rsi: Assign beacon rate settings to the correct rate_info descriptor field
Subsystems (4)
PATCH 1/1 rsi: Assign beacon rate settings to the correct rate_info descriptor field
The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info field. The rest of the driver does it correctly, except this one place, so fix it. This is also aligned with the RSI downstream vendor driver. Without this patch, an AP operating at 5 GHz does not transmit any beacons at all, this patch fixes that.
--- drivers/net/wireless/rsi/rsi_91x_hal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/rsi/rsi_91x_hal.c +2 -2
@@ -470,9 +470,9 @@ int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb) }if (common->band ==NL80211_BAND_2GHZ ) - bcn_frm->bbp_info |=cpu_to_le16 (RSI_RATE_1 ); + bcn_frm->rate_info |=cpu_to_le16 (RSI_RATE_1 );else - bcn_frm->bbp_info |=cpu_to_le16 (RSI_RATE_6 ); + bcn_frm->rate_info |=cpu_to_le16 (RSI_RATE_6 );if (mac_bcn->data[tim_offset +2 ] ==0 ) bcn_frm->frame_info |=cpu_to_le16 (RSI_DATA_DESC_DTIM_BEACON );
Signature · 1 line
2.30.2
Quoted 6 lines · Marek Vasut
The
RSI_RATE_xbits must be assigned to structrsi_data_descrate_infofield. The rest of the driver does it correctly, except this one place, so fix it. This is also aligned with the RSI downstream vendor driver. Without this patch, an AP operating at 5 GHz does not transmit any beacons at all, this patch fixes that.
Quoted 14 lines
Fixes d26a9559403c ("rsi: add beacon changes for AP mode")Signed-off-by Marek Vasut <[email protected]>Cc Amitkumar Karwar <[email protected]>Cc Angus Ainslie <[email protected]>Cc David S. Miller <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Kalle Valo <[email protected]>Cc Karun Eagalapati <[email protected]>Cc Martin Kepplinger <[email protected]>Cc Prameela Rani Garnepudi <[email protected]>Cc Sebastian Krzyszkowiak <[email protected]>Cc Siva Rebbagondla <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
b1c3a24897bd rsi: Assign beacon rate settings to the correct rate_info descriptor field
Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches