bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean
Subsystems (2)
PATCH 1/1 bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean
Devices such as SDX24 do not have the provision for inband wake doorbell in the form of channel 127 and instead have a sideband GPIO for it. Newer devices such as SDX55 or SDX65 support inband wake method by default. Ensure the functionality is used based on this such that device wake stays held when a client driver uses mhi_device_get() API or the equivalent debugfs entry.
--- drivers/bus/mhi/pci_generic.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-)
drivers/bus/mhi/pci_generic.c +19 -8
@@ -32,6 +32,8 @@* @edl: emergency download mode firmware path (if any) * @bar_num: PCI base address register to use for MHI MMIO register space * @dma_data_width: DMA transfer word size (32 or 64 bits) +* @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead +* of inband wake support (such as sdx24) */ struct mhi_pci_dev_info {const struct mhi_controller_config *config;
@@ -40,6 +42,7 @@ struct mhi_pci_dev_info {const char *edl;unsigned int bar_num;unsigned int dma_data_width; +bool sideband_wake; };#define MHI_CHANNEL_CONFIG_UL (ch_num, ch_name, el_count, ev_ring) \
@@ -242,7 +245,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = { .edl = "qcom/sdx65m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, };static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
@@ -251,7 +255,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { .edl = "qcom/sdx55m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, };static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
@@ -259,7 +264,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = true, };static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
@@ -301,7 +307,8 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = { .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_quectel_em1xx_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = true, };static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
@@ -339,7 +346,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = { .edl = "qcom/sdx55m/edl.mbn", .config = &modem_foxconn_sdx55_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, };static const struct pci_device_id mhi_pci_id_table[] = {
@@ -640,9 +648,12 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) mhi_cntrl->status_cb = mhi_pci_status_cb; mhi_cntrl->runtime_get = mhi_pci_runtime_get; mhi_cntrl->runtime_put = mhi_pci_runtime_put; - mhi_cntrl->wake_get = mhi_pci_wake_get_nop; - mhi_cntrl->wake_put = mhi_pci_wake_put_nop; - mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; + +if (info->sideband_wake) { + mhi_cntrl->wake_get = mhi_pci_wake_get_nop; + mhi_cntrl->wake_put = mhi_pci_wake_put_nop; + mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; + } err =mhi_pci_claim (mhi_cntrl, info->bar_num,DMA_BIT_MASK (info->dma_data_width));if (err)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 11 lines · Bhaumik Bhatt
Devices such as SDX24 do not have the provision for inband wake doorbell in the form of channel 127 and instead have a sideband GPIO for it. Newer devices such as SDX55 or SDX65 support inband wake method by default. Ensure the functionality is used based on this such that device wake stays held when a client driver uses
mhi_device_get()API or the equivalent debugfs entry.Fixes e3e5e6508fc1 ("bus: mhi: pci_generic: No-Op for device_wake operations")Signed-off-by Bhaumik Bhatt <[email protected]>Reviewed-by Manivannan Sadhasivam <[email protected]>
Removed "Link" and applied to mhi-next!
Thanks,
Mani
Quoted 95 lines
--- drivers/bus/mhi/pci_generic.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-)drivers/bus/mhi/pci_generic.c +19
-8@@ -32,6 +32,8 @@* @edl: emergency download mode firmware path (if any) * @bar_num: PCI base address register to use for MHI MMIO register space * @dma_data_width: DMA transfer word size (32 or 64 bits) +* @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead +* of inband wake support (such as sdx24) */ struct mhi_pci_dev_info {const struct mhi_controller_config *config;@@ -40,6 +42,7 @@ struct mhi_pci_dev_info {const char *edl;unsigned int bar_num;unsigned int dma_data_width; +bool sideband_wake; };#define MHI_CHANNEL_CONFIG_UL (ch_num, ch_name, el_count, ev_ring) \@@ -242,7 +245,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = { .edl = "qcom/sdx65m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, };static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {@@ -251,7 +255,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { .edl = "qcom/sdx55m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, };static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {@@ -259,7 +264,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = true, };static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {@@ -301,7 +307,8 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = { .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_quectel_em1xx_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = true, };static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {@@ -339,7 +346,8 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = { .edl = "qcom/sdx55m/edl.mbn", .config = &modem_foxconn_sdx55_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .sideband_wake = false, };static const struct pci_device_id mhi_pci_id_table[] = {@@ -640,9 +648,12 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) mhi_cntrl->status_cb = mhi_pci_status_cb; mhi_cntrl->runtime_get = mhi_pci_runtime_get; mhi_cntrl->runtime_put = mhi_pci_runtime_put; - mhi_cntrl->wake_get = mhi_pci_wake_get_nop; - mhi_cntrl->wake_put = mhi_pci_wake_put_nop; - mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; + +if (info->sideband_wake) { + mhi_cntrl->wake_get = mhi_pci_wake_get_nop; + mhi_cntrl->wake_put = mhi_pci_wake_put_nop; + mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; + } err =mhi_pci_claim (mhi_cntrl, info->bar_num,DMA_BIT_MASK (info->dma_data_width));if (err)Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project