iio: accel: da311: convert probe to device-managed functions
PATCH 1/1 iio: accel: da311: convert probe to device-managed functions
This is another simple conversion to device-managed functions, requiring the use of devm_iio_device_register() and moving the disabling of the device on a devm_add_action_or_reset() hook.
The i2c_set_clientdata() can be removed, as the PM functions can work with just the device object, to obtain the i2c_client object.
Signed-off-by Alexandru Ardelean <[email protected]>
--- drivers/iio/accel/da311.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-)
drivers/iio/accel/da311.c +9 -17
@@ -212,6 +212,11 @@ static const struct iio_info da311_info = { .read_raw = da311_read_raw, }; +static void da311_disable (void *client) +{ +da311_enable (client, false); +} +static int da311_probe (struct i2c_client *client,const struct i2c_device_id *id) {
@@ -229,7 +234,6 @@ static int da311_probe(struct i2c_client *client, data =iio_priv (indio_dev); data->client = client; -i2c_set_clientdata (client, indio_dev); indio_dev->info = &da311_info; indio_dev->name ="da311" ;
@@ -245,22 +249,11 @@ static int da311_probe(struct i2c_client *client,if (ret <0 )return ret; - ret =iio_device_register (indio_dev); -if (ret <0 ) { -dev_err (&client->dev,"device_register failed\n" ); -da311_enable (client, false); - } - -return ret; -} - -static int da311_remove (struct i2c_client *client) -{ -struct iio_dev *indio_dev =i2c_get_clientdata (client); - -iio_device_unregister (indio_dev); + ret =devm_add_action_or_reset (&client->dev, da311_disable, client); +if (ret) +return ret; -return da311_enable (client, false); +return devm_iio_device_register (&client->dev, indio_dev); }#ifdef CONFIG_PM_SLEEP
@@ -289,7 +282,6 @@ static struct i2c_driver da311_driver = { .pm = &da311_pm_ops, }, .probe = da311_probe, - .remove = da311_remove, .id_table = da311_i2c_id, };
Signature · 1 line
2.31.1
Quoted 8 lines · On Wed, 30 Jun 2021 15:03:38 +0300 Alexandru Ardelean <[email protected]>…
This is another simple conversion to device-managed functions, requiring the use of
devm_iio_device_register()and moving the disabling of the device on adevm_add_action_or_reset()hook.The
i2c_set_clientdata()can be removed, as the PM functions can work with just the device object, to obtain thei2c_clientobject.Signed-off-by Alexandru Ardelean <[email protected]>
Applied,
Thanks,
J
Quoted 63 lines
--- drivers/iio/accel/da311.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-)drivers/iio/accel/da311.c +9
-17@@ -212,6 +212,11 @@ static const struct iio_info da311_info = { .read_raw = da311_read_raw, }; +static void da311_disable (void *client) +{ +da311_enable (client, false); +} +static int da311_probe (struct i2c_client *client,const struct i2c_device_id *id) {@@ -229,7 +234,6 @@ static int da311_probe(struct i2c_client *client, data =iio_priv (indio_dev); data->client = client; -i2c_set_clientdata (client, indio_dev); indio_dev->info = &da311_info; indio_dev->name ="da311" ;@@ -245,22 +249,11 @@ static int da311_probe(struct i2c_client *client,if (ret <0 )return ret; - ret =iio_device_register (indio_dev); -if (ret <0 ) { -dev_err (&client->dev,"device_register failed\n" ); -da311_enable (client, false); - } - -return ret; -} - -static int da311_remove (struct i2c_client *client) -{ -struct iio_dev *indio_dev =i2c_get_clientdata (client); - -iio_device_unregister (indio_dev); + ret =devm_add_action_or_reset (&client->dev, da311_disable, client); +if (ret) +return ret; -return da311_enable (client, false); +return devm_iio_device_register (&client->dev, indio_dev); }#ifdef CONFIG_PM_SLEEP @@ -289,7 +282,6 @@ static struct i2c_driver da311_driver = { .pm = &da311_pm_ops, }, .probe = da311_probe, - .remove = da311_remove, .id_table = da311_i2c_id, };