Skip to contentSkip to conversation

mv88e6xxx: fixed adding vlan 0

PATCH New Eldar Gasanov 1 participant 1 message Jun 21, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mv88e6xxx: fixed adding vlan 0

8021q module adds vlan 0 to all interfaces when it starts. When 8021q module is loaded it isn't possible to create bond with mv88e6xxx interfaces, bonding module dipslay error "Couldn't add bond vlan ids", because it tries to add vlan 0 to slave interfaces.

There is unexpected behavior in the switch. When a PVID is assigned to a port the switch changes VID to PVID in ingress frames with VID 0 on the port. Expected that the switch doesn't assign PVID to tagged frames with VID 0. But there isn't a way to change this behavior in the switch.

---
 drivers/net/dsa/mv88e6xxx/chip.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/dsa/mv88e6xxx/chip.c +4 -4
index eca285aaf72f..3c6ca9028251 100644
@@ -1618,9 +1618,6 @@ static int mv88e6xxx_port_check_hw_vlan(struct dsa_switch *ds, int port,
 	struct mv88e6xxx_vtu_entry vlan;
 	int i, err;
 
-	if (!vid)
-		return -EOPNOTSUPP;
-
 	/* DSA and CPU ports have to be members of multiple vlans */
 	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
 		return 0;
@@ -2109,6 +2106,9 @@ static int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
 	u8 member;
 	int err;
 
+	if (!vlan->vid)
+		return 0;
+
 	err = mv88e6xxx_port_vlan_prepare(ds, port, vlan);
 	if (err)
 		return err;
@@ -6355,7 +6355,7 @@ static const struct of_device_id mv88e6xxx_of_match[] = {
 		.data = &mv88e6xxx_table[MV88E6085],
 	},
 	{
-		.compatible = "marvell,mv88e6190",
+		.compatible = "marvell,mv88e6190",mv88e6xxx_g1_vtu_vid_write
 		.data = &mv88e6xxx_table[MV88E6190],
 	},
 	{
Signature · 1 line
2.25.1