ASoC: qcom: Fix for DMA interrupt clear reg overwriting
Subsystems (4)
PATCH v3 1/1 ASoC: qcom: Fix for DMA interrupt clear reg overwriting
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
---
Changes since v2:
-- Removed redundant variables.
Changes since v1:
-- Subject lines changed.
sound/soc/qcom/lpass-platform.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
sound/soc/qcom/lpass-platform.c +6 -6
@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,return -EINVAL ; } - ret =regmap_write (map, reg_irqclr, val_irqclr); + ret =regmap_update_bits (map, reg_irqclr, val_irqclr, val_irqclr);if (ret) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , ret);return ret;
@@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(struct lpass_variant *v = drvdata->variant;irqreturn_t ret =IRQ_NONE ;int rv; -unsigned int reg =0 , val =0 ; +unsigned int reg, val, mask;struct regmap *map;unsigned int dai_id = cpu_dai->driver->id; + mask =LPAIF_IRQ_ALL (chan);switch (dai_id) {case LPASS_DP_RX : map = drvdata->hdmiif_map;
@@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(return -EINVAL ; }if (interrupts &LPAIF_IRQ_PER (chan)) { - - rv =regmap_write (map, reg,LPAIF_IRQ_PER (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_PER (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);
@@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_XRUN (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_XRUN (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_XRUN (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);
@@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_ERR (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_ERR (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_ERR (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);
Signature · 2 lines
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Quoted 10 lines · Srinivasa Rao Mandadapu
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Fixes commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")Signed-off-by Srinivasa Rao Mandadapu <[email protected]>
LGTM
--srini
Quoted 63 lines
---
Changes since v2:
-- Removed redundant variables.
Changes since v1:
-- Subject lines changed.sound/soc/qcom/lpass-platform.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)sound/soc/qcom/lpass-platform.c +6
-6@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,return -EINVAL ; } - ret =regmap_write (map, reg_irqclr, val_irqclr); + ret =regmap_update_bits (map, reg_irqclr, val_irqclr, val_irqclr);if (ret) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , ret);return ret;@@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(struct lpass_variant *v = drvdata->variant;irqreturn_t ret =IRQ_NONE ;int rv; -unsigned int reg =0 , val =0 ; +unsigned int reg, val, mask;struct regmap *map;unsigned int dai_id = cpu_dai->driver->id; + mask =LPAIF_IRQ_ALL (chan);switch (dai_id) {case LPASS_DP_RX : map = drvdata->hdmiif_map;@@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(return -EINVAL ; }if (interrupts &LPAIF_IRQ_PER (chan)) { - - rv =regmap_write (map, reg,LPAIF_IRQ_PER (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_PER (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);@@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_XRUN (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_XRUN (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_XRUN (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);@@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_ERR (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_ERR (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_ERR (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);
Mark Brown
maintainerQuoted 8 lines · Srinivasa Rao Mandadapu
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: qcom: Fix for DMA interrupt clear reg overwriting
commit: da0363f7bfd3c32f8d5918e40bfddb9905c86ee1
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Hi,
Quoted 10 lines · Srinivasa Rao Mandadapu
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Fixes commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")Signed-off-by Srinivasa Rao Mandadapu <[email protected]>
This patch landed recently in linux-next as commit da0363f7bfd3 ("ASoC:
qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts). After applying this patch, running 'speaker-test -l1' never finishes. There is no error nor kernel warning message. Before that commit, the playback worked fine on that board.
Quoted 54 lines
---
Changes since v2:
-- Removed redundant variables.
Changes since v1:
-- Subject lines changed.sound/soc/qcom/lpass-platform.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)sound/soc/qcom/lpass-platform.c +5
-5@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,return -EINVAL ; } - ret =regmap_write (map, reg_irqclr, val_irqclr); + ret =regmap_update_bits (map, reg_irqclr, val_irqclr, val_irqclr);if (ret) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , ret);return ret;@@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(struct lpass_variant *v = drvdata->variant;irqreturn_t ret =IRQ_NONE ;int rv; -unsigned int reg =0 , val =0 ; +unsigned int reg, val, mask;struct regmap *map;unsigned int dai_id = cpu_dai->driver->id; + mask =LPAIF_IRQ_ALL (chan);switch (dai_id) {case LPASS_DP_RX : map = drvdata->hdmiif_map;@@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(return -EINVAL ; }if (interrupts &LPAIF_IRQ_PER (chan)) { - - rv =regmap_write (map, reg,LPAIF_IRQ_PER (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_PER (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);@@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_XRUN (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_XRUN (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_XRUN (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);
sound/soc/qcom/lpass-platform.c static irqreturn_t lpass_dma_interrupt_handler( · line 706
Quoted 8 lines
sound/soc/qcom/lpass-platform.c +1
-1@@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_ERR (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_ERR (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_ERR (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland
Hi Marek,
Thanks for testing next and reporting this back.
Quoted 12 lines · Marek Szyprowski
Hi,
Quoted 9 lines · Srinivasa Rao Mandadapu
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Fixes commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
Quoted 8 lines
Quoted 1 line
Signed-off-by Srinivasa Rao Mandadapu <[email protected]>This patch landed recently in linux-next as commit
da0363f7bfd3("ASoC:
qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts). After applying this patch, running 'speaker-test -l1' never finishes. There is no error nor kernel warning message. Before that commit, the playback worked fine on that board.
TBH, I should have looked at the hw register description that is being updated in the patch. This is a software write only and hardware readable register for which update_bits really does not make sense at all. While digging out I found an issue with regmap_cache reads which should have reported an error while attempting to even do this. I sent out a patch to fix this.
Now for this patch itself, We should send a patch to revert it.
thanks,
srini
Quoted 66 lines
Quoted 55 lines
---
Changes since v2:
-- Removed redundant variables.
Changes since v1:
-- Subject lines changed.sound/soc/qcom/lpass-platform.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)sound/soc/qcom/lpass-platform.c +5
-5@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,return -EINVAL ; } - ret =regmap_write (map, reg_irqclr, val_irqclr); + ret =regmap_update_bits (map, reg_irqclr, val_irqclr, val_irqclr);if (ret) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , ret);return ret;@@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(struct lpass_variant *v = drvdata->variant;irqreturn_t ret =IRQ_NONE ;int rv; -unsigned int reg =0 , val =0 ; +unsigned int reg, val, mask;struct regmap *map;unsigned int dai_id = cpu_dai->driver->id; + mask =LPAIF_IRQ_ALL (chan);switch (dai_id) {case LPASS_DP_RX : map = drvdata->hdmiif_map;@@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(return -EINVAL ; }if (interrupts &LPAIF_IRQ_PER (chan)) { - - rv =regmap_write (map, reg,LPAIF_IRQ_PER (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_PER (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);@@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_XRUN (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_XRUN (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_XRUN (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);sound/soc/qcom/lpass-platform.c static irqreturn_t lpass_dma_interrupt_handler( · line 706
Quoted 8 lines
sound/soc/qcom/lpass-platform.c +1
-1@@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_ERR (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_ERR (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_ERR (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);Best regards
Hi Marek/Srinivasa,
Quoted 14 lines · Marek Szyprowski
Hi,
Quoted 10 lines · Srinivasa Rao Mandadapu
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Fixes commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")Signed-off-by Srinivasa Rao Mandadapu <[email protected]>
Can you please try this patch and let us know if this fixes the issue
------------------------->cut<-------------------------------
Author: Srinivas Kandagatla <[email protected]> Date: Mon Jun 21 12:38:43 2021 +0100
ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
Currently IRQ_CLEAR register is marked as write-only, however using regmap_update_bits on this register will have some side effects. so mark IRQ_CLEAR register appropriately as readable and volatile.
sound/soc/qcom/lpass-cpu.c +6 -1
@@ -525,6 +525,8 @@ static bool lpass_cpu_regmap_readable(struct device *dev, unsigned int reg)return true;for (i =0 ; i < v->irq_ports; ++i) { +if (reg ==LPAIF_IRQCLEAR_REG (v, i)) +return true;if (reg ==LPAIF_IRQEN_REG (v, i))return true;if (reg ==LPAIF_IRQSTAT_REG (v, i))
@@ -566,9 +568,12 @@ static bool lpass_cpu_regmap_volatile(struct device *dev, unsigned int reg)struct lpass_variant *v = drvdata->variant;int i; -for (i =0 ; i < v->irq_ports; ++i) +for (i =0 ; i < v->irq_ports; ++i) { +if (reg ==LPAIF_IRQCLEAR_REG (v, i)) +return true;if (reg ==LPAIF_IRQSTAT_REG (v, i))return true; + }for (i =0 ; i < v->rdma_channels; ++i)if (reg ==LPAIF_RDMACURR_REG (v, i))
------------------------->cut<-------------------------------
--srini
Quoted 72 lines
This patch landed recently in linux-next as commit
da0363f7bfd3("ASoC:
qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts). After applying this patch, running 'speaker-test -l1' never finishes. There is no error nor kernel warning message. Before that commit, the playback worked fine on that board.Quoted 54 lines
---
Changes since v2:
-- Removed redundant variables.
Changes since v1:
-- Subject lines changed.sound/soc/qcom/lpass-platform.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)sound/soc/qcom/lpass-platform.c +5
-5@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,return -EINVAL ; } - ret =regmap_write (map, reg_irqclr, val_irqclr); + ret =regmap_update_bits (map, reg_irqclr, val_irqclr, val_irqclr);if (ret) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , ret);return ret;@@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(struct lpass_variant *v = drvdata->variant;irqreturn_t ret =IRQ_NONE ;int rv; -unsigned int reg =0 , val =0 ; +unsigned int reg, val, mask;struct regmap *map;unsigned int dai_id = cpu_dai->driver->id; + mask =LPAIF_IRQ_ALL (chan);switch (dai_id) {case LPASS_DP_RX : map = drvdata->hdmiif_map;@@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(return -EINVAL ; }if (interrupts &LPAIF_IRQ_PER (chan)) { - - rv =regmap_write (map, reg,LPAIF_IRQ_PER (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_PER (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);@@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_XRUN (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_XRUN (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_XRUN (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);sound/soc/qcom/lpass-platform.c static irqreturn_t lpass_dma_interrupt_handler( · line 706
Quoted 8 lines
sound/soc/qcom/lpass-platform.c +1
-1@@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler( }if (interrupts &LPAIF_IRQ_ERR (chan)) { - rv =regmap_write (map, reg,LPAIF_IRQ_ERR (chan) | val); + rv =regmap_update_bits (map, reg, mask, (LPAIF_IRQ_ERR (chan) | val));if (rv) {dev_err (soc_runtime->dev,"error writing to irqclear reg: %d\n" , rv);Best regards
Marek Szyprowski
Tested-byHi,
Quoted 21 lines · Srinivas Kandagatla
Quoted 9 lines · Marek Szyprowski
Quoted 7 lines · Srinivasa Rao Mandadapu
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Quoted 4 lines
Quoted 3 lines
Fixes commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")Signed-off-by Srinivasa Rao Mandadapu <[email protected]>Can you please try this patch and let us know if this fixes the issue
------------------------->cut<-------------------------------
Author: Srinivas Kandagatla <[email protected]> Date: Mon Jun 21 12:38:43 2021 +0100
Quoted 8 lines
ASoC: qcom: lpass-cpu: mark
IRQ_CLEARregister as volatile and readableCurrently
IRQ_CLEARregister is marked as write-only, however usingregmap_update_bitson this register will have some side effects. so markIRQ_CLEARregister appropriately as readable and volatile.Signed-off-by Srinivas Kandagatla <[email protected]>
This fixes the issue observed on DragonBoard410c. Feel free to add:
Quoted 30 lines
sound/soc/qcom/lpass-cpu.c +2
-0@@ -525,6 +525,8 @@ static bool lpass_cpu_regmap_readable(struct device *dev, unsigned int reg) return true; for (i = 0; i < v->irq_ports; ++i) { + if (reg == LPAIF_IRQCLEAR_REG(v, i)) + return true; if (reg == LPAIF_IRQEN_REG(v, i)) return true;if (reg ==
LPAIF_IRQSTAT_REG(v, i))sound/soc/qcom/lpass-cpu.c +4
-1@@ -566,9 +568,12 @@ static bool lpass_cpu_regmap_volatile(struct device *dev, unsigned int reg) struct lpass_variant *v = drvdata->variant; int i; - for (i = 0; i < v->irq_ports; ++i) + for (i = 0; i < v->irq_ports; ++i) { + if (reg == LPAIF_IRQCLEAR_REG(v, i)) + return true; if (reg == LPAIF_IRQSTAT_REG(v, i)) return true; + } for (i = 0; i < v->rdma_channels; ++i)if (reg ==
LPAIF_RDMACURR_REG(v, i))
Quoted 78 lines
------------------------->cut<-------------------------------
--srini
Quoted 73 lines
This patch landed recently in linux-next as commit
da0363f7bfd3("ASoC:
qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts). After applying this patch, running 'speaker-test -l1' never finishes. There is no error nor kernel warning message. Before that commit, the playback worked fine on that board.Quoted 65 lines
---
Changes since v2:
-- Removed redundant variables.
Changes since v1:
-- Subject lines changed.sound/soc/qcom/lpass-platform.c| 12 ++++++------1 file changed, 6 insertions(+), 6 deletions(-)sound/soc/qcom/lpass-platform.c +1
-0@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(structsnd_soc_component *component, return -EINVAL; } - ret = regmap_write(map, reg_irqclr, val_irqclr); + ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr); if (ret) {dev_err(soc_runtime->dev, "error writing to irqclear
reg: %d\n", ret);
return ret;sound/soc/qcom/lpass-platform.c +1
-1@@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler( struct lpass_variant *v = drvdata->variant; irqreturn_t ret = IRQ_NONE; int rv; - unsigned int reg = 0, val = 0; + unsigned int reg, val, mask; struct regmap *map; unsigned int dai_id = cpu_dai->driver->id; + mask = LPAIF_IRQ_ALL(chan); switch (dai_id) {case
LPASS_DP_RX:
map =drvdata->hdmiif_map;sound/soc/qcom/lpass-platform.c +1
-2@@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler( return -EINVAL; } if (interrupts & LPAIF_IRQ_PER(chan)) { - - rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val); + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_PER (chan) | val)); if (rv) { dev_err(soc_runtime->dev,"error writing to irqclear reg: %d\n", rv);
sound/soc/qcom/lpass-platform.c +2
-2@@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler( } if (interrupts & LPAIF_IRQ_XRUN(chan)) { - rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val); + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_XRUN (chan) | val)); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv);@@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler( } if (interrupts & LPAIF_IRQ_ERR(chan)) { - rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val); + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_ERR (chan) | val)); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv);
Best regards
Signature · 2 lines
Marek Szyprowski, PhD Samsung R&D Institute Poland