drm/amdgpu: Make noretry the default on yellow carp
Subsystems (2)
PATCH 1/1 drm/amdgpu: Make noretry the default on yellow carp
From: chen gong <[email protected]>
Performing kfd page fault tests on the yellow carp platform will fail.
From the scan data after the failure, it can be found that a nack=0x1(retry fault) is returned. but we did not enable the interrupts for retry faults in the code.
So we need to set noretry = 1 like the above ASICs.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c +1 -0
@@ -591,6 +591,7 @@ void amdgpu_gmc_noretry_set(struct amdgpu_device *adev)case CHIP_ARCTURUS :case CHIP_ALDEBARAN :case CHIP_BEIGE_GOBY : +case CHIP_YELLOW_CARP :/* * noretry = 0 will cause kfd page fault tests fail * for some ASICs, so set default to 1 for these ASICs.
Signature · 6 lines
2.25.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[AMD Official Use Only]
-----Original Message-----
From: Liu, Aaron <[email protected]>
Sent: Wednesday, June 30, 2021 1:57 PM
To: [email protected]
Cc: Deucher, Alexander <[email protected]>; Huang, Ray <[email protected]>; Gong, Curry <[email protected]>; Kuehling, Felix <[email protected]>; Liu, Aaron <[email protected]>; Huang, Ray <[email protected]>
Subject: [PATCH] drm/amdgpu: Make noretry the default on yellow carp
From: chen gong <[email protected]>
Performing kfd page fault tests on the yellow carp platform will fail.
From the scan data after the failure, it can be found that a nack=0x1(retry fault) is returned. but we did not enable the interrupts for retry faults in the code.
So we need to set noretry = 1 like the above ASICs.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c +1 -0
@@ -591,6 +591,7 @@ void amdgpu_gmc_noretry_set(struct amdgpu_device *adev)case CHIP_ARCTURUS :case CHIP_ALDEBARAN :case CHIP_BEIGE_GOBY : +case CHIP_YELLOW_CARP :/* * noretry = 0 will cause kfd page fault tests fail * for some ASICs, so set default to 1 for these ASICs.
--
2.25.1
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx