riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT
PATCH 1/1 riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT
The doc says CONFIG_SKIP_LOWLEVEL_INIT is in ax25-ae350.h, while actually it is not. Remove it.
Signed-off-by Bin Meng <[email protected]>
---
doc/board/AndesTech/ax25-ae350.rst | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-)
doc/board/AndesTech/ax25-ae350.rst +4 -15
@@ -58,15 +58,6 @@ Platform Level Interrupt Controller (PLIC) - Configurable number of targets: 1-16 - Preempted interrupt priority stack -Configurations --------------- - -CONFIG_SKIP_LOWLEVEL_INIT: - -If you want to boot this system from SPI ROM and bypass e-bios (the -other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT -in "include/configs/ax25-ae350.h". - Build and boot steps --------------------
@@ -89,12 +80,10 @@ Verification: Steps ----- -1. Define CONFIG_SKIP_LOWLEVEL_INIT to build u-boot which is loaded via gdb from ram. -2. Undefine CONFIG_SKIP_LOWLEVEL_INIT to build u-boot which is booted from spi rom. -3. Ping a server by mac driver -4. Scan sd card and copy u-boot image which is booted from flash to ram by sd driver. -5. Burn this u-boot image to spi rom by spi driver -6. Re-boot u-boot from spi flash with power off and power on. +1. Ping a server by mac driver +2. Scan sd card and copy u-boot image which is booted from flash to ram by sd driver +3. Burn this u-boot image to spi rom by spi driver +4. Re-boot u-boot from spi flash with power off and power on Messages of U-Boot boot on AE350 board --------------------------------------
Signature · 1 line
2.25.1
A message that is not in the archive (sent off-list or not yet received): [email protected]
Rick Chen
Reviewed-byQuoted 6 lines
From: Bin Meng <[email protected]>
Sent: Saturday, June 05, 2021 7:01 AM
To: Rick Jian-Zhi Chen(陳建志) <[email protected]>; Leo Yu-Chi Liang(梁育齊) <[email protected]>; [email protected]
Cc: Bin Meng <[email protected]>
Subject: [PATCH] riscv: ae350: doc: RemoveCONFIG_SKIP_LOWLEVEL_INIT
Quoted 7 lines
The doc says
CONFIG_SKIP_LOWLEVEL_INITis inax25-ae350.h, while actually it is not. Remove it.Signed-off-by Bin Meng <[email protected]>---
doc/board/AndesTech/ax25-ae350.rst | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-)
Reviewed-by Rick Chen <[email protected]>