arm: snapdragon: Use correct GICC register on APQ8016
Subsystems (2)
PATCH 1/1 arm: snapdragon: Use correct GICC register on APQ8016
The GICC register used by u-boot is 0x0a20c000, which is actually a GICC for WCNSS, the WLAN processor. U-boot runs on the Application Processor, therefore it should use APCS GICC instead. Hence, correct it with APCS GICC register address.
Signed-off-by Sheep Sun <[email protected]>
---
arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h +1 -1
@@ -8,7 +8,7 @@#define _MACH_SYSMAP_APQ8016_H#define GICD_BASE (0x0b000000) -#define GICC_BASE (0x0a20c000) +#define GICC_BASE (0x0b002000)/* Clocks: (from CLK_CTL_BASE) */ #define GPLL0_STATUS (0x2101C)
Signature · 1 line
2.30.2
Quoted 26 lines · Sheep Sun
The GICC register used by u-boot is
0x0a20c000, which is actually a GICC for WCNSS, the WLAN processor. U-boot runs on the Application Processor, therefore it should use APCS GICC instead. Hence, correct it with APCS GICC register address.Signed-off-by Sheep Sun <[email protected]>---
arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h +1
-2@@ -8,7 +8,7 @@#define _MACH_SYSMAP_APQ8016_H#define GICD_BASE (0x0b000000) -#define GICC_BASE (0x0a20c000) +#define GICC_BASE (0x0b002000)/* Clocks: (from CLK_CTL_BASE) */ #define GPLL0_STATUS (0x2101C) --
Quoted 2 lines
2.30.2
Reviewed-by Ramon Fried <[email protected]>