usb: chipidea: host: fix port index underflow and UBSAN complains
Subsystems (2)
PATCH v3 1/1 usb: chipidea: host: fix port index underflow and UBSAN complains
If wIndex is 0 (and it often is), these calculations underflow and UBSAN complains, here resolve this by not decrementing the index when it is equal to 0, this copies the solution from commit 85e3990bea49 ("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN")
---
Change for v3:
- Correct the bug's reporter's user name format.
Change for v2:
- Add wIndex range check to ensure a correct port index value.
drivers/usb/chipidea/host.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/usb/chipidea/host.c +11 -3
@@ -240,15 +240,18 @@ static int ci_ehci_hub_control( ) {struct ehci_hcd *ehci =hcd_to_ehci (hcd); +unsigned int ports =HCS_N_PORTS (ehci->hcs_params);u32 __iomem *status_reg; -u32 temp; +u32 temp, port_index;unsigned long flags;int retval =0 ;bool done = false;struct device *dev = hcd->self.controller;struct ci_hdrc *ci =dev_get_drvdata (dev); - status_reg = &ehci->regs->port_status[(wIndex &0xff ) -1 ]; + port_index = wIndex &0xff ; + port_index -= (port_index >0 ); + status_reg = &ehci->regs->port_status[port_index];spin_lock_irqsave (&ehci->lock, flags);
@@ -260,6 +263,11 @@ static int ci_ehci_hub_control( }if (typeReq == SetPortFeature && wValue ==USB_PORT_FEAT_SUSPEND ) { +if (!wIndex || wIndex > ports) { + retval = -EPIPE ; + goto done; + } + temp =ehci_readl (ehci, status_reg);if ((temp &PORT_PE ) ==0 || (temp &PORT_RESET ) !=0 ) { retval = -EPIPE ;
@@ -288,7 +296,7 @@ static int ci_ehci_hub_control(ehci_writel (ehci, temp, status_reg); } -set_bit ((wIndex &0xff ) -1 , &ehci->suspended_ports); +set_bit (port_index, &ehci->suspended_ports); goto done; }
Signature · 1 line
2.25.1
Quoted 7 lines · Li Jun
If wIndex is 0 (and it often is), these calculations underflow and UBSAN complains, here resolve this by not decrementing the index when it is equal to 0, this copies the solution from commit
85e3990bea49("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN")Reported-by Zhipeng Wang <[email protected]>Signed-off-by Li Jun <[email protected]>
Applied, thanks.
Peter
Quoted 59 lines
---
Change for v3:
- Correct the bug's reporter's user name format.Change for v2:
(quoted diff) +0
-1- Add wIndex range check to ensure a correct port index value. drivers/usb/chipidea/host.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)drivers/usb/chipidea/host.c +11
-3@@ -240,15 +240,18 @@ static int ci_ehci_hub_control( ) {struct ehci_hcd *ehci =hcd_to_ehci (hcd); +unsigned int ports =HCS_N_PORTS (ehci->hcs_params);u32 __iomem *status_reg; -u32 temp; +u32 temp, port_index;unsigned long flags;int retval =0 ;bool done = false;struct device *dev = hcd->self.controller;struct ci_hdrc *ci =dev_get_drvdata (dev); - status_reg = &ehci->regs->port_status[(wIndex &0xff ) -1 ]; + port_index = wIndex &0xff ; + port_index -= (port_index >0 ); + status_reg = &ehci->regs->port_status[port_index];spin_lock_irqsave (&ehci->lock, flags);@@ -260,6 +263,11 @@ static int ci_ehci_hub_control( }if (typeReq == SetPortFeature && wValue ==USB_PORT_FEAT_SUSPEND ) { +if (!wIndex || wIndex > ports) { + retval = -EPIPE ; + goto done; + } + temp =ehci_readl (ehci, status_reg);if ((temp &PORT_PE ) ==0 || (temp &PORT_RESET ) !=0 ) { retval = -EPIPE ;@@ -288,7 +296,7 @@ static int ci_ehci_hub_control(ehci_writel (ehci, temp, status_reg); } -set_bit ((wIndex &0xff ) -1 , &ehci->suspended_ports); +set_bit (port_index, &ehci->suspended_ports); goto done; }Signature · 1 line
2.25.1
Signature · 2 lines
Thanks, Peter Chen