Skip to contentSkip to conversation

igc: Add support for RX Flex Filters

PATCH Superseded Vinicius Costa Gomes 4 participants 15 messages Jun 11, 2021 – Jun 22, 2021

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover igc: Add support for RX Flex Filters

Hi,

Add support for steering traffic to specific RX queues using Flex Filters.

As the name implies, Flex Filters are more flexible than using Layer-2, VLAN or MAC address filters, one of the reasons is that they allow "AND" operations more easily, e.g. when the user wants to steer some traffic based on the source MAC address and the packet ethertype.

Future work include adding support for offloading tc-u32 filters to the hardware.

The series is divided as follows:

Patch 1/5, add the low level primitives for configuring Flex filters.

Patch 2/5 and 3/5, allow ethtool to manage Flex filters.

Patch 4/5, when specifying filters that have multiple predicates, use Flex filters.

Patch 5/5, Adds support for exposing the i225 LEDs using the LED subsystem.

Cheers,

Kurt Kanzenbach (4):
igc: Add possibility to add flex filter
igc: Integrate flex filter into ethtool ops
igc: Make flex filter more flexible
igc: Export LEDs

Vinicius Costa Gomes (1):
igc: Allow for Flex Filters to be installed

 drivers/net/ethernet/intel/Kconfig           |   1 +
 drivers/net/ethernet/intel/igc/igc.h         |  48 +-
 drivers/net/ethernet/intel/igc/igc_defines.h |  62 ++-
 drivers/net/ethernet/intel/igc/igc_ethtool.c |  41 +-
 drivers/net/ethernet/intel/igc/igc_main.c    | 450 ++++++++++++++++++-
 drivers/net/ethernet/intel/igc/igc_regs.h    |  19 +
 6 files changed, 597 insertions(+), 24 deletions(-)
Signature · 1 line
2.32.0
#1 lore raw

PATCH 1/5 igc: Add possibility to add flex filter

From: Kurt Kanzenbach <[email protected]>

The Intel i225 NIC has the possibility to add flex filters which can match up to the first 128 byte of a packet. These filters are useful for all kind of packet matching. One particular use case is Profinet, as the different traffic classes are distinguished by the frame id range which cannot be matched by any other means.

Add code to configure and enable flex filters.

---
 drivers/net/ethernet/intel/igc/igc.h         |  13 ++
 drivers/net/ethernet/intel/igc/igc_defines.h |  48 ++++++-
 drivers/net/ethernet/intel/igc/igc_main.c    | 134 +++++++++++++++++++
 drivers/net/ethernet/intel/igc/igc_regs.h    |  17 +++
 4 files changed, 207 insertions(+), 5 deletions(-)
drivers/net/ethernet/intel/igc/igc.h +13 -0
index 5901ed9fb545..6016c132d981 100644
@@ -33,6 +33,8 @@ void igc_ethtool_set_ops(struct net_device *);
 #define IGC_N_PEROUT	2
 #define IGC_N_SDP	4
 
+#define MAX_FLEX_FILTER			32
+
 enum igc_mac_filter_type {
 	IGC_MAC_FILTER_TYPE_DST = 0,
 	IGC_MAC_FILTER_TYPE_SRC
@@ -502,6 +504,17 @@ struct igc_nfc_rule {
  */
 #define IGC_MAX_RXNFC_RULES		32
 
+struct igc_flex_filter {
+	u8 index;
+	u8 data[128];
+	u8 mask[16];
+	u8 length;
+	u8 rx_queue;
+	u8 prio;
+	u8 immediate_irq;
+	u8 drop;
+};
+
 /* igc_desc_unused - calculate if we have unused descriptors */
 static inline u16 igc_desc_unused(const struct igc_ring *ring)
 {
drivers/net/ethernet/intel/igc/igc_defines.h +43 -5

60 lines not on this page · raw message

drivers/net/ethernet/intel/igc/igc_main.c +134 -0

140 lines not on this page · raw message

drivers/net/ethernet/intel/igc/igc_regs.h +17 -0
index 0f82990567d9..828c3501c448 100644
@@ -67,6 +67,9 @@
 
 /* Filtering Registers */
 #define IGC_ETQF(_n)		(0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
+#define IGC_FHFT(_n)		(0x09000 + (256 * (_n))) /* Flexible Host Filter */
+#define IGC_FHFT_EXT(_n)	(0x09A00 + (256 * (_n))) /* Flexible Host Filter Extended */
+#define IGC_FHFTSL		0x05804 /* Flex Filter indirect table select */
 
 /* ETQF register bit definitions */
 #define IGC_ETQF_FILTER_ENABLE	BIT(26)
@@ -75,6 +78,19 @@
 #define IGC_ETQF_QUEUE_MASK	0x00070000
 #define IGC_ETQF_ETYPE_MASK	0x0000FFFF
 
+/* FHFT register bit definitions */
+#define IGC_FHFT_LENGTH_MASK	GENMASK(7, 0)
+#define IGC_FHFT_QUEUE_SHIFT	8
+#define IGC_FHFT_QUEUE_MASK	GENMASK(10, 8)
+#define IGC_FHFT_PRIO_SHIFT	16
+#define IGC_FHFT_PRIO_MASK	GENMASK(18, 16)
+#define IGC_FHFT_IMM_INT	BIT(24)
+#define IGC_FHFT_DROP		BIT(25)
+
+/* FHFTSL register bit definitions */
+#define IGC_FHFTSL_FTSL_SHIFT	0
+#define IGC_FHFTSL_FTSL_MASK	GENMASK(1, 0)
+
 /* Redirection Table - RW Array */
 #define IGC_RETA(_i)		(0x05C00 + ((_i) * 4))
 /* RSS Random Key - RW Array */
@@ -240,6 +256,7 @@
 #define IGC_WUFC	0x05808  /* Wakeup Filter Control - RW */
 #define IGC_WUS		0x05810  /* Wakeup Status - R/W1C */
 #define IGC_WUPL	0x05900  /* Wakeup Packet Length - RW */
+#define IGC_WUFC_EXT	0x0580C  /* Wakeup Filter Control Register Extended - RW */
 
 /* Wake Up packet memory */
 #define IGC_WUPM_REG(_i)	(0x05A00 + ((_i) * 4))
Signature · 1 line
2.32.0
#2 lore raw

PATCH 1/5 igc: Add possibility to add flex filter

Quoted 13 lines · Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

The Intel i225 NIC has the possibility to add flex filters which can match up to the first 128 byte of a packet. These filters are useful for all kind of packet matching. One particular use case is Profinet, as the different traffic classes are distinguished by the frame id range which cannot be matched by any other means.

Add code to configure and enable flex filters.

Quoted 7 lines
---
  drivers/net/ethernet/intel/igc/igc.h         |  13 ++
  drivers/net/ethernet/intel/igc/igc_defines.h |  48 ++++++-
  drivers/net/ethernet/intel/igc/igc_main.c    | 134 +++++++++++++++++++
  drivers/net/ethernet/intel/igc/igc_regs.h    |  17 +++
  4 files changed, 207 insertions(+), 5 deletions(-)
#3 lore raw

PATCH 2/5 igc: Integrate flex filter into ethtool ops

In reply to Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan.

The matching pattern looks like this:

* dest_mac [6]
* src_mac [6]
* tpid [2]
* vlan tci [2]
* ether type [2]
* user data [8]

This can be used to match Profinet traffic classes by FrameID range.

---
 drivers/net/ethernet/intel/igc/igc.h         |  24 ++-
 drivers/net/ethernet/intel/igc/igc_defines.h |   4 +
 drivers/net/ethernet/intel/igc/igc_ethtool.c |  20 ++
 drivers/net/ethernet/intel/igc/igc_main.c    | 192 ++++++++++++++++++-
 4 files changed, 230 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/igc/igc.h +17 -7
index 6016c132d981..54a1779fa53a 100644
@@ -478,18 +478,28 @@ struct igc_q_vector {
 };
 
 enum igc_filter_match_flags {
-	IGC_FILTER_FLAG_ETHER_TYPE =	0x1,
-	IGC_FILTER_FLAG_VLAN_TCI   =	0x2,
-	IGC_FILTER_FLAG_SRC_MAC_ADDR =	0x4,
-	IGC_FILTER_FLAG_DST_MAC_ADDR =	0x8,
+	IGC_FILTER_FLAG_ETHER_TYPE =	BIT(0),
+	IGC_FILTER_FLAG_VLAN_TCI   =	BIT(1),
+	IGC_FILTER_FLAG_SRC_MAC_ADDR =	BIT(2),
+	IGC_FILTER_FLAG_DST_MAC_ADDR =	BIT(3),
+	IGC_FILTER_FLAG_USER_DATA =	BIT(4),
+	IGC_FILTER_FLAG_VLAN_ETYPE =	BIT(5),
 };
 
 struct igc_nfc_filter {
 	u8 match_flags;
 	u16 etype;
+	u16 vlan_etype;
 	u16 vlan_tci;
 	u8 src_addr[ETH_ALEN];
 	u8 dst_addr[ETH_ALEN];
+	u8 user_data[8];
+	u8 user_mask[8];
+	u8 flex_index;
+	u8 rx_queue;
+	u8 prio;
+	u8 immediate_irq;
+	u8 drop;
 };
 
 struct igc_nfc_rule {
@@ -499,10 +509,10 @@ struct igc_nfc_rule {
 	u16 action;
 };
 
-/* IGC supports a total of 32 NFC rules: 16 MAC address based,, 8 VLAN priority
- * based, and 8 ethertype based.
+/* IGC supports a total of 32 NFC rules: 16 MAC address based, 8 VLAN priority
+ * based, 8 ethertype based and 32 Flex filter based rules.
  */
-#define IGC_MAX_RXNFC_RULES		32
+#define IGC_MAX_RXNFC_RULES		64
 
 struct igc_flex_filter {
 	u8 index;
drivers/net/ethernet/intel/igc/igc_defines.h +4 -0
index 0a29d9eca634..7bdd0b1abf20 100644
@@ -32,6 +32,8 @@
 #define IGC_WUFC_FLX6		BIT(22)	   /* Flexible Filter 6 Enable */
 #define IGC_WUFC_FLX7		BIT(23)	   /* Flexible Filter 7 Enable */
 
+#define IGC_WUFC_FILTER_MASK GENMASK(23, 14)
+
 #define IGC_CTRL_ADVD3WUC	0x00100000  /* D3 WUC */
 
 /* Wake Up Status */
@@ -81,6 +83,8 @@
 #define IGC_WUFC_EXT_FLX30	BIT(30)	/* Flexible Filter 30 Enable */
 #define IGC_WUFC_EXT_FLX31	BIT(31)	/* Flexible Filter 31 Enable */
 
+#define IGC_WUFC_EXT_FILTER_MASK GENMASK(31, 8)
+
 /* Physical Func Reset Done Indication */
 #define IGC_CTRL_EXT_LINK_MODE_MASK	0x00C00000
 
drivers/net/ethernet/intel/igc/igc_ethtool.c +20 -0
index fa4171860623..3d46eff87638 100644
@@ -979,6 +979,12 @@ static int igc_ethtool_get_nfc_rule(struct igc_adapter *adapter,
 		eth_broadcast_addr(fsp->m_u.ether_spec.h_source);
 	}
 
+	if (rule->filter.match_flags & IGC_FILTER_FLAG_USER_DATA) {
+		fsp->flow_type |= FLOW_EXT;
+		memcpy(fsp->h_ext.data, rule->filter.user_data, sizeof(fsp->h_ext.data));
+		memcpy(fsp->m_ext.data, rule->filter.user_mask, sizeof(fsp->m_ext.data));
+	}
+
 	mutex_unlock(&adapter->nfc_rule_lock);
 	return 0;
 
@@ -1215,6 +1221,20 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule,
 		ether_addr_copy(rule->filter.dst_addr,
 				fsp->h_u.ether_spec.h_dest);
 	}
+
+	/* Check for user defined data */
+	if ((fsp->flow_type & FLOW_EXT) &&
+	    (fsp->h_ext.data[0] || fsp->h_ext.data[1])) {
+		rule->filter.match_flags |= IGC_FILTER_FLAG_USER_DATA;
+		memcpy(rule->filter.user_data, fsp->h_ext.data, sizeof(fsp->h_ext.data));
+		memcpy(rule->filter.user_mask, fsp->m_ext.data, sizeof(fsp->m_ext.data));
+
+		/* VLAN etype matching is only valid using flex filter */
+		if ((fsp->flow_type & FLOW_EXT) && fsp->h_ext.vlan_etype) {
+			rule->filter.vlan_etype = fsp->h_ext.vlan_etype;
+			rule->filter.match_flags |= IGC_FILTER_FLAG_VLAN_ETYPE;
+		}
+	}
 }
 
 /**
drivers/net/ethernet/intel/igc/igc_main.c +189 -3

220 lines not on this page · raw message

Signature · 1 line
2.32.0
#4 lore raw

PATCH 2/5 igc: Integrate flex filter into ethtool ops

Quoted 18 lines · Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan.

The matching pattern looks like this:

* dest_mac [6]
* src_mac [6]
* tpid [2]
* vlan tci [2]
* ether type [2]
* user data [8]

This can be used to match Profinet traffic classes by FrameID range.

Quoted 9 lines
---
  drivers/net/ethernet/intel/igc/igc.h         |  24 ++-
  drivers/net/ethernet/intel/igc/igc_defines.h |   4 +
  drivers/net/ethernet/intel/igc/igc_ethtool.c |  20 ++
  drivers/net/ethernet/intel/igc/igc_main.c    | 192 ++++++++++++++++++-
  4 files changed, 230 insertions(+), 10 deletions(-)
#5 lore raw

PATCH 2/5 igc: Integrate flex filter into ethtool ops

In reply to Vinicius Costa Gomes
Quoted 16 lines · Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan.

The matching pattern looks like this:

* dest_mac [6]
* src_mac [6]
* tpid [2]
* vlan tci [2]
* ether type [2]
* user data [8]

Quoted 5 lines

This can be used to match Profinet traffic classes by FrameID range.

---

I was preparing these patches for a pull request and came across a couple warnings. Could you address them before I send these on?

<snip>

Quoted 22 lines
drivers/net/ethernet/intel/igc/igc_ethtool.c +9 -0
@@ -1215,6 +1221,20 @@ static void igc_ethtool_init_nfc_rule(struct
 igc_nfc_rule *rule,
 		ether_addr_copy(rule->filter.dst_addr,
 				fsp->h_u.ether_spec.h_dest);
 	}
+
+	/* Check for user defined data */
+	if ((fsp->flow_type & FLOW_EXT) &&
+	    (fsp->h_ext.data[0] || fsp->h_ext.data[1])) {
+		rule->filter.match_flags |= IGC_FILTER_FLAG_USER_DATA;
+		memcpy(rule->filter.user_data, fsp->h_ext.data,
 sizeof(fsp->h_ext.data));
+		memcpy(rule->filter.user_mask, fsp->m_ext.data,
 sizeof(fsp->m_ext.data));
+
+		/* VLAN etype matching is only valid using flex filter

*/

(quoted diff) +1 -0
+		if ((fsp->flow_type & FLOW_EXT) && fsp-
Quoted 1 line

h_ext.vlan_etype) {

(quoted diff) +1 -0
+			rule->filter.vlan_etype = fsp-
Quoted 1 line

h_ext.vlan_etype;

(quoted diff) +1 -0
+			rule->filter.match_flags |=
Quoted 1 line

IGC_FILTER_FLAG_VLAN_ETYPE;

drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: warning:
incorrect type in assignment (different base types)
drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: expected
unsigned short [usertype] vlan_etype
drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: got restricted
__be16 const [usertype] vlan_etype

<snip>

Quoted 52 lines
drivers/net/ethernet/intel/igc/igc_main.c +43 -0
+static int igc_add_flex_filter(struct igc_adapter *adapter,
+			       struct igc_nfc_rule *rule)
+{
+	struct igc_flex_filter flex = { };
+	struct igc_nfc_filter *filter = &rule->filter;
+	unsigned int eth_offset, user_offset;
+	int ret, index;
+	bool vlan;
+
+	index = igc_find_avail_flex_filter_slot(adapter);
+	if (index < 0)
+		return -ENOSPC;
+
+	/* Construct the flex filter:
+	 *  -> dest_mac [6]
+	 *  -> src_mac [6]
+	 *  -> tpid [2]
+	 *  -> vlan tci [2]
+	 *  -> ether type [2]
+	 *  -> user data [8]
+	 *  -> = 26 bytes => 32 length
+	 */
+	flex.index    = index;
+	flex.length   = 32;
+	flex.rx_queue = rule->action;
+
+	vlan = rule->filter.vlan_tci || rule->filter.vlan_etype;
+	eth_offset = vlan ? 16 : 12;
+	user_offset = vlan ? 18 : 14;
+
+	/* Add destination MAC  */
+	if (rule->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR)
+		igc_flex_filter_add_field(&flex, &filter->dst_addr, 0,
+					  ETH_ALEN, NULL);
+
+	/* Add source MAC */
+	if (rule->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR)
+		igc_flex_filter_add_field(&flex, &filter->src_addr, 6,
+					  ETH_ALEN, NULL);
+
+	/* Add VLAN etype */
+	if (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_ETYPE)
+		igc_flex_filter_add_field(&flex, &filter->vlan_etype,

12,

drivers/net/ethernet/intel/igc/igc_main.c +7 -0
+					  sizeof(filter->vlan_etype),
+					  NULL);
+
+	/* Add VLAN TCI */
+	if (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_TCI)
+		igc_flex_filter_add_field(&flex, &filter->vlan_tci, 14,
+					  sizeof(filter->vlan_tci),

NULL);

drivers/net/ethernet/intel/igc/igc_main.c static int __maybe_unused igc_write_flex_filter_ll(struct igc_adapter *adapter, · line 3335

Quoted 4 lines
drivers/net/ethernet/intel/igc/igc_main.c +4 -0
+
+	/* Add Ether type */
+	if (rule->filter.match_flags & IGC_FILTER_FLAG_ETHER_TYPE) {
+		u16 etype = cpu_to_be16(filter->etype);

drivers/net/ethernet/intel/igc/igc_main.c:3332:29: warning: incorrect type in initializer (different base types)
drivers/net/ethernet/intel/igc/igc_main.c:3332:29: expected unsigned
short [usertype] etype
drivers/net/ethernet/intel/igc/igc_main.c:3332:29: got restricted
__be16 [usertype]

Quoted 4 lines
drivers/net/ethernet/intel/igc/igc_main.c +3 -0
+		igc_flex_filter_add_field(&flex, &etype, eth_offset,
+					  sizeof(etype), NULL);
+	}
#6 lore raw

PATCH 2/5 igc: Integrate flex filter into ethtool ops

Hi Tony,

Quoted 17 lines · Anthony L
Quoted 16 lines · Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan.

The matching pattern looks like this:

* dest_mac [6]
* src_mac [6]
* tpid [2]
* vlan tci [2]
* ether type [2]
* user data [8]

Quoted 8 lines
Quoted 5 lines

This can be used to match Profinet traffic classes by FrameID range.

---

I was preparing these patches for a pull request and came across a couple warnings. Could you address them before I send these on?

Sure thing. Sorry I missed those.

Quoted 27 lines

<snip>

Quoted 18 lines
drivers/net/ethernet/intel/igc/igc_ethtool.c +9 -0
@@ -1215,6 +1221,20 @@ static void igc_ethtool_init_nfc_rule(struct
 igc_nfc_rule *rule,
              ether_addr_copy(rule->filter.dst_addr,
                              fsp->h_u.ether_spec.h_dest);
      }
+
+     /* Check for user defined data */
+     if ((fsp->flow_type & FLOW_EXT) &&
+         (fsp->h_ext.data[0] || fsp->h_ext.data[1])) {
+             rule->filter.match_flags |= IGC_FILTER_FLAG_USER_DATA;
+             memcpy(rule->filter.user_data, fsp->h_ext.data,
 sizeof(fsp->h_ext.data));
+             memcpy(rule->filter.user_mask, fsp->m_ext.data,
 sizeof(fsp->m_ext.data));
+
+             /* VLAN etype matching is only valid using flex filter

*/
+ if ((fsp->flow_type & FLOW_EXT) && fsp-

Quoted 5 lines
Quoted 1 line

h_ext.vlan_etype) {

+ rule->filter.vlan_etype = fsp-

Quoted 1 line

h_ext.vlan_etype;

+ rule->filter.match_flags |=
IGC_FILTER_FLAG_VLAN_ETYPE;

Quoted 6 lines

drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: warning:
incorrect type in assignment (different base types)
drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: expected
unsigned short [usertype] vlan_etype
drivers/net/ethernet/intel/igc/igc_ethtool.c:1234:49: got restricted
__be16 const [usertype] vlan_etype

Will fix.

Quoted 58 lines

<snip>

Quoted 55 lines
drivers/net/ethernet/intel/igc/igc_main.c +43 -0
+static int igc_add_flex_filter(struct igc_adapter *adapter,
+                            struct igc_nfc_rule *rule)
+{
+     struct igc_flex_filter flex = { };
+     struct igc_nfc_filter *filter = &rule->filter;
+     unsigned int eth_offset, user_offset;
+     int ret, index;
+     bool vlan;
+
+     index = igc_find_avail_flex_filter_slot(adapter);
+     if (index < 0)
+             return -ENOSPC;
+
+     /* Construct the flex filter:
+      *  -> dest_mac [6]
+      *  -> src_mac [6]
+      *  -> tpid [2]
+      *  -> vlan tci [2]
+      *  -> ether type [2]
+      *  -> user data [8]
+      *  -> = 26 bytes => 32 length
+      */
+     flex.index    = index;
+     flex.length   = 32;
+     flex.rx_queue = rule->action;
+
+     vlan = rule->filter.vlan_tci || rule->filter.vlan_etype;
+     eth_offset = vlan ? 16 : 12;
+     user_offset = vlan ? 18 : 14;
+
+     /* Add destination MAC  */
+     if (rule->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR)
+             igc_flex_filter_add_field(&flex, &filter->dst_addr, 0,
+                                       ETH_ALEN, NULL);
+
+     /* Add source MAC */
+     if (rule->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR)
+             igc_flex_filter_add_field(&flex, &filter->src_addr, 6,
+                                       ETH_ALEN, NULL);
+
+     /* Add VLAN etype */
+     if (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_ETYPE)
+             igc_flex_filter_add_field(&flex, &filter->vlan_etype,

12,

drivers/net/ethernet/intel/igc/igc_main.c +7 -0
+                                       sizeof(filter->vlan_etype),
+                                       NULL);
+
+     /* Add VLAN TCI */
+     if (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_TCI)
+             igc_flex_filter_add_field(&flex, &filter->vlan_tci, 14,
+                                       sizeof(filter->vlan_tci),

NULL);

drivers/net/ethernet/intel/igc/igc_main.c +3 -0
+
+     /* Add Ether type */
+     if (rule->filter.match_flags & IGC_FILTER_FLAG_ETHER_TYPE) {
Quoted 8 lines
Quoted 1 line

+ u16 etype = cpu_to_be16(filter->etype);

drivers/net/ethernet/intel/igc/igc_main.c:3332:29: warning: incorrect type in initializer (different base types)
drivers/net/ethernet/intel/igc/igc_main.c:3332:29: expected unsigned
short [usertype] etype
drivers/net/ethernet/intel/igc/igc_main.c:3332:29: got restricted
__be16 [usertype]

Will fix.

Quoted 6 lines

drivers/net/ethernet/intel/igc/igc_main.c static int __maybe_unused igc_write_flex_filter_ll(struct igc_adapter *adapter, · line 3339

Quoted 6 lines
drivers/net/ethernet/intel/igc/igc_main.c +3 -0
+             igc_flex_filter_add_field(&flex, &etype, eth_offset,
+                                       sizeof(etype), NULL);
+     }

Cheers,

Signature · 1 line
Vinicius
#7 lore raw

PATCH 3/5 igc: Allow for Flex Filters to be installed

In reply to Vinicius Costa Gomes

Allows Flex Filters to be installed.

The previous restriction to the types of filters that can be installed can now be lifted.

---
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 6 ------
 1 file changed, 6 deletions(-)
drivers/net/ethernet/intel/igc/igc_ethtool.c +0 -6
index 3d46eff87638..5a7b27b2a95c 100644
@@ -1300,12 +1300,6 @@ static int igc_ethtool_add_nfc_rule(struct igc_adapter *adapter,
 		return -EOPNOTSUPP;
 	}
 
-	if ((fsp->flow_type & FLOW_EXT) &&
-	    fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK)) {
-		netdev_dbg(netdev, "VLAN mask not supported\n");
-		return -EOPNOTSUPP;
-	}
-
 	if (fsp->ring_cookie >= adapter->num_rx_queues) {
 		netdev_dbg(netdev, "Invalid action\n");
 		return -EINVAL;
Signature · 1 line
2.32.0
#8 lore raw

PATCH 3/5 igc: Allow for Flex Filters to be installed

Quoted 10 lines · Vinicius Costa Gomes

Allows Flex Filters to be installed.

The previous restriction to the types of filters that can be installed can now be lifted.

---
  drivers/net/ethernet/intel/igc/igc_ethtool.c | 6 ------
  1 file changed, 6 deletions(-)
#9 lore raw

PATCH 4/5 igc: Make flex filter more flexible

In reply to Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Currently flex filters are only used for filters containing user data. However, it makes sense to utilize them also for filters having multiple conditions, because that's not supported by the driver at the moment. Add it.

---
 drivers/net/ethernet/intel/igc/igc.h         |  1 +
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 27 ++++++++++++--------
 drivers/net/ethernet/intel/igc/igc_main.c    | 14 ++++------
 3 files changed, 22 insertions(+), 20 deletions(-)
drivers/net/ethernet/intel/igc/igc.h +1 -0
index 54a1779fa53a..5710e5420b40 100644
@@ -507,6 +507,7 @@ struct igc_nfc_rule {
 	struct igc_nfc_filter filter;
 	u32 location;
 	u16 action;
+	bool flex;
 };
 
 /* IGC supports a total of 32 NFC rules: 16 MAC address based, 8 VLAN priority
drivers/net/ethernet/intel/igc/igc_ethtool.c +16 -11
index 5a7b27b2a95c..d3e84416248e 100644
@@ -1222,19 +1222,29 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule,
 				fsp->h_u.ether_spec.h_dest);
 	}
 
+	/* VLAN etype matching */
+	if ((fsp->flow_type & FLOW_EXT) && fsp->h_ext.vlan_etype) {
+		rule->filter.vlan_etype = fsp->h_ext.vlan_etype;
+		rule->filter.match_flags |= IGC_FILTER_FLAG_VLAN_ETYPE;
+	}
+
 	/* Check for user defined data */
 	if ((fsp->flow_type & FLOW_EXT) &&
 	    (fsp->h_ext.data[0] || fsp->h_ext.data[1])) {
 		rule->filter.match_flags |= IGC_FILTER_FLAG_USER_DATA;
 		memcpy(rule->filter.user_data, fsp->h_ext.data, sizeof(fsp->h_ext.data));
 		memcpy(rule->filter.user_mask, fsp->m_ext.data, sizeof(fsp->m_ext.data));
-
-		/* VLAN etype matching is only valid using flex filter */
-		if ((fsp->flow_type & FLOW_EXT) && fsp->h_ext.vlan_etype) {
-			rule->filter.vlan_etype = fsp->h_ext.vlan_etype;
-			rule->filter.match_flags |= IGC_FILTER_FLAG_VLAN_ETYPE;
-		}
 	}
+
+	/* When multiple filter options or user data or vlan etype is set, use a
+	 * flex filter.
+	 */
+	if ((rule->filter.match_flags & IGC_FILTER_FLAG_USER_DATA) ||
+	    (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_ETYPE) ||
+	    (rule->filter.match_flags & (rule->filter.match_flags - 1)))
+		rule->flex = true;
+	else
+		rule->flex = false;
 }
 
 /**
@@ -1264,11 +1274,6 @@ static int igc_ethtool_check_nfc_rule(struct igc_adapter *adapter,
 		return -EINVAL;
 	}
 
-	if (flags & (flags - 1)) {
-		netdev_dbg(dev, "Rule with multiple matches not supported\n");
-		return -EOPNOTSUPP;
-	}
-
 	list_for_each_entry(tmp, &adapter->nfc_rule_list, list) {
 		if (!memcmp(&rule->filter, &tmp->filter,
 			    sizeof(rule->filter)) &&
drivers/net/ethernet/intel/igc/igc_main.c +5 -9
index 9abcecc57534..ac558a6defe7 100644
@@ -3391,14 +3391,8 @@ static int igc_enable_nfc_rule(struct igc_adapter *adapter,
 {
 	int err;
 
-	/* Check for user data first: When user data is set, the only option is
-	 * to use a flex filter. When more options are set (ethertype, vlan tci,
-	 * ...) construct a flex filter matching all of that.
-	 */
-	if (rule->filter.match_flags & IGC_FILTER_FLAG_USER_DATA) {
-		err = igc_add_flex_filter(adapter, rule);
-		if (err)
-			return err;
+	if (rule->flex) {
+		return igc_add_flex_filter(adapter, rule);
 	}
 
 	if (rule->filter.match_flags & IGC_FILTER_FLAG_ETHER_TYPE) {
@@ -3437,8 +3431,10 @@ static int igc_enable_nfc_rule(struct igc_adapter *adapter,
 static void igc_disable_nfc_rule(struct igc_adapter *adapter,
 				 const struct igc_nfc_rule *rule)
 {
-	if (rule->filter.match_flags & IGC_FILTER_FLAG_USER_DATA)
+	if (rule->flex) {
 		igc_del_flex_filter(adapter, rule->filter.flex_index);
+		return;
+	}
 
 	if (rule->filter.match_flags & IGC_FILTER_FLAG_ETHER_TYPE)
 		igc_del_etype_filter(adapter, rule->filter.etype);
Signature · 1 line
2.32.0
#10 lore raw

PATCH 4/5 igc: Make flex filter more flexible

Quoted 7 lines · Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Currently flex filters are only used for filters containing user data. However, it makes sense to utilize them also for filters having multiple conditions, because that's not supported by the driver at the moment. Add it.

Quoted 9 lines
---
  drivers/net/ethernet/intel/igc/igc.h         |  1 +
  drivers/net/ethernet/intel/igc/igc_ethtool.c | 27 ++++++++++++--------
  drivers/net/ethernet/intel/igc/igc_main.c    | 14 ++++------
  3 files changed, 22 insertions(+), 20 deletions(-)
#11 lore raw

PATCH 5/5 igc: Export LEDs

In reply to Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Each i225 has three LEDs. Export them via the LED class framework.

---
 drivers/net/ethernet/intel/Kconfig           |   1 +
 drivers/net/ethernet/intel/igc/igc.h         |  10 ++
 drivers/net/ethernet/intel/igc/igc_defines.h |  10 ++
 drivers/net/ethernet/intel/igc/igc_main.c    | 132 +++++++++++++++++++
 drivers/net/ethernet/intel/igc/igc_regs.h    |   2 +
 5 files changed, 155 insertions(+)
drivers/net/ethernet/intel/Kconfig +1 -0
index 82744a7501c7..3639cf79cfae 100644
@@ -335,6 +335,7 @@ config IGC
 	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
 	default n
 	depends on PCI
+	depends on LEDS_CLASS
 	help
 	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
 	  family of adapters.
drivers/net/ethernet/intel/igc/igc.h +10 -0
index 5710e5420b40..17b31072b291 100644
@@ -13,6 +13,7 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/timecounter.h>
 #include <linux/net_tstamp.h>
+#include <linux/leds.h>
 
 #include "igc_hw.h"
 
@@ -239,8 +240,17 @@ struct igc_adapter {
 		struct timespec64 start;
 		struct timespec64 period;
 	} perout[IGC_N_PEROUT];
+
+	/* LEDs */
+	struct mutex led_mutex;
+	struct led_classdev led0;
+	struct led_classdev led1;
+	struct led_classdev led2;
 };
 
+#define led_to_igc(ldev, led)                          \
+	container_of(ldev, struct igc_adapter, led)
+
 void igc_up(struct igc_adapter *adapter);
 void igc_down(struct igc_adapter *adapter);
 int igc_open(struct net_device *netdev);
drivers/net/ethernet/intel/igc/igc_defines.h +10 -0
index 7bdd0b1abf20..deb4819f1e27 100644
@@ -144,6 +144,16 @@
 #define IGC_CTRL_SDP0_DIR	0x00400000  /* SDP0 Data direction */
 #define IGC_CTRL_SDP1_DIR	0x00800000  /* SDP1 Data direction */
 
+/* LED Control */
+#define IGC_LEDCTL_LED0_MODE_SHIFT	0
+#define IGC_LEDCTL_LED0_MODE_MASK	GENMASK(3, 0)
+#define IGC_LEDCTL_LED1_MODE_SHIFT	8
+#define IGC_LEDCTL_LED1_MODE_MASK	GENMASK(11, 8)
+#define IGC_LEDCTL_LED2_MODE_SHIFT	16
+#define IGC_LEDCTL_LED2_MODE_MASK	GENMASK(19, 16)
+
+#define IGC_CONNSW_AUTOSENSE_EN		0x1
+
 /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */
 #define MAX_JUMBO_FRAME_SIZE	0x2600
 
drivers/net/ethernet/intel/igc/igc_main.c +132 -0

150 lines not on this page · raw message

drivers/net/ethernet/intel/igc/igc_regs.h +2 -0
index 828c3501c448..f6247b00c4e3 100644
@@ -10,6 +10,8 @@
 #define IGC_EECD		0x00010  /* EEPROM/Flash Control - RW */
 #define IGC_CTRL_EXT		0x00018  /* Extended Device Control - RW */
 #define IGC_MDIC		0x00020  /* MDI Control - RW */
+#define IGC_LEDCTL		0x00E00	 /* LED Control - RW */
+#define IGC_MDICNFG		0x00E04  /* MDC/MDIO Configuration - RW */
 #define IGC_CONNSW		0x00034  /* Copper/Fiber switch control - RW */
 #define IGC_VET			0x00038  /* VLAN Ether Type - RW */
 #define IGC_I225_PHPM		0x00E14  /* I225 PHY Power Management */
Signature · 1 line
2.32.0
#12 lore raw

PATCH 5/5 igc: Export LEDs

Dear Vinicius, dear Kurt,

Am 11.06.21 um 02:39 schrieb Vinicius Costa Gomes:

Quoted 3 lines

From: Kurt Kanzenbach <[email protected]>

Each i225 has three LEDs. Export them via the LED class framework.

Very nice. For those not familiar with the LED class framework, could you add one example how to control one of the LEDs?

Also it?d be nice to document, how this was tested.

Kind regards,

Paul

Quoted 244 lines
---
  drivers/net/ethernet/intel/Kconfig           |   1 +
  drivers/net/ethernet/intel/igc/igc.h         |  10 ++
  drivers/net/ethernet/intel/igc/igc_defines.h |  10 ++
  drivers/net/ethernet/intel/igc/igc_main.c    | 132 +++++++++++++++++++
  drivers/net/ethernet/intel/igc/igc_regs.h    |   2 +
  5 files changed, 155 insertions(+)
drivers/net/ethernet/intel/Kconfig +1 -0
index 82744a7501c7..3639cf79cfae 100644
@@ -335,6 +335,7 @@ config IGC
  	tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
  	default n
  	depends on PCI
+	depends on LEDS_CLASS
  	help
  	  This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
  	  family of adapters.
drivers/net/ethernet/intel/igc/igc.h +10 -0
index 5710e5420b40..17b31072b291 100644
@@ -13,6 +13,7 @@
  #include <linux/ptp_clock_kernel.h>
  #include <linux/timecounter.h>
  #include <linux/net_tstamp.h>
+#include <linux/leds.h>
 
  #include "igc_hw.h"
 
@@ -239,8 +240,17 @@ struct igc_adapter {
  		struct timespec64 start;
  		struct timespec64 period;
  	} perout[IGC_N_PEROUT];
+
+	/* LEDs */
+	struct mutex led_mutex;
+	struct led_classdev led0;
+	struct led_classdev led1;
+	struct led_classdev led2;
  };
 
+#define led_to_igc(ldev, led)                          \
+	container_of(ldev, struct igc_adapter, led)
+
  void igc_up(struct igc_adapter *adapter);
  void igc_down(struct igc_adapter *adapter);
  int igc_open(struct net_device *netdev);
drivers/net/ethernet/intel/igc/igc_defines.h +10 -0
index 7bdd0b1abf20..deb4819f1e27 100644
@@ -144,6 +144,16 @@
  #define IGC_CTRL_SDP0_DIR	0x00400000  /* SDP0 Data direction */
  #define IGC_CTRL_SDP1_DIR	0x00800000  /* SDP1 Data direction */
 
+/* LED Control */
+#define IGC_LEDCTL_LED0_MODE_SHIFT	0
+#define IGC_LEDCTL_LED0_MODE_MASK	GENMASK(3, 0)
+#define IGC_LEDCTL_LED1_MODE_SHIFT	8
+#define IGC_LEDCTL_LED1_MODE_MASK	GENMASK(11, 8)
+#define IGC_LEDCTL_LED2_MODE_SHIFT	16
+#define IGC_LEDCTL_LED2_MODE_MASK	GENMASK(19, 16)
+
+#define IGC_CONNSW_AUTOSENSE_EN		0x1
+
  /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */
  #define MAX_JUMBO_FRAME_SIZE	0x2600
 
drivers/net/ethernet/intel/igc/igc_main.c +132 -0
index ac558a6defe7..e58f07bbf127 100644
@@ -6138,6 +6138,134 @@ int igc_set_spd_dplx(struct igc_adapter *adapter, u32 spd, u8 dplx)
  	return -EINVAL;
  }
 
+static void igc_select_led(struct igc_adapter *adapter, int led,
+			   u32 *mask, u32 *shift)
+{
+	switch (led) {
+	case 0:
+		*mask  = IGC_LEDCTL_LED0_MODE_MASK;
+		*shift = IGC_LEDCTL_LED0_MODE_SHIFT;
+		break;
+	case 1:
+		*mask  = IGC_LEDCTL_LED1_MODE_MASK;
+		*shift = IGC_LEDCTL_LED1_MODE_SHIFT;
+		break;
+	case 2:
+		*mask  = IGC_LEDCTL_LED2_MODE_MASK;
+		*shift = IGC_LEDCTL_LED2_MODE_SHIFT;
+		break;
+	default:
+		*mask = *shift = 0;
+		dev_err(&adapter->pdev->dev, "Unknown led %d selected!", led);
+	}
+}
+
+static void igc_led_set(struct igc_adapter *adapter, int led, u16 brightness)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 shift, mask, ledctl;
+
+	igc_select_led(adapter, led, &mask, &shift);
+
+	mutex_lock(&adapter->led_mutex);
+	ledctl = rd32(IGC_LEDCTL);
+	ledctl &= ~mask;
+	ledctl |= brightness << shift;
+	wr32(IGC_LEDCTL, ledctl);
+	mutex_unlock(&adapter->led_mutex);
+}
+
+static enum led_brightness igc_led_get(struct igc_adapter *adapter, int led)
+{
+	struct igc_hw *hw = &adapter->hw;
+	u32 shift, mask, ledctl;
+
+	igc_select_led(adapter, led, &mask, &shift);
+
+	mutex_lock(&adapter->led_mutex);
+	ledctl = rd32(IGC_LEDCTL);
+	mutex_unlock(&adapter->led_mutex);
+
+	return (ledctl & mask) >> shift;
+}
+
+static void igc_led0_set(struct led_classdev *ldev, enum led_brightness b)
+{
+	struct igc_adapter *adapter = led_to_igc(ldev, led0);
+
+	igc_led_set(adapter, 0, b);
+}
+
+static enum led_brightness igc_led0_get(struct led_classdev *ldev)
+{
+	struct igc_adapter *adapter = led_to_igc(ldev, led0);
+
+	return igc_led_get(adapter, 0);
+}
+
+static void igc_led1_set(struct led_classdev *ldev, enum led_brightness b)
+{
+	struct igc_adapter *adapter = led_to_igc(ldev, led1);
+
+	igc_led_set(adapter, 1, b);
+}
+
+static enum led_brightness igc_led1_get(struct led_classdev *ldev)
+{
+	struct igc_adapter *adapter = led_to_igc(ldev, led1);
+
+	return igc_led_get(adapter, 1);
+}
+
+static void igc_led2_set(struct led_classdev *ldev, enum led_brightness b)
+{
+	struct igc_adapter *adapter = led_to_igc(ldev, led2);
+
+	igc_led_set(adapter, 2, b);
+}
+
+static enum led_brightness igc_led2_get(struct led_classdev *ldev)
+{
+	struct igc_adapter *adapter = led_to_igc(ldev, led2);
+
+	return igc_led_get(adapter, 2);
+}
+
+static int igc_led_setup(struct igc_adapter *adapter)
+{
+	/* Setup */
+	mutex_init(&adapter->led_mutex);
+
+	adapter->led0.name	     = "igc_led0";
+	adapter->led0.max_brightness = 15;
+	adapter->led0.brightness_set = igc_led0_set;
+	adapter->led0.brightness_get = igc_led0_get;
+
+	adapter->led1.name	     = "igc_led1";
+	adapter->led1.max_brightness = 15;
+	adapter->led1.brightness_set = igc_led1_set;
+	adapter->led1.brightness_get = igc_led1_get;
+
+	adapter->led2.name	     = "igc_led2";
+	adapter->led2.max_brightness = 15;
+	adapter->led2.brightness_set = igc_led2_set;
+	adapter->led2.brightness_get = igc_led2_get;
+
+	/* Register leds */
+	led_classdev_register(&adapter->pdev->dev, &adapter->led0);
+	led_classdev_register(&adapter->pdev->dev, &adapter->led1);
+	led_classdev_register(&adapter->pdev->dev, &adapter->led2);
+
+	return 0;
+}
+
+static void igc_led_destroy(struct igc_adapter *adapter)
+{
+	led_classdev_unregister(&adapter->led0);
+	led_classdev_unregister(&adapter->led1);
+	led_classdev_unregister(&adapter->led2);
+}
+
  /**
   * igc_probe - Device Initialization Routine
   * @pdev: PCI device information struct
@@ -6366,6 +6494,8 @@ static int igc_probe(struct pci_dev *pdev,
 
  	pm_runtime_put_noidle(&pdev->dev);
 
+	igc_led_setup(adapter);
+
  	return 0;
 
  err_register:
@@ -6406,6 +6536,8 @@ static void igc_remove(struct pci_dev *pdev)
 
  	igc_ptp_stop(adapter);
 
+	igc_led_destroy(adapter);
+
  	set_bit(__IGC_DOWN, &adapter->state);
 
  	del_timer_sync(&adapter->watchdog_timer);
drivers/net/ethernet/intel/igc/igc_regs.h +2 -0
index 828c3501c448..f6247b00c4e3 100644
@@ -10,6 +10,8 @@
  #define IGC_EECD		0x00010  /* EEPROM/Flash Control - RW */
  #define IGC_CTRL_EXT		0x00018  /* Extended Device Control - RW */
  #define IGC_MDIC		0x00020  /* MDI Control - RW */
+#define IGC_LEDCTL		0x00E00	 /* LED Control - RW */
+#define IGC_MDICNFG		0x00E04  /* MDC/MDIO Configuration - RW */
  #define IGC_CONNSW		0x00034  /* Copper/Fiber switch control - RW */
  #define IGC_VET			0x00038  /* VLAN Ether Type - RW */
  #define IGC_I225_PHPM		0x00E14  /* I225 PHY Power Management */
#13 lore raw

PATCH 5/5 igc: Export LEDs

Quoted 4 lines · Paul Menzel

Dear Vinicius, dear Kurt,

Am 11.06.21 um 02:39 schrieb Vinicius Costa Gomes:

Quoted 8 lines
Quoted 3 lines

From: Kurt Kanzenbach <[email protected]>

Each i225 has three LEDs. Export them via the LED class framework.

Very nice. For those not familiar with the LED class framework, could you add one example how to control one of the LEDs?

Also it?d be nice to document, how this was tested.

Each LED is controllable via sysfs. Example:

 $ cd /sys/class/leds/igc_led0
 $ cat brightness      # Current Mode
 $ cat max_brightness  # 15
 $ echo 0 > brightness # Mode 0
 $ echo 1 > brightness # Mode 1

The brightness field here reflects the different LED modes ranging from 0 to 15.

Thanks,
Kurt
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 861 bytes
Desc: not available
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20210611/62502b6e/attachment.asc>

#14 lore raw

PATCH 5/5 igc: Export LEDs

In reply to Vinicius Costa Gomes
Quoted 6 lines · Vinicius Costa Gomes

From: Kurt Kanzenbach <[email protected]>

Each i225 has three LEDs. Export them via the LED class framework.

Quoted 8 lines
---
  drivers/net/ethernet/intel/Kconfig           |   1 +
  drivers/net/ethernet/intel/igc/igc.h         |  10 ++
  drivers/net/ethernet/intel/igc/igc_defines.h |  10 ++
  drivers/net/ethernet/intel/igc/igc_main.c    | 132 +++++++++++++++++++
  drivers/net/ethernet/intel/igc/igc_regs.h    |   2 +
  5 files changed, 155 insertions(+)