x86/sev: Minor updates for SEV guest support
Subsystems (3)
cover x86/sev: Minor updates for SEV guest support
From: Joerg Roedel <[email protected]>
Hi,
here are three small patches to update SEV-ES guest support in Linux. It would be great to have at least patch 3 merged for v5.14 to avoid future merge conflicts. It contains defines needed by KVM and X86 patches under development.
Thanks,
Joerg
Brijesh Singh (1):
x86/sev: Add defines for GHCB version 2 MSR protocol requests
Joerg Roedel (2):
x86/sev: Add Comments to existing GHCB MSR protocol defines x86/sev: Use "SEV: " prefix for messages from sev.c
arch/x86/include/asm/sev-common.h | 17 +++++++++++++++++ arch/x86/kernel/sev.c | 2 +- 2 files changed, 18 insertions(+), 1 deletion(-)
base-commit: be1a5408868af341f61f93c191b5e346ee88c82a
Signature · 1 line
2.31.1
PATCH 1/3 x86/sev: Add Comments to existing GHCB MSR protocol defines
From: Joerg Roedel <[email protected]>
Add comments to the defines for SEV Info and CPUID MSR protocol defines to document to which protocol part they belong.
--- arch/x86/include/asm/sev-common.h | 2 ++ 1 file changed, 2 insertions(+)
arch/x86/include/asm/sev-common.h +2 -0
@@ -11,6 +11,7 @@#define GHCB_MSR_INFO_POS 0#define GHCB_MSR_INFO_MASK (BIT_ULL(12) - 1) +/* SEV Information Request/Response */ #define GHCB_MSR_SEV_INFO_RESP 0x001#define GHCB_MSR_SEV_INFO_REQ 0x002#define GHCB_MSR_VER_MAX_POS 48
@@ -28,6 +29,7 @@#define GHCB_MSR_PROTO_MAX (v) (((v) >> GHCB_MSR_VER_MAX_POS) & GHCB_MSR_VER_MAX_MASK)#define GHCB_MSR_PROTO_MIN (v) (((v) >> GHCB_MSR_VER_MIN_POS) & GHCB_MSR_VER_MIN_MASK) +/* CPUID Request/Response */ #define GHCB_MSR_CPUID_REQ 0x004#define GHCB_MSR_CPUID_RESP 0x005#define GHCB_MSR_CPUID_FUNC_POS 32
Signature · 1 line
2.31.1
PATCH 2/3 x86/sev: Add defines for GHCB version 2 MSR protocol requests
In reply to Joerg RoedelFrom: Brijesh Singh <[email protected]>
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/response
This is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support, so they are submitted as an individual patch without users yet to avoid merge conflicts in the future.
--- arch/x86/include/asm/sev-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/x86/include/asm/sev-common.h +15 -0
@@ -47,6 +47,21 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS 12 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK GENMASK_ULL(51, 0) + +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081 +#define GHCB_MSR_HV_FT_POS 12 +#define GHCB_MSR_HV_FT_MASK GENMASK_ULL(51, 0) + +#define GHCB_MSR_HV_FT_RESP_VAL (v) \ + (((unsigned long)((v) & GHCB_MSR_HV_FT_MASK) >> GHCB_MSR_HV_FT_POS)) +#define GHCB_MSR_TERM_REQ 0x100#define GHCB_MSR_TERM_REASON_SET_POS 12#define GHCB_MSR_TERM_REASON_SET_MASK 0xf
Signature · 1 line
2.31.1
Re: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
Quoted 36 lines · Joerg Roedel
From: Brijesh Singh <[email protected]>
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/responseThis is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support, so they are submitted as an individual patch without users yet to avoid merge conflicts in the future.
Signed-off-by Brijesh Singh <[email protected]>Co-developed-by Tom Lendacky <[email protected]>Signed-off-by Tom Lendacky <[email protected]>Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/include/asm/sev-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)arch/x86/include/asm/sev-common.h +4
-0@@ -47,6 +47,21 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS 12
arch/x86/include/asm/sev-common.h line 63
Quoted 10 lines
arch/x86/include/asm/sev-common.h +10
-0+#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK GENMASK_ULL(51, 0) + +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081 +#define GHCB_MSR_HV_FT_POS 12 +#define GHCB_MSR_HV_FT_MASK GENMASK_ULL(51, 0) + +#define GHCB_MSR_HV_FT_RESP_VAL (v) \ + (((unsigned long)((v) & GHCB_MSR_HV_FT_MASK) >> GHCB_MSR_HV_FT_POS))
This should shift down first and then mask or else the mask should be from 12 to 63.
Thanks,
Tom
Quoted 5 lines
arch/x86/include/asm/sev-common.h +1
-0+#define GHCB_MSR_TERM_REQ 0x100#define GHCB_MSR_TERM_REASON_SET_POS 12#define GHCB_MSR_TERM_REASON_SET_MASK 0xf
Re: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
Quoted 42 lines · Tom Lendacky
Quoted 41 lines · Joerg Roedel
From: Brijesh Singh <[email protected]>
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/responseThis is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support, so they are submitted as an individual patch without users yet to avoid merge conflicts in the future.
Signed-off-by Brijesh Singh <[email protected]>Co-developed-by Tom Lendacky <[email protected]>Signed-off-by Tom Lendacky <[email protected]>Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/include/asm/sev-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)arch/x86/include/asm/sev-common.h +9
-0@@ -47,6 +47,21 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS 12 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK GENMASK_ULL(51, 0) + +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081
Quoted 9 lines
arch/x86/include/asm/sev-common.h line 63
Quoted 5 lines
arch/x86/include/asm/sev-common.h +5
-0+#define GHCB_MSR_HV_FT_POS 12 +#define GHCB_MSR_HV_FT_MASK GENMASK_ULL(51, 0) + +#define GHCB_MSR_HV_FT_RESP_VAL (v) \ + (((unsigned long)((v) & GHCB_MSR_HV_FT_MASK) >> GHCB_MSR_HV_FT_POS))This should shift down first and then mask or else the mask should be from 12 to 63.
Ah, that's good catch.
Joerg,
Please let me know if you want me to send the updated patch or you will take care in your next revision.
thanks
PATCH 2/3 x86/sev: Add defines for GHCB version 2 MSR protocol requests
In reply to Joerg RoedelFrom: Brijesh Singh <[email protected]>
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/response
This is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support, so they are submitted as an individual patch without users yet to avoid merge conflicts in the future.
--- arch/x86/include/asm/sev-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/x86/include/asm/sev-common.h +15 -0
@@ -47,6 +47,21 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS 12 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK GENMASK_ULL(51, 0) + +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081 +#define GHCB_MSR_HV_FT_POS 12 +#define GHCB_MSR_HV_FT_MASK GENMASK_ULL(51, 0) + +#define GHCB_MSR_HV_FT_RESP_VAL (v) \ + ((unsigned long)((v) >> GHCB_MSR_HV_FT_POS) & GHCB_MSR_HV_FT_MASK) +#define GHCB_MSR_TERM_REQ 0x100#define GHCB_MSR_TERM_REASON_SET_POS 12#define GHCB_MSR_TERM_REASON_SET_MASK 0xf
Signature · 1 line
2.31.1
Borislav Petkov
maintainerRe: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
Quoted 37 lines · Joerg Roedel
From: Brijesh Singh <[email protected]>
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/responseThis is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support, so they are submitted as an individual patch without users yet to avoid merge conflicts in the future.
Signed-off-by Brijesh Singh <[email protected]>Signed-off-by Tom Lendacky <[email protected]>Co-developed-by Tom Lendacky <[email protected]>Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/include/asm/sev-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)arch/x86/include/asm/sev-common.h +5
-0@@ -47,6 +47,21 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS 12 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK GENMASK_ULL(51, 0)
arch/x86/include/asm/sev-common.h line 64
Quoted 10 lines
arch/x86/include/asm/sev-common.h +10
-0+ +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081 +#define GHCB_MSR_HV_FT_POS 12 +#define GHCB_MSR_HV_FT_MASK GENMASK_ULL(51, 0) + +#define GHCB_MSR_HV_FT_RESP_VAL (v) \ + ((unsigned long)((v) >> GHCB_MSR_HV_FT_POS) & GHCB_MSR_HV_FT_MASK) +
Ok, so I took a critical look at this and it doesn't make sense to have a differently named define each time you need the [63:12] slice of GHCBData. So you can simply use GHCB_DATA(msr_value) instead, see below.
Complaints?
---
From: Brijesh Singh <[email protected]>
Date: Wed, 23 Jun 2021 08:40:00 +0200
Subject: [PATCH] x86/sev: Add defines for GHCB version 2 MSR protocol requests
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/response
This is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support.
[ bp: Fold in https://lkml.kernel.org/r/[email protected] too.
Simplify the brewing macro maze into readability. ]
--- arch/x86/include/asm/sev-common.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
arch/x86/include/asm/sev-common.h +15 -1
@@ -9,8 +9,13 @@#define __ASM_X86_SEV_COMMON_H#define GHCB_MSR_INFO_POS 0 -#define GHCB_MSR_INFO_MASK (BIT_ULL(12) - 1) +#define GHCB_DATA_LOW 12 +#define GHCB_MSR_INFO_MASK (BIT_ULL(GHCB_DATA_LOW) - 1) +#define GHCB_DATA (v) \ + (((unsigned long)(v) & ~GHCB_MSR_INFO_MASK) >> GHCB_DATA_LOW) + +/* SEV Information Request/Response */ #define GHCB_MSR_SEV_INFO_RESP 0x001#define GHCB_MSR_SEV_INFO_REQ 0x002#define GHCB_MSR_VER_MAX_POS 48
@@ -28,6 +33,7 @@#define GHCB_MSR_PROTO_MAX (v) (((v) >> GHCB_MSR_VER_MAX_POS) & GHCB_MSR_VER_MAX_MASK)#define GHCB_MSR_PROTO_MIN (v) (((v) >> GHCB_MSR_VER_MIN_POS) & GHCB_MSR_VER_MIN_MASK) +/* CPUID Request/Response */ #define GHCB_MSR_CPUID_REQ 0x004#define GHCB_MSR_CPUID_RESP 0x005#define GHCB_MSR_CPUID_FUNC_POS 32
@@ -45,6 +51,14 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 + +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081 +#define GHCB_MSR_TERM_REQ 0x100#define GHCB_MSR_TERM_REASON_SET_POS 12#define GHCB_MSR_TERM_REASON_SET_MASK 0xf
Signature · 7 lines
2.29.2
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteRe: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
Quoted 5 lines · Borislav Petkov
Ok, so I took a critical look at this and it doesn't make sense to have a differently named define each time you need the [63:12] slice of GHCBData. So you can simply use
GHCB_DATA(msr_value)instead, see below.Complaints?
Looks good to me.
Re: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
In reply to Borislav PetkovQuoted 52 lines · Borislav Petkov
Quoted 37 lines · Joerg Roedel
From: Brijesh Singh <[email protected]>
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/responseThis is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support, so they are submitted as an individual patch without users yet to avoid merge conflicts in the future.
Signed-off-by Brijesh Singh <[email protected]>Signed-off-by Tom Lendacky <[email protected]>Co-developed-by Tom Lendacky <[email protected]>Signed-off-by Joerg Roedel <[email protected]>--- arch/x86/include/asm/sev-common.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+)arch/x86/include/asm/sev-common.h +5
-0@@ -47,6 +47,21 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_POS 12 +#define GHCB_MSR_AP_RESET_HOLD_RESULT_MASK GENMASK_ULL(51, 0)arch/x86/include/asm/sev-common.h line 64
Quoted 10 lines
arch/x86/include/asm/sev-common.h +10
-0+ +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081 +#define GHCB_MSR_HV_FT_POS 12 +#define GHCB_MSR_HV_FT_MASK GENMASK_ULL(51, 0) + +#define GHCB_MSR_HV_FT_RESP_VAL (v) \ + ((unsigned long)((v) >> GHCB_MSR_HV_FT_POS) & GHCB_MSR_HV_FT_MASK) +Ok, so I took a critical look at this and it doesn't make sense to have a differently named define each time you need the [63:12] slice of GHCBData. So you can simply use
GHCB_DATA(msr_value)instead, see below.
Quoted 1 line
Complaints?
Looks good to me.
Re: [PATCH 2/3] x86/sev: Add defines for GHCB version 2 MSR protocol requests
In reply to Borislav PetkovQuoted 9 lines · Borislav Petkov
Quoted 2 lines · Joerg Roedel
From: Brijesh Singh <[email protected]>
Ok, so I took a critical look at this and it doesn't make sense to have a differently named define each time you need the [63:12] slice of GHCBData. So you can simply use
GHCB_DATA(msr_value)instead, see below.Complaints?
None from me.
Thanks,
Tom
[tip: x86/sev] x86/sev: Add defines for GHCB version 2 MSR protocol requests
In reply to Joerg RoedelThe following commit has been merged into the x86/sev branch of tip:
The following commit has been merged into the x86/sev branch of tip:
Commit-ID: 310f134ed41fcaa03eff302b1e69f1ce1ee21841 Gitweb: https://git.kernel.org/tip/310f134ed41fcaa03eff302b1e69f1ce1ee21841 Author: Brijesh Singh <[email protected]> AuthorDate: Wed, 23 Jun 2021 08:40:00 +02:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Wed, 23 Jun 2021 11:25:17 +02:00
x86/sev: Add defines for GHCB version 2 MSR protocol requests
Add the necessary defines for supporting the GHCB version 2 protocol. This includes defines for:
- MSR-based AP hlt request/response
- Hypervisor Feature request/response
This is the bare minimum of requests that need to be supported by a GHCB version 2 implementation. There are more requests in the specification, but those depend on Secure Nested Paging support being available.
These defines are shared between SEV host and guest support.
[ bp: Fold in https://lkml.kernel.org/r/[email protected] too.
Simplify the brewing macro maze into readability. ]
--- arch/x86/include/asm/sev-common.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
arch/x86/include/asm/sev-common.h +15 -1
@@ -9,8 +9,13 @@#define __ASM_X86_SEV_COMMON_H#define GHCB_MSR_INFO_POS 0 -#define GHCB_MSR_INFO_MASK (BIT_ULL(12) - 1) +#define GHCB_DATA_LOW 12 +#define GHCB_MSR_INFO_MASK (BIT_ULL(GHCB_DATA_LOW) - 1) +#define GHCB_DATA (v) \ + (((unsigned long)(v) & ~GHCB_MSR_INFO_MASK) >> GHCB_DATA_LOW) + +/* SEV Information Request/Response */ #define GHCB_MSR_SEV_INFO_RESP 0x001#define GHCB_MSR_SEV_INFO_REQ 0x002#define GHCB_MSR_VER_MAX_POS 48
@@ -28,6 +33,7 @@#define GHCB_MSR_PROTO_MAX (v) (((v) >> GHCB_MSR_VER_MAX_POS) & GHCB_MSR_VER_MAX_MASK)#define GHCB_MSR_PROTO_MIN (v) (((v) >> GHCB_MSR_VER_MIN_POS) & GHCB_MSR_VER_MIN_MASK) +/* CPUID Request/Response */ #define GHCB_MSR_CPUID_REQ 0x004#define GHCB_MSR_CPUID_RESP 0x005#define GHCB_MSR_CPUID_FUNC_POS 32
@@ -45,6 +51,14 @@ (((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \ (((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS)) +/* AP Reset Hold */ +#define GHCB_MSR_AP_RESET_HOLD_REQ 0x006 +#define GHCB_MSR_AP_RESET_HOLD_RESP 0x007 + +/* GHCB Hypervisor Feature Request/Response */ +#define GHCB_MSR_HV_FT_REQ 0x080 +#define GHCB_MSR_HV_FT_RESP 0x081 +#define GHCB_MSR_TERM_REQ 0x100#define GHCB_MSR_TERM_REASON_SET_POS 12#define GHCB_MSR_TERM_REASON_SET_MASK 0xf
PATCH 3/3 x86/sev: Use "SEV: " prefix for messages from sev.c
In reply to Joerg RoedelFrom: Joerg Roedel <[email protected]>
The source file has been renamed froms sev-es.c to sev.c, but the messages are still prefixed with "SEV-ES: ". Change that to "SEV: " to make it consistent.
--- arch/x86/kernel/sev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/sev.c +1 -1
@@ -7,7 +7,7 @@* Author: Joerg Roedel <[email protected]> */ -#define pr_fmt (fmt) "SEV-ES: " fmt +#define pr_fmt (fmt) "SEV: " fmt#include <linux/sched/debug.h> /* For show_regs() */ #include <linux/percpu-defs.h>
Signature · 1 line
2.31.1
[tip: x86/sev] x86/sev: Use "SEV: " prefix for messages from sev.c
The following commit has been merged into the x86/sev branch of tip:
The following commit has been merged into the x86/sev branch of tip:
Commit-ID: 8d9d46bbf3b6b7ff8edcac33603ab45c29e0e07f Gitweb: https://git.kernel.org/tip/8d9d46bbf3b6b7ff8edcac33603ab45c29e0e07f Author: Joerg Roedel <[email protected]> AuthorDate: Tue, 22 Jun 2021 16:48:25 +02:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Wed, 23 Jun 2021 11:56:18 +02:00
x86/sev: Use "SEV: " prefix for messages from sev.c
The source file has been renamed froms sev-es.c to sev.c, but the messages are still prefixed with "SEV-ES: ". Change that to "SEV: " to make it consistent.
--- arch/x86/kernel/sev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/sev.c +1 -1
@@ -7,7 +7,7 @@* Author: Joerg Roedel <[email protected]> */ -#define pr_fmt (fmt) "SEV-ES: " fmt +#define pr_fmt (fmt) "SEV: " fmt#include <linux/sched/debug.h> /* For show_regs() */ #include <linux/percpu-defs.h>