powerpc: Further Strict RWX support
Subsystems (3)
v15 cover powerpc: Further Strict RWX support
Adding more Strict RWX support on powerpc, in particular Strict Module RWX. It is now rebased on ppc next.
For reference the previous revision is available here:
https://lore.kernel.org/linuxppc-dev/[email protected]/
Changes for v15:
Christophe Leroy (2):
powerpc/mm: implement set_memory_attr()
powerpc/32: use set_memory_attr()
Jordan Niethe (4):
powerpc/lib/code-patching: Set up Strict RWX patching earlier powerpc/modules: Make module_alloc() Strict Module RWX aware powerpc/bpf: Remove bpf_jit_free()
powerpc/bpf: Write protect JIT code
Russell Currey (3):
powerpc/mm: Implement set_memory() routines powerpc/kprobes: Mark newly allocated probes as ROX
powerpc: Set ARCH_HAS_STRICT_MODULE_RWX
- Force STRICT_KERNEL_RWX if STRICT_MODULE_RWX is selected
- Predicate on !PPC_BOOK3S_32 instead
arch/powerpc/Kconfig | 3 + arch/powerpc/include/asm/mmu.h | 5 + arch/powerpc/include/asm/set_memory.h | 34 +++++++ arch/powerpc/kernel/kprobes.c | 17 ++++ arch/powerpc/kernel/module.c | 4 +- arch/powerpc/lib/code-patching.c | 12 +-- arch/powerpc/mm/Makefile | 2 +- arch/powerpc/mm/pageattr.c | 134 ++++++++++++++++++++++++++ arch/powerpc/mm/pgtable_32.c | 60 ++---------- arch/powerpc/net/bpf_jit_comp.c | 13 +-- 10 files changed, 212 insertions(+), 72 deletions(-) create mode 100644 arch/powerpc/include/asm/set_memory.h create mode 100644 arch/powerpc/mm/pageattr.c
Signature · 1 line
2.25.1
PATCH v15 1/9 powerpc/mm: Implement set_memory() routines
From: Russell Currey <[email protected]>
The set_memory_{ro/rw/nx/x}() functions are required for STRICT_MODULE_RWX, and are generally useful primitives to have. This implementation is designed to be generic across powerpc's many MMUs. It's possible that this could be optimised to be faster for specific MMUs.
This implementation does not handle cases where the caller is attempting to change the mapping of the page it is executing from, or if another CPU is concurrently using the page being altered. These cases likely shouldn't happen, but a more complex implementation with MMU-specific code could safely handle them.
On hash, the linear mapping is not kept in the linux pagetable, so this will not change the protection if used on that range. Currently these functions are not used on the linear map so just WARN for now.
apply_to_existing_page_range() does not work on huge pages so for now disallow changing the protection of huge pages.
[jpn: - Allow set memory functions to be used without Strict RWX
- Hash: Disallow certain regions
- Have change_page_attr() take function pointers to manipulate ptes
- Radix: Add ptesync after set_pte_at()]
---
v10: WARN if trying to change the hash linear map
v11: - Update copywrite dates
- Allow set memory functions to be used without Strict RWX
- Hash: Disallow certain regions and add comment explaining why
- Have change_page_attr() take function pointers to manipulate ptes
- Clarify change_page_attr()'s comment
- Radix: Add ptesync after set_pte_at()
v12: - change_page_attr() back to taking an action value
- disallow operating on huge pages
v14: - only check is_vm_area_hugepages() for virtual memory
--- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/set_memory.h | 32 ++++++++ arch/powerpc/mm/Makefile | 2 +- arch/powerpc/mm/pageattr.c | 101 ++++++++++++++++++++++++++ 4 files changed, 135 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/include/asm/set_memory.h create mode 100644 arch/powerpc/mm/pageattr.c
arch/powerpc/Kconfig +1 -0
@@ -140,6 +140,7 @@ config PPC select ARCH_HAS_PTE_DEVMAP if PPC_BOOK3S_64 select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64 + select ARCH_HAS_SET_MEMORY select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION) select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAS_UACCESS_FLUSHCACHE
arch/powerpc/include/asm/set_memory.h new file +32 -0
@@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SET_MEMORY_H +#define _ASM_POWERPC_SET_MEMORY_H + +#define SET_MEMORY_RO 0 +#define SET_MEMORY_RW 1 +#define SET_MEMORY_NX 2 +#define SET_MEMORY_X 3 + +int change_memory_attr (unsigned long addr,int numpages,long action); + +static inline int set_memory_ro (unsigned long addr,int numpages) +{ +return change_memory_attr (addr, numpages,SET_MEMORY_RO ); +} + +static inline int set_memory_rw (unsigned long addr,int numpages) +{ +return change_memory_attr (addr, numpages,SET_MEMORY_RW ); +} + +static inline int set_memory_nx (unsigned long addr,int numpages) +{ +return change_memory_attr (addr, numpages,SET_MEMORY_NX ); +} + +static inline int set_memory_x (unsigned long addr,int numpages) +{ +return change_memory_attr (addr, numpages,SET_MEMORY_X ); +} + +#endif
arch/powerpc/mm/Makefile +1 -1
@@ -5,7 +5,7 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) -obj-y := fault.o mem.o pgtable.o mmap.o maccess.o \ +obj-y := fault.o mem.o pgtable.o mmap.o maccess.o pageattr.o \ init_$(BITS).o pgtable_$(BITS).o \ pgtable-frag.o ioremap.o ioremap_$(BITS).o \ init-common.o mmu_context.o drmem.o \
arch/powerpc/mm/pageattr.c new file +101 -0
101 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH v15 2/9 powerpc/lib/code-patching: Set up Strict RWX patching earlier
In reply to Jordan Niethesetup_text_poke_area() is a late init call so it runs before mark_rodata_ro() and after the init calls. This lets all the init code patching simply write to their locations. In the future, kprobes is going to allocate its instruction pages RO which means they will need setup_text__poke_area() to have been already called for their code patching. However, init_kprobes() (which allocates and patches some instruction pages) is an early init call so it happens before setup_text__poke_area().
start_kernel() calls poking_init() before any of the init calls. On powerpc, poking_init() is currently a nop. setup_text_poke_area() relies on kernel virtual memory, cpu hotplug and per_cpu_areas being setup. setup_per_cpu_areas(), boot_cpu_hotplug_init() and mm_init() are called before poking_init().
Turn setup_text_poke_area() into poking_init().
---
v9: New to series
--- arch/powerpc/lib/code-patching.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
arch/powerpc/lib/code-patching.c +4 -8
@@ -70,14 +70,11 @@ static int text_area_cpu_down(unsigned int cpu) }/* -* Run as a late init call. This allows all the boot time patching to be done -* simply by patching the code, and then we're called here prior to -* mark_rodata_ro(), which happens after all init calls are run. Although -* BUG_ON() is rude, in this case it should only happen if ENOMEM, and we judge -* it as being preferable to a kernel that will crash later when someone tries -* to use patch_instruction(). +* Although BUG_ON() is rude, in this case it should only happen if ENOMEM, and +* we judge it as being preferable to a kernel that will crash later when +* someone tries to use patch_instruction(). */ -static int __init setup_text_poke_area(void) +int __init poking_init(void) { BUG_ON(!cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powerpc/text_poke:online", text_area_cpu_up,
@@ -85,7 +82,6 @@ static int __init setup_text_poke_area(void)return 0 ; } -late_initcall (setup_text_poke_area);/* * This can be called for kernel text or a module.
Signature · 1 line
2.25.1
PATCH v15 3/9 powerpc/modules: Make module_alloc() Strict Module RWX aware
In reply to Jordan NietheMake module_alloc() use PAGE_KERNEL protections instead of PAGE_KERNEL_EXEX if Strict Module RWX is enabled.
---
v14: - Split out from powerpc: Set ARCH_HAS_STRICT_MODULE_RWX
- Add and use strict_module_rwx_enabled() helper
--- arch/powerpc/include/asm/mmu.h | 5 +++++ arch/powerpc/kernel/module.c | 4 +++- 2 files changed, 8 insertions(+), 1 deletion(-)
arch/powerpc/include/asm/mmu.h +5 -0
@@ -345,6 +345,11 @@ static inline bool strict_kernel_rwx_enabled(void)return false; }#endif + +static inline bool strict_module_rwx_enabled (void ) +{ +return IS_ENABLED (CONFIG_STRICT_MODULE_RWX ) &&strict_kernel_rwx_enabled (); +}#endif /* !__ASSEMBLY__ */ /* The kernel use the constants below to index in the page sizes array.
arch/powerpc/kernel/module.c +3 -1
@@ -92,12 +92,14 @@ int module_finalize(const Elf_Ehdr *hdr, static __always_inline void *__module_alloc (unsigned long size,unsigned long start,unsigned long end) { +pgprot_t prot =strict_module_rwx_enabled () ?PAGE_KERNEL :PAGE_KERNEL_EXEC ; +/* * Don't do huge page allocations for modules yet until more testing * is done. STRICT_MODULE_RWX may require extra work to support this * too. */ -return __vmalloc_node_range (size,1 , start, end,GFP_KERNEL ,PAGE_KERNEL_EXEC , +return __vmalloc_node_range (size,1 , start, end,GFP_KERNEL , prot,VM_FLUSH_RESET_PERMS |VM_NO_HUGE_VMAP ,NUMA_NO_NODE ,__builtin_return_address (0 )); }
Signature · 1 line
2.25.1
PATCH v15 4/9 powerpc/kprobes: Mark newly allocated probes as ROX
In reply to Jordan NietheFrom: Russell Currey <[email protected]>
Add the arch specific insn page allocator for powerpc. This allocates ROX pages if STRICT_KERNEL_RWX is enabled. These pages are only written to with patch_instruction() which is able to write RO pages.
---
v9: - vmalloc_exec() no longer exists
- Set the page to RW before freeing it
v10: - use __vmalloc_node_range()
v11: - Neaten up
v12: - Switch from __vmalloc_node_range() to module_alloc()
v13: Use strict_kernel_rwx_enabled()
v14: Use strict_module_rwx_enabled()
--- arch/powerpc/kernel/kprobes.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/powerpc/kernel/kprobes.c +17 -0
@@ -19,11 +19,13 @@#include <linux/extable.h> #include <linux/kdebug.h> #include <linux/slab.h> +#include <linux/moduleloader.h> #include <asm/code-patching.h> #include <asm/cacheflush.h> #include <asm/sstep.h> #include <asm/sections.h> #include <asm/inst.h> +#include <asm/set_memory.h> #include <linux/uaccess.h> DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
@@ -103,6 +105,21 @@ kprobe_opcode_t *kprobe_lookup_name(const char *name, unsigned int offset)return addr; } +void *alloc_insn_page (void ) +{ +void *page; + + page =module_alloc (PAGE_SIZE ); +if (!page) +return NULL ; + +if (strict_module_rwx_enabled ()) { +set_memory_ro ((unsigned long )page,1 ); +set_memory_x ((unsigned long )page,1 ); + } +return page; +} +int arch_prepare_kprobe (struct kprobe *p) {int ret =0 ;
Signature · 1 line
2.25.1
PATCH v15 5/9 powerpc/bpf: Remove bpf_jit_free()
In reply to Jordan NietheCommit 74451e66d516 ("bpf: make jited programs visible in traces") added a default bpf_jit_free() implementation. Powerpc did not use the default bpf_jit_free() as powerpc did not set the images read-only. The default bpf_jit_free() called bpf_jit_binary_unlock_ro() is why it could not be used for powerpc.
Commit d53d2f78cead ("bpf: Use vmalloc special flag") moved keeping track of read-only memory to vmalloc. This included removing bpf_jit_binary_unlock_ro(). Therefore there is no reason powerpc needs its own bpf_jit_free(). Remove it.
---
v11: New to series
--- arch/powerpc/net/bpf_jit_comp.c | 12 ------------ 1 file changed, 12 deletions(-)
arch/powerpc/net/bpf_jit_comp.c +0 -12
@@ -257,15 +257,3 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)return fp; } - -/* Overriding bpf_jit_free() as we don't set images read-only. */ -void bpf_jit_free (struct bpf_prog *fp) -{ -unsigned long addr = (unsigned long )fp->bpf_func &PAGE_MASK ; -struct bpf_binary_header *bpf_hdr = (void *)addr; - -if (fp->jited) -bpf_jit_binary_free (bpf_hdr); - -bpf_prog_unlock_free (fp); -}
Signature · 1 line
2.25.1
PATCH v15 6/9 powerpc/bpf: Write protect JIT code
In reply to Jordan NietheAdd the necessary call to bpf_jit_binary_lock_ro() to remove write and add exec permissions to the JIT image after it has finished being written.
Without CONFIG_STRICT_MODULE_RWX the image will be writable and executable until the call to bpf_jit_binary_lock_ro().
---
v10: New to series
v11: Remove CONFIG_STRICT_MODULE_RWX conditional
--- arch/powerpc/net/bpf_jit_comp.c | 1 + 1 file changed, 1 insertion(+)
arch/powerpc/net/bpf_jit_comp.c +1 -0
@@ -237,6 +237,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) fp->jited_len = alloclen;bpf_flush_icache (bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages *PAGE_SIZE )); +bpf_jit_binary_lock_ro (bpf_hdr);if (!fp->is_func || extra_pass) {bpf_prog_fill_jited_linfo (fp, addrs); out_addrs:
Signature · 1 line
2.25.1
PATCH v15 7/9 powerpc: Set ARCH_HAS_STRICT_MODULE_RWX
In reply to Jordan NietheFrom: Russell Currey <[email protected]>
To enable strict module RWX on powerpc, set:
CONFIG_STRICT_MODULE_RWX=y
You should also have CONFIG_STRICT_KERNEL_RWX=y set to have any real security benefit.
ARCH_HAS_STRICT_MODULE_RWX is set to require ARCH_HAS_STRICT_KERNEL_RWX. This is due to a quirk in arch/Kconfig and arch/powerpc/Kconfig that makes STRICT_MODULE_RWX *on by default* in configurations where STRICT_KERNEL_RWX is *unavailable*.
Since this doesn't make much sense, and module RWX without kernel RWX doesn't make much sense, having the same dependencies as kernel RWX works around this problem.
Book3s/32 603 and 604 core processors are not able to write protect kernel pages so do not set ARCH_HAS_STRICT_MODULE_RWX for Book3s/32.
[jpn: - predicate on !PPC_BOOK3S_604
- make module_alloc() use PAGE_KERNEL protection]
---
v10: - Predicate on !PPC_BOOK3S_604
- Make module_alloc() use PAGE_KERNEL protection
v11: - Neaten up
v13: Use strict_kernel_rwx_enabled()
v14: Make changes to module_alloc() its own commit
v15: - Force STRICT_KERNEL_RWX if STRICT_MODULE_RWX is selected
- Predicate on !PPC_BOOK3S_32 instead
--- arch/powerpc/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/powerpc/Kconfig +2 -0
@@ -142,6 +142,7 @@ config PPC select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64 select ARCH_HAS_SET_MEMORY select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION) + select ARCH_HAS_STRICT_MODULE_RWX if ARCH_HAS_STRICT_KERNEL_RWX && !PPC_BOOK3S_32 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAS_UACCESS_FLUSHCACHE select ARCH_HAS_UBSAN_SANITIZE_ALL
@@ -267,6 +268,7 @@ config PPC select PPC_DAWR if PPC64 select RTC_LIB select SPARSE_IRQ + select STRICT_KERNEL_RWX if STRICT_MODULE_RWX select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK select VIRT_TO_BUS if !PPC64
Signature · 1 line
2.25.1
Re: [PATCH v15 7/9] powerpc: Set ARCH_HAS_STRICT_MODULE_RWX
Hi,
Quoted 52 lines · Jordan Niethe
From: Russell Currey <[email protected]>
To enable strict module RWX on powerpc, set:
CONFIG_STRICT_MODULE_RWX=yYou should also have
CONFIG_STRICT_KERNEL_RWX=yset to have any real security benefit.
ARCH_HAS_STRICT_MODULE_RWXis set to requireARCH_HAS_STRICT_KERNEL_RWX. This is due to a quirk inarch/Kconfigandarch/powerpc/Kconfigthat makesSTRICT_MODULE_RWX*on by default* in configurations whereSTRICT_KERNEL_RWXis *unavailable*.Since this doesn't make much sense, and module RWX without kernel RWX doesn't make much sense, having the same dependencies as kernel RWX works around this problem.
Book3s/32 603 and 604 core processors are not able to write protect kernel pages so do not set
ARCH_HAS_STRICT_MODULE_RWXfor Book3s/32.Reviewed-by Christophe Leroy <[email protected]>Signed-off-by Russell Currey <[email protected]>[jpn: - predicate on !PPC_BOOK3S_604
- makemodule_alloc()usePAGE_KERNELprotection]Signed-off-by Jordan Niethe <[email protected]>---
v10: - Predicate on !PPC_BOOK3S_604
- Makemodule_alloc()usePAGE_KERNELprotection
v11: - Neaten up
v13: Usestrict_kernel_rwx_enabled()
v14: Make changes tomodule_alloc()its own commit
v15: - ForceSTRICT_KERNEL_RWXifSTRICT_MODULE_RWXis selected
- Predicate on !PPC_BOOK3S_32 instead--- arch/powerpc/Kconfig | 2 ++ 1 file changed, 2 insertions(+)arch/powerpc/Kconfig +1
-0@@ -142,6 +142,7 @@ config PPC select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64 select ARCH_HAS_SET_MEMORY select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION) + select ARCH_HAS_STRICT_MODULE_RWX if ARCH_HAS_STRICT_KERNEL_RWX && !PPC_BOOK3S_32 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAS_UACCESS_FLUSHCACHE select ARCH_HAS_UBSAN_SANITIZE_ALL
arch/powerpc/Kconfig config PPC · line 274
Quoted 7 lines
arch/powerpc/Kconfig +1
-0@@ -267,6 +268,7 @@ config PPC select PPC_DAWR if PPC64 select RTC_LIB select SPARSE_IRQ + select STRICT_KERNEL_RWX if STRICT_MODULE_RWX select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK select VIRT_TO_BUS if !PPC64
since this patch is merged my VM is experiencing a crash at boot (20% of the time):
[ 8.496850] kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0) [ 8.496921] BUG: Unable to handle kernel instruction fetch [ 8.496954] Faulting instruction address: 0xc008000004073278 [ 8.496994] Oops: Kernel access of bad area, sig: 11 [#1] [ 8.497028] LE PAGE_SIZEdK MMU=Radix SMP NR_CPUS 48 NUMA pSeries [ 8.497071] Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks xfs libcrc32c virtio_net net_failover virtio_blk vmx_crypto failover dm_mirror dm_region_hash dm_log dm_mod [ 8.497186] CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12 [ 8.497228] Workqueue: events control_work_handler [virtio_console] [ 8.497272] NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0 [ 8.497320] REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+) [ 8.497361] MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf [ 8.497426] CFAR: c0000000001e9e44 IRQMASK: 1 [ 8.497426] GPR00: c008000004073278 c00000002e4efa80 c000000002a26b00 c000000042c39520 [ 8.497426] GPR04: 0000000000000001 0000000000000000 0000000000000000 00000000000000ff [ 8.497426] GPR08: 0000000000000001 c000000042c39520 0000000000000001 c008000004076008 [ 8.497426] GPR12: c0000000001e9de0 c0000001fffccb00 c00000000018ba88 c00000002c91d400 [ 8.497426] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 8.497426] GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000004080340 [ 8.497426] GPR24: c0080000040a01e8 0000000000000000 0000000000000000 c00000002e0975c0 [ 8.497426] GPR28: c00000002ce72940 c000000042c39520 0000000000000048 0000000000000038 [ 8.497891] NIP [c008000004073278] fill_queue+0xf0/0x210 [virtio_console] [ 8.497934] LR [c008000004073278] fill_queue+0xf0/0x210 [virtio_console] [ 8.497976] Call Trace: [ 8.497993] [c00000002e4efa80] [c00800000407323c] fill_queue+0xb4/0x210 [virtio_console] (unreliable) [ 8.498052] [c00000002e4efae0] [c008000004073a90] add_port+0x1a8/0x470 [virtio_console] [ 8.498102] [c00000002e4efbb0] [c0080000040750f4] control_work_handler+0xbc/0x1e8 [virtio_console] [ 8.498160] [c00000002e4efc60] [c00000000017f4f0] process_one_work+0x290/0x590 [ 8.498212] [c00000002e4efd00] [c00000000017f878] worker_thread+0x88/0x620 [ 8.498256] [c00000002e4efda0] [c00000000018bc14] kthread+0x194/0x1a0 [ 8.498299] [c00000002e4efe10] [c00000000000cf54] ret_from_kernel_thread+0x5c/0x64 [ 8.498349] Instruction dump: [ 8.498374] 7da96b78 a14d0c8a 419c00b0 2f8a0000 419eff88 b32d0c8a 7c0004ac 4bffff7c [ 8.498430] 60000000 60000000 7fa3eb78 48002d95 <e8410018> 38600000 480025e1 e8410018 [ 8.498485] ---[ end trace 16ee10903290b647 ]--- [ 8.501433] [ 9.502601] Kernel panic - not syncing: Fatal exception
add_port+0x1a8/0x470 :
1420
1421 /* We can safely ignore ENOSPC because it means
1422 * the queue already has buffers. Buffers are removed
1423 * only by virtcons_remove(), not by unplug_port()
1424 */
->1425 err = fill_queue(port->in_vq, &port->inbuf_lock);
1426 if (err < 0 && err != -ENOSPC) {
1427 dev_err(port->dev, "Error allocating inbufs\n");
1428 goto free_device;
1429 }
fill_queue+0x90/0x210 :
1326 static int fill_queue(struct virtqueue *vq, spinlock_t *lock)
1327 {
1328 struct port_buffer *buf;
1329 int nr_added_bufs;
1330 int ret;
1331
1332 nr_added_bufs = 0;
1333 do {
1334 buf = alloc_buf(vq->vdev, PAGE_SIZE, 0);
1335 if (!buf)
1336 return -ENOMEM;
1337
->1338 spin_lock_irq(lock);
I'm using an upstream kernel (5.14-rc4, 251a1524293d) in the VM.
My host is a RHEL 8.5/POWER9: qemu-kvm-6.0.0-21 and kernel-4.18.0-325
My qemu command line is:
/usr/libexec/qemu-kvm \
-M pseries,accel=kvm \
-nographic -nodefaults \
-device virtio-serial-pci \
-device virtconsole \
-device virtio-net-pci,macš:2b:2c:2d:2e:2f,netdev=hostnet0 \
-blockdev node-name=disk1,file.driver=file,driver=qcow2,file.driver=file,file.filename=disk.qcow2 \
-netdev bridge,id=hostnet0,br=virbr0,helper=/usr/libexec/qemu-bridge-helper \
-device virtio-blk-pci,id=image1,drive=disk1 \
-m 8192 \
-smp 4 \
-serial mon:stdio
Do we need something in qemu/kvm to support STRICT_MODULE_RWX ?
Thanks,
Laurent
Re: [PATCH v15 7/9] powerpc: Set ARCH_HAS_STRICT_MODULE_RWX
Quoted 96 lines · Laurent Vivier
since this patch is merged my VM is experiencing a crash at boot (20% of the time):
[ 8.496850] kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0) [ 8.496921] BUG: Unable to handle kernel instruction fetch [ 8.496954] Faulting instruction address: 0xc008000004073278 [ 8.496994] Oops: Kernel access of bad area, sig: 11 [#1] [ 8.497028] LE PAGE_SIZEdK MMU=Radix SMP NR_CPUS 48 NUMA pSeries [ 8.497071] Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks xfs libcrc32c virtio_net net_failover virtio_blk vmx_crypto failover dm_mirror dm_region_hash dm_log dm_mod [ 8.497186] CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12 [ 8.497228] Workqueue: events control_work_handler [virtio_console] [ 8.497272] NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0 [ 8.497320] REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+) [ 8.497361] MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf [ 8.497426] CFAR: c0000000001e9e44 IRQMASK: 1 [ 8.497426] GPR00: c008000004073278 c00000002e4efa80 c000000002a26b00 c000000042c39520 [ 8.497426] GPR04: 0000000000000001 0000000000000000 0000000000000000 00000000000000ff [ 8.497426] GPR08: 0000000000000001 c000000042c39520 0000000000000001 c008000004076008 [ 8.497426] GPR12: c0000000001e9de0 c0000001fffccb00 c00000000018ba88 c00000002c91d400 [ 8.497426] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 8.497426] GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000004080340 [ 8.497426] GPR24: c0080000040a01e8 0000000000000000 0000000000000000 c00000002e0975c0 [ 8.497426] GPR28: c00000002ce72940 c000000042c39520 0000000000000048 0000000000000038 [ 8.497891] NIP [c008000004073278] fill_queue+0xf0/0x210 [virtio_console] [ 8.497934] LR [c008000004073278] fill_queue+0xf0/0x210 [virtio_console] [ 8.497976] Call Trace: [ 8.497993] [c00000002e4efa80] [c00800000407323c] fill_queue+0xb4/0x210 [virtio_console] (unreliable) [ 8.498052] [c00000002e4efae0] [c008000004073a90] add_port+0x1a8/0x470 [virtio_console] [ 8.498102] [c00000002e4efbb0] [c0080000040750f4] control_work_handler+0xbc/0x1e8 [virtio_console] [ 8.498160] [c00000002e4efc60] [c00000000017f4f0] process_one_work+0x290/0x590 [ 8.498212] [c00000002e4efd00] [c00000000017f878] worker_thread+0x88/0x620 [ 8.498256] [c00000002e4efda0] [c00000000018bc14] kthread+0x194/0x1a0 [ 8.498299] [c00000002e4efe10] [c00000000000cf54] ret_from_kernel_thread+0x5c/0x64 [ 8.498349] Instruction dump: [ 8.498374] 7da96b78 a14d0c8a 419c00b0 2f8a0000 419eff88 b32d0c8a 7c0004ac 4bffff7c [ 8.498430] 60000000 60000000 7fa3eb78 48002d95 <e8410018> 38600000 480025e1 e8410018 [ 8.498485] ---[ end trace 16ee10903290b647 ]--- [ 8.501433] [ 9.502601] Kernel panic - not syncing: Fatal exception
add_port+0x1a8/0x470:1420
1421 /* We can safely ignore ENOSPC because it means
1422 * the queue already has buffers. Buffers are removed
1423 * only byvirtcons_remove(), not byunplug_port()
1424 */
->1425 err =fill_queue(port->in_vq, &port->inbuf_lock);
1426 if (err < 0 && err !=-ENOSPC) {
1427dev_err(port->dev, "Error allocating inbufs\n");
1428 gotofree_device;
1429 }
fill_queue+0x90/0x210:1326 static int
fill_queue(struct virtqueue *vq, spinlock_t *lock)
1327 {
1328 structport_buffer*buf;
1329 intnr_added_bufs;
1330 int ret;
1331
1332nr_added_bufs= 0;
1333 do {
1334 buf =alloc_buf(vq->vdev, PAGE_SIZE, 0);
1335 if (!buf)
1336 return-ENOMEM;
1337
->1338spin_lock_irq(lock);I'm using an upstream kernel (5.14-rc4,
251a1524293d) in the VM.My host is a RHEL 8.5/POWER9: qemu-kvm-6.0.0-21 and kernel-4.18.0-325
My qemu command line is:
/usr/libexec/qemu-kvm\(quoted diff) +0
-6-M pseries,accel=kvm \ -nographic -nodefaults \ -device virtio-serial-pci \ -device virtconsole \ -device virtio-net-pci,macš:2b:2c:2d:2e:2f,netdev=hostnet0 \ -blockdevnode-name=disk1,file.driver=file,driver=qcow2,file.driver=file,file.filename=disk.qcow2 \
(quoted diff) +0
-5-netdev bridge,id=hostnet0,br=virbr0,helper=/usr/libexec/qemu-bridge-helper \ -device virtio-blk-pci,id=image1,drive=disk1 \ -m 8192 \ -smp 4 \ -serial mon:stdio
Quoted 4 lines
Do we need something in qemu/kvm to support
STRICT_MODULE_RWX?Thanks,
Laurent
This patch survived 300 consecutive runs without the issue:
arch/powerpc/mm/pageattr.c +2 -8
@@ -35,10 +35,7 @@ static int change_page_attr(pte_t *ptep, unsigned long addr, void *data)pte_t pte;spin_lock (&init_mm.page_table_lock); - -/* invalidate the PTE so it's safe to modify */ - pte =ptep_get_and_clear (&init_mm, addr, ptep); -flush_tlb_kernel_range (addr, addr +PAGE_SIZE ); + pte = *ptep;/* modify the PTE bits as desired, then apply */ switch (action) {
@@ -60,10 +57,7 @@ static int change_page_attr(pte_t *ptep, unsigned long addr, void *data) }set_pte_at (&init_mm, addr, ptep, pte); - -/* See ptesync comment in radix__set_pte_at() */ -if (radix_enabled ()) - asmvolatile ("ptesync" : : :"memory" ); +flush_tlb_kernel_range (addr, addr +PAGE_SIZE );spin_unlock (&init_mm.page_table_lock);return 0 ;
---
What I think is happening is that the virtio_console code is running at the same time we are doing the module_enable_ro at the end of do_init_module due to the async nature of the work handler. There is a window after the TLB flush when the PTE has its permission bits cleared, so any translations of the module code page attempted during that window will fault.
I'm ignorant of strict rwx in general so I don't see why we need to clear the bits before setting them to their final value, but as I understand it, the set_pte_at + flush_tlb_kernel_range satisfy the ISA requirement of [ptesync; tlbie; eieio; tlbsync; ptesync;] so it seems like the patch should work.
Now, I cannot explain why the crash always happens around the code that does the module's symbols relocation (the NIP in Laurent's trace is the TOC reload from module_64.c:restore_r2). Maybe because instructions are already in icache until the first branch into the stub?
Anyway, this is what Murilo and I found out over our debugging session in the past couple of days. I hope it helps. =)
Re: [PATCH v15 7/9] powerpc: Set ARCH_HAS_STRICT_MODULE_RWX
Quoted 136 lines · Fabiano Rosas
Quoted 96 lines · Laurent Vivier
since this patch is merged my VM is experiencing a crash at boot (20% of the time):
[ 8.496850] kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0) [ 8.496921] BUG: Unable to handle kernel instruction fetch [ 8.496954] Faulting instruction address: 0xc008000004073278 [ 8.496994] Oops: Kernel access of bad area, sig: 11 [#1] [ 8.497028] LE PAGE_SIZEdK MMU=Radix SMP NR_CPUS 48 NUMA pSeries [ 8.497071] Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks xfs libcrc32c virtio_net net_failover virtio_blk vmx_crypto failover dm_mirror dm_region_hash dm_log dm_mod [ 8.497186] CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12 [ 8.497228] Workqueue: events control_work_handler [virtio_console] [ 8.497272] NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0 [ 8.497320] REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+) [ 8.497361] MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf [ 8.497426] CFAR: c0000000001e9e44 IRQMASK: 1 [ 8.497426] GPR00: c008000004073278 c00000002e4efa80 c000000002a26b00 c000000042c39520 [ 8.497426] GPR04: 0000000000000001 0000000000000000 0000000000000000 00000000000000ff [ 8.497426] GPR08: 0000000000000001 c000000042c39520 0000000000000001 c008000004076008 [ 8.497426] GPR12: c0000000001e9de0 c0000001fffccb00 c00000000018ba88 c00000002c91d400 [ 8.497426] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 8.497426] GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000004080340 [ 8.497426] GPR24: c0080000040a01e8 0000000000000000 0000000000000000 c00000002e0975c0 [ 8.497426] GPR28: c00000002ce72940 c000000042c39520 0000000000000048 0000000000000038 [ 8.497891] NIP [c008000004073278] fill_queue+0xf0/0x210 [virtio_console] [ 8.497934] LR [c008000004073278] fill_queue+0xf0/0x210 [virtio_console] [ 8.497976] Call Trace: [ 8.497993] [c00000002e4efa80] [c00800000407323c] fill_queue+0xb4/0x210 [virtio_console] (unreliable) [ 8.498052] [c00000002e4efae0] [c008000004073a90] add_port+0x1a8/0x470 [virtio_console] [ 8.498102] [c00000002e4efbb0] [c0080000040750f4] control_work_handler+0xbc/0x1e8 [virtio_console] [ 8.498160] [c00000002e4efc60] [c00000000017f4f0] process_one_work+0x290/0x590 [ 8.498212] [c00000002e4efd00] [c00000000017f878] worker_thread+0x88/0x620 [ 8.498256] [c00000002e4efda0] [c00000000018bc14] kthread+0x194/0x1a0 [ 8.498299] [c00000002e4efe10] [c00000000000cf54] ret_from_kernel_thread+0x5c/0x64 [ 8.498349] Instruction dump: [ 8.498374] 7da96b78 a14d0c8a 419c00b0 2f8a0000 419eff88 b32d0c8a 7c0004ac 4bffff7c [ 8.498430] 60000000 60000000 7fa3eb78 48002d95 <e8410018> 38600000 480025e1 e8410018 [ 8.498485] ---[ end trace 16ee10903290b647 ]--- [ 8.501433] [ 9.502601] Kernel panic - not syncing: Fatal exception
add_port+0x1a8/0x470:1420
1421 /* We can safely ignore ENOSPC because it means1422 * the queue already has buffers. Buffers are removed 1423 * only by virtcons_remove(), not by unplug_port() 1424 */->1425 err =
fill_queue(port->in_vq, &port->inbuf_lock);
1426 if (err < 0 && err !=-ENOSPC) {
1427dev_err(port->dev, "Error allocating inbufs\n");
1428 gotofree_device;
1429 }
fill_queue+0x90/0x210:1326 static int
fill_queue(struct virtqueue *vq, spinlock_t *lock)
1327 {1328 struct port_buffer *buf; 1329 int nr_added_bufs; 1330 int ret;1331
1332nr_added_bufs= 0;
1333 do {
1334 buf =alloc_buf(vq->vdev, PAGE_SIZE, 0);
1335 if (!buf)
1336 return-ENOMEM;
1337
->1338spin_lock_irq(lock);I'm using an upstream kernel (5.14-rc4,
251a1524293d) in the VM.My host is a RHEL 8.5/POWER9: qemu-kvm-6.0.0-21 and kernel-4.18.0-325
My qemu command line is:
/usr/libexec/qemu-kvm\(quoted diff) +0
-6-M pseries,accel=kvm \ -nographic -nodefaults \ -device virtio-serial-pci \ -device virtconsole \ -device virtio-net-pci,macš:2b:2c:2d:2e:2f,netdev=hostnet0 \ -blockdevnode-name=disk1,file.driver=file,driver=qcow2,file.driver=file,file.filename=disk.qcow2 \
(quoted diff) +0
-5-netdev bridge,id=hostnet0,br=virbr0,helper=/usr/libexec/qemu-bridge-helper \ -device virtio-blk-pci,id=image1,drive=disk1 \ -m 8192 \ -smp 4 \ -serial mon:stdioQuoted 4 lines
Do we need something in qemu/kvm to support
STRICT_MODULE_RWX?Thanks,
LaurentThis patch survived 300 consecutive runs without the issue:
arch/powerpc/mm/pageattr.c +2
-9@@ -35,10 +35,7 @@ static int change_page_attr(pte_t *ptep, unsigned long addr, void *data)pte_t pte;spin_lock (&init_mm.page_table_lock); - -/* invalidate the PTE so it's safe to modify */ - pte =ptep_get_and_clear (&init_mm, addr, ptep); -flush_tlb_kernel_range (addr, addr +PAGE_SIZE ); + pte = *ptep;/* modify the PTE bits as desired, then apply */ switch (action) {@@ -60,10 +57,7 @@ static int change_page_attr(pte_t *ptep, unsigned long addr, void *data) }set_pte_at (&init_mm, addr, ptep, pte); - -/* See ptesync comment in radix__set_pte_at() */ -if (radix_enabled ()) - asmvolatile ("ptesync" : : :"memory" ); +flush_tlb_kernel_range (addr, addr +PAGE_SIZE );spin_unlock (&init_mm.page_table_lock);return 0 ; ---
Quoted 6 lines
What I think is happening is that the
virtio_consolecode is running at the same time we are doing themodule_enable_roat the end ofdo_init_moduledue to the async nature of the work handler. There is a window after the TLB flush when the PTE has its permission bits cleared, so any translations of the module code page attempted during that window will fault.
Thanks for looking at this. I agree that this is the problem. This avoids the crash (not a proper solution):
kernel/module.c +0 -0
@@ -2011,13 +2011,15 @@ static void module_enable_ro(const struct
module *mod, bool after_init)
if (!rodata_enabled)
return;- set_vm_flush_reset_perms(mod->core_layout.base);
- set_vm_flush_reset_perms(mod->init_layout.base);
- frob_text(&mod->core_layout, set_memory_ro);
-
- frob_rodata(&mod->core_layout, set_memory_ro);
- frob_text(&mod->init_layout, set_memory_ro);
- frob_rodata(&mod->init_layout, set_memory_ro);
+ if (!after_init) {
+ set_vm_flush_reset_perms(mod->core_layout.base);
+ set_vm_flush_reset_perms(mod->init_layout.base);
+ frob_text(&mod->core_layout, set_memory_ro);
+
+ frob_rodata(&mod->core_layout, set_memory_ro);
+ frob_text(&mod->init_layout, set_memory_ro);
+ frob_rodata(&mod->init_layout, set_memory_ro);+ }
Quoted 6 lines
I'm ignorant of strict rwx in general so I don't see why we need to clear the bits before setting them to their final value, but as I understand it, the
set_pte_at+flush_tlb_kernel_rangesatisfy the ISA requirement of [ptesync; tlbie; eieio; tlbsync; ptesync;] so it seems like the patch should work.
I believe it's done like that because ISA 6.10.1.2 Modifying a Translation Table Entry -
"The sequence is equivalent to deleting the PTE and then adding a new one". In that sequence, I think it is [set pte to 0; ptesync; tlbie; eieio; tlbsync; ptesync;]
But it does seem like we need to do something like your patch for change_page_attr() to work as expected.
Quoted 6 lines
Now, I cannot explain why the crash always happens around the code that does the module's symbols relocation (the NIP in Laurent's trace is the TOC reload from module_64.c:restore_r2). Maybe because instructions are already in icache until the first branch into the stub?
Yeah, mpe thought it might be some cache effect of a branch instruction. From time to time I did see Oopses like this (not "kernel tried to execute exec-protected page")
[ 124.986964][ T52] Oops: Kernel access of bad area, sig: 11 [#1] [ 124.987043][ T52] LE PAGE_SIZEdK MMU=Radix SMP NR_CPUS 48 NUMA pSeries [ 124.987095][ T52] Modules linked in: virtio_console binfmt_misc virtiofs fuse virtio_net virtio_blk virtio_pci virtio_pci_modern_dev virtio_ring virtio crc32c_vpmsum [last unloaded: virtio_console] [ 124.987209][ T52] CPU: 2 PID: 52 Comm: kworker/2:1 Not tainted 5.14.0-rc4 #4 [ 124.987259][ T52] Workqueue: events control_work_handler [virtio_console] [ 124.987307][ T52] NIP: c008000001a86044 LR: c008000001a82cf8 CTR: c00000000042a6c0 [ 124.987358][ T52] REGS: c00000000b273770 TRAP: 0300 Not tainted (5.14.0-rc4) [ 124.987406][ T52] MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 82002882 XER: 00000004 [ 124.987475][ T52] CFAR: c008000001a82cf4 DAR: c008000001a86058 DSISR: 40000000 IRQMASK: 0 [ 124.987475][ T52] GPR00: c008000001a82ce8 c00000000b273a10 c008000001ab8000 c000000010731320 [ 124.987475][ T52] GPR04: 0000000000000001 0000000000000000 0000000000000000 0000000000000000 [ 124.987475][ T52] GPR08: 0000000000000000 0000000000000000 0000000000000000 c008000001a86038 [ 124.987475][ T52] GPR12: 0000000022002884 c0000001ffffdf00 c000000000169ae8 c0000000037700c0 [ 124.987475][ T52] GPR16: 0000000000000000 0000000000000000 c000000021af0000 c000000003313900 [ 124.987475][ T52] GPR20: 0000000000000001 0000000000000000 0000000000000000 c000000003316780 [ 124.987475][ T52] GPR24: c008000001a90288 0000000000000000 0000000000000000 c000000010731320 [ 124.987475][ T52] GPR28: c000000003316900 0000000000000018 0000000000000068 c00000000379c5a0 [ 124.988028][ T52] NIP [c008000001a86044] fini+0x824/0xa7e0 [virtio_console] [ 124.988085][ T52] LR [c008000001a82cf8] fill_queue+0xb0/0x230 [virtio_console] [ 124.988141][ T52] Call Trace: [ 124.988171][ T52] [c00000000b273a10] [c008000001a82ce8] fill_queue+0xa0/0x230 [virtio_console] (unreliable) [ 124.988246][ T52] [c00000000b273aa0] [c008000001a83208] add_port.isra.0+0x1a0/0x4b0 [virtio_console] [ 124.988312][ T52] [c00000000b273b70] [c008000001a85474] control_work_handler+0x46c/0x654 [virtio_console] [ 124.988403][ T52] [c00000000b273c70] [c00000000015ce60] process_one_work+0x2a0/0x570 [ 124.988586][ T52] [c00000000b273d10] [c00000000015d1d8] worker_thread+0xa8/0x660 [ 124.988684][ T52] [c00000000b273da0] [c000000000169c5c] kthread+0x17c/0x190 [ 124.988762][ T52] [c00000000b273e10] [c00000000000cf54] ret_from_kernel_thread+0x5c/0x64 [ 124.988916][ T52] Instruction dump: [ 124.988965][ T52] 396be010 f8410018 e98b0020 7d8903a6 4e800420 00000000 73747562 003a0300 [ 124.989152][ T52] c0000000 3d62fffd 396be038 f8410018 <e98b0020> 7d8903a6 4e800420 00000000 [ 124.989298][ T52] ---[ end trace ab9046c024eb3154 ]---
I guess it depends on the timing of which pte is invalidated.
Quoted 3 lines
Anyway, this is what Murilo and I found out over our debugging session in the past couple of days. I hope it helps. =)
Yes it does, thanks heaps.
Quoted 1 line
PATCH v15 8/9 powerpc/mm: implement set_memory_attr()
In reply to Jordan NietheFrom: Christophe Leroy <[email protected]>
In addition to the set_memory_xx() functions which allows to change the memory attributes of not (yet) used memory regions, implement a set_memory_attr() function to:
- set the final memory protection after init on currently used kernel regions.
- enable/disable kernel memory regions in the scope of DEBUG_PAGEALLOC.
Unlike the set_memory_xx() which can act in three step as the regions are unused, this function must modify 'on the fly' as the kernel is executing from them. At the moment only PPC32 will use it and changing page attributes on the fly is not an issue.
--- arch/powerpc/include/asm/set_memory.h | 2 ++ arch/powerpc/mm/pageattr.c | 33 +++++++++++++++++++++++++++ 2 files changed, 35 insertions(+)
arch/powerpc/include/asm/set_memory.h +2 -0
@@ -29,4 +29,6 @@ static inline int set_memory_x(unsigned long addr, int numpages) return change_memory_attr(addr, numpages, SET_MEMORY_X); } +int set_memory_attr (unsigned long addr,int numpages,pgprot_t prot); +#endif
arch/powerpc/mm/pageattr.c +33 -0
@@ -99,3 +99,36 @@ int change_memory_attr(unsigned long addr, int numpages, long action)return apply_to_existing_page_range (&init_mm, start, size, change_page_attr, (void *)action); } + +/* +* Set the attributes of a page: +* +* This function is used by PPC32 at the end of init to set final kernel memory +* protection. It includes changing the maping of the page it is executing from +* and data pages it is using. +*/ +static int set_page_attr (pte_t *ptep,unsigned long addr,void *data) +{ +pgprot_t prot =__pgprot ((unsigned long )data); + +spin_lock (&init_mm.page_table_lock); + +set_pte_at (&init_mm, addr, ptep,pte_modify (*ptep, prot)); +flush_tlb_kernel_range (addr, addr +PAGE_SIZE ); + +spin_unlock (&init_mm.page_table_lock); + +return 0 ; +} + +int set_memory_attr (unsigned long addr,int numpages,pgprot_t prot) +{ +unsigned long start =ALIGN_DOWN (addr,PAGE_SIZE ); +unsigned long sz = numpages *PAGE_SIZE ; + +if (numpages <=0 ) +return 0 ; + +return apply_to_existing_page_range (&init_mm, start, sz, set_page_attr, + (void *)pgprot_val (prot)); +}
Signature · 1 line
2.25.1
PATCH v15 9/9 powerpc/32: use set_memory_attr()
In reply to Jordan NietheFrom: Christophe Leroy <[email protected]>
Use set_memory_attr() instead of the PPC32 specific change_page_attr()
change_page_attr() was checking that the address was not mapped by blocks and was handling highmem, but that's unneeded because the affected pages can't be in highmem and block mapping verification is already done by the callers.
--- arch/powerpc/mm/pgtable_32.c | 60 ++++++------------------------------ 1 file changed, 10 insertions(+), 50 deletions(-)
arch/powerpc/mm/pgtable_32.c +10 -50
@@ -23,6 +23,7 @@#include <linux/highmem.h> #include <linux/memblock.h> #include <linux/slab.h> +#include <linux/set_memory.h> #include <asm/pgalloc.h> #include <asm/fixmap.h>
@@ -132,64 +133,20 @@ void __init mapin_ram(void) } } -static int __change_page_attr_noflush (struct page *page,pgprot_t prot) -{ -pte_t *kpte; -unsigned long address; - -BUG_ON (PageHighMem (page)); - address = (unsigned long )page_address (page); - -if (v_block_mapped (address)) -return 0 ; - kpte =virt_to_kpte (address); -if (!kpte) -return -EINVAL ; -__set_pte_at (&init_mm, address, kpte,mk_pte (page, prot),0 ); - -return 0 ; -} - -/* -* Change the page attributes of an page in the linear mapping. -* -* THIS DOES NOTHING WITH BAT MAPPINGS, DEBUG USE ONLY -*/ -static int change_page_attr (struct page *page,int numpages,pgprot_t prot) -{ -int i, err =0 ; -unsigned long flags; -struct page *start = page; - -local_irq_save (flags); -for (i =0 ; i < numpages; i++, page++) { - err =__change_page_attr_noflush (page, prot); -if (err) -break ; - } -wmb (); -local_irq_restore (flags); -flush_tlb_kernel_range ((unsigned long )page_address (start), - (unsigned long )page_address (page)); -return err; -} -void mark_initmem_nx (void ) { -struct page *page =virt_to_page (_sinittext);unsigned long numpages =PFN_UP ((unsigned long )_einittext) -PFN_DOWN ((unsigned long )_sinittext);if (v_block_mapped ((unsigned long )_sinittext))mmu_mark_initmem_nx ();else -change_page_attr (page, numpages,PAGE_KERNEL ); +set_memory_attr ((unsigned long )_sinittext, numpages,PAGE_KERNEL ); }#ifdef CONFIG_STRICT_KERNEL_RWX void mark_rodata_ro (void ) { -struct page *page;unsigned long numpages;if (v_block_mapped ((unsigned long )_stext +1 )) {
@@ -198,20 +155,18 @@ void mark_rodata_ro(void)return ; } - page =virt_to_page (_stext); numpages =PFN_UP ((unsigned long )_etext) -PFN_DOWN ((unsigned long )_stext); -change_page_attr (page, numpages,PAGE_KERNEL_ROX ); +set_memory_attr ((unsigned long )_stext, numpages,PAGE_KERNEL_ROX );/* * mark .rodata as read only. Use __init_begin rather than __end_rodata * to cover NOTES and EXCEPTION_TABLE. */ - page =virt_to_page (__start_rodata); numpages =PFN_UP ((unsigned long )__init_begin) -PFN_DOWN ((unsigned long )__start_rodata); -change_page_attr (page, numpages,PAGE_KERNEL_RO ); +set_memory_attr ((unsigned long )__start_rodata, numpages,PAGE_KERNEL_RO );// mark_initmem_nx() should have already run by now ptdump_check_wx ();
@@ -221,9 +176,14 @@ void mark_rodata_ro(void)#ifdef CONFIG_DEBUG_PAGEALLOC void __kernel_map_pages (struct page *page,int numpages,int enable) { +unsigned long addr = (unsigned long )page_address (page); +if (PageHighMem (page))return ; -change_page_attr (page, numpages, enable ?PAGE_KERNEL :__pgprot (0 )); +if (enable) +set_memory_attr (addr, numpages,PAGE_KERNEL ); +else +set_memory_attr (addr, numpages,__pgprot (0 )); }#endif /* CONFIG_DEBUG_PAGEALLOC */
Signature · 1 line
2.25.1
Michael Ellerman
AppliedQuoted 9 lines · Jordan Niethe
Adding more Strict RWX support on powerpc, in particular Strict Module RWX. It is now rebased on ppc next.
For reference the previous revision is available here:
https://lore.kernel.org/linuxppc-dev/[email protected]/Changes for v15:
[...]
Applied to powerpc/next.
[1/9] powerpc/mm: Implement set_memory() routines
https://git.kernel.org/powerpc/c/1f9ad21c3b384a8f16d8c46845a48a01d281a603 [2/9] powerpc/lib/code-patching: Set up Strict RWX patching earlier https://git.kernel.org/powerpc/c/71a5b3db9f209ea5d1e07371017e65398d3c6fbc [3/9] powerpc/modules: Make module_alloc() Strict Module RWX aware https://git.kernel.org/powerpc/c/4fcc636615b1a309b39cab101a2b433cbf1f63f1 [4/9] powerpc/kprobes: Mark newly allocated probes as ROX https://git.kernel.org/powerpc/c/6a3a58e6230dc5b646ce3511436d7e74fc7f764b [5/9] powerpc/bpf: Remove bpf_jit_free() https://git.kernel.org/powerpc/c/bc33cfdb0bb84d9e4b125a617a437c29ddcac4d9 [6/9] powerpc/bpf: Write protect JIT code https://git.kernel.org/powerpc/c/62e3d4210ac9c35783d0e8fc306df4239c540a79 [7/9] powerpc: Set ARCH_HAS_STRICT_MODULE_RWX https://git.kernel.org/powerpc/c/c35717c71e983ed55d61e523cbd11a798429bc82 [8/9] powerpc/mm: implement set_memory_attr() https://git.kernel.org/powerpc/c/4d1755b6a762149ae022a32fb2bbeefb6680baa6 [9/9] powerpc/32: use set_memory_attr() https://git.kernel.org/powerpc/c/c988cfd38e489d9390d253d4392590daf451d87a
cheers