Support ROCKCHIP SPI new feature
Subsystems (3)
v6 cover Support ROCKCHIP SPI new feature
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding information
Changes in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126
Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]
Jon Lin (6):
dt-bindings: spi: spi-rockchip: add description for rv1126
spi: rockchip: add compatible string for rv1126
spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
spi: rockchip: Wait for STB status in slave mode tx_xfer
spi: rockchip: Support cs-gpio
spi: rockchip: Support SPI_CS_HIGH
.../devicetree/bindings/spi/spi-rockchip.yaml | 1 + drivers/spi/spi-rockchip.c | 95 +++++++++++++++---- 2 files changed, 80 insertions(+), 16 deletions(-)
Signature · 1 line
2.17.1
PATCH v6 1/6 dt-bindings: spi: spi-rockchip: add description for rv1126
The description below will be used for rv1126.dtsi or compatible one in the future
---
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding information
Changes in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126
Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]
Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -34,6 +34,7 @@ properties: - rockchip,rk3368-spi - rockchip,rk3399-spi - const: rockchip,rk3066-spi + - const: rockchip,rv1126-spi reg: maxItems: 1
Signature · 1 line
2.17.1
Re: [PATCH v6 1/6] dt-bindings: spi: spi-rockchip: add description for rv1126
Quoted 19 lines · Jon Lin
The description below will be used for
rv1126.dtsior compatible one in the futureSigned-off-by Jon Lin <[email protected]>---
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding informationChanges in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Quoted 6 lines
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Re: [PATCH v6 1/6] dt-bindings: spi: spi-rockchip: add description for rv1126
Hi Rob,
Similar to the Rockchip SFC discussion this compatible does currently not add any data or difference to the driver. Therefore a simple fallback string will do for now. That in the past that was not strictly enforced, so be it.
Could you have a look at it?
Kind regards,
Johan Jonker
- rockchip,rk3368-spi
- rockchip,rk3399-spi
- rockchip,rv1126-spi
- const: rockchip,rk3066-spi
Quoted 34 lines · Rob Herring
Quoted 19 lines · Jon Lin
The description below will be used for
rv1126.dtsior compatible one in the futureSigned-off-by Jon Lin <[email protected]>---
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding informationChanges in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" contentQuoted 6 lines
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)Acked-by Rob Herring <[email protected]>_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v6 2/6 spi: rockchip: add compatible string for rv1126
In reply to Jon LinAdd compatible string for rv1126 for potential applications.
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 1 + 1 file changed, 1 insertion(+)
drivers/spi/spi-rockchip.c +1 -0
@@ -922,6 +922,7 @@ static const struct of_device_id rockchip_spi_dt_match[] = { { .compatible = "rockchip,rk3368-spi", }, { .compatible = "rockchip,rk3399-spi", }, { .compatible = "rockchip,rv1108-spi", }, + { .compatible = "rockchip,rv1126-spi", }, { }, }; MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match);
Signature · 1 line
2.17.1
PATCH v6 3/6 spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
In reply to Jon LinThe error here is to calculate the width as 8 bits. In fact, 16 bits should be considered.
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/spi/spi-rockchip.c +2 -2
@@ -540,8 +540,8 @@ static int rockchip_spi_config(struct rockchip_spi *rs,* interrupt exactly when the fifo is full doesn't seem to work, * so we need the strict inequality here */ -if (xfer->len < rs->fifo_len) -writel_relaxed (xfer->len -1 , rs->regs +ROCKCHIP_SPI_RXFTLR ); +if ((xfer->len / rs->n_bytes) < rs->fifo_len) +writel_relaxed (xfer->len / rs->n_bytes -1 , rs->regs +ROCKCHIP_SPI_RXFTLR );else writel_relaxed (rs->fifo_len /2 -1 , rs->regs +ROCKCHIP_SPI_RXFTLR );
Signature · 1 line
2.17.1
PATCH v6 4/6 spi: rockchip: Wait for STB status in slave mode tx_xfer
In reply to Jon LinAfter ROCKCHIP_SPI_VER2_TYPE2, SR->STB is a more accurate judgment bit for spi slave transmition.
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/spi/spi-rockchip.c +14 -7
@@ -116,13 +116,14 @@#define BAUDR_SCKDV_MIN 2#define BAUDR_SCKDV_MAX 65534 -/* Bit fields in SR, 5bit */ -#define SR_MASK 0x1f +/* Bit fields in SR, 6bit */ +#define SR_MASK 0x3f#define SR_BUSY (1 << 0)#define SR_TF_FULL (1 << 1)#define SR_TF_EMPTY (1 << 2)#define SR_RF_EMPTY (1 << 3)#define SR_RF_FULL (1 << 4) +#define SR_SLAVE_TX_BUSY (1 << 5)/* Bit fields in ISR, IMR, ISR, RISR, 5bit */ #define INT_MASK 0x1f
@@ -197,13 +198,19 @@ static inline void spi_enable_chip(struct rockchip_spi *rs, bool enable)writel_relaxed ((enable ?1U :0U ), rs->regs +ROCKCHIP_SPI_SSIENR ); } -static inline void wait_for_idle (struct rockchip_spi *rs) +static inline void wait_for_tx_idle (struct rockchip_spi *rs,bool slave_mode) {unsigned long timeout = jiffies +msecs_to_jiffies (5 );do { -if (!(readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_BUSY )) -return ; +if (slave_mode) { +if (!(readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_SLAVE_TX_BUSY ) && + !((readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_BUSY ))) +return ; + }else { +if (!(readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_BUSY )) +return ; + } }while (!time_after (jiffies, timeout));dev_warn (rs->dev,"spi controller is in busy state!\n" );
@@ -383,7 +390,7 @@ static void rockchip_spi_dma_txcb(void *data)return ;/* Wait until the FIFO data completely. */ -wait_for_idle (rs); +wait_for_tx_idle (rs, ctlr->slave);spi_enable_chip (rs, false);spi_finalize_current_transfer (ctlr);
@@ -545,7 +552,7 @@ static int rockchip_spi_config(struct rockchip_spi *rs,else writel_relaxed (rs->fifo_len /2 -1 , rs->regs +ROCKCHIP_SPI_RXFTLR ); -writel_relaxed (rs->fifo_len /2 , rs->regs +ROCKCHIP_SPI_DMATDLR ); +writel_relaxed (rs->fifo_len /2 -1 , rs->regs +ROCKCHIP_SPI_DMATDLR );writel_relaxed (rockchip_spi_calc_burst_size (xfer->len / rs->n_bytes) -1 , rs->regs +ROCKCHIP_SPI_DMARDLR );writel_relaxed (dmacr, rs->regs +ROCKCHIP_SPI_DMACR );
Signature · 1 line
2.17.1
PATCH v6 5/6 spi: rockchip: Support cs-gpio
In reply to Jon Lin1.Add standard cs-gpio support 2.Refer to spi-controller.yaml for details
---
Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None
drivers/spi/spi-rockchip.c | 61 ++++++++++++++++++++++++++++++++++---- 1 file changed, 56 insertions(+), 5 deletions(-)
drivers/spi/spi-rockchip.c +56 -5
@@ -6,6 +6,7 @@#include <linux/clk.h> #include <linux/dmaengine.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h>
@@ -157,7 +158,8 @@*/ #define ROCKCHIP_SPI_MAX_TRANLEN 0xffff -#define ROCKCHIP_SPI_MAX_CS_NUM 2 +/* 2 for native cs, 2 for cs-gpio */ +#define ROCKCHIP_SPI_MAX_CS_NUM 4#define ROCKCHIP_SPI_VER2_TYPE1 0x05EC0002#define ROCKCHIP_SPI_VER2_TYPE2 0x00110002
@@ -191,6 +193,7 @@ struct rockchip_spi {bool cs_asserted[ROCKCHIP_SPI_MAX_CS_NUM ];bool slave_abort; +bool gpio_requested; };static inline void spi_enable_chip (struct rockchip_spi *rs,bool enable)
@@ -245,11 +248,15 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable)/* Keep things powered as long as CS is asserted */ pm_runtime_get_sync (rs->dev); -ROCKCHIP_SPI_SET_BITS (rs->regs +ROCKCHIP_SPI_SER , -BIT (spi->chip_select)); +if (gpio_is_valid (spi->cs_gpio)) +ROCKCHIP_SPI_SET_BITS (rs->regs +ROCKCHIP_SPI_SER ,1 ); +else +ROCKCHIP_SPI_SET_BITS (rs->regs +ROCKCHIP_SPI_SER ,BIT (spi->chip_select)); }else { -ROCKCHIP_SPI_CLR_BITS (rs->regs +ROCKCHIP_SPI_SER , -BIT (spi->chip_select)); +if (gpio_is_valid (spi->cs_gpio)) +ROCKCHIP_SPI_CLR_BITS (rs->regs +ROCKCHIP_SPI_SER ,1 ); +else +ROCKCHIP_SPI_CLR_BITS (rs->regs +ROCKCHIP_SPI_SER ,BIT (spi->chip_select));/* Drop reference from when we first asserted CS */ pm_runtime_put (rs->dev);
@@ -632,6 +639,47 @@ static bool rockchip_spi_can_dma(struct spi_controller *ctlr,return xfer->len / bytes_per_word >= rs->fifo_len; } +static int rockchip_spi_setup (struct spi_device *spi) +{ + +int ret = -EINVAL ; +struct rockchip_spi *rs =spi_controller_get_devdata (spi->controller); + +if (spi->cs_gpio == -ENOENT ) +return 0 ; + +if (!rs->gpio_requested &&gpio_is_valid (spi->cs_gpio)) { + ret =gpio_request_one (spi->cs_gpio, + (spi->mode &SPI_CS_HIGH ) ? +GPIOF_OUT_INIT_LOW :GPIOF_OUT_INIT_HIGH , +dev_name (&spi->dev)); +if (ret) +dev_err (&spi->dev,"can't request chipselect gpio %d\n" , + spi->cs_gpio); +else + rs->gpio_requested = true; + }else { +if (gpio_is_valid (spi->cs_gpio)) { +int mode = ((spi->mode &SPI_CS_HIGH ) ?0 :1 ); + + ret =gpio_direction_output (spi->cs_gpio, mode); +if (ret) +dev_err (&spi->dev,"chipselect gpio %d setup failed (%d)\n" , + spi->cs_gpio, ret); + } + } + +return ret; +} + +static void rockchip_spi_cleanup (struct spi_device *spi) +{ +struct rockchip_spi *rs =spi_controller_get_devdata (spi->controller); + +if (rs->gpio_requested) +gpio_free (spi->cs_gpio); +} +static int rockchip_spi_probe (struct platform_device *pdev) {int ret;
@@ -706,6 +754,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) rs->dev = &pdev->dev; rs->freq =clk_get_rate (rs->spiclk); + rs->gpio_requested = false;if (!of_property_read_u32 (pdev->dev.of_node,"rx-sample-delay-ns" , &rsd_nsecs)) {
@@ -759,6 +808,8 @@ static int rockchip_spi_probe(struct platform_device *pdev) ctlr->max_speed_hz =min (rs->freq /BAUDR_SCKDV_MIN ,MAX_SCLK_OUT ); ctlr->set_cs = rockchip_spi_set_cs; + ctlr->setup = rockchip_spi_setup; + ctlr->cleanup = rockchip_spi_cleanup; ctlr->transfer_one = rockchip_spi_transfer_one; ctlr->max_transfer_size = rockchip_spi_max_transfer_size; ctlr->handle_err = rockchip_spi_handle_err;
Signature · 1 line
2.17.1
PATCH v6 6/6 spi: rockchip: Support SPI_CS_HIGH
1.Add standard spi-cs-high support
2.Refer to spi-controller.yaml for details
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/spi/spi-rockchip.c +6 -2
@@ -108,6 +108,8 @@#define CR0_OPM_MASTER 0x0#define CR0_OPM_SLAVE 0x1 +#define CR0_SOI_OFFSET 23 +#define CR0_MTM_OFFSET 0x21/* Bit fields in SER, 2bit */
@@ -238,7 +240,7 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) {struct spi_controller *ctlr = spi->controller;struct rockchip_spi *rs =spi_controller_get_devdata (ctlr); -bool cs_asserted = !enable; +bool cs_asserted = spi->mode &SPI_CS_HIGH ? enable : !enable;/* Return immediately for no-op */ if (cs_asserted == rs->cs_asserted[spi->chip_select])
@@ -509,6 +511,8 @@ static int rockchip_spi_config(struct rockchip_spi *rs, cr0 |= (spi->mode &0x3U ) <<CR0_SCPH_OFFSET ;if (spi->mode &SPI_LSB_FIRST ) cr0 |=CR0_FBM_LSB <<CR0_FBM_OFFSET ; +if (spi->mode &SPI_CS_HIGH ) + cr0 |=BIT (spi->chip_select) <<CR0_SOI_OFFSET ;if (xfer->rx_buf && xfer->tx_buf) cr0 |=CR0_XFM_TR <<CR0_XFM_OFFSET ;
@@ -787,7 +791,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) ctlr->auto_runtime_pm = true; ctlr->bus_num = pdev->id; - ctlr->mode_bits =SPI_CPOL |SPI_CPHA |SPI_LOOP |SPI_LSB_FIRST ; + ctlr->mode_bits =SPI_CPOL |SPI_CPHA |SPI_LOOP |SPI_LSB_FIRST |SPI_CS_HIGH ;if (slave_mode) { ctlr->mode_bits |=SPI_NO_CS ; ctlr->slave_abort = rockchip_spi_slave_abort;
Signature · 1 line
2.17.1
v7 cover Support ROCKCHIP SPI new feature
In reply to Jon LinChanges in v7:
- Fall back "rockchip,rv1126-spi" to "rockchip,rk3066-spi"
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding information
Changes in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126
Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]
Jon Lin (6):
dt-bindings: spi: spi-rockchip: add description for rv1126
spi: rockchip: add compatible string for rv1126
spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
spi: rockchip: Wait for STB status in slave mode tx_xfer
spi: rockchip: Support cs-gpio
spi: rockchip: Support SPI_CS_HIGH
.../devicetree/bindings/spi/spi-rockchip.yaml | 1 + drivers/spi/spi-rockchip.c | 95 +++++++++++++++---- 2 files changed, 80 insertions(+), 16 deletions(-)
Signature · 1 line
2.17.1
PATCH v7 1/6 dt-bindings: spi: spi-rockchip: add description for rv1126
The description below will be used for rv1126.dtsi or compatible one in the future
---
Changes in v7:
- Fall back "rockchip,rv1126-spi" to "rockchip,rk3066-spi"
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding information
Changes in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126
Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]
Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -33,6 +33,7 @@ properties: - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi + - rockchip,rv1126-spi - const: rockchip,rk3066-spi reg:
Signature · 1 line
2.17.1
Re: [PATCH v7 1/6] dt-bindings: spi: spi-rockchip: add description for rv1126
Quoted 23 lines · Jon Lin
The description below will be used for
rv1126.dtsior compatible one in the futureSigned-off-by Jon Lin <[email protected]>---
Changes in v7:
- Fall back "rockchip,rv1126-spi" to "rockchip,rk3066-spi"Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in Series-changes v5, so the commit massage should also remove the corresponding informationChanges in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible with rv1126Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Quoted 5 lines
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
PATCH v7 2/6 spi: rockchip: add compatible string for rv1126
In reply to Jon LinAdd compatible string for rv1126 for potential applications.
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 1 + 1 file changed, 1 insertion(+)
drivers/spi/spi-rockchip.c +1 -0
@@ -922,6 +922,7 @@ static const struct of_device_id rockchip_spi_dt_match[] = { { .compatible = "rockchip,rk3368-spi", }, { .compatible = "rockchip,rk3399-spi", }, { .compatible = "rockchip,rv1108-spi", }, + { .compatible = "rockchip,rv1126-spi", }, { }, }; MODULE_DEVICE_TABLE(of, rockchip_spi_dt_match);
Signature · 1 line
2.17.1
PATCH v7 3/6 spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
In reply to Jon LinThe error here is to calculate the width as 8 bits. In fact, 16 bits should be considered.
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/spi/spi-rockchip.c +2 -2
@@ -540,8 +540,8 @@ static int rockchip_spi_config(struct rockchip_spi *rs,* interrupt exactly when the fifo is full doesn't seem to work, * so we need the strict inequality here */ -if (xfer->len < rs->fifo_len) -writel_relaxed (xfer->len -1 , rs->regs +ROCKCHIP_SPI_RXFTLR ); +if ((xfer->len / rs->n_bytes) < rs->fifo_len) +writel_relaxed (xfer->len / rs->n_bytes -1 , rs->regs +ROCKCHIP_SPI_RXFTLR );else writel_relaxed (rs->fifo_len /2 -1 , rs->regs +ROCKCHIP_SPI_RXFTLR );
Signature · 1 line
2.17.1
PATCH v7 4/6 spi: rockchip: Wait for STB status in slave mode tx_xfer
In reply to Jon LinAfter ROCKCHIP_SPI_VER2_TYPE2, SR->STB is a more accurate judgment bit for spi slave transmition.
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/spi/spi-rockchip.c +14 -7
@@ -116,13 +116,14 @@#define BAUDR_SCKDV_MIN 2#define BAUDR_SCKDV_MAX 65534 -/* Bit fields in SR, 5bit */ -#define SR_MASK 0x1f +/* Bit fields in SR, 6bit */ +#define SR_MASK 0x3f#define SR_BUSY (1 << 0)#define SR_TF_FULL (1 << 1)#define SR_TF_EMPTY (1 << 2)#define SR_RF_EMPTY (1 << 3)#define SR_RF_FULL (1 << 4) +#define SR_SLAVE_TX_BUSY (1 << 5)/* Bit fields in ISR, IMR, ISR, RISR, 5bit */ #define INT_MASK 0x1f
@@ -197,13 +198,19 @@ static inline void spi_enable_chip(struct rockchip_spi *rs, bool enable)writel_relaxed ((enable ?1U :0U ), rs->regs +ROCKCHIP_SPI_SSIENR ); } -static inline void wait_for_idle (struct rockchip_spi *rs) +static inline void wait_for_tx_idle (struct rockchip_spi *rs,bool slave_mode) {unsigned long timeout = jiffies +msecs_to_jiffies (5 );do { -if (!(readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_BUSY )) -return ; +if (slave_mode) { +if (!(readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_SLAVE_TX_BUSY ) && + !((readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_BUSY ))) +return ; + }else { +if (!(readl_relaxed (rs->regs +ROCKCHIP_SPI_SR ) &SR_BUSY )) +return ; + } }while (!time_after (jiffies, timeout));dev_warn (rs->dev,"spi controller is in busy state!\n" );
@@ -383,7 +390,7 @@ static void rockchip_spi_dma_txcb(void *data)return ;/* Wait until the FIFO data completely. */ -wait_for_idle (rs); +wait_for_tx_idle (rs, ctlr->slave);spi_enable_chip (rs, false);spi_finalize_current_transfer (ctlr);
@@ -545,7 +552,7 @@ static int rockchip_spi_config(struct rockchip_spi *rs,else writel_relaxed (rs->fifo_len /2 -1 , rs->regs +ROCKCHIP_SPI_RXFTLR ); -writel_relaxed (rs->fifo_len /2 , rs->regs +ROCKCHIP_SPI_DMATDLR ); +writel_relaxed (rs->fifo_len /2 -1 , rs->regs +ROCKCHIP_SPI_DMATDLR );writel_relaxed (rockchip_spi_calc_burst_size (xfer->len / rs->n_bytes) -1 , rs->regs +ROCKCHIP_SPI_DMARDLR );writel_relaxed (dmacr, rs->regs +ROCKCHIP_SPI_DMACR );
Signature · 1 line
2.17.1