arm64: amlogic: Fix the pwm regulator supply property in node

On enable CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VDDCPU_A and VDDCPU_B pwm regulator to 12V regulator supply instead of dummy regulator.

[    4.147196] VDDCPU_A: will resolve supply early: pwm
[    4.147216] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply from device tree
[    4.147227] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply property in node /regulator-vddcpu-a failed
[    4.147258] VDDCPU_A: supplied by regulator-dummy
[    4.147288] regulator-dummy: could not add device link regulator.12: -ENOENT
[    4.147353] VDDCPU_A: 721 <--> 1022 mV at 871 mV, enabled
[    4.152014] VDDCPU_B: will resolve supply early: pwm
[    4.152035] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply from device tree
[    4.152047] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply property in node /regulator-vddcpu-b failed
[    4.152079] VDDCPU_B: supplied by regulator-dummy
[    4.152108] regulator-dummy: could not add device link regulator.13: -ENOENT

---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 344573e157a7..4f33820aba1f 100644
@@ -130,7 +130,7 @@ vddcpu_a: regulator-vddcpu-a {
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_ab 0 1250 0>;
 		pwm-dutycycle-range = <100 0>;

@@ -149,7 +149,7 @@ vddcpu_b: regulator-vddcpu-b {
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&main_12v>;
+		pwm-supply = <&main_12v>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;

2.31.1

Hi Anand,

thanks for investigating this and for sending a fix!

see my comment on the previous patch

I suggest changing the subject to include "dts", for example:
arm64: dts: amlogic: ...
(note: lower-case arm64 is correct here - even though it's different from the 32-bit ARM prefix)

$ grep -lR pwm-regulator arch/arm64/boot/dts/amlogic/
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
Are you planning to also send patches for the other board .dts as well?

Best regards,
Martin

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic