Skip to contentSkip to conversation

regulator: devres: disable regulator on release if refcount is 1

RFC PATCH In review Alexandru Ardelean 2 participants 4 messages Jun 25, 2021 – Jun 30, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 regulator: devres: disable regulator on release if refcount is 1

Evidently, this came about after doing a few of these types of constructs:

   static void reg_disable(void *reg)
   {
         regulator_disable(reg)
   }

...

   ret = regulator_enable(reg);
   if (ret)
       return ret;

   ret = devm_add_action_or_reset(dev, reg_disable, reg);

...

Naturally, the first thought was to try to move this construct into regulator core, but I remembered that a devm_regulator_enable() function isn't all that loved.
The construct above looks like it could become a short-hand (in the form of devm_regulator_enable()), somewhere in the regulator framework.

After going back through the previous discussions [referenced below, sorry if I missed any], it looks like maybe an idea would be to call regulator_disable() right before regulator_put() inside devm_regulator_release(). But we need to call it only if the 'enable_count' is 1.

This means that the last 'regulator_disable()' (on driver remove) becomes optional.
If there are any unbalanced regulator_enable()/regulator_disable() calls, the 'enable_count' won't be touched and 'regulator_put()' will print a warning.
The condition could be made to check if 'enable_count >= 1', and the behavior would be the same, but it's probably a good idea not to touch this refcount if isn't 1.

The only disadvantage to this approach, is that it changes the order in the drivers in which the register_disable() gets called, with respect to other steps in the probe/remove order.
With this, the register_disable() will be called right before the consumer reference is free'd.

But the other advantage is that regulator_disable() calls can be removed in simple drivers, where the consumer reference has been requested with devm_regulator_get().

References:
https://lore.kernel.org/lkml/20170213023249.GA27688@dtor-ws/
https://lkml.org/lkml/2014/2/4/940

Cc Dmitry Torokhov <[email protected]>
Cc Guenter Roeck <[email protected]>

---

Note: this patch applies indepently of this series:
https://lore.kernel.org/lkml/[email protected]/

 drivers/regulator/devres.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/regulator/devres.c +6 -1
index 826c29499d69..1852afc02990 100644
@@ -16,7 +16,12 @@
 
 static void devm_regulator_release(struct device *dev, void *res)
 {
-	regulator_put(*(struct regulator **)res);
+	struct regulator *regulator = *(struct regulator **)res;
+
+	if (regulator->enable_count == 1)
+		regulator_disable(regulator);
+
+	regulator_put(regulator);
 }
 
 static struct regulator *_devm_regulator_get(struct device *dev, const char *id,
Signature · 1 line
2.31.1
maintainer
#1 lore raw
Quoted 5 lines · Alexandru Ardelean

This means that the last 'regulator_disable()' (on driver remove) becomes optional.
If there are any unbalanced regulator_enable()/regulator_disable() calls, the 'enable_count' won't be touched and 'regulator_put()' will print a warning.

This doesn't seem like it's going to make reviewing and debugging reference counting issues any easier, it seems even more of a concern than a devm version TBH. It's also not clear why if we were doing this we'd restrict it to a single reference.

#2 lore raw
Quoted 9 lines · Mark Brown
Quoted 5 lines · Alexandru Ardelean

This means that the last 'regulator_disable()' (on driver remove) becomes optional.
If there are any unbalanced regulator_enable()/regulator_disable() calls, the 'enable_count' won't be touched and 'regulator_put()' will print a warning.

Quoted 4 lines

This doesn't seem like it's going to make reviewing and debugging reference counting issues any easier, it seems even more of a concern than a devm version TBH. It's also not clear why if we were doing this we'd restrict it to a single reference.

Yeah, it doesn't make much difference if the refcount is 1 or higher. For any refcount higher than 1, it's a serious unbalance of reg enable
+ disable.
And I agree that this may complicate reviews, as this would be one extra subtlety [in the regulator framework] to account for.

Will send an RFC v2 with the short-hand.
I'm not trying to force anything with this, but looking at all the repetitiveness of the devm_add_action_or_reset() hook to disable simple regulators, I thought I'd [also] propose a variant or another.

#3 lore raw

RFC PATCH v2 1/1 regulator: devres: add devm_regulator_enable() as short-hand

In reply to Alexandru Ardelean

Evidently, this came about after doing a few of these types of constructs:

    static void reg_disable(void *reg)
    {
        regulator_disable(reg)
    }
    ...
    ret = regulator_enable(reg);
    if (ret)
        return ret;

    ret = devm_add_action_or_reset(dev, reg_disable, reg);
    ...

A previous proposal was done via [1], to automatically decrease the enable refcount in devm_regulator_release() if it's 1.
A point was made that this [indeed] can cause issues with reviewing/tracking enable refcount.

I'm not sure [at this point in time] whether a devm_regulator_enable() function is still something that would be a good idea, given that this can cause issues with consumers potentially mixing regulator_enable() and devm_regulator_enable() calls. This concern was mentioned in [2].

But, there are now a number of simple drivers that are implementing the above construct already, so it may be an idea to propose this short-hand in the regulator framework.

References:
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/20170213023249.GA27688@dtor-ws/
[3] https://lkml.org/lkml/2014/2/4/940

Cc Dmitry Torokhov <[email protected]>
Cc Guenter Roeck <[email protected]>
---
 .../driver-api/driver-model/devres.rst        |  1 +
 drivers/regulator/devres.c                    | 20 +++++++++++++++++++
 include/linux/regulator/consumer.h            |  8 ++++++++
 3 files changed, 29 insertions(+)
Documentation/driver-api/driver-model/devres.rst +1 -0
index e0814d214048..8a92e0888cb8 100644
@@ -408,6 +408,7 @@ REGULATOR
   devm_regulator_get()
   devm_regulator_put()
   devm_regulator_register()
+  devm_regulator_enable()
 
 RESET
   devm_reset_control_get()
drivers/regulator/devres.c +20 -0
index a8de0aa88bad..dfb23ac178a0 100644
@@ -533,3 +533,23 @@ void *devm_regulator_irq_helper(struct device *dev,
 	return ptr;
 }
 EXPORT_SYMBOL_GPL(devm_regulator_irq_helper);
+
+static void devm_regulator_disable(void *regulator)
+{
+	regulator_disable(regulator);
+}
+
+/**
+ * devm_regulator_enable - device-managed regulator_enable
+ * @dev: device for regulator "consumer"
+ * @regulator: regulator source
+ *
+ * This will register an action handler for disabling the regulator
+ * by reistering a regulator_disable() call via devm_add_action_or_reset().
+ * It's meant to be a short-hand for all the drivers using this construct.
+ */
+int devm_regulator_enable(struct device *dev, struct regulator *regulator)
+{
+	return devm_add_action_or_reset(dev, devm_regulator_disable, regulator);
+}
+EXPORT_SYMBOL_GPL(devm_regulator_enable);
include/linux/regulator/consumer.h +8 -0
index f72ca73631be..01f17205c567 100644
@@ -236,6 +236,8 @@ void devm_regulator_bulk_unregister_supply_alias(struct device *dev,
 
 /* regulator output control and status */
 int __must_check regulator_enable(struct regulator *regulator);
+int __must_check devm_regulator_enable(struct device *dev,
+                                       struct regulator *regulator);
 int regulator_disable(struct regulator *regulator);
 int regulator_force_disable(struct regulator *regulator);
 int regulator_is_enabled(struct regulator *regulator);
@@ -432,6 +434,12 @@ static inline int regulator_enable(struct regulator *regulator)
 	return 0;
 }
 
+static inline int devm_regulator_enable(struct device *dev,
+                                        struct regulator *regulator)
+{
+	return 0;
+}
+
 static inline int regulator_disable(struct regulator *regulator)
 {
 	return 0;
Signature · 1 line
2.31.1