kasan: [v2]unpoison use memzero to init unaligned object
Subsystems (3)
PATCH 1/1 kasan: [v2]unpoison use memzero to init unaligned object
From: Yee Lee <[email protected]>
Follows the discussion: https://patchwork.kernel.org/project/linux-mediatek/list/?series=504439
This patch Add memzero_explict to initialize unaligned object.
Based on the integrateion of initialization in kasan_unpoison(). The hwtag instructions, constrained with its granularity, has to overwrite the data btyes in unaligned objects. This would cause issue when it works with SLUB debug redzoning.
In this patch, an additional initalizaing path is added for the unaligned objects. It contains memzero_explict() to clear out the data and disables its init flag for the following hwtag actions.
In lab test, this path is executed about 1.1%(941/80854) within the overall kasan_unpoison during a non-debug booting process.
Lab test: QEMU5.2 (+mte) / linux kernel 5.13-rc7
--- mm/kasan/kasan.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
mm/kasan/kasan.h +1 -1
@@ -389,7 +389,7 @@ static inline void kasan_unpoison(const void *addr, size_t size, bool init)return ;if (init && ((unsigned long )size &KASAN_GRANULE_MASK )) { init = false; -memset ((void *)addr,0 , size); +memzero_explicit ((void *)addr, size); } size =round_up (size,KASAN_GRANULE_SIZE );hw_set_mem_tag_range ((void *)addr, size, tag, init);
2.18.0
Quoted 4 lines · On Tue, 22 Jun 2021 at 10:48, <[email protected]> wrote:
From: Yee Lee <[email protected]>
Follows the discussion: https://patchwork.kernel.org/project/linux-mediatek/list/?series=504439
The info about the percentage of how frequent this is could have been provided as a simple reply to the discussion.
Quoted 1 line
This patch Add
memzero_explictto initialize unaligned object.
This patch does not apply to anything (I see it depends on the previous patch).
What you need to do is modify the original patch, and then send a [PATCH v2] (git helps with that by passing --reroll-count or -v) that applies cleanly to your base kernel tree.
The commit message will usually end with '---' and then briefly denote what changed since the last version.
https://www.kernel.org/doc/html/latest/process/submitting-patches.html#the-canonical-patch-format
Quoted 5 lines
Based on the integrateion of initialization in
kasan_unpoison(). The hwtag instructions, constrained with its granularity, has to overwrite the data btyes in unaligned objects. This would cause issue when it works with SLUB debug redzoning.In this patch, an additional initalizaing path is added for the unaligned objects. It contains
memzero_explict()to clear out the data and disables its init flag for the following hwtag actions.In lab test, this path is executed about 1.1%(941/80854) within the overall
kasan_unpoisonduring a non-debug booting process.
Nice, thanks for the data. If it is somehow doable, however, I'd still recommend to additionally guard the new code path by a check if debug-support was requested. Ideally with an IS_ENABLED() config check so that if it's a production kernel the branch is simply optimized out by the compiler.
Quoted 26 lines
Lab test: QEMU5.2 (+mte) / linux kernel 5.13-rc7
Signed-off-by Yee Lee <[email protected]>--- mm/kasan/kasan.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)mm/kasan/kasan.h +1
-1@@ -389,7 +389,7 @@ static inline void kasan_unpoison(const void *addr, size_t size, bool init)return ;if (init && ((unsigned long )size &KASAN_GRANULE_MASK )) { init = false; -memset ((void *)addr,0 , size); +memzero_explicit ((void *)addr, size); } size =round_up (size,KASAN_GRANULE_SIZE );hw_set_mem_tag_range ((void *)addr, size, tag, init);2.18.0
--
You received this message because you are subscribed to the Google Groups "kasan-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/kasan-dev/20210622084723.27637-1-yee.lee%40mediatek.com.
Quoted 15 lines · Marco Elver
Quoted 5 lines · On Tue, 22 Jun 2021 at 10:48, <[email protected]> wrote:
From: Yee Lee <[email protected]>
Follows the discussion:
https://patchwork.kernel.org/project/linux-mediatek/list/?series=504439The info about the percentage of how frequent this is could have been provided as a simple reply to the discussion.
Quoted 1 line
This patch Add
memzero_explictto initialize unaligned object.This patch does not apply to anything (I see it depends on the previous patch).
Quoted 8 lines
What you need to do is modify the original patch, and then send a [PATCH v2] (git helps with that by passing --reroll-count or -v) that applies cleanly to your base kernel tree.
The commit message will usually end with '---' and then briefly denote
what changed since the last version.
Got it.
Quoted 1 line
https://www.kernel.org/doc/html/latest/process/submitting-patches.html#the-canonical-patch-format
Quoted 13 lines
Quoted 6 lines
Based on the integrateion of initialization in
kasan_unpoison(). The hwtag instructions, constrained with its granularity, has to overwrite the data btyes in unaligned objects. This would cause issue when it works with SLUB debug redzoning.Quoted 6 lines
In this patch, an additional initalizaing path is added for the unaligned objects. It contains
memzero_explict()to clear out the data and disables its init flag for the following hwtag actions.In lab test, this path is executed about 1.1%(941/80854) within the overall
kasan_unpoisonduring a non-debug booting process.
Quoted 8 lines
Nice, thanks for the data. If it is somehow doable, however, I'd still
recommend to additionally guard the new code path by a check if debug-support was requested. Ideally with anIS_ENABLED()config check
so that if it's a production kernel the branch is simply optimized out
by the compiler.
Does it mean the memzero code path would be applied only at CONFIG_DEBUG_SLUB enabled? It expects no other potential overwriting in non-debug kernel.
By the way, based on de-coupling principle, adding a specific conditional statement(is_enable slub_debug) in a primitive funciton(kasan_unpoison) is not neat. It may be more proper that the conditional statement be added in other procedures of slub alloc.
Thanks,
BR,
Yee
Quoted 32 lines
Quoted 32 lines
Lab test: QEMU5.2 (+mte) / linux kernel 5.13-rc7
Signed-off-by Yee Lee <[email protected]>--- mm/kasan/kasan.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)mm/kasan/kasan.h +1
-1@@ -389,7 +389,7 @@ static inline void kasan_unpoison(const void *addr, size_t size, bool init)return ;if (init && ((unsigned long )size &KASAN_GRANULE_MASK )) { init = false; -memset ((void *)addr,0 , size); +memzero_explicit ((void *)addr, size); } size =round_up (size,KASAN_GRANULE_SIZE );hw_set_mem_tag_range((void *)addr, size, tag, init);2.18.0
--
You received this message because you are subscribed to the Google Groups "kasan-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit
https://groups.google.com/d/msgid/kasan-dev/20210622084723.27637-1-yee.lee%40mediatek.com
.
Quoted 51 lines · Yee Lee
Quoted 15 lines · Marco Elver
Quoted 5 lines · On Tue, 22 Jun 2021 at 10:48, <[email protected]> wrote:
From: Yee Lee <[email protected]>
Follows the discussion:
https://patchwork.kernel.org/project/linux-mediatek/list/?series=504439The info about the percentage of how frequent this is could have been provided as a simple reply to the discussion.
Quoted 1 line
This patch Add
memzero_explictto initialize unaligned object.This patch does not apply to anything (I see it depends on the previous patch).
Quoted 8 lines
What you need to do is modify the original patch, and then send a [PATCH v2] (git helps with that by passing --reroll-count or -v) that applies cleanly to your base kernel tree.
The commit message will usually end with '---' and then briefly denote
what changed since the last version.Got it.
Quoted 1 line
https://www.kernel.org/doc/html/latest/process/submitting-patches.html#the-canonical-patch-format
Quoted 13 lines
Quoted 6 lines
Based on the integrateion of initialization in
kasan_unpoison(). The hwtag instructions, constrained with its granularity, has to overwrite the data btyes in unaligned objects. This would cause issue when it works with SLUB debug redzoning.Quoted 6 lines
In this patch, an additional initalizaing path is added for the unaligned objects. It contains
memzero_explict()to clear out the data and disables its init flag for the following hwtag actions.In lab test, this path is executed about 1.1%(941/80854) within the overall
kasan_unpoisonduring a non-debug booting process.Quoted 8 lines
Nice, thanks for the data. If it is somehow doable, however, I'd still
recommend to additionally guard the new code path by a check if debug-support was requested. Ideally with anIS_ENABLED()config check
so that if it's a production kernel the branch is simply optimized out
by the compiler.
Quoted 3 lines
Does it mean the memzero code path would be applied only at
CONFIG_DEBUG_SLUBenabled? It expects no other potential overwriting in non-debug kernel.
Yes, if the problem only occurs with slub debugging enabled.
Quoted 4 lines
By the way, based on de-coupling principle, adding a specific conditional
statement(is_enable slub_debug)in a primitivefunciton(kasan_unpoison)is not neat. It may be more proper that the conditional statement be added in other procedures of slub alloc.
What do you have in mind?
Well, there is kmem_cache_debug_flags(). Perhaps there's a better place to add the check?
Quoted 42 lines
Thanks,
BR,
YeeQuoted 24 lines
Quoted 24 lines
Lab test: QEMU5.2 (+mte) / linux kernel 5.13-rc7
Signed-off-by Yee Lee <[email protected]>--- mm/kasan/kasan.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)mm/kasan/kasan.h +1
-1@@ -389,7 +389,7 @@ static inline void kasan_unpoison(const void *addr, size_t size, bool init)return ;if (init && ((unsigned long )size &KASAN_GRANULE_MASK )) { init = false; -memset ((void *)addr,0 , size); +memzero_explicit ((void *)addr, size); } size =round_up (size,KASAN_GRANULE_SIZE );hw_set_mem_tag_range((void *)addr, size, tag, init);2.18.0
Quoted 8 lines
Quoted 8 lines
--
You received this message because you are subscribed to the Google Groups "kasan-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit
https://groups.google.com/d/msgid/kasan-dev/20210622084723.27637-1-yee.lee%40mediatek.com
.--
You received this message because you are subscribed to the Google Groups "kasan-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/kasan-dev/46b1468146206e6cef0c33ecbfd86e02ea819db4.camel%40mediatek.com.