Skip to contentSkip to conversation

arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc

PATCH Applied Alex Bee 2 participants 2 messages Jun 19, 2021

Subsystems (2)
lore
Share & tools
lore

Alex Bee

author
#0 lore raw

PATCH 1/1 arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc

Like some other RK3399 boards RK3399-ROC-PC has an ir receiver connected to pwm3 which can be used as gpio-ir-receiver.

---
 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +13 -0
index 8b27ee4be755..d1aaf8e83391 100644
@@ -63,6 +63,13 @@ power {
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -604,6 +611,12 @@ pwr_key_l: pwr-key-l {
 		};
 	};
 
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	lcd-panel {
 		lcd_panel_reset: lcd-panel-reset {
 			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
Signature · 1 line
2.27.0
maintainer Applied
#1 lore raw
Quoted 2 lines · Alex Bee

Like some other RK3399 boards RK3399-ROC-PC has an ir receiver connected to pwm3 which can be used as gpio-ir-receiver.

Applied, thanks!

[1/1] arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc

      commit: e1d635bc94bce69e45a2d4e93c94178613e01229

Best regards,

Signature · 1 line
Heiko Stuebner <[email protected]>