Skip to contentSkip to conversation

ARM: dts: am335x-bone: switch to new cpsw switch drv

PATCH New Grygorii Strashko 1 participant 1 message Jun 12, 2021 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: am335x-bone: switch to new cpsw switch drv

The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port - it's safe to switch drivers.

So, Switch BeagleBone boards to use new cpsw switch driver. Those boards have or 2 Ext. port wired and configured in dual_mac mode by default, or only 1 Ext. port.

---
 arch/arm/boot/dts/am335x-bone-common.dtsi     | 13 +++++---
 .../boot/dts/am335x-boneblack-wireless.dts    |  2 +-
 .../boot/dts/am335x-bonegreen-wireless.dts    |  2 +-
 arch/arm/boot/dts/am335x-sancloud-bbe.dts     | 33 ++-----------------
 4 files changed, 12 insertions(+), 38 deletions(-)
arch/arm/boot/dts/am335x-bone-common.dtsi +8 -5
index 2d51d4bba6d4..37e1539f0211 100644
@@ -353,24 +353,27 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
-	slaves = <1>;
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
arch/arm/boot/dts/am335x-boneblack-wireless.dts +1 -1
index 80116646a3fe..5a4d5d4ab7b8 100644
@@ -62,7 +62,7 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
arch/arm/boot/dts/am335x-bonegreen-wireless.dts +1 -1
index 74db0fc39397..215f279e476b 100644
@@ -62,7 +62,7 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
arch/arm/boot/dts/am335x-sancloud-bbe.dts +2 -31
index 275ba339adf4..86dcd1144db4 100644
@@ -53,22 +53,6 @@
 		>;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
 	usb_hub_ctrl: usb_hub_ctrl {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
@@ -88,25 +72,12 @@
 	};
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
+&mac_sw {
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-id";
 };
Signature · 1 line
2.17.1