Skip to contentSkip to conversation

Generic XDP improvements

PATCH Superseded Kumar Kartikeya Dwivedi 2 participants 8 messages Jul 1, 2021 – Jul 2, 2021

Subsystems (9)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Kumar Kartikeya Dwivedi

author maintainer
#0 lore raw

v5 cover Generic XDP improvements

This small series makes some improvements to generic XDP mode and brings it closer to native XDP. Patch 1 splits out generic XDP processing into reusable parts, patch 2 adds pointer friendly wrappers for bitops (not have to cast back and forth the address of local pointer to unsigned long *), patch 3 implements generic cpumap support (details in commit) and patch 4 allows devmap bpf prog execution before generic_xdp_tx is called.

Patch 5 just updates a couple of selftests to adapt to changes in behavior (in that specifying devmap/cpumap prog fd in generic mode is now allowed).

Changelog:
----------
v4 -> v5
v4: https://lore.kernel.org/bpf/[email protected]
* Add comments and examples for new bitops macros (Alexei)

v3 -> v4
v3: https://lore.kernel.org/bpf/[email protected]
* Add detach now that attach of XDP program succeeds (Toke)
* Clean up the test to use new ASSERT macros

v2 -> v3
v2: https://lore.kernel.org/bpf/[email protected]
* list_for_each_entry -> list_for_each_entry_safe (due to deletion of skb)

v1 -> v2
v1: https://lore.kernel.org/bpf/[email protected]
* Move __ptr_{set,clear,test}_bit to bitops.h (Toke)
Also changed argument order to match the bit op they wrap.
* Remove map value size checking functions for cpumap/devmap (Toke)
* Rework prog run for skb in cpu_map_kthread_run (Toke)
* Set skb->dev to dst->dev after devmap prog has run
* Don't set xdp rxq that will be overwritten in cpumap prog run

Kumar Kartikeya Dwivedi (5):
net: core: split out code to run generic XDP prog
bitops: add non-atomic bitops for pointers
bpf: cpumap: implement generic cpumap
bpf: devmap: implement devmap prog execution for generic XDP
bpf: tidy xdp attach selftests

 include/linux/bitops.h                        |  50 ++++++++
 include/linux/bpf.h                           |  10 +-
 include/linux/netdevice.h                     |   2 +
 include/linux/skbuff.h                        |  10 +-
 include/linux/typecheck.h                     |   9 ++
 kernel/bpf/cpumap.c                           | 115 +++++++++++++++---
 kernel/bpf/devmap.c                           |  49 ++++++--
 net/core/dev.c                                | 103 ++++++++--------
 net/core/filter.c                             |   6 +-
 .../bpf/prog_tests/xdp_cpumap_attach.c        |  43 +++----
 .../bpf/prog_tests/xdp_devmap_attach.c        |  39 +++---
 11 files changed, 299 insertions(+), 137 deletions(-)
Signature · 1 line
2.31.1
author maintainer
#1 lore raw

PATCH v5 1/5 net: core: split out code to run generic XDP prog

This helper can later be utilized in code that runs cpumap and devmap programs in generic redirect mode and adjust skb based on changes made to xdp_buff.

When returning XDP_REDIRECT/XDP_TX, it invokes __skb_push, so whenever a generic redirect path invokes devmap/cpumap prog if set, it must __skb_pull again as we expect mac header to be pulled.

It also drops the skb_reset_mac_len call after do_xdp_generic, as the mac_header and network_header are advanced by the same offset, so the difference (mac_len) remains constant.

---
 include/linux/netdevice.h |  2 +
 net/core/dev.c            | 84 ++++++++++++++++++++++++---------------
 2 files changed, 55 insertions(+), 31 deletions(-)
include/linux/netdevice.h +2 -0
index be1dcceda5e4..90472ea70db2 100644
@@ -3984,6 +3984,8 @@ static inline void dev_consume_skb_any(struct sk_buff *skb)
 	__dev_kfree_skb_any(skb, SKB_REASON_CONSUMED);
 }
 
+u32 bpf_prog_run_generic_xdp(struct sk_buff *skb, struct xdp_buff *xdp,
+			     struct bpf_prog *xdp_prog);
 void generic_xdp_tx(struct sk_buff *skb, struct bpf_prog *xdp_prog);
 int do_xdp_generic(struct bpf_prog *xdp_prog, struct sk_buff *skb);
 int netif_rx(struct sk_buff *skb);
net/core/dev.c +53 -31

117 lines not on this page · raw message

Signature · 1 line
2.31.1
author maintainer
#2 lore raw

PATCH v5 2/5 bitops: add non-atomic bitops for pointers

In reply to Kumar Kartikeya Dwivedi

cpumap needs to set, clear, and test the lowest bit in skb pointer in various places. To make these checks less noisy, add pointer friendly bitop macros that also do some typechecking to sanitize the argument.

These wrap the non-atomic bitops __set_bit, __clear_bit, and test_bit but for pointer arguments. Pointer's address has to be passed in and it is treated as an unsigned long *, since width and representation of pointer and unsigned long match on targets Linux supports. They are prefixed with double underscore to indicate lack of atomicity.

---
 include/linux/bitops.h    | 50 +++++++++++++++++++++++++++++++++++++++
 include/linux/typecheck.h |  9 +++++++
 2 files changed, 59 insertions(+)
include/linux/bitops.h +50 -0
index 26bf15e6cd35..5e62e2383b7f 100644
@@ -4,6 +4,7 @@
 
 #include <asm/types.h>
 #include <linux/bits.h>
+#include <linux/typecheck.h>
 
 #include <uapi/linux/kernel.h>
 
@@ -253,6 +254,55 @@ static __always_inline void __assign_bit(long nr, volatile unsigned long *addr,
 		__clear_bit(nr, addr);
 }
 
+/**
+ * __ptr_set_bit - Set bit in a pointer's value
+ * @nr: the bit to set
+ * @addr: the address of the pointer variable
+ *
+ * Example:
+ *	void *p = foo();
+ *	__ptr_set_bit(bit, &p);
+ */
+#define __ptr_set_bit(nr, addr)                         \
+	({                                              \
+		typecheck_pointer(*(addr));             \
+		__set_bit(nr, (unsigned long *)(addr)); \
+	})
+
+/**
+ * __ptr_clear_bit - Clear bit in a pointer's value
+ * @nr: the bit to clear
+ * @addr: the address of the pointer variable
+ *
+ * Example:
+ *	void *p = foo();
+ *	__ptr_clear_bit(bit, &p);
+ */
+#define __ptr_clear_bit(nr, addr)                         \
+	({                                                \
+		typecheck_pointer(*(addr));               \
+		__clear_bit(nr, (unsigned long *)(addr)); \
+	})
+
+/**
+ * __ptr_test_bit - Test bit in a pointer's value
+ * @nr: the bit to test
+ * @addr: the address of the pointer variable
+ *
+ * Example:
+ *	void *p = foo();
+ *	if (__ptr_test_bit(bit, &p)) {
+ *	        ...
+ *	} else {
+ *		...
+ *	}
+ */
+#define __ptr_test_bit(nr, addr)                       \
+	({                                             \
+		typecheck_pointer(*(addr));            \
+		test_bit(nr, (unsigned long *)(addr)); \
+	})
+
 #ifdef __KERNEL__
 
 #ifndef set_mask_bits
include/linux/typecheck.h +9 -0
index 20d310331eb5..46b15e2aaefb 100644
@@ -22,4 +22,13 @@
 	(void)__tmp; \
 })
 
+/*
+ * Check at compile time that something is a pointer type.
+ */
+#define typecheck_pointer(x) \
+({	typeof(x) __dummy; \
+	(void)sizeof(*__dummy); \
+	1; \
+})
+
 #endif		/* TYPECHECK_H_INCLUDED */
Signature · 1 line
2.31.1
author maintainer
#3 lore raw

PATCH v5 3/5 bpf: cpumap: implement generic cpumap

In reply to Kumar Kartikeya Dwivedi

This change implements CPUMAP redirect support for generic XDP programs. The idea is to reuse the cpu map entry's queue that is used to push native xdp frames for redirecting skb to a different CPU. This will match native XDP behavior (in that RPS is invoked again for packet reinjected into networking stack).

To be able to determine whether the incoming skb is from the driver or cpumap, we reuse skb->redirected bit that skips generic XDP processing when it is set. To always make use of this, CONFIG_NET_REDIRECT guard on it has been lifted and it is always available.

From the redirect side, we add the skb to ptr_ring with its lowest bit set to 1. This should be safe as skb is not 1-byte aligned. This allows kthread to discern between xdp_frames and sk_buff. On consumption of the ptr_ring item, the lowest bit is unset.

In the end, the skb is simply added to the list that kthread is anyway going to maintain for xdp_frames converted to skb, and then received again by using netif_receive_skb_list.

Bulking optimization for generic cpumap is left as an exercise for a future patch for now.

Since cpumap entry progs are now supported, also remove check in generic_xdp_install for the cpumap.

---
 include/linux/bpf.h    |   9 +++-
 include/linux/skbuff.h |  10 +---
 kernel/bpf/cpumap.c    | 115 +++++++++++++++++++++++++++++++++++------
 net/core/dev.c         |   3 +-
 net/core/filter.c      |   6 ++-
 5 files changed, 115 insertions(+), 28 deletions(-)
include/linux/bpf.h +8 -1
index f309fc1509f2..095aaa104c56 100644
@@ -1513,7 +1513,8 @@ bool dev_map_can_have_prog(struct bpf_map *map);
 void __cpu_map_flush(void);
 int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
 		    struct net_device *dev_rx);
-bool cpu_map_prog_allowed(struct bpf_map *map);
+int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+			     struct sk_buff *skb);
 
 /* Return map's numa specified by userspace */
 static inline int bpf_map_attr_numa_node(const union bpf_attr *attr)
@@ -1710,6 +1711,12 @@ static inline int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu,
 	return 0;
 }
 
+static inline int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+					   struct sk_buff *skb)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline bool cpu_map_prog_allowed(struct bpf_map *map)
 {
 	return false;
include/linux/skbuff.h +2 -8
index b2db9cd9a73f..f19190820e63 100644
@@ -863,8 +863,8 @@ struct sk_buff {
 	__u8			tc_skip_classify:1;
 	__u8			tc_at_ingress:1;
 #endif
-#ifdef CONFIG_NET_REDIRECT
 	__u8			redirected:1;
+#ifdef CONFIG_NET_REDIRECT
 	__u8			from_ingress:1;
 #endif
 #ifdef CONFIG_TLS_DEVICE
@@ -4664,17 +4664,13 @@ static inline __wsum lco_csum(struct sk_buff *skb)
 
 static inline bool skb_is_redirected(const struct sk_buff *skb)
 {
-#ifdef CONFIG_NET_REDIRECT
 	return skb->redirected;
-#else
-	return false;
-#endif
 }
 
 static inline void skb_set_redirected(struct sk_buff *skb, bool from_ingress)
 {
-#ifdef CONFIG_NET_REDIRECT
 	skb->redirected = 1;
+#ifdef CONFIG_NET_REDIRECT
 	skb->from_ingress = from_ingress;
 	if (skb->from_ingress)
 		skb->tstamp = 0;
@@ -4683,9 +4679,7 @@ static inline void skb_set_redirected(struct sk_buff *skb, bool from_ingress)
 
 static inline void skb_reset_redirect(struct sk_buff *skb)
 {
-#ifdef CONFIG_NET_REDIRECT
 	skb->redirected = 0;
-#endif
 }
 
 static inline bool skb_csum_is_sctp(struct sk_buff *skb)
kernel/bpf/cpumap.c +99 -16

179 lines not on this page · raw message

net/core/dev.c +1 -2
index ad5ab33cbd39..8521936414f2 100644
@@ -5665,8 +5665,7 @@ static int generic_xdp_install(struct net_device *dev, struct netdev_bpf *xdp)
 		 * have a bpf_prog installed on an entry
 		 */
 		for (i = 0; i < new->aux->used_map_cnt; i++) {
-			if (dev_map_can_have_prog(new->aux->used_maps[i]) ||
-			    cpu_map_prog_allowed(new->aux->used_maps[i])) {
+			if (dev_map_can_have_prog(new->aux->used_maps[i])) {
 				mutex_unlock(&new->aux->used_maps_mutex);
 				return -EINVAL;
 			}
net/core/filter.c +5 -1
index 0b13d8157a8f..4a21fde3028f 100644
@@ -4038,8 +4038,12 @@ static int xdp_do_generic_redirect_map(struct net_device *dev,
 			goto err;
 		consume_skb(skb);
 		break;
+	case BPF_MAP_TYPE_CPUMAP:
+		err = cpu_map_generic_redirect(fwd, skb);
+		if (unlikely(err))
+			goto err;
+		break;
 	default:
-		/* TODO: Handle BPF_MAP_TYPE_CPUMAP */
 		err = -EBADRQC;
 		goto err;
 	}
Signature · 1 line
2.31.1
#4 lore raw

Re: [PATCH net-next v5 3/5] bpf: cpumap: implement generic cpumap

(Cc. Eric Leblond as he needed this for Suricata.)

Quoted 16 lines · Kumar Kartikeya Dwivedi

This change implements CPUMAP redirect support for generic XDP programs. The idea is to reuse the cpu map entry's queue that is used to push native xdp frames for redirecting skb to a different CPU. This will match native XDP behavior (in that RPS is invoked again for packet reinjected into networking stack).

To be able to determine whether the incoming skb is from the driver or cpumap, we reuse skb->redirected bit that skips generic XDP processing when it is set. To always make use of this, CONFIG_NET_REDIRECT guard on it has been lifted and it is always available.

From the redirect side, we add the skb to ptr_ring with its lowest bit
set to 1. This should be safe as skb is not 1-byte aligned. This allows kthread to discern between xdp_frames and sk_buff. On consumption of the ptr_ring item, the lowest bit is unset.

Quoted 6 lines

In the end, the skb is simply added to the list that kthread is anyway going to maintain for xdp_frames converted to skb, and then received again by using netif_receive_skb_list.

Bulking optimization for generic cpumap is left as an exercise for a future patch for now.

Fine by me, I hope bulking is added later, as I think with bulking this will be a faster alternative than RPS.

Quoted 101 lines

Since cpumap entry progs are now supported, also remove check in generic_xdp_install for the cpumap.

---
  include/linux/bpf.h    |   9 +++-
  include/linux/skbuff.h |  10 +---
  kernel/bpf/cpumap.c    | 115 +++++++++++++++++++++++++++++++++++------
  net/core/dev.c         |   3 +-
  net/core/filter.c      |   6 ++-
  5 files changed, 115 insertions(+), 28 deletions(-)
include/linux/bpf.h +8 -1
index f309fc1509f2..095aaa104c56 100644
@@ -1513,7 +1513,8 @@ bool dev_map_can_have_prog(struct bpf_map *map);
  void __cpu_map_flush(void);
  int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
  		    struct net_device *dev_rx);
-bool cpu_map_prog_allowed(struct bpf_map *map);
+int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+			     struct sk_buff *skb);
 
  /* Return map's numa specified by userspace */
  static inline int bpf_map_attr_numa_node(const union bpf_attr *attr)
@@ -1710,6 +1711,12 @@ static inline int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu,
  	return 0;
  }
 
+static inline int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+					   struct sk_buff *skb)
+{
+	return -EOPNOTSUPP;
+}
+
  static inline bool cpu_map_prog_allowed(struct bpf_map *map)
  {
  	return false;
include/linux/skbuff.h +2 -8
index b2db9cd9a73f..f19190820e63 100644
@@ -863,8 +863,8 @@ struct sk_buff {
  	__u8			tc_skip_classify:1;
  	__u8			tc_at_ingress:1;
  #endif
-#ifdef CONFIG_NET_REDIRECT
  	__u8			redirected:1;
+#ifdef CONFIG_NET_REDIRECT
  	__u8			from_ingress:1;
  #endif
  #ifdef CONFIG_TLS_DEVICE
@@ -4664,17 +4664,13 @@ static inline __wsum lco_csum(struct sk_buff *skb)
 
  static inline bool skb_is_redirected(const struct sk_buff *skb)
  {
-#ifdef CONFIG_NET_REDIRECT
  	return skb->redirected;
-#else
-	return false;
-#endif
  }
 
  static inline void skb_set_redirected(struct sk_buff *skb, bool from_ingress)
  {
-#ifdef CONFIG_NET_REDIRECT
  	skb->redirected = 1;
+#ifdef CONFIG_NET_REDIRECT
  	skb->from_ingress = from_ingress;
  	if (skb->from_ingress)
  		skb->tstamp = 0;
@@ -4683,9 +4679,7 @@ static inline void skb_set_redirected(struct sk_buff *skb, bool from_ingress)
 
  static inline void skb_reset_redirect(struct sk_buff *skb)
  {
-#ifdef CONFIG_NET_REDIRECT
  	skb->redirected = 0;
-#endif
  }
 
  static inline bool skb_csum_is_sctp(struct sk_buff *skb)
kernel/bpf/cpumap.c +2 -0
index a1a0c4e791c6..274353e2cd70 100644
@@ -16,6 +16,7 @@
   * netstack, and assigning dedicated CPUs for this stage.  This
   * basically allows for 10G wirespeed pre-filtering via bpf.
   */
+#include <linux/bitops.h>
  #include <linux/bpf.h>
  #include <linux/filter.h>
  #include <linux/ptr_ring.h>
@@ -168,6 +169,49 @@ static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu)
  	}
  }
 
+static void cpu_map_bpf_prog_run_skb(struct bpf_cpu_map_entry *rcpu,

kernel/bpf/cpumap.c static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) · line 182

Quoted 10 lines
kernel/bpf/cpumap.c +10 -0
+				     struct list_head *listp,
+				     struct xdp_cpumap_stats *stats)
+{
+	struct sk_buff *skb, *tmp;
+	struct xdp_buff xdp;
+	u32 act;
+	int err;
+
+	if (!rcpu->prog)
+		return;

Move this one level out. Why explained below.

Quoted 36 lines
kernel/bpf/cpumap.c +32 -0
+
+	list_for_each_entry_safe(skb, tmp, listp, list) {
+		act = bpf_prog_run_generic_xdp(skb, &xdp, rcpu->prog);
+		switch (act) {
+		case XDP_PASS:
+			break;
+		case XDP_REDIRECT:
+			skb_list_del_init(skb);
+			err = xdp_do_generic_redirect(skb->dev, skb, &xdp,
+						      rcpu->prog);
+			if (unlikely(err)) {
+				kfree_skb(skb);
+				stats->drop++;
+			} else {
+				stats->redirect++;
+			}
+			return;
+		default:
+			bpf_warn_invalid_xdp_action(act);
+			fallthrough;
+		case XDP_ABORTED:
+			trace_xdp_exception(skb->dev, rcpu->prog, act);
+			fallthrough;
+		case XDP_DROP:
+			skb_list_del_init(skb);
+			kfree_skb(skb);
+			stats->drop++;
+			return;
+		}
+	}
+}
+
  static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
  				    void **frames, int n,
  				    struct xdp_cpumap_stats *stats)

kernel/bpf/cpumap.c static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu, · line 183

Quoted 5 lines
kernel/bpf/cpumap.c +0 -2
@@ -179,8 +223,6 @@ static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
  	if (!rcpu->prog)
  		return n;
 
-	rcu_read_lock_bh();
-

Notice the return before doing rcu_read_lock_bh().

Here we try to avoid the extra call to do_softirq() when calling rcu_read_unlock_bh.

When RX-napi and cpumap share/run-on the same CPU, activating do_softirq() two time in the kthread_cpumap cause RX-napi to get more CPU time to enqueue more packets into cpumap.  Thus, cpumap can easier get overloaded.

Quoted 24 lines
kernel/bpf/cpumap.c +17 -0
  	xdp_set_return_frame_no_direct();
  	xdp.rxq = &rxq;
 
@@ -227,17 +269,34 @@ static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
  		}
  	}
 
+	xdp_clear_return_frame_no_direct();
+
+	return nframes;
+}
+
+#define CPUMAP_BATCH 8
+
+static int cpu_map_bpf_prog_run(struct bpf_cpu_map_entry *rcpu, void **frames,
+				int xdp_n, struct xdp_cpumap_stats *stats,
+				struct list_head *list)
+{
+	int nframes;
+
+	rcu_read_lock_bh();
+
+	nframes = cpu_map_bpf_prog_run_xdp(rcpu, frames, xdp_n, stats);
+

kernel/bpf/cpumap.c static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu, · line 295

Quoted 10 lines
kernel/bpf/cpumap.c +4 -3
  	if (stats->redirect)
-		xdp_do_flush_map();
+		xdp_do_flush();
 
-	xdp_clear_return_frame_no_direct();
+	if (unlikely(!list_empty(list)))
+		cpu_map_bpf_prog_run_skb(rcpu, list, stats);
 
-	rcu_read_unlock_bh(); /* resched point, may call do_softirq() */
+	rcu_read_unlock_bh();

I would like to keep this comment, to help people troubleshooting/understand why RX-napi to get more CPU time than kthread.

Quoted 112 lines
kernel/bpf/cpumap.c +34 -11
  	return nframes;
  }
 
-#define CPUMAP_BATCH 8
 
  static int cpu_map_kthread_run(void *data)
  {
@@ -254,9 +313,9 @@ static int cpu_map_kthread_run(void *data)
  		struct xdp_cpumap_stats stats = {}; /* zero stats */
  		unsigned int kmem_alloc_drops = 0, sched = 0;
  		gfp_t gfp = __GFP_ZERO | GFP_ATOMIC;
+		int i, n, m, nframes, xdp_n;
  		void *frames[CPUMAP_BATCH];
  		void *skbs[CPUMAP_BATCH];
-		int i, n, m, nframes;
  		LIST_HEAD(list);
 
  		/* Release CPU reschedule checks */
@@ -280,9 +339,20 @@ static int cpu_map_kthread_run(void *data)
  		 */
  		n = __ptr_ring_consume_batched(rcpu->queue, frames,
  					       CPUMAP_BATCH);
-		for (i = 0; i < n; i++) {
+		for (i = 0, xdp_n = 0; i < n; i++) {
  			void *f = frames[i];
-			struct page *page = virt_to_page(f);
+			struct page *page;
+
+			if (unlikely(__ptr_test_bit(0, &f))) {
+				struct sk_buff *skb = f;
+
+				__ptr_clear_bit(0, &skb);
+				list_add_tail(&skb->list, &list);
+				continue;
+			}
+
+			frames[xdp_n++] = f;
+			page = virt_to_page(f);
 
  			/* Bring struct page memory area to curr CPU. Read by
  			 * build_skb_around via page_is_pfmemalloc(), and when
@@ -292,7 +362,7 @@ static int cpu_map_kthread_run(void *data)
  		}
 
  		/* Support running another XDP prog on this CPU */
-		nframes = cpu_map_bpf_prog_run_xdp(rcpu, frames, n, &stats);
+		nframes = cpu_map_bpf_prog_run(rcpu, frames, xdp_n, &stats, &list);
  		if (nframes) {
  			m = kmem_cache_alloc_bulk(skbuff_head_cache, gfp, nframes, skbs);
  			if (unlikely(m == 0)) {
@@ -330,12 +400,6 @@ static int cpu_map_kthread_run(void *data)
  	return 0;
  }
 
-bool cpu_map_prog_allowed(struct bpf_map *map)
-{
-	return map->map_type == BPF_MAP_TYPE_CPUMAP &&
-	       map->value_size != offsetofend(struct bpf_cpumap_val, qsize);
-}
-
  static int __cpu_map_load_bpf_program(struct bpf_cpu_map_entry *rcpu, int fd)
  {
  	struct bpf_prog *prog;
@@ -696,6 +760,25 @@ int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
  	return 0;
  }
 
+int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+			     struct sk_buff *skb)
+{
+	int ret;
+
+	__skb_pull(skb, skb->mac_len);
+	skb_set_redirected(skb, false);
+	__ptr_set_bit(0, &skb);
+
+	ret = ptr_ring_produce(rcpu->queue, skb);
+	if (ret < 0)
+		goto trace;
+
+	wake_up_process(rcpu->kthread);
+trace:
+	trace_xdp_cpumap_enqueue(rcpu->map_id, !ret, !!ret, rcpu->cpu);
+	return ret;
+}
+
  void __cpu_map_flush(void)
  {
  	struct list_head *flush_list = this_cpu_ptr(&cpu_map_flush_list);
net/core/dev.c +1 -2
index ad5ab33cbd39..8521936414f2 100644
@@ -5665,8 +5665,7 @@ static int generic_xdp_install(struct net_device *dev, struct netdev_bpf *xdp)
  		 * have a bpf_prog installed on an entry
  		 */
  		for (i = 0; i < new->aux->used_map_cnt; i++) {
-			if (dev_map_can_have_prog(new->aux->used_maps[i]) ||
-			    cpu_map_prog_allowed(new->aux->used_maps[i])) {
+			if (dev_map_can_have_prog(new->aux->used_maps[i])) {
  				mutex_unlock(&new->aux->used_maps_mutex);
  				return -EINVAL;
  			}
net/core/filter.c +0 -0
index 0b13d8157a8f..4a21fde3028f 100644
@@ -4038,8 +4038,12 @@ static int xdp_do_generic_redirect_map(struct net_device *dev,
  			goto err;
  		consume_skb(skb);
  		break;

net/core/filter.c static int xdp_do_generic_redirect_map(struct net_device *dev, · line 4049

Quoted 10 lines
net/core/filter.c +5 -1
+	case BPF_MAP_TYPE_CPUMAP:
+		err = cpu_map_generic_redirect(fwd, skb);
+		if (unlikely(err))
+			goto err;
+		break;
  	default:
-		/* TODO: Handle BPF_MAP_TYPE_CPUMAP */
  		err = -EBADRQC;
  		goto err;
  	}

I like the rest :-)

Thanks for working on this!

--Jesper

author maintainer
#5 lore raw

Re: [PATCH net-next v5 3/5] bpf: cpumap: implement generic cpumap

Quoted 339 lines · Jesper Dangaard Brouer

(Cc. Eric Leblond as he needed this for Suricata.)

Quoted 16 lines · Kumar Kartikeya Dwivedi

This change implements CPUMAP redirect support for generic XDP programs. The idea is to reuse the cpu map entry's queue that is used to push native xdp frames for redirecting skb to a different CPU. This will match native XDP behavior (in that RPS is invoked again for packet reinjected into networking stack).

To be able to determine whether the incoming skb is from the driver or cpumap, we reuse skb->redirected bit that skips generic XDP processing when it is set. To always make use of this, CONFIG_NET_REDIRECT guard on it has been lifted and it is always available.

From the redirect side, we add the skb to ptr_ring with its lowest bit
set to 1. This should be safe as skb is not 1-byte aligned. This allows kthread to discern between xdp_frames and sk_buff. On consumption of the ptr_ring item, the lowest bit is unset.

Quoted 6 lines

In the end, the skb is simply added to the list that kthread is anyway going to maintain for xdp_frames converted to skb, and then received again by using netif_receive_skb_list.

Bulking optimization for generic cpumap is left as an exercise for a future patch for now.

Fine by me, I hope bulking is added later, as I think with bulking this will be a faster alternative than RPS.

Quoted 94 lines

Since cpumap entry progs are now supported, also remove check in generic_xdp_install for the cpumap.

---
  include/linux/bpf.h    |   9 +++-
  include/linux/skbuff.h |  10 +---
  kernel/bpf/cpumap.c    | 115 +++++++++++++++++++++++++++++++++++------
  net/core/dev.c         |   3 +-
  net/core/filter.c      |   6 ++-
  5 files changed, 115 insertions(+), 28 deletions(-)
include/linux/bpf.h +8 -1
index f309fc1509f2..095aaa104c56 100644
@@ -1513,7 +1513,8 @@ bool dev_map_can_have_prog(struct bpf_map *map);
  void __cpu_map_flush(void);
  int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
  		    struct net_device *dev_rx);
-bool cpu_map_prog_allowed(struct bpf_map *map);
+int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+			     struct sk_buff *skb);
  /* Return map's numa specified by userspace */
  static inline int bpf_map_attr_numa_node(const union bpf_attr *attr)
@@ -1710,6 +1711,12 @@ static inline int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu,
  	return 0;
  }
+static inline int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+					   struct sk_buff *skb)
+{
+	return -EOPNOTSUPP;
+}
+
  static inline bool cpu_map_prog_allowed(struct bpf_map *map)
  {
  	return false;
include/linux/skbuff.h +2 -8
index b2db9cd9a73f..f19190820e63 100644
@@ -863,8 +863,8 @@ struct sk_buff {
  	__u8			tc_skip_classify:1;
  	__u8			tc_at_ingress:1;
  #endif
-#ifdef CONFIG_NET_REDIRECT
  	__u8			redirected:1;
+#ifdef CONFIG_NET_REDIRECT
  	__u8			from_ingress:1;
  #endif
  #ifdef CONFIG_TLS_DEVICE
@@ -4664,17 +4664,13 @@ static inline __wsum lco_csum(struct sk_buff *skb)
  static inline bool skb_is_redirected(const struct sk_buff *skb)
  {
-#ifdef CONFIG_NET_REDIRECT
  	return skb->redirected;
-#else
-	return false;
-#endif
  }
  static inline void skb_set_redirected(struct sk_buff *skb, bool from_ingress)
  {
-#ifdef CONFIG_NET_REDIRECT
  	skb->redirected = 1;
+#ifdef CONFIG_NET_REDIRECT
  	skb->from_ingress = from_ingress;
  	if (skb->from_ingress)
  		skb->tstamp = 0;
@@ -4683,9 +4679,7 @@ static inline void skb_set_redirected(struct sk_buff *skb, bool from_ingress)
  static inline void skb_reset_redirect(struct sk_buff *skb)
  {
-#ifdef CONFIG_NET_REDIRECT
  	skb->redirected = 0;
-#endif
  }
  static inline bool skb_csum_is_sctp(struct sk_buff *skb)
kernel/bpf/cpumap.c +2 -0
index a1a0c4e791c6..274353e2cd70 100644
@@ -16,6 +16,7 @@
   * netstack, and assigning dedicated CPUs for this stage.  This
   * basically allows for 10G wirespeed pre-filtering via bpf.
   */
+#include <linux/bitops.h>
  #include <linux/bpf.h>
  #include <linux/filter.h>
  #include <linux/ptr_ring.h>
@@ -168,6 +169,49 @@ static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu)
  	}
  }
+static void cpu_map_bpf_prog_run_skb(struct bpf_cpu_map_entry *rcpu,

kernel/bpf/cpumap.c static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) · line 181

Quoted 10 lines
kernel/bpf/cpumap.c +10 -0
+				     struct list_head *listp,
+				     struct xdp_cpumap_stats *stats)
+{
+	struct sk_buff *skb, *tmp;
+	struct xdp_buff xdp;
+	u32 act;
+	int err;
+
+	if (!rcpu->prog)
+		return;

Move this one level out. Why explained below.

Quoted 36 lines
kernel/bpf/cpumap.c +32 -0
+
+	list_for_each_entry_safe(skb, tmp, listp, list) {
+		act = bpf_prog_run_generic_xdp(skb, &xdp, rcpu->prog);
+		switch (act) {
+		case XDP_PASS:
+			break;
+		case XDP_REDIRECT:
+			skb_list_del_init(skb);
+			err = xdp_do_generic_redirect(skb->dev, skb, &xdp,
+						      rcpu->prog);
+			if (unlikely(err)) {
+				kfree_skb(skb);
+				stats->drop++;
+			} else {
+				stats->redirect++;
+			}
+			return;
+		default:
+			bpf_warn_invalid_xdp_action(act);
+			fallthrough;
+		case XDP_ABORTED:
+			trace_xdp_exception(skb->dev, rcpu->prog, act);
+			fallthrough;
+		case XDP_DROP:
+			skb_list_del_init(skb);
+			kfree_skb(skb);
+			stats->drop++;
+			return;
+		}
+	}
+}
+
  static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
  				    void **frames, int n,
  				    struct xdp_cpumap_stats *stats)

kernel/bpf/cpumap.c static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu, · line 182

Quoted 4 lines
kernel/bpf/cpumap.c +0 -2
@@ -179,8 +223,6 @@ static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
  	if (!rcpu->prog)
  		return n;
-	rcu_read_lock_bh();
-

Notice the return before doing rcu_read_lock_bh().

Here we try to avoid the extra call to do_softirq() when calling rcu_read_unlock_bh.

When RX-napi and cpumap share/run-on the same CPU, activating do_softirq() two time in the kthread_cpumap cause RX-napi to get more CPU time to enqueue more packets into cpumap.  Thus, cpumap can easier get overloaded.

Quoted 20 lines
kernel/bpf/cpumap.c +15 -0
  	xdp_set_return_frame_no_direct();
  	xdp.rxq = &rxq;
@@ -227,17 +269,34 @@ static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu,
  		}
  	}
+	xdp_clear_return_frame_no_direct();
+
+	return nframes;
+}
+
+#define CPUMAP_BATCH 8
+
+static int cpu_map_bpf_prog_run(struct bpf_cpu_map_entry *rcpu, void **frames,
+				int xdp_n, struct xdp_cpumap_stats *stats,
+				struct list_head *list)
+{
+	int nframes;
+
+	rcu_read_lock_bh();
+

kernel/bpf/cpumap.c static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu, · line 292

Quoted 10 lines
kernel/bpf/cpumap.c +6 -3
+	nframes = cpu_map_bpf_prog_run_xdp(rcpu, frames, xdp_n, stats);
+
  	if (stats->redirect)
-		xdp_do_flush_map();
+		xdp_do_flush();
-	xdp_clear_return_frame_no_direct();
+	if (unlikely(!list_empty(list)))
+		cpu_map_bpf_prog_run_skb(rcpu, list, stats);
-	rcu_read_unlock_bh(); /* resched point, may call do_softirq() */
+	rcu_read_unlock_bh();

I would like to keep this comment, to help people troubleshooting/understand why RX-napi to get more CPU time than kthread.

Quoted 104 lines
kernel/bpf/cpumap.c +34 -11
  	return nframes;
  }
-#define CPUMAP_BATCH 8
  static int cpu_map_kthread_run(void *data)
  {
@@ -254,9 +313,9 @@ static int cpu_map_kthread_run(void *data)
  		struct xdp_cpumap_stats stats = {}; /* zero stats */
  		unsigned int kmem_alloc_drops = 0, sched = 0;
  		gfp_t gfp = __GFP_ZERO | GFP_ATOMIC;
+		int i, n, m, nframes, xdp_n;
  		void *frames[CPUMAP_BATCH];
  		void *skbs[CPUMAP_BATCH];
-		int i, n, m, nframes;
  		LIST_HEAD(list);
  		/* Release CPU reschedule checks */
@@ -280,9 +339,20 @@ static int cpu_map_kthread_run(void *data)
  		 */
  		n = __ptr_ring_consume_batched(rcpu->queue, frames,
  					       CPUMAP_BATCH);
-		for (i = 0; i < n; i++) {
+		for (i = 0, xdp_n = 0; i < n; i++) {
  			void *f = frames[i];
-			struct page *page = virt_to_page(f);
+			struct page *page;
+
+			if (unlikely(__ptr_test_bit(0, &f))) {
+				struct sk_buff *skb = f;
+
+				__ptr_clear_bit(0, &skb);
+				list_add_tail(&skb->list, &list);
+				continue;
+			}
+
+			frames[xdp_n++] = f;
+			page = virt_to_page(f);
  			/* Bring struct page memory area to curr CPU. Read by
  			 * build_skb_around via page_is_pfmemalloc(), and when
@@ -292,7 +362,7 @@ static int cpu_map_kthread_run(void *data)
  		}
  		/* Support running another XDP prog on this CPU */
-		nframes = cpu_map_bpf_prog_run_xdp(rcpu, frames, n, &stats);
+		nframes = cpu_map_bpf_prog_run(rcpu, frames, xdp_n, &stats, &list);
  		if (nframes) {
  			m = kmem_cache_alloc_bulk(skbuff_head_cache, gfp, nframes, skbs);
  			if (unlikely(m == 0)) {
@@ -330,12 +400,6 @@ static int cpu_map_kthread_run(void *data)
  	return 0;
  }
-bool cpu_map_prog_allowed(struct bpf_map *map)
-{
-	return map->map_type == BPF_MAP_TYPE_CPUMAP &&
-	       map->value_size != offsetofend(struct bpf_cpumap_val, qsize);
-}
-
  static int __cpu_map_load_bpf_program(struct bpf_cpu_map_entry *rcpu, int fd)
  {
  	struct bpf_prog *prog;
@@ -696,6 +760,25 @@ int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
  	return 0;
  }
+int cpu_map_generic_redirect(struct bpf_cpu_map_entry *rcpu,
+			     struct sk_buff *skb)
+{
+	int ret;
+
+	__skb_pull(skb, skb->mac_len);
+	skb_set_redirected(skb, false);
+	__ptr_set_bit(0, &skb);
+
+	ret = ptr_ring_produce(rcpu->queue, skb);
+	if (ret < 0)
+		goto trace;
+
+	wake_up_process(rcpu->kthread);
+trace:
+	trace_xdp_cpumap_enqueue(rcpu->map_id, !ret, !!ret, rcpu->cpu);
+	return ret;
+}
+
  void __cpu_map_flush(void)
  {
  	struct list_head *flush_list = this_cpu_ptr(&cpu_map_flush_list);
net/core/dev.c +1 -2
index ad5ab33cbd39..8521936414f2 100644
@@ -5665,8 +5665,7 @@ static int generic_xdp_install(struct net_device *dev, struct netdev_bpf *xdp)
  		 * have a bpf_prog installed on an entry
  		 */
  		for (i = 0; i < new->aux->used_map_cnt; i++) {
-			if (dev_map_can_have_prog(new->aux->used_maps[i]) ||
-			    cpu_map_prog_allowed(new->aux->used_maps[i])) {
+			if (dev_map_can_have_prog(new->aux->used_maps[i])) {
  				mutex_unlock(&new->aux->used_maps_mutex);
  				return -EINVAL;
  			}
net/core/filter.c +0 -0
index 0b13d8157a8f..4a21fde3028f 100644
@@ -4038,8 +4038,12 @@ static int xdp_do_generic_redirect_map(struct net_device *dev,
  			goto err;
  		consume_skb(skb);
  		break;

net/core/filter.c static int xdp_do_generic_redirect_map(struct net_device *dev, · line 4049

Quoted 10 lines
net/core/filter.c +5 -1
+	case BPF_MAP_TYPE_CPUMAP:
+		err = cpu_map_generic_redirect(fwd, skb);
+		if (unlikely(err))
+			goto err;
+		break;
  	default:
-		/* TODO: Handle BPF_MAP_TYPE_CPUMAP */
  		err = -EBADRQC;
  		goto err;
  	}

I like the rest :-)

Quoted 4 lines

Thanks for working on this!

--Jesper

Hopefully addressed both points in the respin, thanks!

--
Kartikeya

author maintainer
#6 lore raw

PATCH v5 4/5 bpf: devmap: implement devmap prog execution for generic XDP

In reply to Kumar Kartikeya Dwivedi

This lifts the restriction on running devmap BPF progs in generic redirect mode. To match native XDP behavior, it is invoked right before generic_xdp_tx is called, and only supports XDP_PASS/XDP_ABORTED/ XDP_DROP actions.

We also return 0 even if devmap program drops the packet, as semantically redirect has already succeeded and the devmap prog is the last point before TX of the packet to device where it can deliver a verdict on the packet.

This also means it must take care of freeing the skb, as xdp_do_generic_redirect callers only do that in case an error is returned.

Since devmap entry prog is supported, remove the check in generic_xdp_install entirely.

---
 include/linux/bpf.h |  1 -
 kernel/bpf/devmap.c | 49 ++++++++++++++++++++++++++++++++++++---------
 net/core/dev.c      | 18 -----------------
 3 files changed, 39 insertions(+), 29 deletions(-)
include/linux/bpf.h +0 -1
index 095aaa104c56..4afbff308ca3 100644
@@ -1508,7 +1508,6 @@ int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, struct sk_buff *skb,
 int dev_map_redirect_multi(struct net_device *dev, struct sk_buff *skb,
 			   struct bpf_prog *xdp_prog, struct bpf_map *map,
 			   bool exclude_ingress);
-bool dev_map_can_have_prog(struct bpf_map *map);
 
 void __cpu_map_flush(void);
 int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
kernel/bpf/devmap.c +39 -10

67 lines not on this page · raw message

net/core/dev.c +0 -18
index 8521936414f2..c674fe191e8a 100644
@@ -5656,24 +5656,6 @@ static int generic_xdp_install(struct net_device *dev, struct netdev_bpf *xdp)
 	struct bpf_prog *new = xdp->prog;
 	int ret = 0;
 
-	if (new) {
-		u32 i;
-
-		mutex_lock(&new->aux->used_maps_mutex);
-
-		/* generic XDP does not work with DEVMAPs that can
-		 * have a bpf_prog installed on an entry
-		 */
-		for (i = 0; i < new->aux->used_map_cnt; i++) {
-			if (dev_map_can_have_prog(new->aux->used_maps[i])) {
-				mutex_unlock(&new->aux->used_maps_mutex);
-				return -EINVAL;
-			}
-		}
-
-		mutex_unlock(&new->aux->used_maps_mutex);
-	}
-
 	switch (xdp->command) {
 	case XDP_SETUP_PROG:
 		rcu_assign_pointer(dev->xdp_prog, new);
Signature · 1 line
2.31.1
author maintainer
#7 lore raw

PATCH v5 5/5 bpf: tidy xdp attach selftests

In reply to Kumar Kartikeya Dwivedi

Support for cpumap and devmap entry progs in previous commits means the test needs to be updated for the new semantics. Also take this opportunity to convert it from CHECK macros to the new ASSERT macros.

Since xdp_cpumap_attach has no subtest, put the sole test inside test_xdptest_xdp_cpumap_attach function.

---
 .../bpf/prog_tests/xdp_cpumap_attach.c        | 43 +++++++------------
 .../bpf/prog_tests/xdp_devmap_attach.c        | 39 +++++++----------
 2 files changed, 32 insertions(+), 50 deletions(-)
tools/testing/selftests/bpf/prog_tests/xdp_cpumap_attach.c +16 -27
index 0176573fe4e7..8755effd80b0 100644
@@ -7,64 +7,53 @@
 
 #define IFINDEX_LO	1
 
-void test_xdp_with_cpumap_helpers(void)
+void test_xdp_cpumap_attach(void)
 {
 	struct test_xdp_with_cpumap_helpers *skel;
 	struct bpf_prog_info info = {};
+	__u32 len = sizeof(info);
 	struct bpf_cpumap_val val = {
 		.qsize = 192,
 	};
-	__u32 duration = 0, idx = 0;
-	__u32 len = sizeof(info);
 	int err, prog_fd, map_fd;
+	__u32 idx = 0;
 
 	skel = test_xdp_with_cpumap_helpers__open_and_load();
-	if (CHECK_FAIL(!skel)) {
-		perror("test_xdp_with_cpumap_helpers__open_and_load");
+	if (!ASSERT_OK_PTR(skel, "test_xdp_with_cpumap_helpers__open_and_load"))
 		return;
-	}
 
-	/* can not attach program with cpumaps that allow programs
-	 * as xdp generic
-	 */
 	prog_fd = bpf_program__fd(skel->progs.xdp_redir_prog);
 	err = bpf_set_link_xdp_fd(IFINDEX_LO, prog_fd, XDP_FLAGS_SKB_MODE);
-	CHECK(err == 0, "Generic attach of program with 8-byte CPUMAP",
-	      "should have failed\n");
+	if (!ASSERT_OK(err, "Generic attach of program with 8-byte CPUMAP"))
+		goto out_close;
+
+	err = bpf_set_link_xdp_fd(IFINDEX_LO, -1, XDP_FLAGS_SKB_MODE);
+	ASSERT_OK(err, "XDP program detach");
 
 	prog_fd = bpf_program__fd(skel->progs.xdp_dummy_cm);
 	map_fd = bpf_map__fd(skel->maps.cpu_map);
 	err = bpf_obj_get_info_by_fd(prog_fd, &info, &len);
-	if (CHECK_FAIL(err))
+	if (!ASSERT_OK(err, "bpf_obj_get_info_by_fd"))
 		goto out_close;
 
 	val.bpf_prog.fd = prog_fd;
 	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
-	CHECK(err, "Add program to cpumap entry", "err %d errno %d\n",
-	      err, errno);
+	ASSERT_OK(err, "Add program to cpumap entry");
 
 	err = bpf_map_lookup_elem(map_fd, &idx, &val);
-	CHECK(err, "Read cpumap entry", "err %d errno %d\n", err, errno);
-	CHECK(info.id != val.bpf_prog.id, "Expected program id in cpumap entry",
-	      "expected %u read %u\n", info.id, val.bpf_prog.id);
+	ASSERT_OK(err, "Read cpumap entry");
+	ASSERT_EQ(info.id, val.bpf_prog.id, "Match program id to cpumap entry prog_id");
 
 	/* can not attach BPF_XDP_CPUMAP program to a device */
 	err = bpf_set_link_xdp_fd(IFINDEX_LO, prog_fd, XDP_FLAGS_SKB_MODE);
-	CHECK(err == 0, "Attach of BPF_XDP_CPUMAP program",
-	      "should have failed\n");
+	if (!ASSERT_NEQ(err, 0, "Attach of BPF_XDP_CPUMAP program"))
+		bpf_set_link_xdp_fd(IFINDEX_LO, -1, XDP_FLAGS_SKB_MODE);
 
 	val.qsize = 192;
 	val.bpf_prog.fd = bpf_program__fd(skel->progs.xdp_dummy_prog);
 	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
-	CHECK(err == 0, "Add non-BPF_XDP_CPUMAP program to cpumap entry",
-	      "should have failed\n");
+	ASSERT_NEQ(err, 0, "Add non-BPF_XDP_CPUMAP program to cpumap entry");
 
 out_close:
 	test_xdp_with_cpumap_helpers__destroy(skel);
 }
-
-void test_xdp_cpumap_attach(void)
-{
-	if (test__start_subtest("cpumap_with_progs"))
-		test_xdp_with_cpumap_helpers();
-}
tools/testing/selftests/bpf/prog_tests/xdp_devmap_attach.c +16 -23
index 88ef3ec8ac4c..c72af030ff10 100644
@@ -16,50 +16,45 @@ void test_xdp_with_devmap_helpers(void)
 		.ifindex = IFINDEX_LO,
 	};
 	__u32 len = sizeof(info);
-	__u32 duration = 0, idx = 0;
 	int err, dm_fd, map_fd;
+	__u32 idx = 0;
 
 
 	skel = test_xdp_with_devmap_helpers__open_and_load();
-	if (CHECK_FAIL(!skel)) {
-		perror("test_xdp_with_devmap_helpers__open_and_load");
+	if (!ASSERT_OK_PTR(skel, "test_xdp_with_devmap_helpers__open_and_load"))
 		return;
-	}
 
-	/* can not attach program with DEVMAPs that allow programs
-	 * as xdp generic
-	 */
 	dm_fd = bpf_program__fd(skel->progs.xdp_redir_prog);
 	err = bpf_set_link_xdp_fd(IFINDEX_LO, dm_fd, XDP_FLAGS_SKB_MODE);
-	CHECK(err == 0, "Generic attach of program with 8-byte devmap",
-	      "should have failed\n");
+	if (!ASSERT_OK(err, "Generic attach of program with 8-byte devmap"))
+		goto out_close;
+
+	err = bpf_set_link_xdp_fd(IFINDEX_LO, -1, XDP_FLAGS_SKB_MODE);
+	ASSERT_OK(err, "XDP program detach");
 
 	dm_fd = bpf_program__fd(skel->progs.xdp_dummy_dm);
 	map_fd = bpf_map__fd(skel->maps.dm_ports);
 	err = bpf_obj_get_info_by_fd(dm_fd, &info, &len);
-	if (CHECK_FAIL(err))
+	if (!ASSERT_OK(err, "bpf_obj_get_info_by_fd"))
 		goto out_close;
 
 	val.bpf_prog.fd = dm_fd;
 	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
-	CHECK(err, "Add program to devmap entry",
-	      "err %d errno %d\n", err, errno);
+	ASSERT_OK(err, "Add program to devmap entry");
 
 	err = bpf_map_lookup_elem(map_fd, &idx, &val);
-	CHECK(err, "Read devmap entry", "err %d errno %d\n", err, errno);
-	CHECK(info.id != val.bpf_prog.id, "Expected program id in devmap entry",
-	      "expected %u read %u\n", info.id, val.bpf_prog.id);
+	ASSERT_OK(err, "Read devmap entry");
+	ASSERT_EQ(info.id, val.bpf_prog.id, "Match program id to devmap entry prog_id");
 
 	/* can not attach BPF_XDP_DEVMAP program to a device */
 	err = bpf_set_link_xdp_fd(IFINDEX_LO, dm_fd, XDP_FLAGS_SKB_MODE);
-	CHECK(err == 0, "Attach of BPF_XDP_DEVMAP program",
-	      "should have failed\n");
+	if (!ASSERT_NEQ(err, 0, "Attach of BPF_XDP_DEVMAP program"))
+		bpf_set_link_xdp_fd(IFINDEX_LO, -1, XDP_FLAGS_SKB_MODE);
 
 	val.ifindex = 1;
 	val.bpf_prog.fd = bpf_program__fd(skel->progs.xdp_dummy_prog);
 	err = bpf_map_update_elem(map_fd, &idx, &val, 0);
-	CHECK(err == 0, "Add non-BPF_XDP_DEVMAP program to devmap entry",
-	      "should have failed\n");
+	ASSERT_NEQ(err, 0, "Add non-BPF_XDP_DEVMAP program to devmap entry");
 
 out_close:
 	test_xdp_with_devmap_helpers__destroy(skel);
@@ -68,12 +63,10 @@ void test_xdp_with_devmap_helpers(void)
 void test_neg_xdp_devmap_helpers(void)
 {
 	struct test_xdp_devmap_helpers *skel;
-	__u32 duration = 0;
 
 	skel = test_xdp_devmap_helpers__open_and_load();
-	if (CHECK(skel,
-		  "Load of XDP program accessing egress ifindex without attach type",
-		  "should have failed\n")) {
+	if (!ASSERT_EQ(skel, NULL,
+		    "Load of XDP program accessing egress ifindex without attach type")) {
 		test_xdp_devmap_helpers__destroy(skel);
 	}
 }
Signature · 1 line
2.31.1