, make 3.3V is supported in
+	 * default in code. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT can be enabled
+	 * if future board does not support 3.3V.
+	 */
+	caps |= HOSTCAPBLT_VS33;
+	if (IS_ENABLED(CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT))
+		caps &= ~HOSTCAPBLT_VS33;
+
 	if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC135))
 		caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
-	if (IS_ENABLED(CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33))
-		caps |= HOSTCAPBLT_VS33;
 	if (caps & HOSTCAPBLT_VS18)
 		cfg->voltages |= MMC_VDD_165_195;
 	if (caps & HOSTCAPBLT_VS30)
Signature · 1 line
2.25.1
Reviewed-by on v3 1/3
#2 lore raw

Re: [v3, 1/3] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT

Quoted 8 lines · Yangbo Lu

For eSDHC, power supply is through peripheral circuit. Some eSDHC versions have value 0 of the bit but that does not reflect the truth. 3.3V is common for SD/MMC, and is supported for all boards with eSDHC in current u-boot. So, make 3.3V is supported in default in code. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT can be enabled if future board does not support 3.3V.

Quoted 6 lines

This is also a fix-up for one previous patch, which converted to use IS_ENABLED() for CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 that is not a Kconfig option.

Fixes 52faec31827e ("mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()")

Best Regards,
Jaehoon Chung

Quoted 66 lines

---
Changes for v2:
- Updated copyright.
Chagnes for v3:
- Fixed code logic.

---
 drivers/mmc/Kconfig     |  7 +++++++
 drivers/mmc/fsl_esdhc.c | 17 ++++++++++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)
drivers/mmc/Kconfig +7 -0
index 8901456967..0909f502a1 100644
@@ -798,6 +798,13 @@ config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
 	  This option assumes no hotplug, and u-boot has to make all the way to
 	  to linux to use 1.8v UHS-I speed mode if has card.
 
+config FSL_ESDHC_VS33_NOT_SUPPORT
+	bool "3.3V power supply not supported"
+	depends on FSL_ESDHC
+	help
+	  For eSDHC, power supply is through peripheral circuit. 3.3V support is
+	  common. Select this if 3.3V power supply not supported.
+
 config FSL_ESDHC_IMX
 	bool "Freescale/NXP i.MX eSDHC controller support"
 	help
drivers/mmc/fsl_esdhc.c +14 -3
index 7501fdb71e..1d98fa65c4 100644
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  * Andy Fleming
  *
  * Based vaguely on the pxa mmc code:
@@ -795,10 +795,21 @@ static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
 	u32 caps;
 
 	caps = esdhc_read32(&regs->hostcapblt);
+
+	/*
+	 * For eSDHC, power supply is through peripheral circuit. Some eSDHC
+	 * versions have value 0 of the bit but that does not reflect the
+	 * truth. 3.3V is common for SD/MMC, and is supported for all boards
+	 * with eSDHC in current u-boot. So, make 3.3V is supported in
+	 * default in code. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT can be enabled
+	 * if future board does not support 3.3V.
+	 */
+	caps |= HOSTCAPBLT_VS33;
+	if (IS_ENABLED(CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT))
+		caps &= ~HOSTCAPBLT_VS33;
+
 	if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC135))
 		caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
-	if (IS_ENABLED(CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33))
-		caps |= HOSTCAPBLT_VS33;
 	if (caps & HOSTCAPBLT_VS18)
 		cfg->voltages |= MMC_VDD_165_195;
 	if (caps & HOSTCAPBLT_VS30)
author
#3 lore raw

PATCH v3 2/3 mmc: fsl_esdhc_imx: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33

In reply to Yangbo Lu

There is no i.MX board using such option. Drop it.

---
Changes for v2:
- Updated copyright.
Changes for v3:
- None.

---
 drivers/mmc/fsl_esdhc_imx.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/mmc/fsl_esdhc_imx.c +1 -6
index a4675838e5..566ce046ae 100644
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
- * Copyright 2019 NXP Semiconductors
+ * Copyright 2019, 2021 NXP
  * Andy Fleming
  * Yangbo Lu <[email protected]>
  *
@@ -1234,11 +1234,6 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
 			ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
 #endif
 
-/* T4240 host controller capabilities register should have VS33 bit */
-#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-	caps = caps | ESDHC_HOSTCAPBLT_VS33;
-#endif
-
 	if (caps & ESDHC_HOSTCAPBLT_VS18)
 		voltage_caps |= MMC_VDD_165_195;
 	if (caps & ESDHC_HOSTCAPBLT_VS30)
Signature · 1 line
2.25.1
author
#4 lore raw

PATCH v3 3/3 armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33

In reply to Yangbo Lu

Drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT is used instead.

---
Changes for v2:
- Updated copyright.
Changes for v3:
- Dropped wrong copyright.

---
 include/configs/T208xQDS.h       | 3 +--
 include/configs/T208xRDB.h       | 3 +--
 include/configs/T4240RDB.h       | 3 +--
 include/configs/kontron_sl28.h   | 5 -----
 include/configs/ls1012a2g5rdb.h  | 7 +------
 include/configs/ls1012afrwy.h    | 7 +------
 include/configs/ls1012aqds.h     | 6 +-----
 include/configs/ls1012ardb.h     | 8 +-------
 include/configs/ls1028a_common.h | 7 +------
 include/configs/ls1043a_common.h | 9 +--------
 include/configs/ls1046a_common.h | 9 +--------
 include/configs/ls1088aqds.h     | 3 +--
 include/configs/ls1088ardb.h     | 7 +------
 include/configs/ls2080aqds.h     | 7 +------
 include/configs/ls2080ardb.h     | 7 +------
 include/configs/lx2160a_common.h | 7 +------
 scripts/config_whitelist.txt     | 1 -
 17 files changed, 15 insertions(+), 84 deletions(-)
include/configs/T208xQDS.h +1 -2
index b1acb564c3..7bc792b8d1 100644
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2013 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -618,7 +618,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 /*
include/configs/T208xRDB.h +1 -2
index e467ef453d..b5197b3ed9 100644
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -574,7 +574,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 /*
include/configs/T4240RDB.h +1 -2
index a04d9137b3..139beae08d 100644
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 /*
@@ -585,7 +585,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 
include/configs/kontron_sl28.h +0 -5
index 5f11205802..bfb4e67c8f 100644
@@ -56,11 +56,6 @@
 #define CONFIG_DDR_CLK_FREQ		100000000
 #define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
 
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* ethernet */
 #define CONFIG_SYS_RX_ETH_BUFFER	8
 
include/configs/ls1012a2g5rdb.h +1 -6
index 9962b9872a..1c016dee97 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
+ * Copyright 2017, 2021 NXP
  */
 
 #ifndef __LS1012A2G5RDB_H__
@@ -13,11 +13,6 @@
 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
include/configs/ls1012afrwy.h +1 -6
index ba152834d5..9024d5e10f 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
  */
 
 #ifndef __LS1012AFRWY_H__
@@ -33,11 +33,6 @@
 	func(DHCP, dhcp, na)
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
include/configs/ls1012aqds.h +1 -5
index 36be8f42c9..e76f5ef23b 100644
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  */
 
 #ifndef __LS1012AQDS_H__
@@ -93,11 +94,6 @@
 				DSPI_CTAR_DT(0))
 #define CONFIG_SPI_FLASH_EON /* cs3 */
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
include/configs/ls1012ardb.h +1 -7
index 582945b2ab..1605c39fef 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  * Copyright 2016 Freescale Semiconductor, Inc.
  */
 
@@ -38,12 +38,6 @@
 #define __PHY_ETH2_MASK		0xFB
 #define __PHY_ETH1_MASK		0xFD
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-
 #define CONFIG_PCIE1		/* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
include/configs/ls1028a_common.h +1 -6
index 31fcdae986..5900b8f0e3 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __L1028A_COMMON_H
@@ -93,11 +93,6 @@
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define OCRAM_NONSECURE_SIZE		0x00010000
 #define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
 
include/configs/ls1043a_common.h +1 -8
index 29a3790c45..65d63e2fc9 100644
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Freescale Semiconductor
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __LS1043A_COMMON_H
@@ -171,13 +171,6 @@
 #endif
 #endif
 
-/*  MMC  */
-#ifndef SPL_NO_MMC
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-#endif
-
 /*  DSPI  */
 #ifndef SPL_NO_DSPI
 #ifdef CONFIG_FSL_DSPI
include/configs/ls1046a_common.h +1 -8
index 0c3978a922..11e1a184c5 100644
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __LS1046A_COMMON_H
@@ -165,13 +165,6 @@
 						CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
-/* MMC */
-#ifndef SPL_NO_MMC
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-#endif
-
 /* FMan ucode */
 #ifndef SPL_NO_FMAN
 #define CONFIG_SYS_DPAA_FMAN
include/configs/ls1088aqds.h +1 -2
index 4d04833c50..d032a3d111 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2020 NXP
+ * Copyright 2017, 2020-2021 NXP
  */
 
 #ifndef __LS1088A_QDS_H
@@ -361,7 +361,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_MEMAC
 
 /*  MMC  */
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 
include/configs/ls1088ardb.h +1 -6
index 6f36dd417a..5ade0eb439 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2020 NXP
+ * Copyright 2017, 2020-2021 NXP
  */
 
 #ifndef __LS1088A_RDB_H
@@ -507,11 +507,6 @@
 #endif
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #ifndef SPL_NO_ENV
 
 #define BOOT_TARGET_DEVICES(func) \
include/configs/ls2080aqds.h +1 -6
index b3fce1b7f7..41c1a86743 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2019-2020 NXP
+ * Copyright 2017, 2019-2021 NXP
  * Copyright 2015 Freescale Semiconductor
  */
 
@@ -318,11 +318,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #ifdef CONFIG_NXP_ESBC
include/configs/ls2080ardb.h +1 -6
index 8626a1d5e6..f2dc495fbb 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2019-2020 NXP
+ * Copyright 2017, 2019-2021 NXP
  * Copyright 2015 Freescale Semiconductor
  */
 
@@ -300,11 +300,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
include/configs/lx2160a_common.h +1 -6
index 9f2b8999cd..15ea0e4ce1 100644
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018-2020 NXP
+ * Copyright 2018-2021 NXP
  */
 
 #ifndef __LX2_COMMON_H
@@ -129,11 +129,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
 /* SATA */
 
 #ifdef CONFIG_SCSI
scripts/config_whitelist.txt +0 -1
index 8f92b82719..3dbcc042a8 100644
@@ -2307,7 +2307,6 @@ CONFIG_SYS_FSL_MAX_NUM_OF_SEC
 CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR
 CONFIG_SYS_FSL_MC_BASE
 CONFIG_SYS_FSL_MC_SIZE
-CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 CONFIG_SYS_FSL_NI_BASE
 CONFIG_SYS_FSL_NI_SIZE
 CONFIG_SYS_FSL_NO_SERDES
Signature · 1 line
2.25.1