clk: qcom: add support for SM8350 DISPCC

Add support to the SM8350 display clock controller by extending the SM8250 display clock controller, which is almost identical but has some minor differences.

Signed-off-by Jonathan Marek <[email protected]>

---
v3:
- added const to vco tables
- moved clk rcgs/div list to global scope
- patching clks on module init instead of probe
- lowercase hex
- update configure comment
- rebased on added edp clocks

 drivers/clk/qcom/Kconfig         |   4 +-
 drivers/clk/qcom/dispcc-sm8250.c | 103 ++++++++++++++++++++++++++-----
 2 files changed, 90 insertions(+), 17 deletions(-)

drivers/clk/qcom/Kconfig +2 -2

index 45646b867cdb..cc60e6ee1654 100644
@@ -484,11 +484,11 @@ config SDX_GCC_55
          SPI, I2C, USB, SD/UFS, PCIe etc.
 
 config SM_DISPCC_8250
-       tristate "SM8150 and SM8250 Display Clock Controller"
+       tristate "SM8150/SM8250/SM8350 Display Clock Controller"
        depends on SM_GCC_8150 || SM_GCC_8250
        help
          Support for the display clock controller on Qualcomm Technologies, Inc
-         SM8150 and SM8250 devices.
+         SM8150/SM8250/SM8350 devices.
          Say Y if you want to support display devices and functionality such as
          splash screen.
 

drivers/clk/qcom/dispcc-sm8250.c +37 -15

index 601c7c0ba483..86c474a51cd2 100644
@@ -34,10 +34,14 @@ enum {
        P_DSI1_PHY_PLL_OUT_DSICLK,
 };
 
-static struct pll_vco vco_table[] = {
+static const struct pll_vco vco_table[] = {
        { 249600000, 2000000000, 0 },
 };
 
+static const struct pll_vco lucid_5lpe_vco[] = {
+       { 249600000, 1750000000, 0 },
+};
+
 static struct alpha_pll_config disp_cc_pll0_config = {
        .l = 0x47,
        .alpha = 0xE000,

@@ -1222,6 +1226,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
        { .compatible = "qcom,sc8180x-dispcc" },
        { .compatible = "qcom,sm8150-dispcc" },
        { .compatible = "qcom,sm8250-dispcc" },
+       { .compatible = "qcom,sm8350-dispcc" },
        { }
 };
 MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);

@@ -1234,20 +1239,10 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
        if (IS_ERR(regmap))
                return PTR_ERR(regmap);
 
-       /* note: trion == lucid, except for the prepare() op */
-       BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
-       if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
-           of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
-               disp_cc_pll0_config.config_ctl_hi_val = 0x00002267;
-               disp_cc_pll0_config.config_ctl_hi1_val = 0x00000024;
-               disp_cc_pll0_config.user_ctl_hi1_val = 0x000000D0;
-               disp_cc_pll0_init.ops = &clk_alpha_pll_trion_ops;
-               disp_cc_pll1_config.config_ctl_hi_val = 0x00002267;
-               disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
-               disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
-               disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
-       }
-
+       /* sm8350 note: downstream has a clk_lucid_5lpe_pll_configure, which
+        * does not write the PLL_UPDATE_BYPASS bit in PLL_MODE.
+        * It should not hurt sm8350 to have this extra write.
+        */
        clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
        clk_lucid_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
 

@@ -1268,8 +1263,86 @@ static struct platform_driver disp_cc_sm8250_driver = {
        },
 };
 
+static struct clk_rcg2 * const __initconst disp_cc_sm8250_rcgs[] = {
+       &disp_cc_mdss_byte0_clk_src,
+       &disp_cc_mdss_byte1_clk_src,
+       &disp_cc_mdss_dp_aux1_clk_src,
+       &disp_cc_mdss_dp_aux_clk_src,
+       &disp_cc_mdss_dp_link1_clk_src,
+       &disp_cc_mdss_dp_link_clk_src,
+       &disp_cc_mdss_dp_pixel1_clk_src,
+       &disp_cc_mdss_dp_pixel2_clk_src,
+       &disp_cc_mdss_dp_pixel_clk_src,
+       &disp_cc_mdss_edp_aux_clk_src,
+       &disp_cc_mdss_edp_gtc_clk_src,
+       &disp_cc_mdss_edp_link_clk_src,
+       &disp_cc_mdss_edp_pixel_clk_src,
+       &disp_cc_mdss_esc0_clk_src,
+       &disp_cc_mdss_mdp_clk_src,
+       &disp_cc_mdss_pclk0_clk_src,
+       &disp_cc_mdss_pclk1_clk_src,
+       &disp_cc_mdss_rot_clk_src,
+       &disp_cc_mdss_vsync_clk_src,
+       &disp_cc_mdss_ahb_clk_src,
+};
+
+static struct clk_regmap_div * const __initconst disp_cc_sm8250_divs[] = {
+       &disp_cc_mdss_byte0_div_clk_src,
+       &disp_cc_mdss_byte1_div_clk_src,
+       &disp_cc_mdss_dp_link1_div_clk_src,

drivers/clk/qcom/dispcc-sm8250.c +34 -0

+
 static int __init disp_cc_sm8250_init(void)
 {
+       if (disp_cc_is_compatible("qcom,sm8150-dispcc") ||
+           disp_cc_is_compatible("qcom,sc8180x-dispcc")) {
+               BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
+               disp_cc_pll0_config.config_ctl_hi_val = 0x00002267;
+               disp_cc_pll0_config.config_ctl_hi1_val = 0x00000024;
+               disp_cc_pll0_config.user_ctl_hi1_val = 0x000000d0;
+               disp_cc_pll0_init.ops = &clk_alpha_pll_trion_ops;
+               disp_cc_pll1_config.config_ctl_hi_val = 0x00002267;
+               disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
+               disp_cc_pll1_config.user_ctl_hi1_val = 0x000000d0;
+               disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
+       } else if (disp_cc_is_compatible("qcom,sm8350-dispcc")) {
+               unsigned int i;
+
+               for (i = 0; i < ARRAY_SIZE(disp_cc_sm8250_rcgs); i++)
+                       disp_cc_sm8250_rcgs[i]->cmd_rcgr -= 4;
+
+               for (i = 0; i < ARRAY_SIZE(disp_cc_sm8250_divs); i++) {
+                       disp_cc_sm8250_divs[i]->reg -= 4;
+                       disp_cc_sm8250_divs[i]->width = 4;
+               }
+
+               disp_cc_mdss_ahb_clk.halt_reg -= 4;
+               disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
+
+               disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
+
+               disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
+               disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
+               disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+               disp_cc_pll0.vco_table = lucid_5lpe_vco;
+               disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
+               disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;