Skip to contentSkip to conversation

Nokia RX-51: Update documentation about ext2/3/4

PATCH In review Pali Rohár 2 participants 3 messages Jun 18, 2021 – Jul 21, 2021

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Nokia RX-51: Update documentation about ext2/3/4

Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load and ext4load") command ext4load is used for all ext2/3/4 fs variants.

---
 doc/README.nokia_rx51 | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
doc/README.nokia_rx51 +2 -3
index 7f22ed49bd75..1be077514f03 100644
@@ -44,8 +44,7 @@ Boot from SD or eMMC in this order:
    * 1.2 find uImage on first fat partition
    * 1.3 find zImage on first fat partition
    * 1.4 same order for 2. - 4. fat partition
- * 2. same as 1. but for ext2/3 partition
- * 3. same as 1. but for ext4 partition
+ * 2. same as 1. but for ext2/3/4 partition
 
 
 Available additional commands/variables:
@@ -70,7 +69,7 @@ Additional variables for loading files from mmc:
 
  * mmc ${mmcnum} (0 - external, 1 - internal)
  * partition number ${mmcpart} (1 - 4)
- * parition type ${mmctype} (fat, ext2, ext4)
+ * partition type ${mmctype} (fat, ext2, ext4; ext2 is just alias for ext4)
 
 Additional variables for booting kernel:
 
Signature · 1 line
2.20.1
#1 lore raw
Quoted 7 lines · Pali Rohár

Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load and ext4load") command ext4load is used for all ext2/3/4 fs variants.

---
 doc/README.nokia_rx51 | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Can you please convert this to rST and move it under doc/board/ ? Thanks!

Signature · 1 line
Tom
#2 lore raw
Quoted 5 lines · On Friday 18 June 2021 13:07:08 Tom Rini wrote:
Quoted 3 lines · Pali Rohár

Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load and ext4load") command ext4load is used for all ext2/3/4 fs variants.

Quoted 7 lines
Quoted 4 lines
---
 doc/README.nokia_rx51 | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Can you please convert this to rST and move it under doc/board/ ? Thanks!

Done, here is link to patch:
http://patchwork.ozlabs.org/project/uboot/patch/[email protected]/