igc: Add support for RX Flex Filters
Subsystems (2)
v2 cover igc: Add support for RX Flex Filters
Hi,
Changes from v1:
- Fixed warnings related to invalid endianness conversions (Tony Nguyen);
- Added some examples for using the exposed LEDs (Paul Menzel);
Add support for steering traffic to specific RX queues using Flex Filters.
As the name implies, Flex Filters are more flexible than using Layer-2, VLAN or MAC address filters, one of the reasons is that they allow "AND" operations more easily, e.g. when the user wants to steer some traffic based on the source MAC address and the packet ethertype.
Future work include adding support for offloading tc-u32 filters to the hardware.
The series is divided as follows:
Patch 1/5, add the low level primitives for configuring Flex filters.
Patch 2/5 and 3/5, allow ethtool to manage Flex filters.
Patch 4/5, when specifying filters that have multiple predicates, use Flex filters.
Patch 5/5, Adds support for exposing the i225 LEDs using the LED subsystem.
Cheers,
Kurt Kanzenbach (4):
igc: Add possibility to add flex filter
igc: Integrate flex filter into ethtool ops
igc: Make flex filter more flexible
igc: Export LEDs
Vinicius Costa Gomes (1):
igc: Allow for Flex Filters to be installed
drivers/net/ethernet/intel/Kconfig | 1 + drivers/net/ethernet/intel/igc/igc.h | 48 +- drivers/net/ethernet/intel/igc/igc_defines.h | 62 ++- drivers/net/ethernet/intel/igc/igc_ethtool.c | 41 +- drivers/net/ethernet/intel/igc/igc_main.c | 448 ++++++++++++++++++- drivers/net/ethernet/intel/igc/igc_regs.h | 19 + 6 files changed, 595 insertions(+), 24 deletions(-)
Signature · 1 line
2.32.0
PATCH v2 1/5 igc: Add possibility to add flex filter
From: Kurt Kanzenbach <[email protected]>
The Intel i225 NIC has the possibility to add flex filters which can match up to the first 128 byte of a packet. These filters are useful for all kind of packet matching. One particular use case is Profinet, as the different traffic classes are distinguished by the frame id range which cannot be matched by any other means.
Add code to configure and enable flex filters.
--- drivers/net/ethernet/intel/igc/igc.h | 13 ++ drivers/net/ethernet/intel/igc/igc_defines.h | 48 ++++++- drivers/net/ethernet/intel/igc/igc_main.c | 134 +++++++++++++++++++ drivers/net/ethernet/intel/igc/igc_regs.h | 17 +++ 4 files changed, 207 insertions(+), 5 deletions(-)
drivers/net/ethernet/intel/igc/igc.h +13 -0
@@ -33,6 +33,8 @@ void igc_ethtool_set_ops(struct net_device *);#define IGC_N_PEROUT 2#define IGC_N_SDP 4 +#define MAX_FLEX_FILTER 32 +enum igc_mac_filter_type {IGC_MAC_FILTER_TYPE_DST =0 ,IGC_MAC_FILTER_TYPE_SRC
@@ -502,6 +504,17 @@ struct igc_nfc_rule {*/ #define IGC_MAX_RXNFC_RULES 32 +struct igc_flex_filter { +u8 index; +u8 data[128 ]; +u8 mask[16 ]; +u8 length; +u8 rx_queue; +u8 prio; +u8 immediate_irq; +u8 drop; +}; +/* igc_desc_unused - calculate if we have unused descriptors */ static inline u16 igc_desc_unused (const struct igc_ring *ring) {
drivers/net/ethernet/intel/igc/igc_defines.h +43 -5
60 lines not on this page · raw message
drivers/net/ethernet/intel/igc/igc_main.c +134 -0
140 lines not on this page · raw message
drivers/net/ethernet/intel/igc/igc_regs.h +17 -0
@@ -67,6 +67,9 @@/* Filtering Registers */ #define IGC_ETQF (_n) (0x05CB0 + (4 * (_n)))/* EType Queue Fltr */ +#define IGC_FHFT (_n) (0x09000 + (256 * (_n)))/* Flexible Host Filter */ +#define IGC_FHFT_EXT (_n) (0x09A00 + (256 * (_n)))/* Flexible Host Filter Extended */ +#define IGC_FHFTSL 0x05804/* Flex Filter indirect table select */ /* ETQF register bit definitions */ #define IGC_ETQF_FILTER_ENABLE BIT(26)
@@ -75,6 +78,19 @@#define IGC_ETQF_QUEUE_MASK 0x00070000#define IGC_ETQF_ETYPE_MASK 0x0000FFFF +/* FHFT register bit definitions */ +#define IGC_FHFT_LENGTH_MASK GENMASK(7, 0) +#define IGC_FHFT_QUEUE_SHIFT 8 +#define IGC_FHFT_QUEUE_MASK GENMASK(10, 8) +#define IGC_FHFT_PRIO_SHIFT 16 +#define IGC_FHFT_PRIO_MASK GENMASK(18, 16) +#define IGC_FHFT_IMM_INT BIT(24) +#define IGC_FHFT_DROP BIT(25) + +/* FHFTSL register bit definitions */ +#define IGC_FHFTSL_FTSL_SHIFT 0 +#define IGC_FHFTSL_FTSL_MASK GENMASK(1, 0) +/* Redirection Table - RW Array */ #define IGC_RETA (_i) (0x05C00 + ((_i) * 4))/* RSS Random Key - RW Array */
@@ -240,6 +256,7 @@#define IGC_WUFC 0x05808/* Wakeup Filter Control - RW */ #define IGC_WUS 0x05810/* Wakeup Status - R/W1C */ #define IGC_WUPL 0x05900/* Wakeup Packet Length - RW */ +#define IGC_WUFC_EXT 0x0580C/* Wakeup Filter Control Register Extended - RW */ /* Wake Up packet memory */ #define IGC_WUPM_REG (_i) (0x05A00 + ((_i) * 4))
Signature · 1 line
2.32.0
Fuxbrumer
PATCH v2 1/5 igc: Add possibility to add flex filter
Quoted 13 lines · Vinicius Costa Gomes
From: Kurt Kanzenbach <[email protected]>
The Intel i225 NIC has the possibility to add flex filters which can match up to the first 128 byte of a packet. These filters are useful for all kind of packet matching. One particular use case is Profinet, as the different traffic classes are distinguished by the frame id range which cannot be matched by any other means.
Add code to configure and enable flex filters.
Signed-off-by Kurt Kanzenbach <[email protected]>Reviewed-by Sebastian Andrzej Siewior <[email protected]>Signed-off-by Vinicius Costa Gomes <[email protected]>
Quoted 7 lines
--- drivers/net/ethernet/intel/igc/igc.h | 13 ++ drivers/net/ethernet/intel/igc/igc_defines.h | 48 ++++++- drivers/net/ethernet/intel/igc/igc_main.c | 134 +++++++++++++++++++ drivers/net/ethernet/intel/igc/igc_regs.h | 17 +++ 4 files changed, 207 insertions(+), 5 deletions(-)
PATCH v2 2/5 igc: Integrate flex filter into ethtool ops
In reply to Vinicius Costa GomesFrom: Kurt Kanzenbach <[email protected]>
Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan.
The matching pattern looks like this:
* dest_mac [6]
* src_mac [6]
* tpid [2]
* vlan tci [2]
* ether type [2]
* user data [8]
This can be used to match Profinet traffic classes by FrameID range.
--- drivers/net/ethernet/intel/igc/igc.h | 24 ++- drivers/net/ethernet/intel/igc/igc_defines.h | 4 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 20 ++ drivers/net/ethernet/intel/igc/igc_main.c | 190 ++++++++++++++++++- 4 files changed, 228 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/igc/igc.h +17 -7
@@ -478,18 +478,28 @@ struct igc_q_vector { };enum igc_filter_match_flags { -IGC_FILTER_FLAG_ETHER_TYPE =0x1 , -IGC_FILTER_FLAG_VLAN_TCI =0x2 , -IGC_FILTER_FLAG_SRC_MAC_ADDR =0x4 , -IGC_FILTER_FLAG_DST_MAC_ADDR =0x8 , +IGC_FILTER_FLAG_ETHER_TYPE =BIT (0 ), +IGC_FILTER_FLAG_VLAN_TCI =BIT (1 ), +IGC_FILTER_FLAG_SRC_MAC_ADDR =BIT (2 ), +IGC_FILTER_FLAG_DST_MAC_ADDR =BIT (3 ), +IGC_FILTER_FLAG_USER_DATA =BIT (4 ), +IGC_FILTER_FLAG_VLAN_ETYPE =BIT (5 ), };struct igc_nfc_filter {u8 match_flags;u16 etype; +__be16 vlan_etype;u16 vlan_tci;u8 src_addr[ETH_ALEN ];u8 dst_addr[ETH_ALEN ]; +u8 user_data[8 ]; +u8 user_mask[8 ]; +u8 flex_index; +u8 rx_queue; +u8 prio; +u8 immediate_irq; +u8 drop; };struct igc_nfc_rule {
@@ -499,10 +509,10 @@ struct igc_nfc_rule {u16 action; }; -/* IGC supports a total of 32 NFC rules: 16 MAC address based,, 8 VLAN priority -* based, and 8 ethertype based. +/* IGC supports a total of 32 NFC rules: 16 MAC address based, 8 VLAN priority +* based, 8 ethertype based and 32 Flex filter based rules. */ -#define IGC_MAX_RXNFC_RULES 32 +#define IGC_MAX_RXNFC_RULES 64struct igc_flex_filter {u8 index;
drivers/net/ethernet/intel/igc/igc_defines.h +4 -0
@@ -32,6 +32,8 @@#define IGC_WUFC_FLX6 BIT(22)/* Flexible Filter 6 Enable */ #define IGC_WUFC_FLX7 BIT(23)/* Flexible Filter 7 Enable */ +#define IGC_WUFC_FILTER_MASK GENMASK(23, 14) +#define IGC_CTRL_ADVD3WUC 0x00100000/* D3 WUC */ /* Wake Up Status */
@@ -81,6 +83,8 @@#define IGC_WUFC_EXT_FLX30 BIT(30)/* Flexible Filter 30 Enable */ #define IGC_WUFC_EXT_FLX31 BIT(31)/* Flexible Filter 31 Enable */ +#define IGC_WUFC_EXT_FILTER_MASK GENMASK(31, 8) +/* Physical Func Reset Done Indication */ #define IGC_CTRL_EXT_LINK_MODE_MASK 0x00C00000
drivers/net/ethernet/intel/igc/igc_ethtool.c +20 -0
@@ -979,6 +979,12 @@ static int igc_ethtool_get_nfc_rule(struct igc_adapter *adapter,eth_broadcast_addr (fsp->m_u.ether_spec.h_source); } +if (rule->filter.match_flags &IGC_FILTER_FLAG_USER_DATA ) { + fsp->flow_type |=FLOW_EXT ; +memcpy (fsp->h_ext.data, rule->filter.user_data,sizeof (fsp->h_ext.data)); +memcpy (fsp->m_ext.data, rule->filter.user_mask,sizeof (fsp->m_ext.data)); + } +mutex_unlock (&adapter->nfc_rule_lock);return 0 ;
@@ -1215,6 +1221,20 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule,ether_addr_copy (rule->filter.dst_addr, fsp->h_u.ether_spec.h_dest); } + +/* Check for user defined data */ +if ((fsp->flow_type &FLOW_EXT ) && + (fsp->h_ext.data[0 ] || fsp->h_ext.data[1 ])) { + rule->filter.match_flags |=IGC_FILTER_FLAG_USER_DATA ; +memcpy (rule->filter.user_data, fsp->h_ext.data,sizeof (fsp->h_ext.data)); +memcpy (rule->filter.user_mask, fsp->m_ext.data,sizeof (fsp->m_ext.data)); + +/* VLAN etype matching is only valid using flex filter */ +if ((fsp->flow_type &FLOW_EXT ) && fsp->h_ext.vlan_etype) { + rule->filter.vlan_etype = fsp->h_ext.vlan_etype; + rule->filter.match_flags |=IGC_FILTER_FLAG_VLAN_ETYPE ; + } + } }/**
drivers/net/ethernet/intel/igc/igc_main.c +187 -3
212 lines not on this page · raw message
Signature · 1 line
2.32.0
Fuxbrumer
PATCH v2 2/5 igc: Integrate flex filter into ethtool ops
Quoted 18 lines · Vinicius Costa Gomes
From: Kurt Kanzenbach <[email protected]>
Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan.
The matching pattern looks like this:
*
dest_mac[6]
*src_mac[6]
* tpid [2]
* vlan tci [2]
* ether type [2]
* user data [8]This can be used to match Profinet traffic classes by FrameID range.
Quoted 9 lines
Signed-off-by Kurt Kanzenbach <[email protected]>Reviewed-by Sebastian Andrzej Siewior <[email protected]>--- drivers/net/ethernet/intel/igc/igc.h | 24 ++- drivers/net/ethernet/intel/igc/igc_defines.h | 4 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 20 ++ drivers/net/ethernet/intel/igc/igc_main.c | 190 ++++++++++++++++++- 4 files changed, 228 insertions(+), 10 deletions(-)
PATCH v2 3/5 igc: Allow for Flex Filters to be installed
In reply to Vinicius Costa GomesAllows Flex Filters to be installed.
The previous restriction to the types of filters that can be installed can now be lifted.
--- drivers/net/ethernet/intel/igc/igc_ethtool.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/net/ethernet/intel/igc/igc_ethtool.c +0 -6
@@ -1300,12 +1300,6 @@ static int igc_ethtool_add_nfc_rule(struct igc_adapter *adapter,return -EOPNOTSUPP ; } -if ((fsp->flow_type &FLOW_EXT ) && - fsp->m_ext.vlan_tci !=htons (VLAN_PRIO_MASK )) { -netdev_dbg (netdev,"VLAN mask not supported\n" ); -return -EOPNOTSUPP ; - } -if (fsp->ring_cookie >= adapter->num_rx_queues) {netdev_dbg (netdev,"Invalid action\n" );return -EINVAL ;
Signature · 1 line
2.32.0
Fuxbrumer
PATCH v2 3/5 igc: Allow for Flex Filters to be installed
Quoted 10 lines · Vinicius Costa Gomes
Allows Flex Filters to be installed.
The previous restriction to the types of filters that can be installed can now be lifted.
Signed-off-by Vinicius Costa Gomes <[email protected]>--- drivers/net/ethernet/intel/igc/igc_ethtool.c | 6 ------ 1 file changed, 6 deletions(-)
PATCH v2 4/5 igc: Make flex filter more flexible
In reply to Vinicius Costa GomesFrom: Kurt Kanzenbach <[email protected]>
Currently flex filters are only used for filters containing user data. However, it makes sense to utilize them also for filters having multiple conditions, because that's not supported by the driver at the moment. Add it.
--- drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 27 ++++++++++++-------- drivers/net/ethernet/intel/igc/igc_main.c | 14 ++++------ 3 files changed, 22 insertions(+), 20 deletions(-)
drivers/net/ethernet/intel/igc/igc.h +1 -0
@@ -507,6 +507,7 @@ struct igc_nfc_rule {struct igc_nfc_filter filter;u32 location;u16 action; +bool flex; };/* IGC supports a total of 32 NFC rules: 16 MAC address based, 8 VLAN priority
drivers/net/ethernet/intel/igc/igc_ethtool.c +16 -11
@@ -1222,19 +1222,29 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule, fsp->h_u.ether_spec.h_dest); } +/* VLAN etype matching */ +if ((fsp->flow_type &FLOW_EXT ) && fsp->h_ext.vlan_etype) { + rule->filter.vlan_etype = fsp->h_ext.vlan_etype; + rule->filter.match_flags |=IGC_FILTER_FLAG_VLAN_ETYPE ; + } +/* Check for user defined data */ if ((fsp->flow_type &FLOW_EXT ) && (fsp->h_ext.data[0 ] || fsp->h_ext.data[1 ])) { rule->filter.match_flags |=IGC_FILTER_FLAG_USER_DATA ;memcpy (rule->filter.user_data, fsp->h_ext.data,sizeof (fsp->h_ext.data));memcpy (rule->filter.user_mask, fsp->m_ext.data,sizeof (fsp->m_ext.data)); - -/* VLAN etype matching is only valid using flex filter */ -if ((fsp->flow_type &FLOW_EXT ) && fsp->h_ext.vlan_etype) { - rule->filter.vlan_etype = fsp->h_ext.vlan_etype; - rule->filter.match_flags |=IGC_FILTER_FLAG_VLAN_ETYPE ; - } } + +/* When multiple filter options or user data or vlan etype is set, use a +* flex filter. +*/ +if ((rule->filter.match_flags &IGC_FILTER_FLAG_USER_DATA ) || + (rule->filter.match_flags &IGC_FILTER_FLAG_VLAN_ETYPE ) || + (rule->filter.match_flags & (rule->filter.match_flags -1 ))) + rule->flex = true; +else + rule->flex = false; }/**
@@ -1264,11 +1274,6 @@ static int igc_ethtool_check_nfc_rule(struct igc_adapter *adapter,return -EINVAL ; } -if (flags & (flags -1 )) { -netdev_dbg (dev,"Rule with multiple matches not supported\n" ); -return -EOPNOTSUPP ; - } -list_for_each_entry (tmp, &adapter->nfc_rule_list, list) { if (!memcmp(&rule->filter, &tmp->filter, sizeof(rule->filter)) &&
drivers/net/ethernet/intel/igc/igc_main.c +5 -9
@@ -3389,14 +3389,8 @@ static int igc_enable_nfc_rule(struct igc_adapter *adapter, {int err; -/* Check for user data first: When user data is set, the only option is -* to use a flex filter. When more options are set (ethertype, vlan tci, -* ...) construct a flex filter matching all of that. -*/ -if (rule->filter.match_flags &IGC_FILTER_FLAG_USER_DATA ) { - err =igc_add_flex_filter (adapter, rule); -if (err) -return err; +if (rule->flex) { +return igc_add_flex_filter (adapter, rule); }if (rule->filter.match_flags &IGC_FILTER_FLAG_ETHER_TYPE ) {
@@ -3435,8 +3429,10 @@ static int igc_enable_nfc_rule(struct igc_adapter *adapter,static void igc_disable_nfc_rule (struct igc_adapter *adapter,const struct igc_nfc_rule *rule) { -if (rule->filter.match_flags &IGC_FILTER_FLAG_USER_DATA ) +if (rule->flex) {igc_del_flex_filter (adapter, rule->filter.flex_index); +return ; + }if (rule->filter.match_flags &IGC_FILTER_FLAG_ETHER_TYPE )igc_del_etype_filter (adapter, rule->filter.etype);
Signature · 1 line
2.32.0
Fuxbrumer
PATCH v2 4/5 igc: Make flex filter more flexible
Quoted 7 lines · Vinicius Costa Gomes
From: Kurt Kanzenbach <[email protected]>
Currently flex filters are only used for filters containing user data. However, it makes sense to utilize them also for filters having multiple conditions, because that's not supported by the driver at the moment. Add it.
Quoted 9 lines
Signed-off-by Kurt Kanzenbach <[email protected]>Reviewed-by Sebastian Andrzej Siewior <[email protected]>Signed-off-by Vinicius Costa Gomes <[email protected]>--- drivers/net/ethernet/intel/igc/igc.h | 1 + drivers/net/ethernet/intel/igc/igc_ethtool.c | 27 ++++++++++++-------- drivers/net/ethernet/intel/igc/igc_main.c | 14 ++++------ 3 files changed, 22 insertions(+), 20 deletions(-)
PATCH v2 5/5 igc: Export LEDs
In reply to Vinicius Costa GomesFrom: Kurt Kanzenbach <[email protected]>
Each i225 has three LEDs. Export them via the LED class framework.
Each LED is controllable via sysfs. Example:
$ cd /sys/class/leds/igc_led0 $ cat brightness # Current Mode $ cat max_brightness # 15 $ echo 0 > brightness # Mode 0 $ echo 1 > brightness # Mode 1
The brightness field here reflects the different LED modes ranging from 0 to 15.
--- drivers/net/ethernet/intel/Kconfig | 1 + drivers/net/ethernet/intel/igc/igc.h | 10 ++ drivers/net/ethernet/intel/igc/igc_defines.h | 10 ++ drivers/net/ethernet/intel/igc/igc_main.c | 132 +++++++++++++++++++ drivers/net/ethernet/intel/igc/igc_regs.h | 2 + 5 files changed, 155 insertions(+)
drivers/net/ethernet/intel/Kconfig +1 -0
@@ -349,6 +349,7 @@ config IGC tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" default n depends on PCI + depends on LEDS_CLASS help This driver supports Intel(R) Ethernet Controller I225-LM/I225-V family of adapters.
drivers/net/ethernet/intel/igc/igc.h +10 -0
@@ -13,6 +13,7 @@#include <linux/ptp_clock_kernel.h> #include <linux/timecounter.h> #include <linux/net_tstamp.h> +#include <linux/leds.h> #include "igc_hw.h"
@@ -239,8 +240,17 @@ struct igc_adapter {struct timespec64 start;struct timespec64 period; } perout[IGC_N_PEROUT ]; + +/* LEDs */ +struct mutex led_mutex; +struct led_classdev led0; +struct led_classdev led1; +struct led_classdev led2; }; +#define led_to_igc (ldev, led) \ + container_of(ldev, struct igc_adapter, led) +void igc_up (struct igc_adapter *adapter);void igc_down (struct igc_adapter *adapter);int igc_open (struct net_device *netdev);
drivers/net/ethernet/intel/igc/igc_defines.h +10 -0
@@ -144,6 +144,16 @@#define IGC_CTRL_SDP0_DIR 0x00400000/* SDP0 Data direction */ #define IGC_CTRL_SDP1_DIR 0x00800000/* SDP1 Data direction */ +/* LED Control */ +#define IGC_LEDCTL_LED0_MODE_SHIFT 0 +#define IGC_LEDCTL_LED0_MODE_MASK GENMASK(3, 0) +#define IGC_LEDCTL_LED1_MODE_SHIFT 8 +#define IGC_LEDCTL_LED1_MODE_MASK GENMASK(11, 8) +#define IGC_LEDCTL_LED2_MODE_SHIFT 16 +#define IGC_LEDCTL_LED2_MODE_MASK GENMASK(19, 16) + +#define IGC_CONNSW_AUTOSENSE_EN 0x1 +/* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */ #define MAX_JUMBO_FRAME_SIZE 0x2600
drivers/net/ethernet/intel/igc/igc_main.c +132 -0
150 lines not on this page · raw message
drivers/net/ethernet/intel/igc/igc_regs.h +2 -0
@@ -10,6 +10,8 @@#define IGC_EECD 0x00010/* EEPROM/Flash Control - RW */ #define IGC_CTRL_EXT 0x00018/* Extended Device Control - RW */ #define IGC_MDIC 0x00020/* MDI Control - RW */ +#define IGC_LEDCTL 0x00E00/* LED Control - RW */ +#define IGC_MDICNFG 0x00E04/* MDC/MDIO Configuration - RW */ #define IGC_CONNSW 0x00034/* Copper/Fiber switch control - RW */ #define IGC_VET 0x00038/* VLAN Ether Type - RW */ #define IGC_I225_PHPM 0x00E14/* I225 PHY Power Management */
Signature · 1 line
2.32.0
Fuxbrumer
PATCH v2 5/5 igc: Export LEDs
Quoted 17 lines · Vinicius Costa Gomes
From: Kurt Kanzenbach <[email protected]>
Each i225 has three LEDs. Export them via the LED class framework.
Each LED is controllable via sysfs. Example:
$ cd /sys/class/leds/igc_led0 $ cat brightness # Current Mode $ cat max_brightness # 15 $ echo 0 > brightness # Mode 0 $ echo 1 > brightness # Mode 1The brightness field here reflects the different LED modes ranging from 0 to 15.
Signed-off-by Kurt Kanzenbach <[email protected]>Reviewed-by Sebastian Andrzej Siewior <[email protected]>
Quoted 8 lines
--- drivers/net/ethernet/intel/Kconfig | 1 + drivers/net/ethernet/intel/igc/igc.h | 10 ++ drivers/net/ethernet/intel/igc/igc_defines.h | 10 ++ drivers/net/ethernet/intel/igc/igc_main.c | 132 +++++++++++++++++++ drivers/net/ethernet/intel/igc/igc_regs.h | 2 + 5 files changed, 155 insertions(+)