ARM: dts: at91: sama5d27_som1_ek: enable ADC node
Subsystems (2)
PATCH 1/1 ARM: dts: at91: sama5d27_som1_ek: enable ADC node
Enable the ADC for AN pins on Mikrobus1 and Mikrobus2 on the board. These correspond to channels AD6 and AD7 in the controller.
# cat /sys/bus/iio/devices/iio\:device0/in_voltage6_raw 240 # cat /sys/bus/iio/devices/iio\:device0/in_voltage7_raw 16380
Signed-off-by Eugen Hristev <[email protected]>
--- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +3 -1
@@ -224,8 +224,10 @@ i2c1: i2c@fc028000 { adc: adc@fc030000 { vddana-supply = <&vddana>; vref-supply = <&advref>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>; - status = "disabled"; + status = "okay"; }; pinctrl@fc038000 {
Signature · 1 line
2.25.1
Quoted 9 lines · Eugen Hristev
Enable the ADC for AN pins on Mikrobus1 and Mikrobus2 on the board. These correspond to channels AD6 and AD7 in the controller.
# cat /sys/bus/iio/devices/iio\:device0/in_voltage6_raw 240 # cat /sys/bus/iio/devices/iio\:device0/in_voltage7_raw 16380Signed-off-by Eugen Hristev <[email protected]>
Acked-by Nicolas Ferre <[email protected]>
Queued on at91-dt for 5.15. Best regards,
Nicolas
Quoted 21 lines
--- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +3
-1@@ -224,8 +224,10 @@ i2c1: i2c@fc028000 { adc: adc@fc030000 { vddana-supply = <&vddana>; vref-supply = <&advref>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>; - status = "disabled"; + status = "okay"; }; pinctrl@fc038000 {
Signature · 1 line
Nicolas Ferre