Skip to contentSkip to conversation

drm/vc4: fix vc4_atomic_commit_tail() logic

PATCH Applied Mark Rutland 4 participants 4 messages Jun 8, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/vc4: fix vc4_atomic_commit_tail() logic

In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and attempt to wait on any channels which are still in use. When we iterate over the CRTCs, we have:

* i - the index of the CRTC
* channel - the channel a CRTC is using

When we check the channel state, we consult:

old_hvs_state->fifo_state[channel].in_use

... but when we wait for the channel, we erroneously wait on:

old_hvs_state->fifo_state[i].pending_commit

... rather than:

old_hvs_state->fifo_state[channel].pending_commit

... and this bogus access has been observed to result in boot-time hangs on some arm64 configurations, and can be detected using KASAN. FIx this by using the correct index.

I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.

Trimmed KASAN splat:

| ==================================================================
| BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910
| Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7
| CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3
|
| Hardware name: Raspberry Pi 3 Model B (DT)
| Workqueue: events_unbound deferred_probe_work_func
| Call trace:
|  dump_backtrace+0x0/0x2b4
|  show_stack+0x1c/0x30
|  dump_stack+0xfc/0x168
|  print_address_description.constprop.0+0x2c/0x2c0
|  kasan_report+0x1dc/0x240
|  __asan_load8+0x98/0xd4
|  vc4_atomic_commit_tail+0x1cc/0x910
|  commit_tail+0x100/0x210
| ...
|
| Allocated by task 7:
|  kasan_save_stack+0x2c/0x60
|  __kasan_kmalloc+0x90/0xb4
|  vc4_hvs_channels_duplicate_state+0x60/0x1a0
|  drm_atomic_get_private_obj_state+0x144/0x230
|  vc4_atomic_check+0x40/0x73c
|  drm_atomic_check_only+0x998/0xe60
|  drm_atomic_commit+0x34/0x94
|  drm_client_modeset_commit_atomic+0x2f4/0x3a0
|  drm_client_modeset_commit_locked+0x8c/0x230
|  drm_client_modeset_commit+0x38/0x60
|  drm_fb_helper_set_par+0x104/0x17c
|  fbcon_init+0x43c/0x970
|  visual_init+0x14c/0x1e4
| ...
|
| The buggy address belongs to the object at ffff000007360400
|  which belongs to the cache kmalloc-128 of size 128
| The buggy address is located 64 bytes inside of
|  128-byte region [ffff000007360400, ffff000007360480)
| The buggy address belongs to the page:
| page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360
| flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
|  ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
|  ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
|                                            ^
|  ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
|  ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
---
 drivers/gpu/drm/vc4/vc4_kms.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_kms.c +1 -1
index bb5529a7a9c2..948b3a58aad1 100644
@@ -372,7 +372,7 @@ static void vc4_atomic_commit_tail(struct drm_atomic_state *state)
 		if (!old_hvs_state->fifo_state[channel].in_use)
 			continue;
 
-		ret = drm_crtc_commit_wait(old_hvs_state->fifo_state[i].pending_commit);
+		ret = drm_crtc_commit_wait(old_hvs_state->fifo_state[channel].pending_commit);
 		if (ret)
 			drm_err(dev, "Timed out waiting for commit\n");
 	}
Signature · 1 line
2.11.0
Acked-by on v1 1/1
#1 lore raw
Quoted 25 lines · Mark Rutland

In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and attempt to wait on any channels which are still in use. When we iterate over the CRTCs, we have:

* i - the index of the CRTC
* channel - the channel a CRTC is using

When we check the channel state, we consult:

old_hvs_state->fifo_state[channel].in_use

... but when we wait for the channel, we erroneously wait on:

old_hvs_state->fifo_state[i].pending_commit

... rather than:

   old_hvs_state->fifo_state[channel].pending_commit

... and this bogus access has been observed to result in boot-time hangs on some arm64 configurations, and can be detected using KASAN. FIx this by using the correct index.

I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.

...

Quoted 6 lines
Tested-by on v1 1/1
#2 lore raw
In reply to Mark Rutland
Quoted 81 lines · Mark Rutland

In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and attempt to wait on any channels which are still in use. When we iterate over the CRTCs, we have:

* i - the index of the CRTC
* channel - the channel a CRTC is using

When we check the channel state, we consult:

   old_hvs_state->fifo_state[channel].in_use

... but when we wait for the channel, we erroneously wait on:

   old_hvs_state->fifo_state[i].pending_commit

... rather than:

    old_hvs_state->fifo_state[channel].pending_commit

... and this bogus access has been observed to result in boot-time hangs on some arm64 configurations, and can be detected using KASAN. FIx this by using the correct index.

I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.

Trimmed KASAN splat:

| ==================================================================
| BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910
| Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7
| CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3
|
| Hardware name: Raspberry Pi 3 Model B (DT)
| Workqueue: events_unbound deferred_probe_work_func
| Call trace:
|  dump_backtrace+0x0/0x2b4
|  show_stack+0x1c/0x30
|  dump_stack+0xfc/0x168
|  print_address_description.constprop.0+0x2c/0x2c0
|  kasan_report+0x1dc/0x240
|  __asan_load8+0x98/0xd4
|  vc4_atomic_commit_tail+0x1cc/0x910
|  commit_tail+0x100/0x210
| ...
|
| Allocated by task 7:
|  kasan_save_stack+0x2c/0x60
|  __kasan_kmalloc+0x90/0xb4
|  vc4_hvs_channels_duplicate_state+0x60/0x1a0
|  drm_atomic_get_private_obj_state+0x144/0x230
|  vc4_atomic_check+0x40/0x73c
|  drm_atomic_check_only+0x998/0xe60
|  drm_atomic_commit+0x34/0x94
|  drm_client_modeset_commit_atomic+0x2f4/0x3a0
|  drm_client_modeset_commit_locked+0x8c/0x230
|  drm_client_modeset_commit+0x38/0x60
|  drm_fb_helper_set_par+0x104/0x17c
|  fbcon_init+0x43c/0x970
|  visual_init+0x14c/0x1e4
| ...
|
| The buggy address belongs to the object at ffff000007360400
|  which belongs to the cache kmalloc-128 of size 128
| The buggy address is located 64 bytes inside of
|  128-byte region [ffff000007360400, ffff000007360480)
| The buggy address belongs to the page:
| page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360
| flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
|  ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
|  ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
|                                            ^
|  ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
|  ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
Quoted 12 lines
Quoted 9 lines
---
  drivers/gpu/drm/vc4/vc4_kms.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_kms.c +0 -0
index bb5529a7a9c2..948b3a58aad1 100644

drivers/gpu/drm/vc4/vc4_kms.c static void vc4_atomic_commit_tail(struct drm_atomic_state *state) · line 378

Quoted 8 lines
drivers/gpu/drm/vc4/vc4_kms.c +1 -1
@@ -372,7 +372,7 @@ static void vc4_atomic_commit_tail(struct drm_atomic_state *state)
  		if (!old_hvs_state->fifo_state[channel].in_use)
  			continue;
 
-		ret = drm_crtc_commit_wait(old_hvs_state->fifo_state[i].pending_commit);
+		ret = drm_crtc_commit_wait(old_hvs_state->fifo_state[channel].pending_commit);
  		if (ret)
  			drm_err(dev, "Timed out waiting for commit\n");
  	}

Best regards

Signature · 2 lines
Marek Szyprowski, PhD
Samsung R&D Institute Poland
#3 lore raw
In reply to Mark Rutland

Hi,

Quoted 81 lines · Mark Rutland

In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and attempt to wait on any channels which are still in use. When we iterate over the CRTCs, we have:

* i - the index of the CRTC
* channel - the channel a CRTC is using

When we check the channel state, we consult:

old_hvs_state->fifo_state[channel].in_use

... but when we wait for the channel, we erroneously wait on:

old_hvs_state->fifo_state[i].pending_commit

... rather than:

   old_hvs_state->fifo_state[channel].pending_commit

... and this bogus access has been observed to result in boot-time hangs on some arm64 configurations, and can be detected using KASAN. FIx this by using the correct index.

I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.

Trimmed KASAN splat:

| ==================================================================
| BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910
| Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7
| CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3
|
| Hardware name: Raspberry Pi 3 Model B (DT)
| Workqueue: events_unbound deferred_probe_work_func
| Call trace:
|  dump_backtrace+0x0/0x2b4
|  show_stack+0x1c/0x30
|  dump_stack+0xfc/0x168
|  print_address_description.constprop.0+0x2c/0x2c0
|  kasan_report+0x1dc/0x240
|  __asan_load8+0x98/0xd4
|  vc4_atomic_commit_tail+0x1cc/0x910
|  commit_tail+0x100/0x210
| ...
|
| Allocated by task 7:
|  kasan_save_stack+0x2c/0x60
|  __kasan_kmalloc+0x90/0xb4
|  vc4_hvs_channels_duplicate_state+0x60/0x1a0
|  drm_atomic_get_private_obj_state+0x144/0x230
|  vc4_atomic_check+0x40/0x73c
|  drm_atomic_check_only+0x998/0xe60
|  drm_atomic_commit+0x34/0x94
|  drm_client_modeset_commit_atomic+0x2f4/0x3a0
|  drm_client_modeset_commit_locked+0x8c/0x230
|  drm_client_modeset_commit+0x38/0x60
|  drm_fb_helper_set_par+0x104/0x17c
|  fbcon_init+0x43c/0x970
|  visual_init+0x14c/0x1e4
| ...
|
| The buggy address belongs to the object at ffff000007360400
|  which belongs to the cache kmalloc-128 of size 128
| The buggy address is located 64 bytes inside of
|  128-byte region [ffff000007360400, ffff000007360480)
| The buggy address belongs to the page:
| page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360
| flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
|  ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
|  ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
|                                            ^
|  ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
|  ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
Quoted 12 lines

Applied, thanks!
Maxime