xfs: CIL and log scalability improvements
Subsystems (2)
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
Cheers,
Dave.
The following changes since commit d07f6ca923ea0927a1024dfccafc5b53b61cfecc:
Linux 5.13-rc2 (2021-05-16 15:27:44 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git tags/xfs-cil-scale-tag
for you to fetch changes up to 856d6346ad5e76f230906792b1eb4ba70c860748:
xfs: expanding delayed logging design with background material (2021-06-04 12:42:29 +1000)
----------------------------------------------------------------
xfs: CIL and log scalability improvements
Performance improvements are largely documented in the change logs of the individual patches. Headline numbers are an increase in transaction rate from 700k commits/s to 1.7M commits/s, and a reduction in fua/flush operations by 2-3 orders of magnitude on metadata heavy workloads that don't use fsync.
Summary of series:
Patches Modifications ------- ------------- 1-7: log write FUA/FLUSH optimisations 8: bug fix 9-11: Async CIL pushes 12-25: xlog_write() rework 26-39: CIL commit scalability
The log write FUA/FLUSH optimisations reduce the number of cache flushes required to flush the CIL to the journal. It extends the old pre-delayed logging ordering semantics required by writing individual transactions to the iclogs out to cover then CIL checkpoint transactions rather than individual writes to the iclogs. In doing so, we reduce the cache flush requirements to once per CIL checkpoint rather than once per iclog write.
The async CIL pushes fix a pipeline limitation that only allowed a single CIL push to be processed at a time. This was causing CIL checkpoint writing to become CPU bound as only a single CIL checkpoint could be pushed at a time. The checkpoint pipleine was designed to allow multiple pushes to be in flight at once and use careful ordering of the commit records to ensure correct recovery order, but the workqueue implementation didn't allow concurrent works to be run. The concurrent works now extend out to 4 CIL checkpoints running at a time, hence removing the CPU usage limiations without introducing new lock contention issues.
The xlog_write() rework is long overdue. The code is complex, difficult to understand, full of tricky, subtle corner cases and just generally really hard to modify. This patchset reworks the xlog_write() API to reduce the processing overhead of writing out long log vector chains, and factors the xlog_write() code into a simple, compact fast path along with a clearer slow path to handle the complex cases.
The CIL commit scalability patchset removes spinlocks from the transaction commit fast path. These spinlocks are the performance limiting bottleneck in the transaction commit path, so we apply a variety of different techniques to do either atomic. lockless or per-cpu updates of the CIL tracking structures during commits. This greatly increases the throughput of the the transaction commit engine, moving the contention point to the log space tracking algorithms after doubling throughput on 32-way workloads.
----------------------------------------------------------------
Dave Chinner (39):
xfs: log stripe roundoff is a property of the log
xfs: separate CIL commit record IO
xfs: remove xfs_blkdev_issue_flush
xfs: async blkdev cache flush
xfs: CIL checkpoint flushes caches unconditionally
xfs: remove need_start_rec parameter from xlog_write()
xfs: journal IO cache flush reductions
xfs: Fix CIL throttle hang when CIL space used going backwards
xfs: xfs_log_force_lsn isn't passed a LSN
xfs: AIL needs asynchronous CIL forcing
xfs: CIL work is serialised, not pipelined
xfs: factor out the CIL transaction header building
xfs: only CIL pushes require a start record
xfs: embed the xlog_op_header in the unmount record
xfs: embed the xlog_op_header in the commit record
xfs: log tickets don't need log client id
xfs: move log iovec alignment to preparation function
xfs: reserve space and initialise xlog_op_header in item formatting
xfs: log ticket region debug is largely useless
xfs: pass lv chain length into xlog_write()
xfs: introduce xlog_write_single()
xfs:_introduce xlog_write_partial()
xfs: xlog_write() no longer needs contwr state
xfs: xlog_write() doesn't need optype anymore
xfs: CIL context doesn't need to count iovecs
xfs: use the CIL space used counter for emptiness checks
xfs: lift init CIL reservation out of xc_cil_lock
xfs: rework per-iclog header CIL reservation
xfs: introduce per-cpu CIL tracking structure
xfs: implement percpu cil space used calculation
xfs: track CIL ticket reservation in percpu structure
xfs: convert CIL busy extents to per-cpu
xfs: Add order IDs to log items in CIL
xfs: convert CIL to unordered per cpu lists
xfs: convert log vector chain to use list heads
xfs: move CIL ordering to the logvec chain
xfs: avoid cil push lock if possible
xfs: xlog_sync() manually adjusts grant head space
xfs: expanding delayed logging design with background material
Documentation/filesystems/xfs-delayed-logging-design.rst | 361 ++++++++++++++++++++++++++---- fs/xfs/libxfs/xfs_log_format.h | 4 - fs/xfs/libxfs/xfs_types.h | 1 + fs/xfs/xfs_bio_io.c | 35 +++ fs/xfs/xfs_buf.c | 2 +- fs/xfs/xfs_buf_item.c | 39 ++-- fs/xfs/xfs_dquot_item.c | 2 +- fs/xfs/xfs_file.c | 20 +- fs/xfs/xfs_inode.c | 10 +- fs/xfs/xfs_inode_item.c | 18 +- fs/xfs/xfs_inode_item.h | 2 +- fs/xfs/xfs_linux.h | 2 + fs/xfs/xfs_log.c | 1015 +++++++++++++++++++++++++++++++++++++++--------------------------------------------- fs/xfs/xfs_log.h | 66 ++---- fs/xfs/xfs_log_cil.c | 822 ++++++++++++++++++++++++++++++++++++++++++++++++++------------------ fs/xfs/xfs_log_priv.h | 114 +++++----- fs/xfs/xfs_super.c | 13 +- fs/xfs/xfs_super.h | 1 - fs/xfs/xfs_sysfs.c | 1 + fs/xfs/xfs_trace.c | 1 + fs/xfs/xfs_trans.c | 18 +- fs/xfs/xfs_trans.h | 5 +- fs/xfs/xfs_trans_ail.c | 11 +- fs/xfs/xfs_trans_priv.h | 3 +- include/linux/cpuhotplug.h | 1 + 25 files changed, 1603 insertions(+), 964 deletions(-)
Signature · 2 lines
Dave Chinner [email protected]
Quoted 4 lines · Dave Chinner
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
I tried that and threw the series at fstests, which crashed all VMs with the following null pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 731060 Comm: mount Not tainted 5.13.0-rc4-djwx #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:xlog_cil_init+0x2f7/0x370 [xfs] Code: b4 7e a0 bf 1c 00 00 00 e8 c6 3b 8d e0 85 c0 78 0c c6 05 13 7f 12 00 01 e9 7b fd ff ff 4 2 48 c7 c6 f8 bf 7f a0 <48> 8b 39 e8 f0 24 04 00 31 ff b9 fc 05 00 00 48 c7 c2 d9 b3 7e a0 RSP: 0018:ffffc9000776bcd0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000fffffff0 RSI: ffffffffa07fbff8 RDI: 00000000ffffffff RBP: ffff888004cf3c00 R08: ffffffffa078fb40 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000048 R12: ffff888052810000 R13: 0000607f81c0b0f8 R14: ffff888004a09c00 R15: ffff888004a09c00 FS: 00007fd2e4486840(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000528e5004 CR4: 00000000001706a0 Call Trace: xlog_alloc_log+0x51f/0x5f0 [xfs] xfs_log_mount+0x55/0x340 [xfs] xfs_mountfs+0x4e4/0x9f0 [xfs] xfs_fs_fill_super+0x4dd/0x7a0 [xfs] ? suffix_kstrtoint.constprop.0+0xe0/0xe0 [xfs] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 ? capable+0x2f/0x50 path_mount+0x6fb/0xa90 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd2e46e8dde Code: 48 8b 0d b5 80 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0
f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 82 80 0c 00 f7 d8 64 89 01 48
I'm pretty sure that's due to:
if (!xlog_cil_pcp_init) {
int ret;
ret = cpuhp_setup_state_nocalls(CPUHP_XFS_CIL_DEAD,
"xfs/cil_pcp:dead", NULL,
xlog_cil_pcp_dead);
if (ret < 0) {
xfs_warn(cil->xc_log->l_mp,
"Failed to initialise CIL hotplug, error %d. XFS is non-functional.",
ret);Because we haven't set cil->xc_log yet.
--D
Quoted 139 lines
Cheers,
Dave.
The following changes since commit
d07f6ca923ea0927a1024dfccafc5b53b61cfecc:Linux 5.13-rc2 (2021-05-16 15:27:44 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.gittags/xfs-cil-scale-tagfor you to fetch changes up to
856d6346ad5e76f230906792b1eb4ba70c860748:xfs: expanding delayed logging design with background material (2021-06-04 12:42:29 +1000)
----------------------------------------------------------------
xfs: CIL and log scalability improvementsPerformance improvements are largely documented in the change logs of the individual patches. Headline numbers are an increase in transaction rate from 700k commits/s to 1.7M commits/s, and a reduction in fua/flush operations by 2-3 orders of magnitude on metadata heavy workloads that don't use fsync.
Summary of series:
Patches Modifications ------- ------------- 1-7: log write FUA/FLUSH optimisations 8: bug fix 9-11: Async CIL pushes 12-25: xlog_write() rework 26-39: CIL commit scalabilityThe log write FUA/FLUSH optimisations reduce the number of cache flushes required to flush the CIL to the journal. It extends the old pre-delayed logging ordering semantics required by writing individual transactions to the iclogs out to cover then CIL checkpoint transactions rather than individual writes to the iclogs. In doing so, we reduce the cache flush requirements to once per CIL checkpoint rather than once per iclog write.
The async CIL pushes fix a pipeline limitation that only allowed a single CIL push to be processed at a time. This was causing CIL checkpoint writing to become CPU bound as only a single CIL checkpoint could be pushed at a time. The checkpoint pipleine was designed to allow multiple pushes to be in flight at once and use careful ordering of the commit records to ensure correct recovery order, but the workqueue implementation didn't allow concurrent works to be run. The concurrent works now extend out to 4 CIL checkpoints running at a time, hence removing the CPU usage limiations without introducing new lock contention issues.
The
xlog_write()rework is long overdue. The code is complex, difficult to understand, full of tricky, subtle corner cases and just generally really hard to modify. This patchset reworks thexlog_write()API to reduce the processing overhead of writing out long log vector chains, and factors thexlog_write()code into a simple, compact fast path along with a clearer slow path to handle the complex cases.The CIL commit scalability patchset removes spinlocks from the transaction commit fast path. These spinlocks are the performance limiting bottleneck in the transaction commit path, so we apply a variety of different techniques to do either atomic. lockless or per-cpu updates of the CIL tracking structures during commits. This greatly increases the throughput of the the transaction commit engine, moving the contention point to the log space tracking algorithms after doubling throughput on 32-way workloads.
----------------------------------------------------------------
Dave Chinner (39):
xfs: log stripe roundoff is a property of the log
xfs: separate CIL commit record IO
xfs: removexfs_blkdev_issue_flush
xfs: async blkdev cache flush
xfs: CIL checkpoint flushes caches unconditionally
xfs: removeneed_start_recparameter fromxlog_write()
xfs: journal IO cache flush reductions
xfs: Fix CIL throttle hang when CIL space used going backwards
xfs:xfs_log_force_lsnisn't passed a LSN
xfs: AIL needs asynchronous CIL forcing
xfs: CIL work is serialised, not pipelined
xfs: factor out the CIL transaction header building
xfs: only CIL pushes require a start record
xfs: embed thexlog_op_headerin the unmount record
xfs: embed thexlog_op_headerin the commit record
xfs: log tickets don't need log client id
xfs: move log iovec alignment to preparation function
xfs: reserve space and initialisexlog_op_headerin item formatting
xfs: log ticket region debug is largely useless
xfs: pass lv chain length intoxlog_write()
xfs: introducexlog_write_single()
xfs:_introducexlog_write_partial()
xfs:xlog_write()no longer needs contwr state
xfs:xlog_write()doesn't need optype anymore
xfs: CIL context doesn't need to count iovecs
xfs: use the CIL space used counter for emptiness checks
xfs: lift init CIL reservation out ofxc_cil_lock
xfs: rework per-iclog header CIL reservation
xfs: introduce per-cpu CIL tracking structure
xfs: implement percpu cil space used calculation
xfs: track CIL ticket reservation in percpu structure
xfs: convert CIL busy extents to per-cpu
xfs: Add order IDs to log items in CIL
xfs: convert CIL to unordered per cpu lists
xfs: convert log vector chain to use list heads
xfs: move CIL ordering to the logvec chain
xfs: avoid cil push lock if possible
xfs:xlog_sync()manually adjusts grant head space
xfs: expanding delayed logging design with background materialDocumentation/filesystems/xfs-delayed-logging-design.rst | 361 ++++++++++++++++++++++++++---- fs/xfs/libxfs/xfs_log_format.h | 4 - fs/xfs/libxfs/xfs_types.h | 1 + fs/xfs/xfs_bio_io.c | 35 +++ fs/xfs/xfs_buf.c | 2 +- fs/xfs/xfs_buf_item.c | 39 ++-- fs/xfs/xfs_dquot_item.c | 2 +- fs/xfs/xfs_file.c | 20 +- fs/xfs/xfs_inode.c | 10 +- fs/xfs/xfs_inode_item.c | 18 +- fs/xfs/xfs_inode_item.h | 2 +- fs/xfs/xfs_linux.h | 2 + fs/xfs/xfs_log.c | 1015 +++++++++++++++++++++++++++++++++++++++--------------------------------------------- fs/xfs/xfs_log.h | 66 ++---- fs/xfs/xfs_log_cil.c | 822 ++++++++++++++++++++++++++++++++++++++++++++++++++------------------ fs/xfs/xfs_log_priv.h | 114 +++++----- fs/xfs/xfs_super.c | 13 +- fs/xfs/xfs_super.h | 1 - fs/xfs/xfs_sysfs.c | 1 + fs/xfs/xfs_trace.c | 1 + fs/xfs/xfs_trans.c | 18 +- fs/xfs/xfs_trans.h | 5 +- fs/xfs/xfs_trans_ail.c | 11 +- fs/xfs/xfs_trans_priv.h | 3 +- include/linux/cpuhotplug.h | 1 + 25 files changed, 1603 insertions(+), 964 deletions(-)Signature · 2 lines
Dave Chinner [email protected]
Quoted 58 lines · Darrick J. Wong
Quoted 4 lines · Dave Chinner
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
I tried that and threw the series at fstests, which crashed all VMs with the following null pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 731060 Comm: mount Not tainted 5.13.0-rc4-djwx #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:xlog_cil_init+0x2f7/0x370 [xfs] Code: b4 7e a0 bf 1c 00 00 00 e8 c6 3b 8d e0 85 c0 78 0c c6 05 13 7f 12 00 01 e9 7b fd ff ff 4 2 48 c7 c6 f8 bf 7f a0 <48> 8b 39 e8 f0 24 04 00 31 ff b9 fc 05 00 00 48 c7 c2 d9 b3 7e a0 RSP: 0018:ffffc9000776bcd0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000fffffff0 RSI: ffffffffa07fbff8 RDI: 00000000ffffffff RBP: ffff888004cf3c00 R08: ffffffffa078fb40 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000048 R12: ffff888052810000 R13: 0000607f81c0b0f8 R14: ffff888004a09c00 R15: ffff888004a09c00 FS: 00007fd2e4486840(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000528e5004 CR4: 00000000001706a0 Call Trace: xlog_alloc_log+0x51f/0x5f0 [xfs] xfs_log_mount+0x55/0x340 [xfs] xfs_mountfs+0x4e4/0x9f0 [xfs] xfs_fs_fill_super+0x4dd/0x7a0 [xfs] ? suffix_kstrtoint.constprop.0+0xe0/0xe0 [xfs] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 ? capable+0x2f/0x50 path_mount+0x6fb/0xa90 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd2e46e8dde Code: 48 8b 0d b5 80 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 82 80 0c 00 f7 d8 64 89 01 48
I'm pretty sure that's due to:
if (!xlog_cil_pcp_init) { int ret; ret = cpuhp_setup_state_nocalls(CPUHP_XFS_CIL_DEAD, "xfs/cil_pcp:dead", NULL, xlog_cil_pcp_dead); if (ret < 0) { xfs_warn(cil->xc_log->l_mp, "Failed to initialise CIL hotplug, error %d. XFS is non-functional.", ret);
Quoted 1 line
Because we haven't set
cil->xc_logyet.
And having now fixed that, I get tons of:
XFS (sda): Failed to initialise CIL hotplug, error -16. XFS is non-functional.
XFS: Assertion failed: 0, file: fs/xfs/xfs_log_cil.c, line: 1532
------------[ cut here ]------------ WARNING: CPU: 2 PID: 113983 at fs/xfs/xfs_message.c:112 assfail+0x3c/0x40 [xfs] Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_REDIR
EBUSY??
--D
Quoted 140 lines
Quoted 140 lines
Cheers,
Dave.
The following changes since commit
d07f6ca923ea0927a1024dfccafc5b53b61cfecc:Linux 5.13-rc2 (2021-05-16 15:27:44 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.gittags/xfs-cil-scale-tagfor you to fetch changes up to
856d6346ad5e76f230906792b1eb4ba70c860748:xfs: expanding delayed logging design with background material (2021-06-04 12:42:29 +1000)
----------------------------------------------------------------
xfs: CIL and log scalability improvementsPerformance improvements are largely documented in the change logs of the individual patches. Headline numbers are an increase in transaction rate from 700k commits/s to 1.7M commits/s, and a reduction in fua/flush operations by 2-3 orders of magnitude on metadata heavy workloads that don't use fsync.
Summary of series:
Patches Modifications ------- ------------- 1-7: log write FUA/FLUSH optimisations 8: bug fix 9-11: Async CIL pushes 12-25: xlog_write() rework 26-39: CIL commit scalabilityThe log write FUA/FLUSH optimisations reduce the number of cache flushes required to flush the CIL to the journal. It extends the old pre-delayed logging ordering semantics required by writing individual transactions to the iclogs out to cover then CIL checkpoint transactions rather than individual writes to the iclogs. In doing so, we reduce the cache flush requirements to once per CIL checkpoint rather than once per iclog write.
The async CIL pushes fix a pipeline limitation that only allowed a single CIL push to be processed at a time. This was causing CIL checkpoint writing to become CPU bound as only a single CIL checkpoint could be pushed at a time. The checkpoint pipleine was designed to allow multiple pushes to be in flight at once and use careful ordering of the commit records to ensure correct recovery order, but the workqueue implementation didn't allow concurrent works to be run. The concurrent works now extend out to 4 CIL checkpoints running at a time, hence removing the CPU usage limiations without introducing new lock contention issues.
The
xlog_write()rework is long overdue. The code is complex, difficult to understand, full of tricky, subtle corner cases and just generally really hard to modify. This patchset reworks thexlog_write()API to reduce the processing overhead of writing out long log vector chains, and factors thexlog_write()code into a simple, compact fast path along with a clearer slow path to handle the complex cases.The CIL commit scalability patchset removes spinlocks from the transaction commit fast path. These spinlocks are the performance limiting bottleneck in the transaction commit path, so we apply a variety of different techniques to do either atomic. lockless or per-cpu updates of the CIL tracking structures during commits. This greatly increases the throughput of the the transaction commit engine, moving the contention point to the log space tracking algorithms after doubling throughput on 32-way workloads.
----------------------------------------------------------------
Dave Chinner (39):
xfs: log stripe roundoff is a property of the log
xfs: separate CIL commit record IO
xfs: removexfs_blkdev_issue_flush
xfs: async blkdev cache flush
xfs: CIL checkpoint flushes caches unconditionally
xfs: removeneed_start_recparameter fromxlog_write()
xfs: journal IO cache flush reductions
xfs: Fix CIL throttle hang when CIL space used going backwards
xfs:xfs_log_force_lsnisn't passed a LSN
xfs: AIL needs asynchronous CIL forcing
xfs: CIL work is serialised, not pipelined
xfs: factor out the CIL transaction header building
xfs: only CIL pushes require a start record
xfs: embed thexlog_op_headerin the unmount record
xfs: embed thexlog_op_headerin the commit record
xfs: log tickets don't need log client id
xfs: move log iovec alignment to preparation function
xfs: reserve space and initialisexlog_op_headerin item formatting
xfs: log ticket region debug is largely useless
xfs: pass lv chain length intoxlog_write()
xfs: introducexlog_write_single()
xfs:_introducexlog_write_partial()
xfs:xlog_write()no longer needs contwr state
xfs:xlog_write()doesn't need optype anymore
xfs: CIL context doesn't need to count iovecs
xfs: use the CIL space used counter for emptiness checks
xfs: lift init CIL reservation out ofxc_cil_lock
xfs: rework per-iclog header CIL reservation
xfs: introduce per-cpu CIL tracking structure
xfs: implement percpu cil space used calculation
xfs: track CIL ticket reservation in percpu structure
xfs: convert CIL busy extents to per-cpu
xfs: Add order IDs to log items in CIL
xfs: convert CIL to unordered per cpu lists
xfs: convert log vector chain to use list heads
xfs: move CIL ordering to the logvec chain
xfs: avoid cil push lock if possible
xfs:xlog_sync()manually adjusts grant head space
xfs: expanding delayed logging design with background materialDocumentation/filesystems/xfs-delayed-logging-design.rst | 361 ++++++++++++++++++++++++++---- fs/xfs/libxfs/xfs_log_format.h | 4 - fs/xfs/libxfs/xfs_types.h | 1 + fs/xfs/xfs_bio_io.c | 35 +++ fs/xfs/xfs_buf.c | 2 +- fs/xfs/xfs_buf_item.c | 39 ++-- fs/xfs/xfs_dquot_item.c | 2 +- fs/xfs/xfs_file.c | 20 +- fs/xfs/xfs_inode.c | 10 +- fs/xfs/xfs_inode_item.c | 18 +- fs/xfs/xfs_inode_item.h | 2 +- fs/xfs/xfs_linux.h | 2 + fs/xfs/xfs_log.c | 1015 +++++++++++++++++++++++++++++++++++++++--------------------------------------------- fs/xfs/xfs_log.h | 66 ++---- fs/xfs/xfs_log_cil.c | 822 ++++++++++++++++++++++++++++++++++++++++++++++++++------------------ fs/xfs/xfs_log_priv.h | 114 +++++----- fs/xfs/xfs_super.c | 13 +- fs/xfs/xfs_super.h | 1 - fs/xfs/xfs_sysfs.c | 1 + fs/xfs/xfs_trace.c | 1 + fs/xfs/xfs_trans.c | 18 +- fs/xfs/xfs_trans.h | 5 +- fs/xfs/xfs_trans_ail.c | 11 +- fs/xfs/xfs_trans_priv.h | 3 +- include/linux/cpuhotplug.h | 1 + 25 files changed, 1603 insertions(+), 964 deletions(-)Signature · 2 lines
Dave Chinner [email protected]
Quoted 63 lines · Darrick J. Wong
Quoted 58 lines · Darrick J. Wong
Quoted 4 lines · Dave Chinner
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
I tried that and threw the series at fstests, which crashed all VMs with the following null pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 731060 Comm: mount Not tainted 5.13.0-rc4-djwx #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:xlog_cil_init+0x2f7/0x370 [xfs] Code: b4 7e a0 bf 1c 00 00 00 e8 c6 3b 8d e0 85 c0 78 0c c6 05 13 7f 12 00 01 e9 7b fd ff ff 4 2 48 c7 c6 f8 bf 7f a0 <48> 8b 39 e8 f0 24 04 00 31 ff b9 fc 05 00 00 48 c7 c2 d9 b3 7e a0 RSP: 0018:ffffc9000776bcd0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000fffffff0 RSI: ffffffffa07fbff8 RDI: 00000000ffffffff RBP: ffff888004cf3c00 R08: ffffffffa078fb40 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000048 R12: ffff888052810000 R13: 0000607f81c0b0f8 R14: ffff888004a09c00 R15: ffff888004a09c00 FS: 00007fd2e4486840(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000528e5004 CR4: 00000000001706a0 Call Trace: xlog_alloc_log+0x51f/0x5f0 [xfs] xfs_log_mount+0x55/0x340 [xfs] xfs_mountfs+0x4e4/0x9f0 [xfs] xfs_fs_fill_super+0x4dd/0x7a0 [xfs] ? suffix_kstrtoint.constprop.0+0xe0/0xe0 [xfs] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 ? capable+0x2f/0x50 path_mount+0x6fb/0xa90 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd2e46e8dde Code: 48 8b 0d b5 80 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 82 80 0c 00 f7 d8 64 89 01 48
I'm pretty sure that's due to:
if (!xlog_cil_pcp_init) { int ret; ret = cpuhp_setup_state_nocalls(CPUHP_XFS_CIL_DEAD, "xfs/cil_pcp:dead", NULL, xlog_cil_pcp_dead); if (ret < 0) { xfs_warn(cil->xc_log->l_mp, "Failed to initialise CIL hotplug, error %d. XFS is non-functional.", ret);Quoted 1 line
Because we haven't set
cil->xc_logyet.And having now fixed that, I get tons of:
Quoted 7 lines
XFS (sda): Failed to initialise CIL hotplug, error -16. XFS is non-functional.
XFS: Assertion failed: 0, file:fs/xfs/xfs_log_cil.c, line: 1532------------[ cut here ]------------ WARNING: CPU: 2 PID: 113983 at fs/xfs/xfs_message.c:112 assfail+0x3c/0x40 [xfs] Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_REDIREBUSY??
Can you attach your .config so I can try to reproduce this? I'm guessing that it's an artifact of CONFIG_XFS=m or something else being built as a module because I use monolothic kernels on my test VMs and, obviously, haven't seen a single failure here...
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
Quoted 70 lines · Dave Chinner
Quoted 69 lines · Darrick J. Wong
Quoted 58 lines · Darrick J. Wong
Quoted 4 lines · Dave Chinner
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
I tried that and threw the series at fstests, which crashed all VMs with the following null pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 731060 Comm: mount Not tainted 5.13.0-rc4-djwx #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:xlog_cil_init+0x2f7/0x370 [xfs] Code: b4 7e a0 bf 1c 00 00 00 e8 c6 3b 8d e0 85 c0 78 0c c6 05 13 7f 12 00 01 e9 7b fd ff ff 4 2 48 c7 c6 f8 bf 7f a0 <48> 8b 39 e8 f0 24 04 00 31 ff b9 fc 05 00 00 48 c7 c2 d9 b3 7e a0 RSP: 0018:ffffc9000776bcd0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000fffffff0 RSI: ffffffffa07fbff8 RDI: 00000000ffffffff RBP: ffff888004cf3c00 R08: ffffffffa078fb40 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000048 R12: ffff888052810000 R13: 0000607f81c0b0f8 R14: ffff888004a09c00 R15: ffff888004a09c00 FS: 00007fd2e4486840(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000528e5004 CR4: 00000000001706a0 Call Trace: xlog_alloc_log+0x51f/0x5f0 [xfs] xfs_log_mount+0x55/0x340 [xfs] xfs_mountfs+0x4e4/0x9f0 [xfs] xfs_fs_fill_super+0x4dd/0x7a0 [xfs] ? suffix_kstrtoint.constprop.0+0xe0/0xe0 [xfs] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 ? capable+0x2f/0x50 path_mount+0x6fb/0xa90 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd2e46e8dde Code: 48 8b 0d b5 80 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 82 80 0c 00 f7 d8 64 89 01 48
I'm pretty sure that's due to:
if (!xlog_cil_pcp_init) { int ret; ret = cpuhp_setup_state_nocalls(CPUHP_XFS_CIL_DEAD, "xfs/cil_pcp:dead", NULL, xlog_cil_pcp_dead); if (ret < 0) { xfs_warn(cil->xc_log->l_mp, "Failed to initialise CIL hotplug, error %d. XFS is non-functional.", ret);Quoted 1 line
Because we haven't set
cil->xc_logyet.And having now fixed that, I get tons of:
XFS (sda): Failed to initialise CIL hotplug, error -16. XFS is non-functional.
XFS: Assertion failed: 0, file:fs/xfs/xfs_log_cil.c, line: 1532------------[ cut here ]------------ WARNING: CPU: 2 PID: 113983 at fs/xfs/xfs_message.c:112 assfail+0x3c/0x40 [xfs] Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_REDIR
Quoted 6 lines
Quoted 1 line
EBUSY??
Can you attach your .config so I can try to reproduce this? I'm guessing that it's an artifact of
CONFIG_XFS=mor something else being built as a module because I use monolothic kernels on my test VMs and, obviously, haven't seen a single failure here...
Will do.
--D
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.13.0-rc4 Kernel Configuration
#CONFIG_CC_VERSION_TEXT="x86_64-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0" CONFIG_CC_IS_GCC=yCONFIG_GCC_VERSION=100200CONFIG_CLANG_VERSION=0CONFIG_AS_IS_GNU=yCONFIG_AS_VERSION=23400CONFIG_LD_IS_BFD=yCONFIG_LD_VERSION=23400CONFIG_LLD_VERSION=0CONFIG_CC_CAN_LINK=yCONFIG_CC_CAN_LINK_STATIC=yCONFIG_CC_HAS_ASM_GOTO=yCONFIG_CC_HAS_ASM_INLINE=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_TABLE_SORT=yCONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not setCONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_BUILD_SALT=""CONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_HAVE_KERNEL_LZ4=yCONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not setCONFIG_KERNEL_LZ4=y
# CONFIG_KERNEL_ZSTD is not setCONFIG_DEFAULT_INIT=""CONFIG_DEFAULT_HOSTNAME="mtr.djwong.org"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not setCONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not setCONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#CONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_MIGRATION=yCONFIG_HARDIRQS_SW_RESEND=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_HIERARCHY=yCONFIG_GENERIC_MSI_IRQ=yCONFIG_GENERIC_MSI_IRQ_DOMAIN=yCONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=yCONFIG_GENERIC_IRQ_RESERVATION_MODE=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_INIT=yCONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=yCONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not setCONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=yCONFIG_HAVE_EBPF_JIT=yCONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#CONFIG_BPF_SYSCALL=yCONFIG_BPF_JIT=yCONFIG_BPF_JIT_ALWAYS_ON=yCONFIG_BPF_JIT_DEFAULT_ON=yCONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_COUNT=yCONFIG_PREEMPTION=yCONFIG_PREEMPT_DYNAMIC=y
#
# CPU/Task time and stats accounting
#CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not setCONFIG_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_SCHED_AVG_IRQ=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=yCONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not setCONFIG_SRCU=yCONFIG_TREE_SRCU=yCONFIG_TASKS_RCU_GENERIC=yCONFIG_TASKS_RCU=yCONFIG_TASKS_RUDE_RCU=yCONFIG_TASKS_TRACE_RCU=yCONFIG_RCU_STALL_COMMON=yCONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not setCONFIG_LOG_BUF_SHIFT=17CONFIG_LOG_CPU_MAX_BUF_SHIFT=12CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=yCONFIG_CC_HAS_INT128=yCONFIG_ARCH_SUPPORTS_INT128=yCONFIG_NUMA_BALANCING=yCONFIG_NUMA_BALANCING_DEFAULT_ENABLED=yCONFIG_CGROUPS=yCONFIG_PAGE_COUNTER=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=yCONFIG_MEMCG_KMEM=yCONFIG_BLK_CGROUP=yCONFIG_CGROUP_WRITEBACK=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not setCONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not setCONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_DEVICE is not setCONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not setCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_TIME_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not setCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not setCONFIG_RD_LZ4=yCONFIG_RD_ZSTD=yCONFIG_BOOT_CONFIG=yCONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_LD_ORPHAN_WARN=yCONFIG_SYSCTL=yCONFIG_HAVE_UID16=yCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_EXPERT=yCONFIG_UID16=yCONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not setCONFIG_FHANDLE=yCONFIG_POSIX_TIMERS=yCONFIG_PRINTK=yCONFIG_PRINTK_NMI=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_FUTEX_PI=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_IO_URING=yCONFIG_ADVISE_SYSCALLS=yCONFIG_HAVE_ARCH_USERFAULTFD_WP=yCONFIG_HAVE_ARCH_USERFAULTFD_MINOR=yCONFIG_MEMBARRIER=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_ABSOLUTE_PERCPU=yCONFIG_KALLSYMS_BASE_RELATIVE=yCONFIG_USERFAULTFD=yCONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_KCMP is not set
# CONFIG_RSEQ is not set
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_SLAB_MERGE_DEFAULT=yCONFIG_SLAB_FREELIST_RANDOM=yCONFIG_SLAB_FREELIST_HARDENED=yCONFIG_SHUFFLE_PAGE_ALLOCATOR=yCONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_MMU=yCONFIG_ARCH_MMAP_RND_BITS_MIN=28CONFIG_ARCH_MMAP_RND_BITS_MAX=32CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16CONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_FILTER_PGPROT=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ARCH_WANT_GENERAL_HUGETLB=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_X86_64_SMP=yCONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_PGTABLE_LEVELS=4CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_FEATURE_NAMES=y CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
# CONFIG_RETPOLINE is not set
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set # CONFIG_IOSF_MBI is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set CONFIG_PARAVIRT_SPINLOCKS=y CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not setCONFIG_KVM_GUEST=y CONFIG_ARCH_CPUIDLE_HALTPOLL=yCONFIG_PVH=y CONFIG_PARAVIRT_TIME_ACCOUNTING=y CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not setCONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_IA32_FEAT_CTL=y CONFIG_X86_VMX_FEATURE_NAMES=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_HYGON is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_ZHAOXIN is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not set CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 CONFIG_NR_CPUS_DEFAULT=64CONFIG_NR_CPUS=16CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set # CONFIG_X86_MCE is not set
#
# Performance monitoring
#CONFIG_PERF_EVENTS_INTEL_UNCORE=y
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
CONFIG_X86_VSYSCALL_EMULATION=y CONFIG_X86_IOPL_IOPERM=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set CONFIG_X86_MSR=yCONFIG_X86_CPUID=m
# CONFIG_X86_5LEVEL is not set CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set CONFIG_X86_64_ACPI_NUMA=yCONFIG_NUMA_EMU=yCONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
# CONFIG_X86_UMIP is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set # CONFIG_X86_SGX is not set
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_KEXEC_FILE=y CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set # CONFIG_LEGACY_VSYSCALL_XONLY is not set CONFIG_LEGACY_VSYSCALL_NONE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="systemd.unified_cgroup_hierarchy=1" # CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=yCONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=yCONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#CONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not setCONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=yCONFIG_PM_AUTOSLEEP=yCONFIG_PM_WAKELOCKS=yCONFIG_PM_WAKELOCKS_LIMIT=100CONFIG_PM_WAKELOCKS_GC=yCONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not setCONFIG_ARCH_SUPPORTS_ACPI=yCONFIG_ACPI=yCONFIG_ACPI_LEGACY_TABLES_LOOKUP=yCONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=yCONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
# CONFIG_ACPI_FPDT is not setCONFIG_ACPI_LPIT=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not setCONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not setCONFIG_ACPI_CPU_FREQ_PSS=yCONFIG_ACPI_PROCESSOR_CSTATE=yCONFIG_ACPI_PROCESSOR_IDLE=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not setCONFIG_ACPI_CUSTOM_DSDT_FILE=""CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=yCONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not setCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not setCONFIG_ACPI_NFIT=y
# CONFIG_NFIT_SECURITY_DEBUG is not setCONFIG_ACPI_NUMA=yCONFIG_ACPI_HMAT=yCONFIG_HAVE_ACPI_APEI=yCONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_PMIC_OPREGION is not setCONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPU Idle
#CONFIG_CPU_IDLE=yCONFIG_CPU_IDLE_GOV_LADDER=yCONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not setCONFIG_CPU_IDLE_GOV_HALTPOLL=yCONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#CONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
# CONFIG_ISA_DMA_API is not setCONFIG_AMD_NB=yCONFIG_X86_SYSFB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not setCONFIG_COMPAT_32=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#CONFIG_EDD=y
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not setCONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not setCONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver # end of Firmware Drivers
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not setCONFIG_AS_AVX512=yCONFIG_AS_SHA1_NI=yCONFIG_AS_SHA256_NI=yCONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#CONFIG_CRASH_CORE=yCONFIG_KEXEC_CORE=yCONFIG_HOTPLUG_SMT=yCONFIG_GENERIC_ENTRY=yCONFIG_KPROBES=yCONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=yCONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_HAS_SET_DIRECT_MAP=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=yCONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_HAVE_ARCH_STACKLEAK=y CONFIG_HAVE_STACKPROTECTOR=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y CONFIG_LTO_NONE=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOVE_PUD=y CONFIG_HAVE_MOVE_PMD=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y CONFIG_HAVE_ARCH_HUGE_VMAP=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=28 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y CONFIG_HAVE_STACK_VALIDATION=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y # CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_ARCH_HAS_MEM_ENCRYPT=y CONFIG_HAVE_STATIC_CALL=y CONFIG_HAVE_STATIC_CALL_INLINE=y CONFIG_HAVE_PREEMPT_DYNAMIC=y CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=yCONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=yCONFIG_BLOCK=yCONFIG_BLK_SCSI_REQUEST=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=y CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set CONFIG_BLK_WBT=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set CONFIG_BLK_WBT_MQ=yCONFIG_BLK_DEBUG_FS=yCONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=yCONFIG_BLK_MQ_PCI=yCONFIG_BLK_MQ_VIRTIO=yCONFIG_BLK_PM=y
#
# IO Schedulers
#CONFIG_MQ_IOSCHED_DEADLINE=yCONFIG_MQ_IOSCHED_KYBER=mCONFIG_IOSCHED_BFQ=m
# CONFIG_BFQ_GROUP_IOSCHED is not set
# end of IO Schedulers
CONFIG_UNINLINE_SPIN_UNLOCK=yCONFIG_ARCH_SUPPORTS_ATOMIC_RMW=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_RWSEM_SPIN_ON_OWNER=yCONFIG_LOCK_SPIN_ON_OWNER=yCONFIG_ARCH_USE_QUEUED_SPINLOCKS=yCONFIG_QUEUED_SPINLOCKS=yCONFIG_ARCH_USE_QUEUED_RWLOCKS=yCONFIG_QUEUED_RWLOCKS=yCONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=yCONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=yCONFIG_ARCH_HAS_SYSCALL_WRAPPER=yCONFIG_FREEZER=y
#
# Executable file formats
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_BINFMT_SCRIPT=yCONFIG_BINFMT_MISC=mCONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#CONFIG_SELECT_MEMORY_MODEL=yCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_HAVE_FAST_GUP=yCONFIG_NUMA_KEEP_MEMINFO=yCONFIG_MEMORY_ISOLATION=yCONFIG_HAVE_BOOTMEM_INFO_NODE=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_MEMORY_HOTREMOVE=yCONFIG_MHP_MEMMAP_ON_MEMORY=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=yCONFIG_MEMORY_BALLOON=yCONFIG_BALLOON_COMPACTION=yCONFIG_COMPACTION=yCONFIG_PAGE_REPORTING=yCONFIG_MIGRATION=yCONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=yCONFIG_ARCH_ENABLE_THP_MIGRATION=yCONFIG_CONTIG_ALLOC=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_VIRT_TO_BUS=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=65536CONFIG_TRANSPARENT_HUGEPAGE=yCONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not setCONFIG_ARCH_WANTS_THP_SWAP=yCONFIG_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not setCONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not setCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_ARCH_HAS_PTE_DEVMAP=yCONFIG_ZONE_DEVICE=yCONFIG_DEV_PAGEMAP_OPS=y
# CONFIG_DEVICE_PRIVATE is not set
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not setCONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=yCONFIG_SKB_EXTENSIONS=y
#
# Networking options
#CONFIG_PACKET=mCONFIG_PACKET_DIAG=mCONFIG_UNIX=yCONFIG_UNIX_SCM=yCONFIG_UNIX_DIAG=y
# CONFIG_TLS is not setCONFIG_XFRM=yCONFIG_XFRM_ALGO=mCONFIG_XFRM_USER=m
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not setCONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_XDP_SOCKETS is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not setCONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_MPTCP is not setCONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not setCONFIG_NETFILTER=yCONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not setCONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not setCONFIG_NF_CONNTRACK=m
# CONFIG_NF_LOG_SYSLOG is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not setCONFIG_NF_NAT=mCONFIG_NF_NAT_REDIRECT=y
# CONFIG_NF_TABLES is not setCONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XTABLES_COMPAT is not set
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not setCONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_HMARK is not set # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set # CONFIG_NETFILTER_XT_TARGET_LOG is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
# CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set # CONFIG_NETFILTER_XT_TARGET_TEE is not set # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=mCONFIG_IP_SET_MAX=256
# CONFIG_IP_SET_BITMAP_IP is not set
# CONFIG_IP_SET_BITMAP_IPMAC is not set
# CONFIG_IP_SET_BITMAP_PORT is not setCONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
# CONFIG_IP_SET_HASH_IPPORT is not set
# CONFIG_IP_SET_HASH_IPPORTIP is not set
# CONFIG_IP_SET_HASH_IPPORTNET is not set
# CONFIG_IP_SET_HASH_IPMAC is not setCONFIG_IP_SET_HASH_MAC=m
# CONFIG_IP_SET_HASH_NETPORTNET is not setCONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
# CONFIG_IP_SET_HASH_NETPORT is not set
# CONFIG_IP_SET_HASH_NETIFACE is not set
# CONFIG_IP_SET_LIST_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not setCONFIG_NF_REJECT_IPV4=mCONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not setCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_SYNPROXY is not setCONFIG_IP_NF_NAT=m
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_IP_NF_TARGET_NETMAP is not setCONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not setCONFIG_NF_REJECT_IPV6=m
# CONFIG_NF_LOG_IPV6 is not setCONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_MATCH_SRH is not setCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_NAT is not set
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not setCONFIG_STP=mCONFIG_BRIDGE=mCONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not setCONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not setCONFIG_NET_SCH_CODEL=mCONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not setCONFIG_NET_SCH_FQ=m
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not setCONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not setCONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not setCONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not setCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not setCONFIG_PCPU_DEV_REFCNT=yCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_SOCK_RX_QUEUE_MAPPING=yCONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not setCONFIG_NET_RX_BUSY_POLL=yCONFIG_BQL=yCONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing # end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not setCONFIG_GRO_CELLS=yCONFIG_NET_SOCK_MSG=yCONFIG_FAILOVER=yCONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#CONFIG_HAVE_EISA=y
# CONFIG_EISA is not setCONFIG_HAVE_PCI=yCONFIG_PCI=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not setCONFIG_PCIE_PME=y
# CONFIG_PCIE_PTM is not setCONFIG_PCI_MSI=yCONFIG_PCI_MSI_IRQ_DOMAIN=yCONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not setCONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_P2PDMA is not setCONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not setCONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not setCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# PCI controller drivers
#
# CONFIG_VMD is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support # end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER=yCONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not setCONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#CONFIG_FW_LOADER=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_CACHE is not set
# end of Firmware loader
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not setCONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not setCONFIG_GENERIC_CPU_AUTOPROBE=yCONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not setCONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=yCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
#
# ECC engine support
#
# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# end of ECC engine support # end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_UBI=mCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not setCONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not setCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_NULL_BLK=mCONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not setCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#CONFIG_NVME_CORE=mCONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline #
# end of Texas Instruments shared transport line discipline
#
# Altera FPGA firmware download module (requires I2C) #
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set CONFIG_PVPANIC=yCONFIG_PVPANIC_MMIO=mCONFIG_PVPANIC_PCI=m
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_BLK_DEV_SR=yCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not setCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not setCONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not setCONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support
# CONFIG_ATA is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set CONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=mCONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not setCONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m
# CONFIG_DM_RAID is not set CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set CONFIG_DM_DELAY=mCONFIG_DM_DUST=m
# CONFIG_DM_INIT is not set CONFIG_DM_UEVENT=yCONFIG_DM_FLAKEY=m
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set CONFIG_DM_LOG_WRITES=m CONFIG_DM_INTEGRITY=m
# CONFIG_DM_ZONED is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not setCONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
# CONFIG_ETHERNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support #
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
# CONFIG_WWAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not setCONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
# CONFIG_NVM is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not setCONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports # end of Input device support
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not setCONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=48 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not setCONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not setCONFIG_TTY_PRINTK=yCONFIG_TTY_PRINTK_LEVEL=6CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_BA431 is not set
# CONFIG_HW_RANDOM_VIA is not setCONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not setCONFIG_DEVMEM=yCONFIG_NVRAM=m
# CONFIG_RAW_DRIVER is not set
# CONFIG_DEVPORT is not setCONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# end of Character devices
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not setCONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 # CONFIG_THERMAL_WRITABLE_TRIPS is not set CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not setCONFIG_X86_THERMAL_VECTOR=y
# CONFIG_X86_PKG_TEMP_THERMAL is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# end of Intel thermal drivers
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not setCONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_MADERA is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_DUMMY_CONSOLE=yCONFIG_DUMMY_CONSOLE_COLUMNS=80CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support # end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not setCONFIG_HIDRAW=y
# CONFIG_UHID is not setCONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support # end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not setCONFIG_EDAC_ATOMIC_SCRUB=yCONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not setCONFIG_RTC_LIB=yCONFIG_RTC_MC146818_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_SYSTOHC=yCONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not setCONFIG_RTC_NVMEM=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# SPI and I2C RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not setCONFIG_VIRTIO=yCONFIG_VIRTIO_PCI_LIB=yCONFIG_VIRTIO_MENU=yCONFIG_VIRTIO_PCI=yCONFIG_VIRTIO_PCI_LEGACY=yCONFIG_VIRTIO_PMEM=mCONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MEM is not setCONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not setCONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_AMD_PMC is not set
# CONFIG_ADV_SWBUTTON is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_SYSTEM76_ACPI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not setCONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not setCONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_PRO3_BUTTON is not setCONFIG_HAVE_CLK=yCONFIG_CLKDEV_LOOKUP=yCONFIG_HAVE_CLK_PREPARE=yCONFIG_COMMON_CLK=y
# CONFIG_XILINX_VCU is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#CONFIG_CLKEVT_I8253=yCONFIG_I8253_LOCK=yCONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=yCONFIG_BLK_DEV_PMEM=mCONFIG_ND_BLK=yCONFIG_ND_CLAIM=yCONFIG_ND_BTT=yCONFIG_BTT=yCONFIG_ND_PFN=mCONFIG_NVDIMM_PFN=yCONFIG_NVDIMM_DAX=yCONFIG_DAX_DRIVER=yCONFIG_DAX=yCONFIG_DEV_DAX=mCONFIG_DEV_DAX_PMEM=mCONFIG_DEV_DAX_KMEM=mCONFIG_DEV_DAX_PMEM_COMPAT=mCONFIG_NVMEM=yCONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=yCONFIG_VALIDATE_FS_PARSER=yCONFIG_FS_IOMAP=yCONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT3_FS is not setCONFIG_EXT4_FS=mCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_EXT4_DEBUG=yCONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_XFS_FS=mCONFIG_XFS_SUPPORT_V4=yCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_ONLINE_SCRUB=yCONFIG_XFS_ONLINE_REPAIR=yCONFIG_XFS_DEBUG=y
# CONFIG_XFS_ASSERT_FATAL is not set
# CONFIG_GFS2_FS is not setCONFIG_OCFS2_FS=mCONFIG_OCFS2_FS_O2CB=mCONFIG_OCFS2_FS_STATS=yCONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not setCONFIG_BTRFS_FS=mCONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not setCONFIG_F2FS_FS=mCONFIG_F2FS_STAT_FS=yCONFIG_F2FS_FS_XATTR=yCONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
# CONFIG_ZONEFS_FS is not setCONFIG_FS_DAX=yCONFIG_FS_DAX_PMD=yCONFIG_FS_POSIX_ACL=yCONFIG_EXPORTFS=yCONFIG_EXPORTFS_BLOCK_OPS=yCONFIG_FILE_LOCKING=yCONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not setCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not setCONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=mCONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not setCONFIG_FUSE_FS=m
# CONFIG_CUSE is not setCONFIG_VIRTIO_FS=mCONFIG_FUSE_DAX=yCONFIG_OVERLAY_FS=mCONFIG_OVERLAY_FS_REDIRECT_DIR=yCONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=yCONFIG_OVERLAY_FS_INDEX=yCONFIG_OVERLAY_FS_NFS_EXPORT=yCONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not setCONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not setCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_PROC_CHILDREN=yCONFIG_PROC_PID_ARCH_STATUS=yCONFIG_KERNFS=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_TMPFS_XATTR=yCONFIG_TMPFS_INODE64=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_MEMFD_CREATE=yCONFIG_ARCH_HAS_GIGANTIC_PAGE=yCONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set CONFIG_UBIFS_FS_LZO=yCONFIG_UBIFS_FS_ZLIB=yCONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set CONFIG_UBIFS_FS_XATTR=y CONFIG_UBIFS_FS_SECURITY=y
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not setCONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V2=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=yCONFIG_NFS_V4_2=yCONFIG_PNFS_FILE_LAYOUT=mCONFIG_PNFS_BLOCK=m CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set CONFIG_NFS_USE_LEGACY_DNS=y CONFIG_NFS_DEBUG=y CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set CONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_NFSD_PNFS=yCONFIG_NFSD_BLOCKLAYOUT=y CONFIG_NFSD_SCSILAYOUT=y CONFIG_NFSD_FLEXFILELAYOUT=y CONFIG_NFSD_V4_2_INTER_SSC=y CONFIG_GRACE_PERIOD=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_ACL_SUPPORT=yCONFIG_NFS_COMMON=y CONFIG_NFS_V4_2_SSC_HELPER=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
# CONFIG_UNICODE is not setCONFIG_IO_WQ=y
# end of File systems
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_PAGE_TABLE_ISOLATION is not set CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y CONFIG_HARDENED_USERCOPY=yCONFIG_HARDENED_USERCOPY_FALLBACK=y CONFIG_HARDENED_USERCOPY_PAGESPAN=yCONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
#
# Kernel hardening options
#
#
# Memory initialization
#CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set # CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set # CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization # end of Kernel hardening options # end of Security options
CONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_SKCIPHER=yCONFIG_CRYPTO_SKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=mCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_AKCIPHER2=yCONFIG_CRYPTO_KPP2=yCONFIG_CRYPTO_ACOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not setCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not setCONFIG_CRYPTO_CURVE25519_X86=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set
#
# Block modes
#CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not setCONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not setCONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=yCONFIG_CRYPTO_CRC32=yCONFIG_CRYPTO_CRC32_PCLMUL=yCONFIG_CRYPTO_XXHASH=mCONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not setCONFIG_CRYPTO_CRCT10DIF=yCONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not setCONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set # CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#CONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not setCONFIG_CRYPTO_ZSTD=m
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=mCONFIG_CRYPTO_DRBG_MENU=mCONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not setCONFIG_CRYPTO_DRBG=mCONFIG_CRYPTO_JITTERENTROPY=mCONFIG_CRYPTO_USER_API=mCONFIG_CRYPTO_USER_API_HASH=mCONFIG_CRYPTO_USER_API_SKCIPHER=mCONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not setCONFIG_CRYPTO_USER_API_AEAD=mCONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=yCONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#CONFIG_CRYPTO_LIB_AES=y
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
# CONFIG_CRYPTO_LIB_CHACHA is not setCONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=mCONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
# CONFIG_CRYPTO_LIB_CURVE25519 is not setCONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not setCONFIG_CRYPTO_LIB_SHA256=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_RAID6_PQ=mCONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not setCONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_NET_UTILS=yCONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not setCONFIG_RATIONAL=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_ARCH_USE_CMPXCHG_LOCKREF=yCONFIG_ARCH_HAS_FAST_MULTIPLIER=yCONFIG_ARCH_USE_SYM_ANNOTATIONS=y
# CONFIG_CRC_CCITT is not setCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not setCONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not setCONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_LZ4_DECOMPRESS=yCONFIG_ZSTD_COMPRESS=mCONFIG_ZSTD_DECOMPRESS=yCONFIG_XZ_DEC=yCONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not setCONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_LZ4=yCONFIG_DECOMPRESS_ZSTD=yCONFIG_INTERVAL_TREE=yCONFIG_XARRAY_MULTI=yCONFIG_ASSOCIATIVE_ARRAY=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT_MAP=yCONFIG_HAS_DMA=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_ARCH_DMA_ADDR_T_64BIT=yCONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not setCONFIG_SGL_ALLOC=yCONFIG_CPU_RMAP=yCONFIG_DQL=yCONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not setCONFIG_NLATTR=y
# CONFIG_IRQ_POLL is not setCONFIG_OID_REGISTRY=mCONFIG_HAVE_GENERIC_VDSO=yCONFIG_GENERIC_GETTIMEOFDAY=yCONFIG_GENERIC_VDSO_TIME_NS=yCONFIG_SG_POOL=yCONFIG_ARCH_HAS_PMEM_API=yCONFIG_MEMREGION=yCONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=yCONFIG_ARCH_HAS_COPY_MC=yCONFIG_ARCH_STACKWALK=yCONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options # CONFIG_PRINTK_TIME=y # CONFIG_PRINTK_CALLER is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DYNAMIC_DEBUG_CORE is not set CONFIG_SYMBOLIC_ERRNAME=y CONFIG_DEBUG_BUGVERBOSE=y # end of printk and dmesg options
#
# Compile-time checks and compiler options
#CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set # CONFIG_DEBUG_INFO_DWARF4 is not set CONFIG_DEBUG_INFO_DWARF5=y
# CONFIG_GDB_SCRIPTS is not set CONFIG_FRAME_WARN=1600 CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set CONFIG_STACK_VALIDATION=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#CONFIG_MAGIC_SYSRQ=yCONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1CONFIG_MAGIC_SYSRQ_SERIAL=yCONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""CONFIG_DEBUG_FS=yCONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=yCONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not setCONFIG_CC_HAS_UBSAN_BOUNDS=yCONFIG_UBSAN_BOUNDS=yCONFIG_UBSAN_ONLY_BOUNDS=yCONFIG_UBSAN_SHIFT=yCONFIG_UBSAN_DIV_ZERO=yCONFIG_UBSAN_BOOL=yCONFIG_UBSAN_ENUM=y
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_TEST_UBSAN is not setCONFIG_HAVE_ARCH_KCSAN=y
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not setCONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not setCONFIG_ARCH_HAS_DEBUG_WX=yCONFIG_DEBUG_WX=yCONFIG_GENERIC_PTDUMP=yCONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not setCONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not setCONFIG_DEBUG_STACK_USAGE=yCONFIG_SCHED_STACK_END_CHECK=yCONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not setCONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not setCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not setCONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not setCONFIG_HAVE_ARCH_KASAN=yCONFIG_HAVE_ARCH_KASAN_VMALLOC=yCONFIG_CC_HAS_KASAN_GENERIC=yCONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not setCONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0CONFIG_PANIC_TIMEOUT=0CONFIG_LOCKUP_DETECTOR=yCONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_HARDLOCKUP_DETECTOR_PERF=yCONFIG_HARDLOCKUP_CHECK_TIMESTAMP=yCONFIG_HARDLOCKUP_DETECTOR=yCONFIG_BOOTPARAM_HARDLOCKUP_PANIC=yCONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1CONFIG_DETECT_HUNG_TASK=yCONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#CONFIG_SCHED_DEBUG=yCONFIG_SCHED_INFO=yCONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not setCONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not setCONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not setCONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not setCONFIG_STACKTRACE=yCONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not setCONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not setCONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set CONFIG_LATENCYTOP=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_OBJTOOL_MCOUNT=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACE_CLOCK=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=yCONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_BOOTTIME_TRACING=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
# CONFIG_FUNCTION_PROFILER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set CONFIG_FTRACE_SYSCALLS=y
# CONFIG_TRACER_SNAPSHOT is not set CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set CONFIG_BLK_DEV_IO_TRACE=y CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set CONFIG_UPROBE_EVENTS=yCONFIG_BPF_EVENTS=yCONFIG_DYNAMIC_EVENTS=y CONFIG_PROBE_EVENTS=y CONFIG_BPF_KPROBE_OVERRIDE=y CONFIG_FTRACE_MCOUNT_RECORD=y CONFIG_FTRACE_MCOUNT_USE_CC=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set # CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set CONFIG_SAMPLE_TRACE_EVENTS=m CONFIG_SAMPLE_TRACE_PRINTK=m
# CONFIG_SAMPLE_FTRACE_DIRECT is not set
# CONFIG_SAMPLE_TRACE_ARRAY is not set CONFIG_SAMPLE_KOBJECT=m CONFIG_SAMPLE_KPROBES=m CONFIG_SAMPLE_KRETPROBES=m
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_CONFIGFS is not set
# CONFIG_SAMPLE_WATCHDOG is not set CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y CONFIG_STRICT_DEVMEM=y CONFIG_IO_STRICT_DEVMEM=y
#
# x86 Debugging # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_EARLY_PRINTK_USB_XDBC is not set # CONFIG_DEBUG_TLBFLUSH is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y # CONFIG_X86_DECODER_SELFTEST is not set # CONFIG_IO_DELAY_0X80 is not set CONFIG_IO_DELAY_0XED=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # CONFIG_DEBUG_ENTRY is not set # CONFIG_DEBUG_NMI_SELFTEST is not set # CONFIG_X86_DEBUG_FPU is not set # CONFIG_PUNIT_ATOM_DEBUG is not set CONFIG_UNWINDER_ORC=y # CONFIG_UNWINDER_FRAME_POINTER is not set # CONFIG_UNWINDER_GUESS is not set # end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not setCONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not setCONFIG_ARCH_HAS_KCOV=yCONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not setCONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage # end of Kernel hacking
Quoted 63 lines · Darrick J. Wong
Quoted 58 lines · Darrick J. Wong
Quoted 4 lines · Dave Chinner
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
I tried that and threw the series at fstests, which crashed all VMs with the following null pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 731060 Comm: mount Not tainted 5.13.0-rc4-djwx #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:xlog_cil_init+0x2f7/0x370 [xfs] Code: b4 7e a0 bf 1c 00 00 00 e8 c6 3b 8d e0 85 c0 78 0c c6 05 13 7f 12 00 01 e9 7b fd ff ff 4 2 48 c7 c6 f8 bf 7f a0 <48> 8b 39 e8 f0 24 04 00 31 ff b9 fc 05 00 00 48 c7 c2 d9 b3 7e a0 RSP: 0018:ffffc9000776bcd0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000fffffff0 RSI: ffffffffa07fbff8 RDI: 00000000ffffffff RBP: ffff888004cf3c00 R08: ffffffffa078fb40 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000048 R12: ffff888052810000 R13: 0000607f81c0b0f8 R14: ffff888004a09c00 R15: ffff888004a09c00 FS: 00007fd2e4486840(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000528e5004 CR4: 00000000001706a0 Call Trace: xlog_alloc_log+0x51f/0x5f0 [xfs] xfs_log_mount+0x55/0x340 [xfs] xfs_mountfs+0x4e4/0x9f0 [xfs] xfs_fs_fill_super+0x4dd/0x7a0 [xfs] ? suffix_kstrtoint.constprop.0+0xe0/0xe0 [xfs] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 ? capable+0x2f/0x50 path_mount+0x6fb/0xa90 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd2e46e8dde Code: 48 8b 0d b5 80 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 82 80 0c 00 f7 d8 64 89 01 48
I'm pretty sure that's due to:
if (!xlog_cil_pcp_init) { int ret; ret = cpuhp_setup_state_nocalls(CPUHP_XFS_CIL_DEAD, "xfs/cil_pcp:dead", NULL, xlog_cil_pcp_dead); if (ret < 0) { xfs_warn(cil->xc_log->l_mp, "Failed to initialise CIL hotplug, error %d. XFS is non-functional.", ret);Quoted 1 line
Because we haven't set
cil->xc_logyet.And having now fixed that, I get tons of:
Quoted 7 lines
XFS (sda): Failed to initialise CIL hotplug, error -16. XFS is non-functional.
XFS: Assertion failed: 0, file:fs/xfs/xfs_log_cil.c, line: 1532------------[ cut here ]------------ WARNING: CPU: 2 PID: 113983 at fs/xfs/xfs_message.c:112 assfail+0x3c/0x40 [xfs] Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_REDIREBUSY??
Ok, so EBUSY implies a setup race - multiple filesystems are trying to run the init code at the same time. That seems somewhat unlikely, but regardless what I'm going to do is move this setup/teardown to the XFS module init functions rather than do it in the CIL.
i.e. turn this into a generic XFS filesystem hotplug infrastructure in xfs_super.c and call out to xlog_cil_pcp_dead() from there.
This way we are guaranteed a single init call when the module is inserted, and a single destroy call when the module is removed. That should solve all these issues.
How do you want me to handle these changes? Just send out the replacement patches for the code that is alread in the branch for review, then resend a rebased pull-req after review? Or something else? I don't really want to keep bombing the mailing list with 40 emails every time I need to get fixes for a single patch reviewed...
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
Quoted 84 lines · Dave Chinner
Quoted 63 lines · Darrick J. Wong
Quoted 58 lines · Darrick J. Wong
Quoted 4 lines · Dave Chinner
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
I tried that and threw the series at fstests, which crashed all VMs with the following null pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 731060 Comm: mount Not tainted 5.13.0-rc4-djwx #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:xlog_cil_init+0x2f7/0x370 [xfs] Code: b4 7e a0 bf 1c 00 00 00 e8 c6 3b 8d e0 85 c0 78 0c c6 05 13 7f 12 00 01 e9 7b fd ff ff 4 2 48 c7 c6 f8 bf 7f a0 <48> 8b 39 e8 f0 24 04 00 31 ff b9 fc 05 00 00 48 c7 c2 d9 b3 7e a0 RSP: 0018:ffffc9000776bcd0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000fffffff0 RSI: ffffffffa07fbff8 RDI: 00000000ffffffff RBP: ffff888004cf3c00 R08: ffffffffa078fb40 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000048 R12: ffff888052810000 R13: 0000607f81c0b0f8 R14: ffff888004a09c00 R15: ffff888004a09c00 FS: 00007fd2e4486840(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000528e5004 CR4: 00000000001706a0 Call Trace: xlog_alloc_log+0x51f/0x5f0 [xfs] xfs_log_mount+0x55/0x340 [xfs] xfs_mountfs+0x4e4/0x9f0 [xfs] xfs_fs_fill_super+0x4dd/0x7a0 [xfs] ? suffix_kstrtoint.constprop.0+0xe0/0xe0 [xfs] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 ? capable+0x2f/0x50 path_mount+0x6fb/0xa90 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd2e46e8dde Code: 48 8b 0d b5 80 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 82 80 0c 00 f7 d8 64 89 01 48
I'm pretty sure that's due to:
if (!xlog_cil_pcp_init) { int ret; ret = cpuhp_setup_state_nocalls(CPUHP_XFS_CIL_DEAD, "xfs/cil_pcp:dead", NULL, xlog_cil_pcp_dead); if (ret < 0) { xfs_warn(cil->xc_log->l_mp, "Failed to initialise CIL hotplug, error %d. XFS is non-functional.", ret);Quoted 1 line
Because we haven't set
cil->xc_logyet.And having now fixed that, I get tons of:
Quoted 7 lines
XFS (sda): Failed to initialise CIL hotplug, error -16. XFS is non-functional.
XFS: Assertion failed: 0, file:fs/xfs/xfs_log_cil.c, line: 1532------------[ cut here ]------------ WARNING: CPU: 2 PID: 113983 at fs/xfs/xfs_message.c:112 assfail+0x3c/0x40 [xfs] Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_REDIREBUSY??
Ok, so EBUSY implies a setup race - multiple filesystems are trying to run the init code at the same time. That seems somewhat unlikely, but regardless what I'm going to do is move this setup/teardown to the XFS module init functions rather than do it in the CIL.
i.e. turn this into a generic XFS filesystem hotplug infrastructure in
xfs_super.cand call out toxlog_cil_pcp_dead()from there.This way we are guaranteed a single init call when the module is inserted, and a single destroy call when the module is removed. That should solve all these issues.
Quoted 5 lines
How do you want me to handle these changes? Just send out the replacement patches for the code that is alread in the branch for review, then resend a rebased pull-req after review? Or something else? I don't really want to keep bombing the mailing list with 40 emails every time I need to get fixes for a single patch reviewed...
I've tested the two patches that will appear as replies to this mail as the replacement for the one hotplug infrastructure patch in the original series. I've tested it against modular XFS builds, and it doesn't cause any problems here. Essentially the first patch splits out the XFS hotplug infrastructure, the second is the CIL functionality for handling dead CPU notifications.
If they work for you, I'll rebase the branch for you to reconstruct the for-next tree with the fixes in it...
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
PATCH 1/2 xfs: introduce CPU hotplug infrastructure
From: Dave Chinner <[email protected]>
We need to move to per-cpu state for CIL tracking, but to do that we need to handle CPUs being removed from the system by the hot-plug code. Introduce generic XFS infrastructure to handle CPU hotplug events that is set up at module init time and torn down at module exit time.
Initially, the CIL only needs CPU dead notifications, so we only set up a callback for these notifications. The infrastructure can be updated in future for CPU add notifications easily if every needed.
--- fs/xfs/xfs_super.c | 38 +++++++++++++++++++++++++++++++++++++- include/linux/cpuhotplug.h | 1 + 2 files changed, 38 insertions(+), 1 deletion(-)
fs/xfs/xfs_super.c +37 -1
@@ -2123,6 +2123,35 @@ xfs_destroy_workqueues(void)destroy_workqueue (xfs_alloc_wq); } +static int +xfs_cpu_dead ( +unsigned int cpu) +{ +return 0 ; +} + +static int __init +xfs_cpu_hotplug_init (void ) +{ +int error; + + error =cpuhp_setup_state_nocalls (CPUHP_XFS_DEAD , +"xfs:dead" ,NULL , + xfs_cpu_dead); +if (error <0 ) { +xfs_alert (NULL , +"Failed to initialise CPU hotplug, error %d. XFS is non-functional." , + error); + } +return error; +} + +static void +xfs_cpu_hotplug_destroy (void ) +{ +cpuhp_remove_state_nocalls (CPUHP_XFS_DEAD ); +} + STATIC int __initinit_xfs_fs (void ) {
@@ -2135,10 +2164,14 @@ init_xfs_fs(void)xfs_dir_startup (); - error =xfs_init_zones (); + error =xfs_cpu_hotplug_init ();if (error) goto out; + error =xfs_init_zones (); +if (error) + goto out_destroy_hp; + error =xfs_init_workqueues ();if (error) goto out_destroy_zones;
@@ -2218,6 +2251,8 @@ init_xfs_fs(void)xfs_destroy_workqueues (); out_destroy_zones:xfs_destroy_zones (); + out_destroy_hp: +xfs_cpu_hotplug_destroy (); out:return error; }
@@ -2240,6 +2275,7 @@ exit_xfs_fs(void)xfs_destroy_workqueues ();xfs_destroy_zones ();xfs_uuid_table_free (); +xfs_cpu_hotplug_destroy (); }module_init (init_xfs_fs);
include/linux/cpuhotplug.h +1 -0
@@ -52,6 +52,7 @@ enum cpuhp_state {CPUHP_FS_BUFF_DEAD ,CPUHP_PRINTK_DEAD ,CPUHP_MM_MEMCQ_DEAD , +CPUHP_XFS_DEAD ,CPUHP_PERCPU_CNT_DEAD ,CPUHP_RADIX_DEAD , CPUHP_PAGE_ALLOC_DEAD,
Re: [PATCH 1/2] xfs: introduce CPU hotplug infrastructure
Quoted 9 lines · Dave Chinner
From: Dave Chinner <[email protected]>
We need to move to per-cpu state for CIL tracking, but to do that we need to handle CPUs being removed from the system by the hot-plug code. Introduce generic XFS infrastructure to handle CPU hotplug events that is set up at module init time and torn down at module exit time.
Quoted 5 lines
Initially, the CIL only needs CPU dead notifications, so we only set up a callback for these notifications. The infrastructure can be updated in future for CPU add notifications easily if every needed.
Signed-off-by Dave Chinner <[email protected]>
Looks good,
--D
Quoted 90 lines
--- fs/xfs/xfs_super.c | 38 +++++++++++++++++++++++++++++++++++++- include/linux/cpuhotplug.h | 1 + 2 files changed, 38 insertions(+), 1 deletion(-)fs/xfs/xfs_super.c +37
-1@@ -2123,6 +2123,35 @@ xfs_destroy_workqueues(void)destroy_workqueue (xfs_alloc_wq); } +static int +xfs_cpu_dead ( +unsigned int cpu) +{ +return 0 ; +} + +static int __init +xfs_cpu_hotplug_init (void ) +{ +int error; + + error =cpuhp_setup_state_nocalls (CPUHP_XFS_DEAD , +"xfs:dead" ,NULL , + xfs_cpu_dead); +if (error <0 ) { +xfs_alert (NULL , +"Failed to initialise CPU hotplug, error %d. XFS is non-functional." , + error); + } +return error; +} + +static void +xfs_cpu_hotplug_destroy (void ) +{ +cpuhp_remove_state_nocalls (CPUHP_XFS_DEAD ); +} + STATIC int __initinit_xfs_fs (void ) {@@ -2135,10 +2164,14 @@ init_xfs_fs(void)xfs_dir_startup (); - error =xfs_init_zones (); + error =xfs_cpu_hotplug_init ();if (error) goto out; + error =xfs_init_zones (); +if (error) + goto out_destroy_hp; + error =xfs_init_workqueues ();if (error) goto out_destroy_zones;@@ -2218,6 +2251,8 @@ init_xfs_fs(void)xfs_destroy_workqueues (); out_destroy_zones:xfs_destroy_zones (); + out_destroy_hp: +xfs_cpu_hotplug_destroy (); out:return error; }@@ -2240,6 +2275,7 @@ exit_xfs_fs(void)xfs_destroy_workqueues ();xfs_destroy_zones ();xfs_uuid_table_free (); +xfs_cpu_hotplug_destroy (); }module_init (init_xfs_fs);include/linux/cpuhotplug.h +1
-0@@ -52,6 +52,7 @@ enum cpuhp_state {CPUHP_FS_BUFF_DEAD ,CPUHP_PRINTK_DEAD ,CPUHP_MM_MEMCQ_DEAD , +CPUHP_XFS_DEAD ,CPUHP_PERCPU_CNT_DEAD ,CPUHP_RADIX_DEAD , CPUHP_PAGE_ALLOC_DEAD,
PATCH 2/2 xfs: introduce per-cpu CIL tracking structure
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
The CIL push lock is highly contended on larger machines, becoming a hard bottleneck that about 700,000 transaction commits/s on >16p machines. To address this, start moving the CIL tracking infrastructure to utilise per-CPU structures.
We need to track the space used, the amount of log reservation space reserved to write the CIL, the log items in the CIL and the busy extents that need to be completed by the CIL commit. This requires a couple of per-cpu counters, an unordered per-cpu list and a globally ordered per-cpu list.
Create a per-cpu structure to hold these and all the management interfaces needed, as well as the hooks to handle hotplug CPUs.
--- fs/xfs/xfs_log_cil.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++- fs/xfs/xfs_log_priv.h | 22 +++++++++++++ fs/xfs/xfs_super.c | 1 + 3 files changed, 113 insertions(+), 1 deletion(-)
fs/xfs/xfs_log_cil.c +90 -1
@@ -1369,6 +1369,88 @@ xfs_log_item_in_current_chkpt(return lip->li_seq == cil->xc_ctx->sequence; } +#ifdef CONFIG_HOTPLUG_CPU +static LIST_HEAD (xlog_cil_pcp_list); +static DEFINE_SPINLOCK (xlog_cil_pcp_lock); + +/* +* Move dead percpu state to the relevant CIL context structures. +* +* We have to lock the CIL context here to ensure that nothing is modifying +* the percpu state, either addition or removal. Both of these are done under +* the CIL context lock, so grabbing that exclusively here will ensure we can +* safely drain the cilpcp for the CPU that is dying. +*/ +void +xlog_cil_pcp_dead ( +unsigned int cpu) +{ +struct xfs_cil *cil, *n; + +spin_lock (&xlog_cil_pcp_lock); +list_for_each_entry_safe (cil, n, &xlog_cil_pcp_list, xc_pcp_list) { +spin_unlock (&xlog_cil_pcp_lock); +down_write (&cil->xc_ctx_lock); +/* move stuff on dead CPU to context */ +up_write (&cil->xc_ctx_lock); +spin_lock (&xlog_cil_pcp_lock); + } +spin_unlock (&xlog_cil_pcp_lock); +} + +static int +xlog_cil_pcp_hpadd ( +struct xfs_cil *cil) +{ +INIT_LIST_HEAD (&cil->xc_pcp_list); +spin_lock (&xlog_cil_pcp_lock); +list_add (&cil->xc_pcp_list, &xlog_cil_pcp_list); +spin_unlock (&xlog_cil_pcp_lock); +return 0 ; +} + +static void +xlog_cil_pcp_hpremove ( +struct xfs_cil *cil) +{ +spin_lock (&xlog_cil_pcp_lock); +list_del (&cil->xc_pcp_list); +spin_unlock (&xlog_cil_pcp_lock); +} + +#else /* !CONFIG_HOTPLUG_CPU */ +static inline int xlog_cil_pcp_hpadd (struct xfs_cil *cil) {return 0 ; } +static inline void xlog_cil_pcp_hpremove (struct xfs_cil *cil) {} +#endif + +static void __percpu * +xlog_cil_pcp_alloc ( +struct xfs_cil *cil) +{ +void __percpu *pcp; + + pcp = alloc_percpu(struct xlog_cil_pcp); +if (!pcp) +return NULL ; + +if (xlog_cil_pcp_hpadd (cil) <0 ) { +free_percpu (pcp); +return NULL ; + } +return pcp; +} + +static void +xlog_cil_pcp_free ( +struct xfs_cil *cil, +void __percpu *pcp) +{ +if (!pcp) +return ; +xlog_cil_pcp_hpremove (cil); +free_percpu (pcp); +} +/* * Perform initial CIL structure initialisation. */
@@ -1383,6 +1465,13 @@ xlog_cil_init(if (!cil)return -ENOMEM ; + cil->xc_log = log; + cil->xc_pcp =xlog_cil_pcp_alloc (cil); +if (!cil->xc_pcp) { +kmem_free (cil); +return -ENOMEM ; + } +INIT_LIST_HEAD (&cil->xc_cil);INIT_LIST_HEAD (&cil->xc_committing);spin_lock_init (&cil->xc_cil_lock);
@@ -1390,7 +1479,6 @@ xlog_cil_init(init_waitqueue_head (&cil->xc_push_wait);init_rwsem (&cil->xc_ctx_lock);init_waitqueue_head (&cil->xc_commit_wait); - cil->xc_log = log; log->l_cilp = cil; ctx =xlog_cil_ctx_alloc ();
@@ -1413,6 +1501,7 @@ xlog_cil_destroy(ASSERT (list_empty (&cil->xc_cil));ASSERT (test_bit (XLOG_CIL_EMPTY , &cil->xc_flags)); +xlog_cil_pcp_free (cil, cil->xc_pcp);kmem_free (cil); }
fs/xfs/xfs_log_priv.h +22 -0
@@ -227,6 +227,14 @@ struct xfs_cil_ctx {struct work_struct push_work; }; +/* +* Per-cpu CIL tracking items +*/ +struct xlog_cil_pcp { +struct list_head busy_extents; +struct list_head log_items; +}; +/* * Committed Item List structure *
@@ -260,6 +268,11 @@ struct xfs_cil {wait_queue_head_t xc_commit_wait;xfs_csn_t xc_current_sequence;wait_queue_head_t xc_push_wait;/* background push throttle */ + +void __percpu *xc_pcp;/* percpu CIL structures */ +#ifdef CONFIG_HOTPLUG_CPU +struct list_head xc_pcp_list; +#endif }____cacheline_aligned_in_smp ;/* xc_flags bit values */
@@ -625,4 +638,13 @@ xlog_valid_lsn( return valid; } +/* +* CIL CPU dead notifier +*/ +#ifdef CONFIG_HOTPLUG_CPU +void xlog_cil_pcp_dead (unsigned int cpu); +#else +static inline void xlog_cil_pcp_dead (unsigned int cpu) {} +#endif /* CONFIG_HOTPLUG_CPU */ +#endif /* __XFS_LOG_PRIV_H__ */
fs/xfs/xfs_super.c +1 -0
@@ -2127,6 +2127,7 @@ static intxfs_cpu_dead ( unsigned int cpu) { +xlog_cil_pcp_dead (cpu);return 0 ; }
Quoted 98 lines · Dave Chinner
Quoted 84 lines · Dave Chinner
Quoted 63 lines · Darrick J. Wong
Quoted 58 lines · Darrick J. Wong
Quoted 4 lines · Dave Chinner
Hi Darrick,
Can you please pull the CIL and log improvements from the tag listed below?
I tried that and threw the series at fstests, which crashed all VMs with the following null pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 731060 Comm: mount Not tainted 5.13.0-rc4-djwx #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:xlog_cil_init+0x2f7/0x370 [xfs] Code: b4 7e a0 bf 1c 00 00 00 e8 c6 3b 8d e0 85 c0 78 0c c6 05 13 7f 12 00 01 e9 7b fd ff ff 4 2 48 c7 c6 f8 bf 7f a0 <48> 8b 39 e8 f0 24 04 00 31 ff b9 fc 05 00 00 48 c7 c2 d9 b3 7e a0 RSP: 0018:ffffc9000776bcd0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000fffffff0 RSI: ffffffffa07fbff8 RDI: 00000000ffffffff RBP: ffff888004cf3c00 R08: ffffffffa078fb40 R09: 0000000000000000 R10: 000000000000000c R11: 0000000000000048 R12: ffff888052810000 R13: 0000607f81c0b0f8 R14: ffff888004a09c00 R15: ffff888004a09c00 FS: 00007fd2e4486840(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000528e5004 CR4: 00000000001706a0 Call Trace: xlog_alloc_log+0x51f/0x5f0 [xfs] xfs_log_mount+0x55/0x340 [xfs] xfs_mountfs+0x4e4/0x9f0 [xfs] xfs_fs_fill_super+0x4dd/0x7a0 [xfs] ? suffix_kstrtoint.constprop.0+0xe0/0xe0 [xfs] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 ? capable+0x2f/0x50 path_mount+0x6fb/0xa90 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd2e46e8dde Code: 48 8b 0d b5 80 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 82 80 0c 00 f7 d8 64 89 01 48
I'm pretty sure that's due to:
if (!xlog_cil_pcp_init) { int ret; ret = cpuhp_setup_state_nocalls(CPUHP_XFS_CIL_DEAD, "xfs/cil_pcp:dead", NULL, xlog_cil_pcp_dead); if (ret < 0) { xfs_warn(cil->xc_log->l_mp, "Failed to initialise CIL hotplug, error %d. XFS is non-functional.", ret);Quoted 1 line
Because we haven't set
cil->xc_logyet.And having now fixed that, I get tons of:
Quoted 7 lines
XFS (sda): Failed to initialise CIL hotplug, error -16. XFS is non-functional.
XFS: Assertion failed: 0, file:fs/xfs/xfs_log_cil.c, line: 1532------------[ cut here ]------------ WARNING: CPU: 2 PID: 113983 at fs/xfs/xfs_message.c:112 assfail+0x3c/0x40 [xfs] Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_REDIREBUSY??
Ok, so EBUSY implies a setup race - multiple filesystems are trying to run the init code at the same time. That seems somewhat unlikely, but regardless what I'm going to do is move this setup/teardown to the XFS module init functions rather than do it in the CIL.
i.e. turn this into a generic XFS filesystem hotplug infrastructure in
xfs_super.cand call out toxlog_cil_pcp_dead()from there.This way we are guaranteed a single init call when the module is inserted, and a single destroy call when the module is removed. That should solve all these issues.
Quoted 5 lines
How do you want me to handle these changes? Just send out the replacement patches for the code that is alread in the branch for review, then resend a rebased pull-req after review? Or something else? I don't really want to keep bombing the mailing list with 40 emails every time I need to get fixes for a single patch reviewed...
I've tested the two patches that will appear as replies to this mail as the replacement for the one hotplug infrastructure patch in the original series. I've tested it against modular XFS builds, and it doesn't cause any problems here. Essentially the first patch splits out the XFS hotplug infrastructure, the second is the CIL functionality for handling dead CPU notifications.
Quoted 2 lines
If they work for you, I'll rebase the branch for you to reconstruct the for-next tree with the fixes in it...
All tests pass now, so the new patches look good.
--D
Quoted 7 lines
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]