ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warnings
PATCH 1/1 ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warnings
Fix following dtc warning by explicitly setting up #size-cells and #address-cells when overriding node in -u-boot.dtsi
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (reg_format):
/bus@100000/bus@28380000/mcu-navss/ringacc@2b800000:reg: property has invalid length (80 bytes) (#address-cells == 2, #size-cells == 1)
--- arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi +2 -0
@@ -43,6 +43,8 @@ mcu-navss{ u-boot,dm-spl; + #address-cells = <2>; + #size-cells = <2>; ringacc@2b800000 { reg = <0x0 0x2b800000 0x0 0x400000>,
Signature · 1 line
2.32.0
+Tom
Quoted 8 lines · Vignesh Raghavendra
Fix following dtc warning by explicitly setting up #size-cells and #address-cells when overriding node in
-u-boot.dtsi
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (reg_format):
/bus@100000/bus@28380000/mcu-navss/ringacc@2b800000:reg: property has invalid length (80 bytes) (#address-cells == 2, #size-cells == 1)Signed-off-by Vignesh Raghavendra <[email protected]>
Tom,
If you don't mind, can you pull the patch to next directly? This fixed the DT
warning on j7200 builds.
Thanks and regards,
Lokesh
Quoted 18 lines
--- arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi | 2 ++ 1 file changed, 2 insertions(+)arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi +2
-0@@ -43,6 +43,8 @@ mcu-navss{ u-boot,dm-spl; + #address-cells = <2>; + #size-cells = <2>; ringacc@2b800000 { reg = <0x0 0x2b800000 0x0 0x400000>,
Quoted 10 lines · Lokesh Vutla
+Tom
Quoted 7 lines · Vignesh Raghavendra
Fix following dtc warning by explicitly setting up #size-cells and #address-cells when overriding node in
-u-boot.dtsi
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (reg_format):
/bus@100000/bus@28380000/mcu-navss/ringacc@2b800000:reg: property has invalid length (80 bytes) (#address-cells == 2, #size-cells == 1)
Quoted 5 lines
Quoted 1 line
Signed-off-by Vignesh Raghavendra <[email protected]>Tom,
If you don't mind, can you pull the patch to next directly? This fixed the DT
warning on j7200 builds.
OK, will do.
Signature · 1 line
Tom
Quoted 8 lines · Vignesh Raghavendra
Fix following dtc warning by explicitly setting up #size-cells and #address-cells when overriding node in
-u-boot.dtsi
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (reg_format):
/bus@100000/bus@28380000/mcu-navss/ringacc@2b800000:reg: property has invalid length (80 bytes) (#address-cells == 2, #size-cells == 1)Signed-off-by Vignesh Raghavendra <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom