dt-bindings: Drop redundant minItems/maxItems
Subsystems (86)
Rob Herring
maintainerPATCH 1/1 dt-bindings: Drop redundant minItems/maxItems
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
--- .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 1 - .../devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 1 - Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-sm8350.yaml | 2 -- .../devicetree/bindings/clock/sprd,sc9863a-clk.yaml | 1 - .../devicetree/bindings/crypto/allwinner,sun8i-ce.yaml | 2 -- Documentation/devicetree/bindings/crypto/fsl-dcp.yaml | 1 - .../display/allwinner,sun4i-a10-display-backend.yaml | 6 ------ .../bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml | 1 - .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 4 ---- .../bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml | 2 -- .../bindings/display/allwinner,sun8i-r40-tcon-top.yaml | 2 -- .../devicetree/bindings/display/bridge/cdns,mhdp8546.yaml | 2 -- .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 2 -- Documentation/devicetree/bindings/display/st,stm32-dsi.yaml | 2 -- .../devicetree/bindings/display/st,stm32-ltdc.yaml | 1 - .../devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml | 4 ---- .../devicetree/bindings/dma/renesas,rcar-dmac.yaml | 1 - .../devicetree/bindings/edac/amazon,al-mc-edac.yaml | 2 -- Documentation/devicetree/bindings/eeprom/at24.yaml | 1 - Documentation/devicetree/bindings/example-schema.yaml | 2 -- Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 - Documentation/devicetree/bindings/gpu/vivante,gc.yaml | 1 - Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 1 - .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 2 -- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml | 1 - .../devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml | 1 - .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 -- .../bindings/interrupt-controller/fsl,irqsteer.yaml | 1 - .../bindings/interrupt-controller/loongson,liointc.yaml | 1 - Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml | 1 - .../devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml | 1 - .../devicetree/bindings/mailbox/st,stm32-ipcc.yaml | 2 -- .../devicetree/bindings/media/amlogic,gx-vdec.yaml | 1 - Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 1 - .../devicetree/bindings/media/marvell,mmp2-ccic.yaml | 1 - .../devicetree/bindings/media/qcom,sc7180-venus.yaml | 1 - .../devicetree/bindings/media/qcom,sdm845-venus-v2.yaml | 1 - .../devicetree/bindings/media/qcom,sm8250-venus.yaml | 1 - Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 - .../bindings/memory-controllers/mediatek,smi-common.yaml | 6 ++---- .../bindings/memory-controllers/mediatek,smi-larb.yaml | 1 - .../devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 2 -- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 - Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 2 -- Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml | 2 -- Documentation/devicetree/bindings/mmc/sdhci-am654.yaml | 1 - Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml | 1 - .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 -- .../devicetree/bindings/net/brcm,bcm4908-enet.yaml | 2 -- Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 2 -- Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml | 2 -- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 -- Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 1 - Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 2 -- Documentation/devicetree/bindings/pci/loongson.yaml | 1 - .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 1 - .../devicetree/bindings/pci/microchip,pcie-host.yaml | 2 -- Documentation/devicetree/bindings/perf/arm,cmn.yaml | 1 - .../devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 1 - .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml | 3 --- Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml | 1 - Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-sierra.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-torrent.yaml | 4 ---- .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 1 - .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 - .../devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml | 1 - .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 1 - .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 1 - .../devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 2 -- .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 1 - .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 1 - Documentation/devicetree/bindings/reset/fsl,imx-src.yaml | 1 - .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 1 - .../devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 1 - Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml | 1 - Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 2 -- Documentation/devicetree/bindings/serial/samsung_uart.yaml | 1 - .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 1 - Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml | 2 -- .../bindings/sound/nvidia,tegra-audio-graph-card.yaml | 1 - .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 2 -- Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 3 --- .../devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml | 1 - .../devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml | 2 -- .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 2 -- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 - .../bindings/timer/allwinner,sun5i-a13-hstimer.yaml | 1 - Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 1 - .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 -- .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 1 - .../devicetree/bindings/usb/maxim,max3420-udc.yaml | 2 -- .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 4 ---- Documentation/devicetree/bindings/usb/renesas,usbhs.yaml | 3 --- .../devicetree/bindings/watchdog/st,stm32-iwdg.yaml | 1 - 101 files changed, 2 insertions(+), 163 deletions(-)
Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml +0 -1
@@ -20,7 +20,6 @@ properties: reg: minItems: 2 - maxItems: 3 items: - description: AHCI registers - description: SATA configuration and IPFS registers
Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +0 -2
@@ -51,7 +51,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: High Frequency Oscillator (usually at 24MHz) - description: Low Frequency Oscillator (usually at 32kHz)
@@ -60,7 +59,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: hosc - const: losc
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +0 -1
@@ -46,7 +46,6 @@ properties: nvmem-cell-names: minItems: 1 - maxItems: 2 items: - const: calib - const: calib_backup
Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml +0 -2
@@ -27,7 +27,6 @@ properties: - description: Sleep clock source - description: PLL test clock source (Optional clock) minItems: 2 - maxItems: 3 clock-names: items:
@@ -35,7 +34,6 @@ properties: - const: sleep_clk - const: core_bi_pll_test_se # Optional clock minItems: 2 - maxItems: 3 '#clock-cells': const: 1
Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml +0 -2
@@ -36,7 +36,6 @@ properties: - description: USB3 phy wrapper pipe clock source (Optional clock) - description: USB3 phy sec pipe clock source (Optional clock) minItems: 2 - maxItems: 13 clock-names: items:
@@ -54,7 +53,6 @@ properties: - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock minItems: 2 - maxItems: 13 '#clock-cells': const: 1
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +0 -1
@@ -40,7 +40,6 @@ properties: clock-names: minItems: 1 - maxItems: 4 items: - const: ext-26m - const: ext-32k
Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +0 -2
@@ -30,7 +30,6 @@ properties: - description: Module clock - description: MBus clock minItems: 2 - maxItems: 3 clock-names: items:
@@ -38,7 +37,6 @@ properties: - const: mod - const: ram minItems: 2 - maxItems: 3 resets: maxItems: 1
Documentation/devicetree/bindings/crypto/fsl-dcp.yaml +0 -1
@@ -27,7 +27,6 @@ properties: - description: MXS DCP DCP interrupt - description: MXS DCP secure interrupt minItems: 2 - maxItems: 3 clocks: maxItems: 1
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml +0 -6
@@ -26,14 +26,12 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Display Backend registers - description: SAT registers reg-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat
@@ -43,7 +41,6 @@ properties: clocks: minItems: 3 - maxItems: 4 items: - description: The backend interface clock - description: The backend module clock
@@ -52,7 +49,6 @@ properties: clock-names: minItems: 3 - maxItems: 4 items: - const: ahb - const: mod
@@ -61,14 +57,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: The Backend reset line - description: The SAT reset line reset-names: minItems: 1 - maxItems: 2 items: - const: be - const: sat
Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +0 -1
@@ -24,7 +24,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Bus Clock - description: Module Clock
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +0 -4
@@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 6 items: - description: Bus Clock - description: Register Clock
@@ -57,7 +56,6 @@ properties: clock-names: minItems: 3 - maxItems: 6 items: - const: iahb - const: isfr
@@ -68,14 +66,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: HDMI Controller Reset - description: HDCP Reset reset-names: minItems: 1 - maxItems: 2 items: - const: ctrl - const: hdcp
Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml +0 -2
@@ -27,7 +27,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: Bus Clock - description: Module Clock
@@ -36,7 +35,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: bus - const: mod
Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml +0 -2
@@ -48,7 +48,6 @@ properties: clocks: minItems: 2 - maxItems: 6 items: - description: The TCON TOP interface clock - description: The TCON TOP TV0 clock
@@ -59,7 +58,6 @@ properties: clock-names: minItems: 2 - maxItems: 6 items: - const: bus - const: tcon-tv0
Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml +0 -2
@@ -18,7 +18,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
@@ -29,7 +28,6 @@ properties: reg-names: minItems: 1 - maxItems: 2 items: - const: mhdptx - const: j721e-intg
Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +0 -2
@@ -29,7 +29,6 @@ properties: clocks: minItems: 2 - maxItems: 5 items: - {} - {}
@@ -41,7 +40,6 @@ properties: clock-names: minItems: 2 - maxItems: 5 items: - {} - {}
Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +0 -2
@@ -29,7 +29,6 @@ properties: - description: DSI bus clock - description: Pixel clock minItems: 2 - maxItems: 3 clock-names: items:
@@ -37,7 +36,6 @@ properties: - const: ref - const: px_clk minItems: 2 - maxItems: 3 resets: maxItems: 1
Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml +0 -1
@@ -22,7 +22,6 @@ properties: - description: events interrupt line. - description: errors interrupt line. minItems: 1 - maxItems: 2 clocks: maxItems: 1
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +0 -4
@@ -65,7 +65,6 @@ properties: The APB clock and at least one video clock are mandatory, the audio clock is optional. minItems: 2 - maxItems: 4 items: - description: dp_apb_clk is the APB clock - description: dp_aud_clk is the Audio clock
@@ -78,13 +77,11 @@ properties: clock-names: oneOf: - minItems: 2 - maxItems: 3 items: - const: dp_apb_clk - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ] - minItems: 3 - maxItems: 4 items: - const: dp_apb_clk - const: dp_aud_clk
@@ -116,7 +113,6 @@ properties: maxItems: 2 phy-names: minItems: 1 - maxItems: 2 items: - const: dp-phy0 - const: dp-phy1
Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +0 -1
@@ -52,7 +52,6 @@ properties: interrupt-names: minItems: 9 - maxItems: 17 items: - const: error - pattern: "^ch([0-9]|1[0-5])$"
Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml +0 -2
@@ -30,14 +30,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: uncorrectable error interrupt - description: correctable error interrupt interrupt-names: minItems: 1 - maxItems: 2 items: - const: ue - const: ce
Documentation/devicetree/bindings/eeprom/at24.yaml +0 -1
@@ -32,7 +32,6 @@ properties: oneOf: - allOf: - minItems: 1 - maxItems: 2 items: - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$" - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
Documentation/devicetree/bindings/example-schema.yaml +0 -2
@@ -91,7 +91,6 @@ properties: interrupts: # Either 1 or 2 interrupts can be present minItems: 1 - maxItems: 2 items: - description: tx or combined interrupt - description: rx interrupt
@@ -105,7 +104,6 @@ properties: interrupt-names: # minItems must be specified here because the default would be 2 minItems: 1 - maxItems: 2 items: - const: tx irq - const: rx irq
Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml +0 -1
@@ -34,7 +34,6 @@ properties: - enum: [ bridge, gca ] - enum: [ bridge, gca ] minItems: 2 - maxItems: 4 interrupts: items:
Documentation/devicetree/bindings/gpu/vivante,gc.yaml +0 -1
@@ -36,7 +36,6 @@ properties: - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) minItems: 1 - maxItems: 4 clock-names: items:
Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml +0 -1
@@ -21,7 +21,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: BSC register range - description: Auto-I2C register range
Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +0 -2
@@ -43,14 +43,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Reference clock for the I2C bus - description: Bus clock (Only for Armada 7K/8K) clock-names: minItems: 1 - maxItems: 2 items: - const: core - const: reg
Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml +0 -1
@@ -20,7 +20,6 @@ properties: reg: minItems: 3 - maxItems: 4 items: - description: Smbus block registers - description: Cause master registers
Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml +0 -1
@@ -41,7 +41,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: clkin - const: core
Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +0 -2
@@ -38,14 +38,12 @@ properties: dfsdm clock can also feed CLKOUT, when CLKOUT is used. - description: audio clock can be used as an alternate to feed CLKOUT. minItems: 1 - maxItems: 2 clock-names: items: - const: dfsdm - const: audio minItems: 1 - maxItems: 2 "#address-cells": const: 1
Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +0 -1
@@ -35,7 +35,6 @@ properties: - description: output interrupt 6 - description: output interrupt 7 minItems: 1 - maxItems: 8 clocks: maxItems: 1
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +0 -1
@@ -50,7 +50,6 @@ properties: - const: int2 - const: int3 minItems: 1 - maxItems: 4 '#interrupt-cells': const: 2
Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml +0 -1
@@ -38,7 +38,6 @@ properties: If provided, then the combined interrupt will be used in preference to any others. - minItems: 2 - maxItems: 4 items: - const: eventq # Event Queue not empty - const: gerror # Global Error activated
Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml +0 -1
@@ -49,7 +49,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 description: Specifiers for the MMU fault interrupts. Not required for cache IPMMUs. items:
Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +0 -2
@@ -32,7 +32,6 @@ properties: - description: tx channel free - description: wakeup source minItems: 2 - maxItems: 3 interrupt-names: items:
@@ -40,7 +39,6 @@ properties: - const: tx - const: wakeup minItems: 2 - maxItems: 3 wakeup-source: true
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +0 -1
@@ -67,7 +67,6 @@ properties: clock-names: minItems: 4 - maxItems: 5 items: - const: dos_parser - const: dos
Documentation/devicetree/bindings/media/i2c/adv7604.yaml +0 -1
@@ -30,7 +30,6 @@ properties: reg-names: minItems: 1 - maxItems: 13 items: - const: main - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml +0 -1
@@ -43,7 +43,6 @@ properties: clocks: minItems: 1 - maxItems: 3 items: - description: AXI bus interface clock - description: Peripheral clock
Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +0 -1
@@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 2 - maxItems: 3 items: - const: venus - const: vcodec0
Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +0 -1
@@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 3 - maxItems: 4 items: - const: venus - const: vcodec0
Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml +0 -1
@@ -30,7 +30,6 @@ properties: power-domain-names: minItems: 2 - maxItems: 3 items: - const: venus - const: vcodec0
Documentation/devicetree/bindings/media/renesas,drif.yaml +0 -1
@@ -78,7 +78,6 @@ properties: dma-names: minItems: 1 - maxItems: 2 items: - const: rx - const: rx
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml +2 -4
@@ -53,14 +53,12 @@ properties: apb and smi are mandatory. the async is only for generation 1 smi HW. gals(global async local sync) also is optional, see below. minItems: 2 - maxItems: 4 items: - description: apb is Advanced Peripheral Bus clock, It's the clock for setting the register. - description: smi is the clock for transfer data and command. - - description: async is asynchronous clock, it help transform the smi - clock into the emi clock domain. - - description: gals0 is the path0 clock of gals. + - description: Either asynchronous clock to help transform the smi clock + into the emi clock domain on Gen1 h/w, or the path0 clock of gals. - description: gals1 is the path1 clock of gals. clock-names:
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +0 -1
@@ -37,7 +37,6 @@ properties: description: | apb and smi are mandatory. gals(global async local sync) is optional. minItems: 2 - maxItems: 3 items: - description: apb is Advanced Peripheral Bus clock, It's the clock for setting the register.
Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +0 -2
@@ -64,7 +64,6 @@ properties: clocks: minItems: 2 - maxItems: 4 items: - description: Bus Clock - description: Module Clock
@@ -73,7 +72,6 @@ properties: clock-names: minItems: 2 - maxItems: 4 items: - const: ahb - const: mmc
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +0 -1
@@ -116,7 +116,6 @@ properties: pinctrl-names: minItems: 1 - maxItems: 4 items: - const: default - const: state_100mhz
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +0 -2
@@ -38,7 +38,6 @@ properties: description: Should contain phandle for the clock feeding the MMC controller. minItems: 2 - maxItems: 8 items: - description: source clock (required). - description: HCLK which used for host (required).
@@ -51,7 +50,6 @@ properties: clock-names: minItems: 2 - maxItems: 8 items: - const: source - const: hclk
Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +0 -2
@@ -75,7 +75,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: core - const: cd
@@ -107,7 +106,6 @@ properties: pinctrl-names: minItems: 1 - maxItems: 2 items: - const: default - const: state_uhs
Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +0 -1
@@ -45,7 +45,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: clk_ahb - const: clk_xin
Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml +0 -1
@@ -57,7 +57,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: io - const: core
Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +0 -2
@@ -43,7 +43,6 @@ allOf: properties: clocks: minItems: 3 - maxItems: 4 items: - description: GMAC main clock - description: First parent clock of the internal mux
@@ -52,7 +51,6 @@ allOf: clock-names: minItems: 3 - maxItems: 4 items: - const: stmmaceth - const: clkin0
Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml +0 -2
@@ -23,14 +23,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: RX interrupt - description: TX interrupt interrupt-names: minItems: 1 - maxItems: 2 items: - const: rx - const: tx
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +0 -2
@@ -30,14 +30,12 @@ properties: - description: interrupt line0 - description: interrupt line1 minItems: 1 - maxItems: 2 interrupt-names: items: - const: int0 - const: int1 minItems: 1 - maxItems: 2 clocks: items:
Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml +0 -2
@@ -48,14 +48,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: switch's main clock - description: dividing of the switch core clock clock-names: minItems: 1 - maxItems: 2 items: - const: sw_switch - const: sw_switch_mdiv
Documentation/devicetree/bindings/net/snps,dwmac.yaml +0 -2
@@ -82,7 +82,6 @@ properties: interrupts: minItems: 1 - maxItems: 3 items: - description: Combined signal for various interrupt events - description: The interrupt to manage the remote wake-up packet detection
@@ -90,7 +89,6 @@ properties: interrupt-names: minItems: 1 - maxItems: 3 items: - const: macirq - const: eth_wake_irq
Documentation/devicetree/bindings/net/stm32-dwmac.yaml +0 -1
@@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 5 items: - description: GMAC main clock - description: MAC TX clock
Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +0 -2
@@ -25,14 +25,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 - maxItems: 2 items: - const: pcie - const: msi
Documentation/devicetree/bindings/pci/loongson.yaml +0 -1
@@ -24,7 +24,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: CFG0 standard config space register - description: CFG1 extended config space register
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +0 -1
@@ -70,7 +70,6 @@ properties: reset-names: minItems: 1 - maxItems: 2 items: - const: phy - const: mac
Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +0 -2
@@ -26,14 +26,12 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: PCIe host controller - description: builtin MSI controller interrupt-names: minItems: 1 - maxItems: 2 items: - const: pcie - const: msi
Documentation/devicetree/bindings/perf/arm,cmn.yaml +0 -1
@@ -21,7 +21,6 @@ properties: interrupts: minItems: 1 - maxItems: 4 items: - description: Overflow interrupt for DTC0 - description: Overflow interrupt for DTC1
Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml +0 -1
@@ -28,7 +28,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: usbh - const: usb_ref
Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +0 -3
@@ -22,7 +22,6 @@ properties: reg: minItems: 1 - maxItems: 6 items: - description: the base CTRL register - description: XHCI EC register
@@ -33,7 +32,6 @@ properties: reg-names: minItems: 1 - maxItems: 6 items: - const: ctrl - const: xhci_ec
@@ -51,7 +49,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: sw_usb - const: sw_usb3
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +0 -1
@@ -35,7 +35,6 @@ properties: reg-names: minItems: 1 - maxItems: 2 items: - const: phy - const: phy-ctrl
Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +0 -2
@@ -131,7 +131,6 @@ patternProperties: clocks: minItems: 1 - maxItems: 2 items: - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) - description: Reference clock of analog phy
@@ -141,7 +140,6 @@ patternProperties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: da_ref
Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml +0 -2
@@ -31,14 +31,12 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: Sierra PHY reset. - description: Sierra APB reset. This is optional. reset-names: minItems: 1 - maxItems: 2 items: - const: sierra_reset - const: sierra_apb
Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +0 -4
@@ -52,28 +52,24 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Offset of the Torrent PHY configuration registers. - description: Offset of the DPTX PHY configuration registers. reg-names: minItems: 1 - maxItems: 2 items: - const: torrent_phy - const: dptx_phy resets: minItems: 1 - maxItems: 2 items: - description: Torrent PHY reset. - description: Torrent APB reset. This is optional. reset-names: minItems: 1 - maxItems: 2 items: - const: torrent_reset - const: torrent_apb
Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml +0 -1
@@ -30,7 +30,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: xo
Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml +0 -1
@@ -30,7 +30,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: ref - const: xo
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +0 -1
@@ -49,7 +49,6 @@ properties: reg: minItems: 1 - maxItems: 2 items: - description: Address and length of PHY's common serdes block. - description: Address and length of PHY's DP_COM control block.
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +0 -2
@@ -36,7 +36,6 @@ properties: clocks: minItems: 2 - maxItems: 3 items: - description: phy config clock - description: 19.2 MHz ref clk
@@ -44,7 +43,6 @@ properties: clock-names: minItems: 2 - maxItems: 3 items: - const: cfg_ahb - const: ref
Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +0 -2
@@ -39,7 +39,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: fck - const: usb_x1
@@ -61,7 +60,6 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: reset of USB 2.0 host side - description: reset of USB 2.0 peripheral side
Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml +0 -1
@@ -33,7 +33,6 @@ properties: # If you want to use the ssc, the clock-frequency of usb_extal # must not be 0. minItems: 2 - maxItems: 3 items: - const: usb3-if # The funcional clock - const: usb3s_clk # The usb3's external clock
Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml +0 -1
@@ -26,7 +26,6 @@ properties: - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control - description: PAD Drive Capacity Select minItems: 1 - maxItems: 4 clocks: maxItems: 1
Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +0 -1
@@ -37,7 +37,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: vpu - const: vapb
Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +0 -1
@@ -37,7 +37,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Module Clock - description: Bus Clock
Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +0 -2
@@ -72,7 +72,6 @@ properties: - from local to remote, where ACK from the remote means that communnication as been stopped on the remote side. minItems: 1 - maxItems: 4 mbox-names: items:
@@ -81,7 +80,6 @@ properties: - const: shutdown - const: detach minItems: 1 - maxItems: 4 memory-region: description:
Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +0 -1
@@ -57,7 +57,6 @@ properties: memory-region: minItems: 2 - maxItems: 8 description: | phandle to the reserved memory nodes to be associated with the remoteproc device. There should be at least two reserved memory nodes defined. The
Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +0 -1
@@ -116,7 +116,6 @@ properties: list, in the specified order, each representing the corresponding internal RAM memory region. minItems: 1 - maxItems: 3 items: - const: l2ram - const: l1pram
Documentation/devicetree/bindings/reset/fsl,imx-src.yaml +0 -1
@@ -59,7 +59,6 @@ properties: - description: SRC interrupt - description: CPU WDOG interrupts out of SRC minItems: 1 - maxItems: 2 '#reset-cells': const: 1
Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +0 -1
@@ -56,7 +56,6 @@ properties: interrupts: minItems: 3 - maxItems: 4 items: - description: DirError interrupt - description: DataError interrupt
Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +0 -1
@@ -32,7 +32,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: RTC Alarm 0 - description: RTC Alarm 1
Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml +0 -1
@@ -21,7 +21,6 @@ properties: - description: rtc alarm interrupt - description: dryice security violation interrupt minItems: 1 - maxItems: 2 clocks: maxItems: 1
Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +0 -2
@@ -36,14 +36,12 @@ properties: - description: ipg clock - description: baud clock minItems: 1 - maxItems: 2 clock-names: items: - const: ipg - const: baud minItems: 1 - maxItems: 2 dmas: items:
Documentation/devicetree/bindings/serial/samsung_uart.yaml +0 -1
@@ -44,7 +44,6 @@ properties: clock-names: description: N = 0 is allowed for SoCs without internal baud clock mux. minItems: 2 - maxItems: 5 items: - const: uart - pattern: '^clk_uart_baud[0-3]$'
Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +0 -1
@@ -164,7 +164,6 @@ patternProperties: interrupts: minItems: 1 - maxItems: 2 items: - description: UART core irq - description: Wakeup irq (RX GPIO)
Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +0 -2
@@ -100,7 +100,6 @@ patternProperties: properties: reg: minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. - maxItems: 3 items: - description: Address and size of the Data RAM0. - description: Address and size of the Data RAM1.
@@ -111,7 +110,6 @@ patternProperties: reg-names: minItems: 2 - maxItems: 3 items: - const: dram0 - const: dram1
Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml +0 -1
@@ -28,7 +28,6 @@ properties: minItems: 2 clock-names: - minItems: 2 items: - const: pll_a - const: plla_out0
Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +0 -2
@@ -34,7 +34,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: I2S bit clock - description:
@@ -48,7 +47,6 @@ properties: clock-names: minItems: 1 - maxItems: 2 items: - const: i2s - const: sync_input
Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +0 -3
@@ -26,7 +26,6 @@ properties: - description: Base address and size of SAI common register set. - description: Base address and size of SAI identification register set. minItems: 1 - maxItems: 2 ranges: maxItems: 1
@@ -81,14 +80,12 @@ patternProperties: - description: sai_ck clock feeding the internal clock generator. - description: MCLK clock from a SAI set as master clock provider. minItems: 1 - maxItems: 2 clock-names: items: - const: sai_ck - const: MCLK minItems: 1 - maxItems: 2 dmas: maxItems: 1
Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +0 -1
@@ -35,7 +35,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: controller register bus clock - description: baud rate generator and delay control clock
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +0 -2
@@ -56,7 +56,6 @@ properties: reg-names: minItems: 1 - maxItems: 5 items: - const: mspi - const: bspi
@@ -71,7 +70,6 @@ properties: interrupt-names: oneOf: - minItems: 1 - maxItems: 7 items: - const: mspi_done - const: mspi_halted
Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +0 -2
@@ -23,14 +23,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: Bus Clock - description: Module Clock clock-names: minItems: 1 - maxItems: 2 items: - const: bus - const: mod
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +0 -1
@@ -77,7 +77,6 @@ properties: nvmem-cell-names: minItems: 1 - maxItems: 2 items: - const: calib - enum:
Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml +0 -1
@@ -24,7 +24,6 @@ properties: interrupts: minItems: 2 - maxItems: 4 items: - description: Timer 0 Interrupt - description: Timer 1 Interrupt
Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +0 -1
@@ -35,7 +35,6 @@ properties: interrupts: minItems: 1 - maxItems: 5 items: - description: secure timer irq - description: non-secure timer irq
Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +0 -2
@@ -71,14 +71,12 @@ patternProperties: interrupts: minItems: 1 - maxItems: 2 items: - description: physical timer irq - description: virtual timer irq reg: minItems: 1 - maxItems: 2 items: - description: 1st view base address - description: 2nd optional view base address
Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml +0 -1
@@ -22,7 +22,6 @@ properties: interrupts: minItems: 1 - maxItems: 2 items: - description: Timer 1 interrupt - description: Timer 2 interrupt
Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +0 -2
@@ -30,14 +30,12 @@ properties: - description: usb irq from max3420 - description: vbus detection irq minItems: 1 - maxItems: 2 interrupt-names: items: - const: udc - const: vbus minItems: 1 - maxItems: 2 spi-max-frequency: maximum: 26000000
Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +0 -4
@@ -25,7 +25,6 @@ properties: reg: minItems: 2 - maxItems: 3 items: - description: XUSB device controller registers - description: XUSB device PCI Config registers
@@ -33,7 +32,6 @@ properties: reg-names: minItems: 2 - maxItems: 3 items: - const: base - const: fpci
@@ -45,7 +43,6 @@ properties: clocks: minItems: 4 - maxItems: 5 items: - description: Clock to enable core XUSB dev clock. - description: Clock to enable XUSB super speed clock.
@@ -55,7 +52,6 @@ properties: clock-names: minItems: 4 - maxItems: 5 items: - const: dev - const: ss
Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +0 -3
@@ -53,7 +53,6 @@ properties: clocks: minItems: 1 - maxItems: 3 items: - description: USB 2.0 host - description: USB 2.0 peripheral
@@ -86,7 +85,6 @@ properties: dma-names: minItems: 2 - maxItems: 4 items: - const: ch0 - const: ch1
@@ -100,7 +98,6 @@ properties: resets: minItems: 1 - maxItems: 2 items: - description: USB 2.0 host - description: USB 2.0 peripheral
Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml +0 -1
@@ -27,7 +27,6 @@ properties: - description: Low speed clock - description: Optional peripheral clock minItems: 1 - maxItems: 2 clock-names: items:
Signature · 1 line
2.27.0
Quoted 53 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Cc Jens Axboe <[email protected]>Cc Stephen Boyd <[email protected]>Cc Herbert Xu <[email protected]>Cc "David S. Miller" <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Vinod Koul <[email protected]>Cc Bartosz Golaszewski <[email protected]>Cc Kamal Dasu <[email protected]>Cc Jonathan Cameron <[email protected]>Cc Lars-Peter Clausen <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Marc Zyngier <[email protected]>Cc Joerg Roedel <[email protected]>Cc Jassi Brar <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Ulf Hansson <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Wolfgang Grandegger <[email protected]>Cc Marc Kleine-Budde <[email protected]>Cc Andrew Lunn <[email protected]>Cc Vivien Didelot <[email protected]>Cc Vladimir Oltean <[email protected]>Cc Bjorn Helgaas <[email protected]>Cc Kishon Vijay Abraham I <[email protected]>Cc Linus Walleij <[email protected]>Cc "Uwe Kleine-König" <[email protected]>Cc Lee Jones <[email protected]>Cc Ohad Ben-Cohen <[email protected]>Cc Mathieu Poirier <[email protected]>Cc Philipp Zabel <[email protected]>Cc Paul Walmsley <[email protected]>Cc Palmer Dabbelt <[email protected]>Cc Albert Ou <[email protected]>Cc Alessandro Zummo <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Mark Brown <[email protected]>Cc Zhang Rui <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Wim Van Sebroeck <[email protected]>Cc Guenter Roeck <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 1 line
---
Quoted 11 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
.../devicetree/bindings/dma/renesas,rcar-dmac.yaml | 1 -
Quoted 10 lines
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml | 1 - Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-sierra.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-torrent.yaml | 4 ---- .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 1 - .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 -
Signature · 1 line
~Vinod
Quoted 8 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
[...]
Quoted 1 line
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 2 --
regards,
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Quoted 8 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
[...]
Quoted 1 line
Documentation/devicetree/bindings/reset/fsl,imx-src.yaml | 1 -
[...]
Documentation/devicetree/bindings/reset/fsl,imx-src.yaml properties: · line 64
Quoted 12 lines
Documentation/devicetree/bindings/reset/fsl,imx-src.yaml +0
-1@@ -59,7 +59,6 @@ properties: - description: SRC interrupt - description: CPU WDOG interrupts out of SRC minItems: 1 - maxItems: 2 '#reset-cells': const: 1
regards
Philipp
Quoted 4 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
Quoted 9 lines · On Tue, 15 Jun 2021 13:15:43 -0600 Rob Herring <[email protected]> wrote:
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
...
Quoted 1 line
.../devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml | 1 -
For this one, the fact it overrides maxItems elsewhere makes this a little bit odd. I guess we can get used to it being implicit.
Quoted 1 line
.../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 --
Quoted 45 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Cc Jens Axboe <[email protected]>Cc Stephen Boyd <[email protected]>Cc Herbert Xu <[email protected]>Cc "David S. Miller" <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Vinod Koul <[email protected]>Cc Bartosz Golaszewski <[email protected]>Cc Kamal Dasu <[email protected]>Cc Jonathan Cameron <[email protected]>Cc Lars-Peter Clausen <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Marc Zyngier <[email protected]>Cc Joerg Roedel <[email protected]>Cc Jassi Brar <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Ulf Hansson <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Wolfgang Grandegger <[email protected]>Cc Marc Kleine-Budde <[email protected]>Cc Andrew Lunn <[email protected]>Cc Vivien Didelot <[email protected]>Cc Vladimir Oltean <[email protected]>Cc Bjorn Helgaas <[email protected]>Cc Kishon Vijay Abraham I <[email protected]>Cc Linus Walleij <[email protected]>Cc "Uwe Kleine-König" <[email protected]>Cc Lee Jones <[email protected]>Cc Ohad Ben-Cohen <[email protected]>Cc Mathieu Poirier <[email protected]>Cc Philipp Zabel <[email protected]>Cc Paul Walmsley <[email protected]>Cc Palmer Dabbelt <[email protected]>Cc Albert Ou <[email protected]>Cc Alessandro Zummo <[email protected]>
Quoted 8 lines
Cc Alexandre Belloni <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Mark Brown <[email protected]>Cc Zhang Rui <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Wim Van Sebroeck <[email protected]>Cc Guenter Roeck <[email protected]>Signed-off-by Rob Herring <[email protected]>
Quoted 46 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Cc Jens Axboe <[email protected]>Cc Stephen Boyd <[email protected]>Cc Herbert Xu <[email protected]>Cc "David S. Miller" <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Vinod Koul <[email protected]>Cc Bartosz Golaszewski <[email protected]>Cc Kamal Dasu <[email protected]>Cc Jonathan Cameron <[email protected]>Cc Lars-Peter Clausen <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Marc Zyngier <[email protected]>Cc Joerg Roedel <[email protected]>Cc Jassi Brar <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Ulf Hansson <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Wolfgang Grandegger <[email protected]>Cc Marc Kleine-Budde <[email protected]>Cc Andrew Lunn <[email protected]>Cc Vivien Didelot <[email protected]>Cc Vladimir Oltean <[email protected]>Cc Bjorn Helgaas <[email protected]>Cc Kishon Vijay Abraham I <[email protected]>Cc Linus Walleij <[email protected]>Cc "Uwe Kleine-König" <[email protected]>Cc Lee Jones <[email protected]>Cc Ohad Ben-Cohen <[email protected]>Cc Mathieu Poirier <[email protected]>Cc Philipp Zabel <[email protected]>Cc Paul Walmsley <[email protected]>Cc Palmer Dabbelt <[email protected]>Cc Albert Ou <[email protected]>Cc Alessandro Zummo <[email protected]>
Quoted 8 lines
Cc Alexandre Belloni <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Mark Brown <[email protected]>Cc Zhang Rui <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Wim Van Sebroeck <[email protected]>Cc Guenter Roeck <[email protected]>Signed-off-by Rob Herring <[email protected]>
[...]
Kind regards
Uffe
Quoted 149 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Cc Jens Axboe <[email protected]>Cc Stephen Boyd <[email protected]>Cc Herbert Xu <[email protected]>Cc "David S. Miller" <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Vinod Koul <[email protected]>Cc Bartosz Golaszewski <[email protected]>Cc Kamal Dasu <[email protected]>Cc Jonathan Cameron <[email protected]>Cc Lars-Peter Clausen <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Marc Zyngier <[email protected]>Cc Joerg Roedel <[email protected]>Cc Jassi Brar <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Ulf Hansson <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Wolfgang Grandegger <[email protected]>Cc Marc Kleine-Budde <[email protected]>Cc Andrew Lunn <[email protected]>Cc Vivien Didelot <[email protected]>Cc Vladimir Oltean <[email protected]>Cc Bjorn Helgaas <[email protected]>Cc Kishon Vijay Abraham I <[email protected]>Cc Linus Walleij <[email protected]>Cc "Uwe Kleine-König" <[email protected]>Cc Lee Jones <[email protected]>Cc Ohad Ben-Cohen <[email protected]>Cc Mathieu Poirier <[email protected]>Cc Philipp Zabel <[email protected]>Cc Paul Walmsley <[email protected]>Cc Palmer Dabbelt <[email protected]>Cc Albert Ou <[email protected]>Cc Alessandro Zummo <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Mark Brown <[email protected]>Cc Zhang Rui <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Wim Van Sebroeck <[email protected]>Cc Guenter Roeck <[email protected]>Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 1 - .../devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 1 - Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-sm8350.yaml | 2 -- .../devicetree/bindings/clock/sprd,sc9863a-clk.yaml | 1 - .../devicetree/bindings/crypto/allwinner,sun8i-ce.yaml | 2 -- Documentation/devicetree/bindings/crypto/fsl-dcp.yaml | 1 - .../display/allwinner,sun4i-a10-display-backend.yaml | 6 ------ .../bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml | 1 - .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 4 ---- .../bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml | 2 -- .../bindings/display/allwinner,sun8i-r40-tcon-top.yaml | 2 -- .../devicetree/bindings/display/bridge/cdns,mhdp8546.yaml | 2 -- .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 2 -- Documentation/devicetree/bindings/display/st,stm32-dsi.yaml | 2 -- .../devicetree/bindings/display/st,stm32-ltdc.yaml | 1 - .../devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml | 4 ---- .../devicetree/bindings/dma/renesas,rcar-dmac.yaml | 1 - .../devicetree/bindings/edac/amazon,al-mc-edac.yaml | 2 -- Documentation/devicetree/bindings/eeprom/at24.yaml | 1 - Documentation/devicetree/bindings/example-schema.yaml | 2 -- Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 - Documentation/devicetree/bindings/gpu/vivante,gc.yaml | 1 - Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 1 - .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 2 -- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml | 1 - .../devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml | 1 - .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 -- .../bindings/interrupt-controller/fsl,irqsteer.yaml | 1 - .../bindings/interrupt-controller/loongson,liointc.yaml | 1 - Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml | 1 - .../devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml | 1 - .../devicetree/bindings/mailbox/st,stm32-ipcc.yaml | 2 -- .../devicetree/bindings/media/amlogic,gx-vdec.yaml | 1 - Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 1 - .../devicetree/bindings/media/marvell,mmp2-ccic.yaml | 1 - .../devicetree/bindings/media/qcom,sc7180-venus.yaml | 1 - .../devicetree/bindings/media/qcom,sdm845-venus-v2.yaml | 1 - .../devicetree/bindings/media/qcom,sm8250-venus.yaml | 1 - Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 - .../bindings/memory-controllers/mediatek,smi-common.yaml | 6 ++---- .../bindings/memory-controllers/mediatek,smi-larb.yaml | 1 - .../devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 2 -- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 - Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 2 -- Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml | 2 -- Documentation/devicetree/bindings/mmc/sdhci-am654.yaml | 1 - Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml | 1 - .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 -- .../devicetree/bindings/net/brcm,bcm4908-enet.yaml | 2 -- Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 2 -- Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml | 2 -- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 -- Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 1 - Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 2 -- Documentation/devicetree/bindings/pci/loongson.yaml | 1 - .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 1 - .../devicetree/bindings/pci/microchip,pcie-host.yaml | 2 -- Documentation/devicetree/bindings/perf/arm,cmn.yaml | 1 - .../devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 1 - .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml | 3 --- Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml | 1 - Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-sierra.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-torrent.yaml | 4 ---- .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 1 - .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 - .../devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml | 1 - .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 1 - .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 1 - .../devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 2 -- .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 1 - .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 1 - Documentation/devicetree/bindings/reset/fsl,imx-src.yaml | 1 - .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 1 - .../devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 1 - Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml | 1 - Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 2 -- Documentation/devicetree/bindings/serial/samsung_uart.yaml | 1 - .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 1 - Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml | 2 -- .../bindings/sound/nvidia,tegra-audio-graph-card.yaml | 1 - .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 2 -- Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 3 --- .../devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml | 1 - .../devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml | 2 -- .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 2 -- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 - .../bindings/timer/allwinner,sun5i-a13-hstimer.yaml | 1 -
Quoted 9 lines
Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 1 - .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 -- .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 1 - .../devicetree/bindings/usb/maxim,max3420-udc.yaml | 2 -- .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 4 ---- Documentation/devicetree/bindings/usb/renesas,usbhs.yaml | 3 --- .../devicetree/bindings/watchdog/st,stm32-iwdg.yaml | 1 - 101 files changed, 2 insertions(+), 163 deletions(-)
mailbox stuff
thanks.
Hi Rob,
Quoted 157 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Cc Jens Axboe <[email protected]>Cc Stephen Boyd <[email protected]>Cc Herbert Xu <[email protected]>Cc "David S. Miller" <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Vinod Koul <[email protected]>Cc Bartosz Golaszewski <[email protected]>Cc Kamal Dasu <[email protected]>Cc Jonathan Cameron <[email protected]>Cc Lars-Peter Clausen <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Marc Zyngier <[email protected]>Cc Joerg Roedel <[email protected]>Cc Jassi Brar <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Ulf Hansson <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Wolfgang Grandegger <[email protected]>Cc Marc Kleine-Budde <[email protected]>Cc Andrew Lunn <[email protected]>Cc Vivien Didelot <[email protected]>Cc Vladimir Oltean <[email protected]>Cc Bjorn Helgaas <[email protected]>Cc Kishon Vijay Abraham I <[email protected]>Cc Linus Walleij <[email protected]>Cc "Uwe Kleine-König" <[email protected]>Cc Lee Jones <[email protected]>Cc Ohad Ben-Cohen <[email protected]>Cc Mathieu Poirier <[email protected]>Cc Philipp Zabel <[email protected]>Cc Paul Walmsley <[email protected]>Cc Palmer Dabbelt <[email protected]>Cc Albert Ou <[email protected]>Cc Alessandro Zummo <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Mark Brown <[email protected]>Cc Zhang Rui <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Wim Van Sebroeck <[email protected]>Cc Guenter Roeck <[email protected]>Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 1 - .../devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 1 - Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-sm8350.yaml | 2 -- .../devicetree/bindings/clock/sprd,sc9863a-clk.yaml | 1 - .../devicetree/bindings/crypto/allwinner,sun8i-ce.yaml | 2 -- Documentation/devicetree/bindings/crypto/fsl-dcp.yaml | 1 - .../display/allwinner,sun4i-a10-display-backend.yaml | 6 ------ .../bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml | 1 - .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 4 ---- .../bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml | 2 -- .../bindings/display/allwinner,sun8i-r40-tcon-top.yaml | 2 -- .../devicetree/bindings/display/bridge/cdns,mhdp8546.yaml | 2 -- .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 2 -- Documentation/devicetree/bindings/display/st,stm32-dsi.yaml | 2 -- .../devicetree/bindings/display/st,stm32-ltdc.yaml | 1 - .../devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml | 4 ---- .../devicetree/bindings/dma/renesas,rcar-dmac.yaml | 1 - .../devicetree/bindings/edac/amazon,al-mc-edac.yaml | 2 -- Documentation/devicetree/bindings/eeprom/at24.yaml | 1 - Documentation/devicetree/bindings/example-schema.yaml | 2 -- Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 - Documentation/devicetree/bindings/gpu/vivante,gc.yaml | 1 - Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 1 - .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 2 -- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml | 1 - .../devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml | 1 - .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 -- .../bindings/interrupt-controller/fsl,irqsteer.yaml | 1 - .../bindings/interrupt-controller/loongson,liointc.yaml | 1 - Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml | 1 - .../devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml | 1 - .../devicetree/bindings/mailbox/st,stm32-ipcc.yaml | 2 -- .../devicetree/bindings/media/amlogic,gx-vdec.yaml | 1 - Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 1 - .../devicetree/bindings/media/marvell,mmp2-ccic.yaml | 1 - .../devicetree/bindings/media/qcom,sc7180-venus.yaml | 1 - .../devicetree/bindings/media/qcom,sdm845-venus-v2.yaml | 1 - .../devicetree/bindings/media/qcom,sm8250-venus.yaml | 1 - Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 - .../bindings/memory-controllers/mediatek,smi-common.yaml | 6 ++---- .../bindings/memory-controllers/mediatek,smi-larb.yaml | 1 - .../devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 2 -- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 - Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 2 -- Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml | 2 -- Documentation/devicetree/bindings/mmc/sdhci-am654.yaml | 1 - Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml | 1 - .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 -- .../devicetree/bindings/net/brcm,bcm4908-enet.yaml | 2 -- Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 2 -- Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml | 2 -- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 -- Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 1 - Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 2 -- Documentation/devicetree/bindings/pci/loongson.yaml | 1 - .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 1 - .../devicetree/bindings/pci/microchip,pcie-host.yaml | 2 -- Documentation/devicetree/bindings/perf/arm,cmn.yaml | 1 - .../devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 1 - .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml | 3 --- Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml | 1 - Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-sierra.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-torrent.yaml | 4 ---- .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 1 - .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 - .../devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml | 1 - .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 1 - .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 1 - .../devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 2 -- .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 1 - .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 1 - Documentation/devicetree/bindings/reset/fsl,imx-src.yaml | 1 - .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 1 - .../devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 1 - Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml | 1 - Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 2 -- Documentation/devicetree/bindings/serial/samsung_uart.yaml | 1 - .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 1 - Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml | 2 -- .../bindings/sound/nvidia,tegra-audio-graph-card.yaml | 1 - .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 2 -- Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 3 --- .../devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml | 1 - .../devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml | 2 -- .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 2 -- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 - .../bindings/timer/allwinner,sun5i-a13-hstimer.yaml | 1 - Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 1 - .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 -- .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 1 - .../devicetree/bindings/usb/maxim,max3420-udc.yaml | 2 -- .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 4 ---- Documentation/devicetree/bindings/usb/renesas,usbhs.yaml | 3 --- .../devicetree/bindings/watchdog/st,stm32-iwdg.yaml | 1 - 101 files changed, 2 insertions(+), 163 deletions(-)
[snip]
Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml properties: · line 62
Quoted 12 lines
Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +0
-1@@ -57,7 +57,6 @@ properties: memory-region: minItems: 2 - maxItems: 8 description: | phandle to the reserved memory nodes to be associated with the remoteproc device. There should be at least two reserved memory nodes defined. The
Does this enforce the maxItems to be 2 only now? Or should this be dropping the minItems here which matches the length of items instead of maxItems?
I have originally listed the individual item list only for the mandatory items and rest are scalable. I provided this through "additionalItems: true" under this property.
Also, have the exact same usage in Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml as well which is not included in this patch.
Quoted 12 lines
Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +0
-1@@ -116,7 +116,6 @@ properties: list, in the specified order, each representing the corresponding internal RAM memory region. minItems: 1 - maxItems: 3 items: - const: l2ram - const: l1pram
[snip]
Quoted 13 lines
Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +0
-1@@ -100,7 +100,6 @@ patternProperties: properties: reg: minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. - maxItems: 3 items: - description: Address and size of the Data RAM0. - description: Address and size of the Data RAM1.
Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml patternProperties: · line 115
Quoted 7 lines
Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +0
-1@@ -111,7 +110,6 @@ patternProperties: reg-names: minItems: 2 - maxItems: 3 items: - const: dram0 - const: dram1
regards
Suman
Signature · 3 lines
linux-phy mailing list [email protected] https://lists.infradead.org/mailman/listinfo/linux-phy
Rob Herring
maintainerQuoted 180 lines · Suman Anna
Hi Rob,
Quoted 157 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Cc Jens Axboe <[email protected]>Cc Stephen Boyd <[email protected]>Cc Herbert Xu <[email protected]>Cc "David S. Miller" <[email protected]>Cc David Airlie <[email protected]>Cc Daniel Vetter <[email protected]>Cc Vinod Koul <[email protected]>Cc Bartosz Golaszewski <[email protected]>Cc Kamal Dasu <[email protected]>Cc Jonathan Cameron <[email protected]>Cc Lars-Peter Clausen <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Marc Zyngier <[email protected]>Cc Joerg Roedel <[email protected]>Cc Jassi Brar <[email protected]>Cc Mauro Carvalho Chehab <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Ulf Hansson <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Wolfgang Grandegger <[email protected]>Cc Marc Kleine-Budde <[email protected]>Cc Andrew Lunn <[email protected]>Cc Vivien Didelot <[email protected]>Cc Vladimir Oltean <[email protected]>Cc Bjorn Helgaas <[email protected]>Cc Kishon Vijay Abraham I <[email protected]>Cc Linus Walleij <[email protected]>Cc "Uwe Kleine-König" <[email protected]>Cc Lee Jones <[email protected]>Cc Ohad Ben-Cohen <[email protected]>Cc Mathieu Poirier <[email protected]>Cc Philipp Zabel <[email protected]>Cc Paul Walmsley <[email protected]>Cc Palmer Dabbelt <[email protected]>Cc Albert Ou <[email protected]>Cc Alessandro Zummo <[email protected]>Cc Alexandre Belloni <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Mark Brown <[email protected]>Cc Zhang Rui <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Wim Van Sebroeck <[email protected]>Cc Guenter Roeck <[email protected]>Signed-off-by Rob Herring <[email protected]>--- .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 1 - .../devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 1 - Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml | 2 -- .../devicetree/bindings/clock/qcom,gcc-sm8350.yaml | 2 -- .../devicetree/bindings/clock/sprd,sc9863a-clk.yaml | 1 - .../devicetree/bindings/crypto/allwinner,sun8i-ce.yaml | 2 -- Documentation/devicetree/bindings/crypto/fsl-dcp.yaml | 1 - .../display/allwinner,sun4i-a10-display-backend.yaml | 6 ------ .../bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml | 1 - .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml | 4 ---- .../bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml | 2 -- .../bindings/display/allwinner,sun8i-r40-tcon-top.yaml | 2 -- .../devicetree/bindings/display/bridge/cdns,mhdp8546.yaml | 2 -- .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 2 -- Documentation/devicetree/bindings/display/st,stm32-dsi.yaml | 2 -- .../devicetree/bindings/display/st,stm32-ltdc.yaml | 1 - .../devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml | 4 ---- .../devicetree/bindings/dma/renesas,rcar-dmac.yaml | 1 - .../devicetree/bindings/edac/amazon,al-mc-edac.yaml | 2 -- Documentation/devicetree/bindings/eeprom/at24.yaml | 1 - Documentation/devicetree/bindings/example-schema.yaml | 2 -- Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 - Documentation/devicetree/bindings/gpu/vivante,gc.yaml | 1 - Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 1 - .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 2 -- .../devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml | 1 - .../devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml | 1 - .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 -- .../bindings/interrupt-controller/fsl,irqsteer.yaml | 1 - .../bindings/interrupt-controller/loongson,liointc.yaml | 1 - Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml | 1 - .../devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml | 1 - .../devicetree/bindings/mailbox/st,stm32-ipcc.yaml | 2 -- .../devicetree/bindings/media/amlogic,gx-vdec.yaml | 1 - Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 1 - .../devicetree/bindings/media/marvell,mmp2-ccic.yaml | 1 - .../devicetree/bindings/media/qcom,sc7180-venus.yaml | 1 - .../devicetree/bindings/media/qcom,sdm845-venus-v2.yaml | 1 - .../devicetree/bindings/media/qcom,sm8250-venus.yaml | 1 - Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 - .../bindings/memory-controllers/mediatek,smi-common.yaml | 6 ++---- .../bindings/memory-controllers/mediatek,smi-larb.yaml | 1 - .../devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml | 2 -- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 1 - Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 2 -- Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml | 2 -- Documentation/devicetree/bindings/mmc/sdhci-am654.yaml | 1 - Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml | 1 - .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 2 -- .../devicetree/bindings/net/brcm,bcm4908-enet.yaml | 2 -- Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 2 -- Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml | 2 -- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 -- Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 1 - Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 2 -- Documentation/devicetree/bindings/pci/loongson.yaml | 1 - .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 1 - .../devicetree/bindings/pci/microchip,pcie-host.yaml | 2 -- Documentation/devicetree/bindings/perf/arm,cmn.yaml | 1 - .../devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 1 - .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml | 3 --- Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml | 1 - Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-sierra.yaml | 2 -- .../devicetree/bindings/phy/phy-cadence-torrent.yaml | 4 ---- .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 1 - .../devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 - Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 2 -- Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 - .../devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml | 1 - .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 1 - .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 1 - .../devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 2 -- .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 1 - .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 1 - Documentation/devicetree/bindings/reset/fsl,imx-src.yaml | 1 - .../devicetree/bindings/riscv/sifive-l2-cache.yaml | 1 - .../devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 1 - Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml | 1 - Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 2 -- Documentation/devicetree/bindings/serial/samsung_uart.yaml | 1 - .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 1 - Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml | 2 -- .../bindings/sound/nvidia,tegra-audio-graph-card.yaml | 1 - .../devicetree/bindings/sound/nvidia,tegra210-i2s.yaml | 2 -- Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 3 --- .../devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml | 1 - .../devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml | 2 -- .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 2 -- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 - .../bindings/timer/allwinner,sun5i-a13-hstimer.yaml | 1 - Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 1 - .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 -- .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 1 - .../devicetree/bindings/usb/maxim,max3420-udc.yaml | 2 -- .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 4 ---- Documentation/devicetree/bindings/usb/renesas,usbhs.yaml | 3 --- .../devicetree/bindings/watchdog/st,stm32-iwdg.yaml | 1 - 101 files changed, 2 insertions(+), 163 deletions(-)[snip]
Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml properties: · line 62
Quoted 12 lines
Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +0
-1@@ -57,7 +57,6 @@ properties: memory-region: minItems: 2 - maxItems: 8 description: | phandle to the reserved memory nodes to be associated with the remoteproc device. There should be at least two reserved memory nodes defined. TheDoes this enforce the maxItems to be 2 only now? Or should this be dropping the minItems here which matches the length of items instead of maxItems?
Quoted 3 lines
I have originally listed the individual item list only for the mandatory items and rest are scalable. I provided this through "additionalItems: true" under this property.
Good catch. This should be dropped. The meta-schema doesn't enforce this if "additionalItems: true" which is rarely used.
Quoted 3 lines
Also, have the exact same usage in
Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yamlas well which is not included in this patch.
Yeah, I just missed this one. I've double checked and there aren't any more.
Rob
Hello ROb,
Quoted 9 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
[...]
Quoted 1 line
.../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 --
[...]
Quoted 1 line
.../devicetree/bindings/mailbox/st,stm32-ipcc.yaml | 2 --
[...]
Quoted 1 line
.../devicetree/bindings/remoteproc/st,stm32-rproc.yaml | 2 --
[...]
Quoted 1 line
Documentation/devicetree/bindings/sound/st,stm32-sai.yaml | 3 ---
Thanks,
Arnaud
Hi Rob,
Quoted 14 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Signed-off-by Rob Herring <[email protected]>
Documentation/devicetree/bindings/net/stm32-dwmac.yaml properties: · line 51
Quoted 7 lines
Documentation/devicetree/bindings/net/stm32-dwmac.yaml +0
-1@@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 5 items: - description: GMAC main clock - description: MAC TX clock
While resolving the conflict with commit fea99822914039c6 ("dt-bindings: net: document ptp_ref clk in dwmac") in soc/for-next, I noticed the following construct for clock-names:
clock-names:
minItems: 3
maxItems: 6
contains:
enum:
- stmmaceth
- mac-clk-tx
- mac-clk-rx
- ethstp
- eth-ck
- ptp_ref
Should this use items instead of enum, and drop maxItems, or is this a valid construct to support specifying the clocks in random order? If the latter, it does mean that the order of clock-names may not match the order of the clock descriptions.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Rob Herring
maintainerQuoted 42 lines · Geert Uytterhoeven
Hi Rob,
Quoted 14 lines · Rob Herring
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems.
This condition is partially checked with the meta-schema already, but only if both 'minItems' and 'maxItems' are equal to the 'items' length. An improved meta-schema is pending.
Signed-off-by Rob Herring <[email protected]>Documentation/devicetree/bindings/net/stm32-dwmac.yaml properties: · line 51
Quoted 7 lines
Documentation/devicetree/bindings/net/stm32-dwmac.yaml +0
-1@@ -46,7 +46,6 @@ properties: clocks: minItems: 3 - maxItems: 5 items: - description: GMAC main clock - description: MAC TX clockWhile resolving the conflict with commit
fea99822914039c6("dt-bindings: net: documentptp_refclk in dwmac") in soc/for-next, I noticed the following construct for clock-names:clock-names:
minItems: 3
maxItems: 6
contains:
enum:
- stmmaceth
- mac-clk-tx
- mac-clk-rx
- ethstp
- eth-ck
-ptp_ref
Quoted 4 lines
Should this use items instead of enum, and drop maxItems, or is this a valid construct to support specifying the clocks in random order? If the latter, it does mean that the order of clock-names may not match the order of the clock descriptions.
'contains' is true if one or more entries match the strings. So it is really saying one of these is required. That's not really much of a constraint. There's 'minContains' and 'maxContains' in newer json-schema versions (not yet supported) that could add some constraints if there has to be at least N entries from contains. An 'items' schema (as opposed to a list) would say all items have to match one of the strings. I'm sure that's too strict.
TLDR: clocks for this binding are a mess and the above is probably all we can do here.
Rob