perl: avoid the source file patched twice
PATCH 1/1 perl: avoid the source file patched twice
From: Mingli Yu <[email protected]>
After the commit(60dcb230f6 perl: split perl-cross into its own recipe) introduced, the source files mainly come from two parts, one is from SRI_URI during do_fetch and the other with below means during do_configure.
do_configure_prepend() {
cp -rfp ${STAGING_DATADIR_NATIVE}/perl-cross/* ${S}
}And the source files will be changed during do_compile with below logic in Makefile.
$(CROSSPATCHED): %.applied: %.patch
patch -p1 -i $< && touch $@
And there comes build failure with below steps:
$ bitbake perl-native
Make a change as below
$ git diff
diff --git a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb
index b77bbd1fd4..4c5e35ab80 100644
--- a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb
+++ b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb
@@ -33,6 +33,7 @@ do_compile () {
do_install_class-native() {
mkdir -p ${D}/${datadir}/perl-cross/
cp -rf ${S}/* ${D}/${datadir}/perl-cross/
+ echo "test" > ${D}/${datadir}/perl-cross/testfile
}$ bitbake perl-native | NOTE: make -j 48 | make crosspatch | make[1]: Entering directory '/buildarea1/myu2/wr_build/wr1021_20210616_perl/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0' | patch -p1 -i cnf/diffs/perl5-5.34.0/time-hires.patch && touch cnf/diffs/perl5-5.34.0/time-hires.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/xconfig.patch && touch cnf/diffs/perl5-5.34.0/xconfig.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/posix-makefile.patch && touch cnf/diffs/perl5-5.34.0/posix-makefile.applied | File dist/Time-HiRes/Makefile.PL is read-only; trying to patch anyway | patching file dist/Time-HiRes/Makefile.PL | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 4 out of 4 hunks ignored -- saving rejects to file dist/Time-HiRes/Makefile.PL.rej | patch -p1 -i cnf/diffs/perl5-5.34.0/test-commonsense.patch && touch cnf/diffs/perl5-5.34.0/test-commonsense.applied | File perl.h is read-only; trying to patch anyway | patching file perl.h | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 1 out of 1 hunk ignored -- saving rejects to file perl.h.rej | make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/time-hires.applied] Error 1 [snip]
It's because the source files patched twice, so let do_fetch always executed to make sure the source files which come from SRC_URI brand new in each build to avoid the source files patched twice to fix the build failure as above.
--- meta/recipes-devtools/perl/perl_5.34.0.bb | 2 ++ 1 file changed, 2 insertions(+)
meta/recipes-devtools/perl/perl_5.34.0.bb +2 -0
@@ -382,3 +382,5 @@ EOF chmod 0755 ${SYSROOT_DESTDIR}${bindir}/nativeperl cat ${SYSROOT_DESTDIR}${bindir}/nativeperl } + +do_fetch[nostamp] = "1"
Signature · 1 line
2.17.1
Hello,
Quoted 68 lines · Mingli
From: Mingli Yu <[email protected]>
After the commit(60dcb230f6 perl: split perl-cross into its own recipe) introduced, the source files mainly come from two parts, one is from
SRI_URIduringdo_fetchand the other with below means duringdo_configure.do_configure_prepend() { cp -rfp ${STAGING_DATADIR_NATIVE}/perl-cross/* ${S} }And the source files will be changed during
do_compilewith below logic inMakefile.
$(CROSSPATCHED): %.applied: %.patchpatch -p1 -i $< && touch $@And there comes build failure with below steps:
$ bitbake perl-nativeMake a change as below
$ git diff diff --git a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb index b77bbd1fd4..4c5e35ab80 100644 --- a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb +++ b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb @@ -33,6 +33,7 @@ do_compile () { do_install_class-native() { mkdir -p ${D}/${datadir}/perl-cross/ cp -rf ${S}/* ${D}/${datadir}/perl-cross/ + echo "test" > ${D}/${datadir}/perl-cross/testfile }$ bitbake perl-native | NOTE: make -j 48 | make crosspatch | make[1]: Entering directory '/buildarea1/myu2/wr_build/wr1021_20210616_perl/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0' | patch -p1 -i cnf/diffs/perl5-5.34.0/time-hires.patch && touch cnf/diffs/perl5-5.34.0/time-hires.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/xconfig.patch && touch cnf/diffs/perl5-5.34.0/xconfig.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/posix-makefile.patch && touch cnf/diffs/perl5-5.34.0/posix-makefile.applied | File dist/Time-HiRes/Makefile.PL is read-only; trying to patch anyway | patching file dist/Time-HiRes/Makefile.PL | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 4 out of 4 hunks ignored -- saving rejects to file dist/Time-HiRes/Makefile.PL.rej | patch -p1 -i cnf/diffs/perl5-5.34.0/test-commonsense.patch && touch cnf/diffs/perl5-5.34.0/test-commonsense.applied | File perl.h is read-only; trying to patch anyway | patching file perl.h | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 1 out of 1 hunk ignored -- saving rejects to file perl.h.rej | make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/time-hires.applied] Error 1 [snip]It's because the source files patched twice, so let
do_fetchalways executed to make sure the source files which come fromSRC_URIbrand new in each build to avoid the source files patched twice to fix the build failure as above.Signed-off-by Mingli Yu <[email protected]>--- meta/recipes-devtools/perl/perl_5.34.0.bb | 2 ++ 1 file changed, 2 insertions(+)meta/recipes-devtools/perl/perl_5.34.0.bb +0
-0
meta/recipes-devtools/perl/perl_5.34.0.bb EOF · line 386
Quoted 5 lines
meta/recipes-devtools/perl/perl_5.34.0.bb +2
-0@@ -382,3 +382,5 @@ EOF chmod 0755 ${SYSROOT_DESTDIR}${bindir}/nativeperl cat ${SYSROOT_DESTDIR}${bindir}/nativeperl } + +do_fetch[nostamp] = "1"
This seems to cause:
ERROR: The perl-native:do_fetch sig is computed to be ad5d35a67fb7dfcb2a67797631d358f99809c2c568f44db1b4e866f894368d3e, but the sig is locked to b715d1392c57c5341b05be30d4cdeaf2a443bae900890da8e053b9fc1650480b in SIGGEN_LOCKEDSIGS_t-x86-64 The perl:do_fetch sig is computed to be 83844d137b60382447e71889fc92deb568e52f2f9e8b214d86c3a608af8e8bce, but the sig is locked to a269ce4ca52954820059edc72f464379b71186be0b0bd9927b3fb3d716395e66 in SIGGEN_LOCKEDSIGS_t-core2-64
See https://autobuilder.yoctoproject.org/typhoon/#/builders/69/builds/3557/steps/24/logs/stdio
Can you check?
Regards
Quoted 7 lines
Signature · 2 lines
2.17.1 zO
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi Alex,
Quoted 81 lines · Alexandre Belloni
[Please note: This e-mail is from an EXTERNAL e-mail address]
Hello,
Quoted 68 lines · Mingli
From: Mingli Yu <[email protected]>
After the commit(60dcb230f6 perl: split perl-cross into its own recipe) introduced, the source files mainly come from two parts, one is from
SRI_URIduringdo_fetchand the other with below means duringdo_configure.do_configure_prepend() { cp -rfp ${STAGING_DATADIR_NATIVE}/perl-cross/* ${S} }And the source files will be changed during
do_compilewith below logic inMakefile.
$(CROSSPATCHED): %.applied: %.patchpatch -p1 -i $< && touch $@And there comes build failure with below steps:
$ bitbake perl-nativeMake a change as below
$ git diff diff --git a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb index b77bbd1fd4..4c5e35ab80 100644 --- a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb +++ b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb @@ -33,6 +33,7 @@ do_compile () { do_install_class-native() { mkdir -p ${D}/${datadir}/perl-cross/ cp -rf ${S}/* ${D}/${datadir}/perl-cross/ + echo "test" > ${D}/${datadir}/perl-cross/testfile }$ bitbake perl-native | NOTE: make -j 48 | make crosspatch | make[1]: Entering directory '/buildarea1/myu2/wr_build/wr1021_20210616_perl/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0' | patch -p1 -i cnf/diffs/perl5-5.34.0/time-hires.patch && touch cnf/diffs/perl5-5.34.0/time-hires.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/xconfig.patch && touch cnf/diffs/perl5-5.34.0/xconfig.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/posix-makefile.patch && touch cnf/diffs/perl5-5.34.0/posix-makefile.applied | File dist/Time-HiRes/Makefile.PL is read-only; trying to patch anyway | patching file dist/Time-HiRes/Makefile.PL | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 4 out of 4 hunks ignored -- saving rejects to file dist/Time-HiRes/Makefile.PL.rej | patch -p1 -i cnf/diffs/perl5-5.34.0/test-commonsense.patch && touch cnf/diffs/perl5-5.34.0/test-commonsense.applied | File perl.h is read-only; trying to patch anyway | patching file perl.h | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 1 out of 1 hunk ignored -- saving rejects to file perl.h.rej | make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/time-hires.applied] Error 1 [snip]It's because the source files patched twice, so let
do_fetchalways executed to make sure the source files which come fromSRC_URIbrand new in each build to avoid the source files patched twice to fix the build failure as above.Signed-off-by Mingli Yu <[email protected]>--- meta/recipes-devtools/perl/perl_5.34.0.bb | 2 ++ 1 file changed, 2 insertions(+)meta/recipes-devtools/perl/perl_5.34.0.bb +0
-0meta/recipes-devtools/perl/perl_5.34.0.bb EOF · line 386
Quoted 5 lines
meta/recipes-devtools/perl/perl_5.34.0.bb +2
-0@@ -382,3 +382,5 @@ EOF chmod 0755 ${SYSROOT_DESTDIR}${bindir}/nativeperl cat ${SYSROOT_DESTDIR}${bindir}/nativeperl } + +do_fetch[nostamp] = "1"This seems to cause:
Quoted 4 lines
ERROR: The perl-native:do_fetch sig is computed to be
ad5d35a67fb7dfcb2a67797631d358f99809c2c568f44db1b4e866f894368d3e, but the sig is locked tob715d1392c57c5341b05be30d4cdeaf2a443bae900890da8e053b9fc1650480bin SIGGEN_LOCKEDSIGS_t-x86-64 The perl:do_fetch sig is computed to be83844d137b60382447e71889fc92deb568e52f2f9e8b214d86c3a608af8e8bce, but the sig is locked toa269ce4ca52954820059edc72f464379b71186be0b0bd9927b3fb3d716395e66in SIGGEN_LOCKEDSIGS_t-core2-64See https://autobuilder.yoctoproject.org/typhoon/#/builders/69/builds/3557/steps/24/logs/stdio
I didn't reproduce the issue in my env, I notice there is a config "require ../locked-sigs.inc" at https://autobuilder.yoctoproject.org/typhoon/#/builders/69/builds/3557/steps/24/logs/stdio, what's ../locked-sigs.inc?
Thanks,
Quoted 19 lines
Can you check?
Regards
Quoted 7 lines
--
2.17.1
zO--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Quoted 71 lines · Mingli
From: Mingli Yu <[email protected]>
After the commit(60dcb230f6 perl: split perl-cross into its own recipe) introduced, the source files mainly come from two parts, one is from
SRI_URIduringdo_fetchand the other with below means duringdo_configure.do_configure_prepend(){
cp -rfp ${STAGING_DATADIR_NATIVE}/perl-cross/* ${S}
}And the source files will be changed during
do_compilewith below logic inMakefile.
$(CROSSPATCHED): %.applied: %.patch
patch -p1 -i $< && touch $@And there comes build failure with below steps:
$ bitbake perl-nativeMake a change as below
$ git diff diff --git a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb index b77bbd1fd4..4c5e35ab80 100644 --- a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb +++ b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb @@ -33,6 +33,7 @@ do_compile () { do_install_class-native() { mkdir -p ${D}/${datadir}/perl-cross/ cp -rf ${S}/* ${D}/${datadir}/perl-cross/ + echo "test" > ${D}/${datadir}/perl-cross/testfile }$ bitbake perl-native | NOTE: make -j 48 | make crosspatch | make[1]: Entering directory '/buildarea1/myu2/wr_build/wr1021_20210616_perl/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0' | patch -p1 -i cnf/diffs/perl5-5.34.0/time-hires.patch && touch cnf/diffs/perl5-5.34.0/time-hires.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/xconfig.patch && touch cnf/diffs/perl5-5.34.0/xconfig.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/posix-makefile.patch && touch cnf/diffs/perl5-5.34.0/posix-makefile.applied | File dist/Time-HiRes/Makefile.PL is read-only; trying to patch anyway | patching file dist/Time-HiRes/Makefile.PL | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 4 out of 4 hunks ignored -- saving rejects to file dist/Time-HiRes/Makefile.PL.rej | patch -p1 -i cnf/diffs/perl5-5.34.0/test-commonsense.patch && touch cnf/diffs/perl5-5.34.0/test-commonsense.applied | File perl.h is read-only; trying to patch anyway | patching file perl.h | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 1 out of 1 hunk ignored -- saving rejects to file perl.h.rej | make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/time-hires.applied] Error 1 [snip]It's because the source files patched twice, so let
do_fetchalways executed to make sure the source files which come fromSRC_URIbrand new in each build to avoid the source files patched twice to fix the build failure as above.Signed-off-by Mingli Yu <[email protected]>---
meta/recipes-devtools/perl/perl_5.34.0.bb | 2 ++1 file changed, 2 insertions(+)meta/recipes-devtools/perl/perl_5.34.0.bb +0
-0@@ -382,3 +382,5 @@ EOFchmod 0755 ${SYSROOT_DESTDIR}${bindir}/nativeperl cat ${SYSROOT_DESTDIR}${bindir}/nativeperl }
meta/recipes-devtools/perl/perl_5.34.0.bb EOF · line 386
Quoted 2 lines
meta/recipes-devtools/perl/perl_5.34.0.bb +2
-0+ +do_fetch[nostamp] = "1"
This patch is incorrect, it would cause tasks to rerun all the time and is not the correct way to solve this problem. We don't use nostamp tasks in mid tree tasks.
Cheers,
Richard
Quoted 66 lines · Richard Purdie
[Please note: This e-mail is from an EXTERNAL e-mail address]
Quoted 63 lines · Mingli
From: Mingli Yu <[email protected]>
After the commit(60dcb230f6 perl: split perl-cross into its own recipe) introduced, the source files mainly come from two parts, one is from
SRI_URIduringdo_fetchand the other with below means duringdo_configure.do_configure_prepend() { cp -rfp ${STAGING_DATADIR_NATIVE}/perl-cross/* ${S} }And the source files will be changed during
do_compilewith below logic inMakefile.
$(CROSSPATCHED): %.applied: %.patchpatch -p1 -i $< && touch $@And there comes build failure with below steps:
$ bitbake perl-nativeMake a change as below
$ git diff diff --git a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb index b77bbd1fd4..4c5e35ab80 100644 --- a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb +++ b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb @@ -33,6 +33,7 @@ do_compile () { do_install_class-native() { mkdir -p ${D}/${datadir}/perl-cross/ cp -rf ${S}/* ${D}/${datadir}/perl-cross/ + echo "test" > ${D}/${datadir}/perl-cross/testfile }$ bitbake perl-native | NOTE: make -j 48 | make crosspatch | make[1]: Entering directory '/buildarea1/myu2/wr_build/wr1021_20210616_perl/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0' | patch -p1 -i cnf/diffs/perl5-5.34.0/time-hires.patch && touch cnf/diffs/perl5-5.34.0/time-hires.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/xconfig.patch && touch cnf/diffs/perl5-5.34.0/xconfig.applied | patch -p1 -i cnf/diffs/perl5-5.34.0/posix-makefile.patch && touch cnf/diffs/perl5-5.34.0/posix-makefile.applied | File dist/Time-HiRes/Makefile.PL is read-only; trying to patch anyway | patching file dist/Time-HiRes/Makefile.PL | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 4 out of 4 hunks ignored -- saving rejects to file dist/Time-HiRes/Makefile.PL.rej | patch -p1 -i cnf/diffs/perl5-5.34.0/test-commonsense.patch && touch cnf/diffs/perl5-5.34.0/test-commonsense.applied | File perl.h is read-only; trying to patch anyway | patching file perl.h | Reversed (or previously applied) patch detected! Assume -R? [n] | Apply anyway? [n] | Skipping patch. | 1 out of 1 hunk ignored -- saving rejects to file perl.h.rej | make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/time-hires.applied] Error 1 [snip]It's because the source files patched twice, so let
do_fetchalways executed to make sure the source files which come fromSRC_URIbrand new in each build to avoid the source files patched twice to fix the build failure as above.Signed-off-by Mingli Yu <[email protected]>--- meta/recipes-devtools/perl/perl_5.34.0.bb | 2 ++ 1 file changed, 2 insertions(+)
Quoted 14 lines
meta/recipes-devtools/perl/perl_5.34.0.bb EOF · line 386
Quoted 10 lines
meta/recipes-devtools/perl/perl_5.34.0.bb +2
-0@@ -382,3 +382,5 @@ EOF chmod 0755 ${SYSROOT_DESTDIR}${bindir}/nativeperl cat ${SYSROOT_DESTDIR}${bindir}/nativeperl } + +do_fetch[nostamp] = "1"This patch is incorrect, it would cause tasks to rerun all the time and is not the correct way to solve this problem. We don't use nostamp tasks in mid tree tasks.
Hi RP,
Any suggestion to solve the issue? I'm also researching a better solution.
Thanks,
Quoted 5 lines
Cheers,
Richard