ast2600: spl: Fixes boot from RAM device
Subsystems (3)
PATCH 1/2 ast2600: spl: Fixes boot from RAM device
Reporting a BOOT_DEVICE_RAM can leverage common/spl/spl_ram.c to bring up u-boot.bin by memory offset 0x00010000.
--- arch/arm/mach-aspeed/ast2600/spl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-aspeed/ast2600/spl.c +1 -1
@@ -66,7 +66,7 @@ u32 spl_boot_device(void)case AST_BOOTMODE_EMMC :return BOOT_DEVICE_MMC1 ;case AST_BOOTMODE_SPI : -return BOOT_DEVICE_SPI ; +return BOOT_DEVICE_RAM ;case AST_BOOTMODE_UART :return BOOT_DEVICE_UART ; }
Signature · 1 line
2.17.1
Hi Troy, Joel, I am looking to use these patches to secure boot OpenBMC from flash on the AST2600 evaluation board. Is there a relevant UBOOT_MACHINE configuration file I can use? I am currently porting configuration for secure boot from the ast2600_openbmc_spl_emmc_defconfig to the ast2600_openbmc_spl_defconfig. I was only able to get the u-boot-spl to verify u-boot but kernel verification fails. Thanks, Sandhya ----- Original message -----
From: Troy Lee <[email protected]>
Sent by: "openbmc" <[email protected]>
To: <[email protected]>, <[email protected]>, <[email protected]>
Cc:
Subject: [EXTERNAL] [PATCH u-boot v2019.04-aspeed-openbmc v1 1/2] ast2600: spl: Fixes boot from RAM device
Date: Wed, Jun 23, 2021 2:08 AM
Reporting a BOOT_DEVICE_RAM can leverage common/spl/spl_ram.c
to bring up u-boot.bin by memory offset 0x00010000.
---
arch/arm/mach-aspeed/ast2600/spl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-aspeed/ast2600/spl.c +0 -0
@@ -66,7 +66,7 @@ u32 spl_boot_device(void)
case AST_BOOTMODE_EMMC:
return BOOT_DEVICE_MMC1;
case AST_BOOTMODE_SPI:
- return BOOT_DEVICE_SPI;
+ return BOOT_DEVICE_RAM;
case AST_BOOTMODE_UART:
return BOOT_DEVICE_UART;
}
--
2.17.1
Hi Sandhya,
The AST2600 hardware hash and crypto engine (HACE) can only exame data in DRAM, please make sure you copy the kernel fit-image into dram first.
Thanks,
Troy Lee
--
Yu-Ting Lee (Troy Lee) <[email protected]>
Quoted 47 lines · Sandhya Koteshwara
Hi Troy, Joel,
I am looking to use these patches to secure boot OpenBMC from flash on the AST2600 evaluation board. Is there a relevant
UBOOT_MACHINEconfiguration file I can use?I am currently porting configuration for secure boot from the
ast2600_openbmc_spl_emmc_defconfigto theast2600_openbmc_spl_defconfig. I was only able to get the u-boot-spl to verify u-boot but kernel verification fails.Thanks,
Sandhya----- Original message -----
From: Troy Lee <[email protected]>
Sent by: "openbmc" <[email protected]>
To: <[email protected]>, <[email protected]>, <[email protected]>
Cc:
Subject: [EXTERNAL] [PATCH u-boot v2019.04-aspeed-openbmc v1 1/2] ast2600: spl: Fixes boot from RAM device
Date: Wed, Jun 23, 2021 2:08 AMReporting a
BOOT_DEVICE_RAMcan leveragecommon/spl/spl_ram.cto bring up u-boot.bin by memory offset0x00010000.Fixes 13dd0b0f7273 ("ast2600: spl: Support common boot loader features")Signed-off-by Troy Lee <[email protected]>--- arch/arm/mach-aspeed/ast2600/spl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-aspeed/ast2600/spl.c +1
-2@@ -66,7 +66,7 @@ u32 spl_boot_device(void)case AST_BOOTMODE_EMMC :return BOOT_DEVICE_MMC1 ;case AST_BOOTMODE_SPI : -return BOOT_DEVICE_SPI ; +return BOOT_DEVICE_RAM ;case AST_BOOTMODE_UART :return BOOT_DEVICE_UART ; } --2.17.1
Thanks Troy. I got secure booting of the complete chain after copying to DRAM. Also for u-boot verification I had to add "u-boot,dm-pre-reloc;" to the ast2600-evb.dts file to enable the hace engine to be available before u-boot is relocated. Thanks, Sandhya ----- Original message -----
From: "Troy Lee" <[email protected]>
Sent by: "openbmc" <[email protected]>
To: "Sandhya Koteshwara" <[email protected]>
Cc: "OpenBMC Maillist" <[email protected]>, "Troy Lee" <[email protected]>
Subject: [EXTERNAL] Re: [PATCH u-boot v2019.04-aspeed-openbmc v1 1/2] ast2600: spl: Fixes boot from RAM device
Date: Mon, Jul 26, 2021 10:23 PM
Hi Sandhya,
The AST2600 hardware hash and crypto engine (HACE) can only exame data in DRAM, please make sure you copy the kernel fit-image into dram first.
Thanks,
Troy Lee
--
Yu-Ting Lee (Troy Lee) <[email protected]>
Quoted 47 lines · Sandhya Koteshwara
Hi Troy, Joel,
I am looking to use these patches to secure boot OpenBMC from flash on the AST2600 evaluation board. Is there a relevant
UBOOT_MACHINEconfiguration file I can use?I am currently porting configuration for secure boot from the
ast2600_openbmc_spl_emmc_defconfigto theast2600_openbmc_spl_defconfig. I was only able to get the u-boot-spl to verify u-boot but kernel verification fails.Thanks,
Sandhya----- Original message -----
From: Troy Lee <[email protected]>
Sent by: "openbmc" <[email protected]>
To: <[email protected]>, <[email protected]>, <[email protected]>
Cc:
Subject: [EXTERNAL] [PATCH u-boot v2019.04-aspeed-openbmc v1 1/2] ast2600: spl: Fixes boot from RAM device
Date: Wed, Jun 23, 2021 2:08 AMReporting a
BOOT_DEVICE_RAMcan leveragecommon/spl/spl_ram.cto bring up u-boot.bin by memory offset0x00010000.Fixes 13dd0b0f7273 ("ast2600: spl: Support common boot loader features")Signed-off-by Troy Lee <[email protected]>---
arch/arm/mach-aspeed/ast2600/spl.c | 2 +-1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-aspeed/ast2600/spl.c +0
-0@@ -66,7 +66,7 @@ u32 spl_boot_device(void)case
AST_BOOTMODE_EMMC:
returnBOOT_DEVICE_MMC1;
caseAST_BOOTMODE_SPI:
- returnBOOT_DEVICE_SPI;
+ returnBOOT_DEVICE_RAM;
caseAST_BOOTMODE_UART:
returnBOOT_DEVICE_UART;
}
--
2.17.1