target/s390x: Fix SIGILL psw.addr reporting
v4 cover target/s390x: Fix SIGILL psw.addr reporting
qemu-s390x puts a wrong value into SIGILL's siginfo_t's psw.addr: it should be a pointer to the instruction following the illegal instruction, but at the moment it is a pointer to the illegal instruction itself. This breaks OpenJDK, which relies on this value.
Patch 1 fixes the issue, patch 2 adds a test.
v1: https://lists.nongnu.org/archive/html/qemu-devel/2021-05/msg06592.html
v1 -> v2: Use a better buglink (Cornelia), simplify the inline asm
magic in the test and add an explanation (David).
v2: https://lists.nongnu.org/archive/html/qemu-devel/2021-05/msg06649.html
v2 -> v3: Fix SIGSEGV handling (found when trying to run valgrind under
qemu-user).
v3: https://lists.nongnu.org/archive/html/qemu-devel/2021-06/msg00299.html
v3 -> v4: Fix compiling the test on Ubuntu 20.04 (Jonathan).
Note: the SIGFPE issue is being fixed separately.
https://lists.nongnu.org/archive/html/qemu-devel/2021-06/msg05690.html
Ilya Leoshkevich (2):
target/s390x: Fix SIGILL psw.addr reporting tests/tcg/s390x: Test SIGILL and SIGSEGV handling
linux-user/s390x/cpu_loop.c | 23 ++++- target/s390x/excp_helper.c | 71 +++++++------- target/s390x/internal.h | 1 + target/s390x/mem_helper.c | 2 +- tests/tcg/s390x/Makefile.target | 1 + tests/tcg/s390x/signal.c | 165 ++++++++++++++++++++++++++++++++ 6 files changed, 226 insertions(+), 37 deletions(-) create mode 100644 tests/tcg/s390x/signal.c
Signature · 1 line
2.31.1
PATCH v4 1/2 target/s390x: Fix SIGILL psw.addr reporting
When a s390x CPU attempts to execute an illegal instruction, an operation exception is recognized. This is a suppressing exception, which means that the PSW is advanced by the length of the illegal instruction.
On the real hardware or in qemu-system-s390x the kernel then raises SIGILL with si_addr pointing to the suppressed instruction and psw.addr containing the updated PSW.
Unfortunately qemu-s390x sets both to the address of the suppressed instruction at the moment. Fix by sharing the PSW advancement logic with qemu-system-s390x and setting si_addr to the address of the instruction that raised the exception.
Sharing the PSW advancement logic means, however, that now the helpers and the CPU loop must follow the hardware and the kernel a little bit more strictly. In particular:
* Unmapped memory accesses should result in a translation rather than in an addressing exception.
* Protection exception must rewind psw.addr.
* Translation exception must cause a SIGSEGV.
While at it, also fix the handling of addressing and privileged operation exceptions.
--- linux-user/s390x/cpu_loop.c | 23 ++++++++++-- target/s390x/excp_helper.c | 71 ++++++++++++++++++++----------------- target/s390x/internal.h | 1 + target/s390x/mem_helper.c | 2 +- 4 files changed, 60 insertions(+), 37 deletions(-)
linux-user/s390x/cpu_loop.c +20 -3
@@ -21,6 +21,7 @@#include "qemu-common.h" #include "qemu.h" #include "cpu_loop-common.h" +#include "internal.h" /* s390x masks the fault address it reports in si_addr for SIGSEGV and SIGBUS */ #define S390X_FAIL_ADDR_MASK -4096LL
@@ -29,6 +30,7 @@ void cpu_loop(CPUS390XState *env) {CPUState *cs =env_cpu (env);int trapnr, n, sig; +target_ulong excp_psw_addr;target_siginfo_t info;target_ulong addr;abi_long ret;
@@ -38,6 +40,7 @@ void cpu_loop(CPUS390XState *env) trapnr =cpu_exec (cs);cpu_exec_end (cs);process_queued_cpu_work (cs); + excp_psw_addr = env->psw.addr;switch (trapnr) {case EXCP_INTERRUPT :
@@ -66,15 +69,29 @@ void cpu_loop(CPUS390XState *env) n =TARGET_TRAP_BRKPT ; goto do_signal_pc;case EXCP_PGM : +s390_cpu_program_interrupt_advance_psw (env); n = env->int_pgm_code;switch (n) {case PGM_OPERATION : -case PGM_PRIVILEGED : sig =TARGET_SIGILL ; n =TARGET_ILL_ILLOPC ; goto do_signal_pc; -case PGM_PROTECTION : +case PGM_PRIVILEGED : + sig =TARGET_SIGILL ; + n =TARGET_ILL_PRVOPC ; + goto do_signal_pc;case PGM_ADDRESSING : + sig =TARGET_SIGILL ; + n =TARGET_ILL_ILLADR ; + goto do_signal_pc; +case PGM_PROTECTION : +/* +* Protection exception handler is special: it is the only one +* that rewinds psw.addr. +*/ + env->psw.addr = excp_psw_addr; +/* FALL THROUGH */ +case PGM_PAGE_TRANS : sig =TARGET_SIGSEGV ;/* XXX: check env->error_code */ n =TARGET_SEGV_MAPERR ;
@@ -131,7 +148,7 @@ void cpu_loop(CPUS390XState *env)break ; do_signal_pc: - addr = env->psw.addr; + addr = excp_psw_addr; do_signal: info.si_signo = sig; info.si_errno =0 ;
target/s390x/excp_helper.c +38 -33
89 lines not on this page · raw message
target/s390x/internal.h +1 -0
@@ -272,6 +272,7 @@ bool s390_cpu_tlb_fill(CPUState *cs, vaddr address, int size,void s390x_cpu_do_unaligned_access (CPUState *cs,vaddr addr,MMUAccessType access_type,int mmu_idx,uintptr_t retaddr); +void s390_cpu_program_interrupt_advance_psw (CPUS390XState *cpu);/* fpu_helper.c */
target/s390x/mem_helper.c +1 -1
@@ -147,7 +147,7 @@ static int s390_probe_access(CPUArchState *env, target_ulong addr, int size, flags =page_get_flags (addr);if (!(flags & (access_type ==MMU_DATA_LOAD ?PAGE_READ :PAGE_WRITE_ORG ))) { env->__excp_addr = addr; - flags = (flags &PAGE_VALID ) ?PGM_PROTECTION :PGM_ADDRESSING ; + flags = (flags &PAGE_VALID ) ?PGM_PROTECTION :PGM_PAGE_TRANS ;if (nonfault) {return flags; }
Signature · 1 line
2.31.1
PATCH v4 2/2 tests/tcg/s390x: Test SIGILL and SIGSEGV handling
In reply to Ilya LeoshkevichVerify that s390x-specific uc_mcontext.psw.addr is reported correctly.
--- tests/tcg/s390x/Makefile.target | 1 + tests/tcg/s390x/signal.c | 165 ++++++++++++++++++++++++++++++++ 2 files changed, 166 insertions(+) create mode 100644 tests/tcg/s390x/signal.c
tests/tcg/s390x/Makefile.target +1 -0
@@ -8,3 +8,4 @@ TESTS+=exrl-trtr TESTS+=pack TESTS+=mvo TESTS+=mvc +TESTS+=signal
tests/tcg/s390x/signal.c new file +165 -0
165 lines not on this page · raw message
Signature · 1 line
2.31.1
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series seems to have some coding style problems. See output below for more information:
Type: series
Message-id: [email protected]
Subject: [PATCH v4 0/2] target/s390x: Fix SIGILL psw.addr reporting
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
- [tag update] patchew/[email protected] -> patchew/[email protected] - [tag update] patchew/[email protected] -> patchew/[email protected] - [tag update] patchew/[email protected] -> patchew/[email protected] * [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
a51bd28 tests/tcg/s390x: Test SIGILL and SIGSEGV handling 78ea9f7 target/s390x: Fix SIGILL psw.addr reporting
=== OUTPUT BEGIN ===
1/2 Checking commit 78ea9f744a64 (target/s390x: Fix SIGILL psw.addr reporting) 2/2 Checking commit a51bd281a9b9 (tests/tcg/s390x: Test SIGILL and SIGSEGV handling)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #26:
new file mode 100644
ERROR: externs should be avoided in .c files
#44: FILE: tests/tcg/s390x/signal.c:14:
+void illegal_op(void);
ERROR: externs should be avoided in .c files
#45: FILE: tests/tcg/s390x/signal.c:15:
+void after_illegal_op(void);
ERROR: externs should be avoided in .c files
#51: FILE: tests/tcg/s390x/signal.c:21:
+void stg(void *dst, unsigned long src);
ERROR: externs should be avoided in .c files
#56: FILE: tests/tcg/s390x/signal.c:26:
+void mvc_8(void *dst, void *src);
total: 4 errors, 1 warnings, 169 lines checked
Patch 2/2 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]