Skip to contentSkip to conversation

fix missing error code on path err_unsupported

PATCH In review Yang Yingliang 2 participants 4 messages May 22, 2021 – Jun 12, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover fix missing error code on path err_unsupported

Yang Yingliang (2):
ath10k: go to path err_unsupported when chip id is not supported
ath10k: add missing error return code in ath10k_pci_probe()

 drivers/net/wireless/ath/ath10k/pci.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/2 ath10k: go to path err_unsupported when chip id is not supported

When chip id is not supported, it go to path err_unsupported to print the error message.

Fixes f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/pci.c +1 -1
index e7fde635e0ee..463cf3f8f8a5 100644
@@ -3701,7 +3701,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_unsupported;
 
 	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
-		goto err_free_irq;
+		goto err_unsupported;
 
 	ret = ath10k_core_register(ar, &bus_params);
 	if (ret) {
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH -next 1/2] ath10k: go to path err_unsupported when chip id is not supported

Quoted 6 lines · Yang Yingliang

When chip id is not supported, it go to path err_unsupported to print the error message.

Fixes f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")

2 patches applied to ath-next branch of ath.git, thanks.

9e88dd431d23 ath10k: go to path err_unsupported when chip id is not supported e2783e2f39ba ath10k: add missing error return code in ath10k_pci_probe()

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#3 lore raw

PATCH 2/2 ath10k: add missing error return code in ath10k_pci_probe()

In reply to Yang Yingliang

When chip_id is not supported, the resources will be freed on path err_unsupported, these resources will also be freed when calling ath10k_pci_remove(), it will cause double free, so return -ENODEV when it doesn't support the device with wrong chip_id.

Fixes c0c378f9907c ("ath10k: remove target soc ps code")
Fixes 7505f7c3ec1d ("ath10k: create a chip revision whitelist")
Fixes f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
---
 drivers/net/wireless/ath/ath10k/pci.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/net/wireless/ath/ath10k/pci.c +9 -3
index 463cf3f8f8a5..71878ab35b93 100644
@@ -3685,8 +3685,10 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 			ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
 		if (bus_params.chip_id != 0xffffffff) {
 			if (!ath10k_pci_chip_is_supported(pdev->device,
-							  bus_params.chip_id))
+							  bus_params.chip_id)) {
+				ret = -ENODEV;
 				goto err_unsupported;
+			}
 		}
 	}
 
@@ -3697,11 +3699,15 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	}
 
 	bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
-	if (bus_params.chip_id == 0xffffffff)
+	if (bus_params.chip_id == 0xffffffff) {
+		ret = -ENODEV;
 		goto err_unsupported;
+	}
 
-	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
+	if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
+		ret = -ENODEV;
 		goto err_unsupported;
+	}
 
 	ret = ath10k_core_register(ar, &bus_params);
 	if (ret) {
Signature · 1 line
2.25.1