Skip to contentSkip to conversation

drm/etnaviv: add GC7000 r6202 support

PATCH In review Michael Walle 2 participants 4 messages Jun 18, 2021 – Jul 6, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover drm/etnaviv: add GC7000 r6202 support

This is the first step to bring GPU support to the NXP LS1028A SoC. It features a Mali DP500, a Vivante GC7000 and has one DisplayPort output which is driven by a Cadence MHDP controller and PHY.

This was briefly tested with glmark2, a patched mesa kmsro driver [1] to support the mali DP500/GC7000 duo, fixes from mesa merge request 9255 [2] and using ETNA_MESA_DEBUG=no_supertile,no_ts.

[1] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11419
[2] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9255

Michael Walle (2):
drm/etnaviv: add HWDB entry for GC7000 r6202 drm/etnaviv: add clock gating workaround for GC7000 r6202

 drivers/gpu/drm/etnaviv/etnaviv_gpu.c  |  6 +++++
 drivers/gpu/drm/etnaviv/etnaviv_hwdb.c | 31 ++++++++++++++++++++++++++
 2 files changed, 37 insertions(+)
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/2 drm/etnaviv: add HWDB entry for GC7000 r6202

The GPU is found on the NXP LS1028A SoC. The feature bits are taken from the NXP downstream kernel driver 6.4.3.p1.

---
changes since RFC:
- none

 drivers/gpu/drm/etnaviv/etnaviv_hwdb.c | 31 ++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/gpu/drm/etnaviv/etnaviv_hwdb.c +31 -0
index dfc0f536b3b9..f2fc645c7956 100644
@@ -37,6 +37,37 @@ static const struct etnaviv_chip_identity etnaviv_chip_identities[] = {
 		.minor_features10 = 0x0,
 		.minor_features11 = 0x0,
 	},
+	{
+		.model = 0x7000,
+		.revision = 0x6202,
+		.product_id = 0x70003,
+		.customer_id = 0,
+		.eco_id = 0,
+		.stream_count = 8,
+		.register_max = 64,
+		.thread_count = 512,
+		.shader_core_count = 2,
+		.vertex_cache_size = 16,
+		.vertex_output_buffer_size = 1024,
+		.pixel_pipes = 1,
+		.instruction_count = 512,
+		.num_constants = 320,
+		.buffer_size = 0,
+		.varyings_count = 16,
+		.features = 0xe0287cad,
+		.minor_features0 = 0xc1489eff,
+		.minor_features1 = 0xfefbfad9,
+		.minor_features2 = 0xeb9d4fbf,
+		.minor_features3 = 0xedfffced,
+		.minor_features4 = 0xdb0dafc7,
+		.minor_features5 = 0x3b5ac333,
+		.minor_features6 = 0xfccee201,
+		.minor_features7 = 0x03fffa6f,
+		.minor_features8 = 0x00e10ef0,
+		.minor_features9 = 0x0088003c,
+		.minor_features10 = 0x00004040,
+		.minor_features11 = 0x00000024,
+	},
 	{
 		.model = 0x7000,
 		.revision = 0x6204,
Signature · 1 line
2.20.1
#2 lore raw

PATCH 2/2 drm/etnaviv: add clock gating workaround for GC7000 r6202

In reply to Michael Walle

The LS1028A SoC errata sheet mentions A-050121 "GPU hangs if clock gating for Rasterizer, Setup Engine and Texture Engine are enabled". The workaround is to disable the corresponding clock gatings.

---
changes since RFC:
- corrected the wording of the comment

 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/etnaviv/etnaviv_gpu.c +6 -0
index 4102bcea3341..c297fffe06eb 100644
@@ -613,6 +613,12 @@ static void etnaviv_gpu_enable_mlcg(struct etnaviv_gpu *gpu)
 	    etnaviv_is_model_rev(gpu, GC2000, 0x5108))
 		pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_TX;
 
+	/* Disable SE, RA and TX clock gating on affected core revisions. */
+	if (etnaviv_is_model_rev(gpu, GC7000, 0x6202))
+		pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_SE |
+		       VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_RA |
+		       VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_TX;
+
 	pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_RA_HZ;
 	pmc |= VIVS_PM_MODULE_CONTROLS_DISABLE_MODULE_CLOCK_GATING_RA_EZ;
 
Signature · 1 line
2.20.1
maintainer
#3 lore raw
In reply to Michael Walle

Am Freitag, dem 18.06.2021 um 14:04 +0200 schrieb Michael Walle:

Quoted 11 lines

This is the first step to bring GPU support to the NXP LS1028A SoC. It features a Mali DP500, a Vivante GC7000 and has one DisplayPort output which is driven by a Cadence MHDP controller and PHY.

This was briefly tested with glmark2, a patched mesa kmsro driver [1] to support the mali DP500/GC7000 duo, fixes from mesa merge request 9255 [2] and using ETNA_MESA_DEBUG=no_supertile,no_ts.

[1] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11419
[2] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9255

Quoted 7 lines

Michael Walle (2):
drm/etnaviv: add HWDB entry for GC7000 r6202 drm/etnaviv: add clock gating workaround for GC7000 r6202

 drivers/gpu/drm/etnaviv/etnaviv_gpu.c  |  6 +++++
 drivers/gpu/drm/etnaviv/etnaviv_hwdb.c | 31 ++++++++++++++++++++++++++
 2 files changed, 37 insertions(+)

Thanks, I've applied this series to my etnaviv/next branch.

Regards,
Lucas