UFS patches for kernel v5.15
Subsystems (4)
cover UFS patches for kernel v5.15
Hi Martin,
Please consider the patches in this series for kernel v5.15. As one can see this patch series includes one ATA patch, four SCSI core patches and 16 UFS patches.
Thanks,
Bart.
Bart Van Assche (21):
Fix the documentation of the scsi_execute() time parameter
libsas: Only abort commands from inside the error handler Clear host_eh_scheduled from inside the SCSI error handler
libsas: Stop clearing host_eh_scheduled from the error handler
ata: Stop clearing host_eh_scheduled from error handlers
ufs: Reduce power management code duplication
ufs: Only include power management code if necessary
ufs: Rename the second ufshcd_probe_hba() argument
ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate
ufs: Remove ufshcd_valid_tag()
ufs: Verify UIC locking requirements at runtime
ufs: Improve static type checking for the host controller state
ufs: Remove several wmb() calls
ufs: Inline ufshcd_outstanding_req_clear()
ufs: Rename __ufshcd_transfer_req_compl()
ufs: Fix the SCSI abort handler
ufs: Fix a race in the completion path
ufs: Use the doorbell register instead of the UTRLCNR register
ufs: Request sense data asynchronously
ufs: Synchronize SCSI and UFS error handling
ufs: Retry aborted SCSI commands instead of completing these
successfully
drivers/ata/libata-core.c | 2 - drivers/ata/libata-eh.c | 30 +- drivers/scsi/libsas/sas_scsi_host.c | 9 +- drivers/scsi/scsi_error.c | 7 + drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/ufs/cdns-pltfrm.c | 7 +- drivers/scsi/ufs/tc-dwc-g210-pci.c | 32 +- drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 7 +- drivers/scsi/ufs/ufs-exynos.c | 7 +- drivers/scsi/ufs/ufs-hisi.c | 7 +- drivers/scsi/ufs/ufs-mediatek.c | 7 +- drivers/scsi/ufs/ufs-qcom.c | 7 +- drivers/scsi/ufs/ufshcd-pci.c | 48 +-- drivers/scsi/ufs/ufshcd-pltfrm.c | 47 --- drivers/scsi/ufs/ufshcd-pltfrm.h | 18 - drivers/scsi/ufs/ufshcd.c | 467 +++++++++++--------------- drivers/scsi/ufs/ufshcd.h | 48 ++- include/linux/libata.h | 1 - include/scsi/libsas.h | 1 + 19 files changed, 271 insertions(+), 483 deletions(-)
PATCH 1/21 Fix the documentation of the scsi_execute() time parameter
The unit of the scsi_execute() timeout parameter is 1/HZ seconds instead of one second, just like the timeouts used in the block layer. Fix the documentation header above the definition of the scsi_execute() macro.
--- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/scsi_lib.c +1 -1
@@ -194,7 +194,7 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)* @bufflen: len of buffer * @sense: optional sense buffer * @sshdr: optional decoded sense header -* @timeout: request timeout in seconds +* @timeout: request timeout in HZ * @retries: number of times to retry request * @flags: flags for ->cmd_flags * @rq_flags: flags for ->rq_flags
RE: [PATCH 01/21] Fix the documentation of the scsi_execute() time parameter
Quoted 11 lines
The unit of the
scsi_execute()timeout parameter is 1/HZ seconds instead of one second, just like the timeouts used in the block layer. Fix the documentation header above the definition of thescsi_execute()macro.Cc: "James E.J. Bottomley" <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: John Garry <[email protected]>
Fixes: "[SCSI] use scatter lists for all block pc requests and simplify hw handlers" # v2.6.16.28Signed-off-by Bart Van Assche <[email protected]>
Quoted 18 lines
--- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/scsi/scsi_lib.c +1
-1@@ -194,7 +194,7 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * @bufflen: len of buffer * @sense: optional sense buffer * @sshdr: optional decoded sense header - * @timeout: request timeout in seconds + * @timeout: request timeout in HZ * @retries: number of times to retry request * @flags: flags for ->cmd_flags* @rq_flags: flags for ->rq_flags
PATCH 2/21 libsas: Only abort commands from inside the error handler
In reply to Bart Van AsscheAccording to the information I found in patch commit descriptions, for SATA devices commands must be aborted from inside the libsas error handler. Check host->ehandler to determine whether or not running inside the error handler since host->host_eh_scheduled != 0 indicates that the SCSI error handler has been scheduled but does not mean that is already running. This patch restores code that was removed by commit 909657615d9b ("scsi: libsas:
allow async aborts").
--- drivers/scsi/libsas/sas_scsi_host.c | 5 ++++- include/scsi/libsas.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-)
drivers/scsi/libsas/sas_scsi_host.c +4 -1
@@ -462,6 +462,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd)int res =TMF_RESP_FUNC_FAILED ;struct sas_task *task =TO_SAS_TASK (cmd);struct Scsi_Host *host = cmd->device->host; +struct sas_ha_struct *ha =SHOST_TO_SAS_HA (host);struct domain_device *dev =cmd_to_domain_dev (cmd);struct sas_internal *i =to_sas_internal (host->transportt);unsigned long flags;
@@ -471,7 +472,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd)spin_lock_irqsave (host->host_lock, flags);/* We cannot do async aborts for SATA devices */ -if (dev_is_sata (dev) && !host->host_eh_scheduled) { +if (dev_is_sata (dev) && !ha->eh_running) {spin_unlock_irqrestore (host->host_lock, flags);return FAILED ; }
@@ -731,6 +732,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) tries++; retry = true;spin_lock_irq (shost->host_lock); + ha->eh_running = true;list_splice_init (&shost->eh_cmd_q, &eh_work_q);spin_unlock_irq (shost->host_lock);
@@ -767,6 +769,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)/* check if any new eh work was scheduled during the last run */ spin_lock_irq (&ha->lock); + ha->eh_running = false;if (ha->eh_active ==0 ) { shost->host_eh_scheduled =0 ; retry = false;
include/scsi/libsas.h +1 -0
@@ -364,6 +364,7 @@ struct sas_ha_struct {struct mutex drain_mutex;unsigned long state;spinlock_t lock; +bool eh_running;int eh_active;wait_queue_head_t eh_wait_q;struct list_head eh_dev_q;
Jason Yan
reviewerRe: [PATCH 02/21] libsas: Only abort commands from inside the error handler
Hi Bart,
Quoted 33 lines · Bart Van Assche
According to the information I found in patch commit descriptions, for SATA devices commands must be aborted from inside the libsas error handler. Check
host->ehandlerto determine whether or not running inside the error handler sincehost->host_eh_scheduled!= 0 indicates that the SCSI error handler has been scheduled but does not mean that is already running. This patch restores code that was removed by commit909657615d9b("scsi: libsas:
allow async aborts").Cc Hannes Reinecke <[email protected]>Cc Christoph Hellwig <[email protected]>Cc Ming Lei <[email protected]>Cc John Garry <[email protected]>Cc Yves-Alexis Perez <[email protected]>Fixes c9f926000fe3 ("scsi: libsas: Disable asynchronous aborts for SATA devices")Signed-off-by Bart Van Assche <[email protected]>--- drivers/scsi/libsas/sas_scsi_host.c | 5 ++++- include/scsi/libsas.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-)drivers/scsi/libsas/sas_scsi_host.c +1
-0@@ -462,6 +462,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd)int res =TMF_RESP_FUNC_FAILED ;struct sas_task *task =TO_SAS_TASK (cmd);struct Scsi_Host *host = cmd->device->host; +struct sas_ha_struct *ha =SHOST_TO_SAS_HA (host);struct domain_device *dev =cmd_to_domain_dev (cmd);struct sas_internal *i =to_sas_internal (host->transportt);unsigned long flags;
drivers/scsi/libsas/sas_scsi_host.c int sas_eh_abort_handler(struct scsi_cmnd *cmd) · line 478
Quoted 8 lines
drivers/scsi/libsas/sas_scsi_host.c +1
-1@@ -471,7 +472,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd)spin_lock_irqsave (host->host_lock, flags);/* We cannot do async aborts for SATA devices */ -if (dev_is_sata (dev) && !host->host_eh_scheduled) { +if (dev_is_sata (dev) && !ha->eh_running) {spin_unlock_irqrestore (host->host_lock, flags);return FAILED ; }
No idea why sas_eh_abort_handler() is only used by isci. The other libsas drivers just let the error handler do the aborting work. So my question is can the isci driver delete this callback and let the error handler do this? If so, then we cann remove this function directly.
Thanks,
Jason
Quoted 30 lines
drivers/scsi/libsas/sas_scsi_host.c +2
-0@@ -731,6 +732,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) tries++; retry = true;spin_lock_irq (shost->host_lock); + ha->eh_running = true;list_splice_init (&shost->eh_cmd_q, &eh_work_q);spin_unlock_irq (shost->host_lock);@@ -767,6 +769,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)/* check if any new eh work was scheduled during the last run */ spin_lock_irq (&ha->lock); + ha->eh_running = false;if (ha->eh_active ==0 ) { shost->host_eh_scheduled =0 ; retry = false;include/scsi/libsas.h +1
-0@@ -364,6 +364,7 @@ struct sas_ha_struct {struct mutex drain_mutex;unsigned long state;spinlock_t lock; +bool eh_running;int eh_active;wait_queue_head_t eh_wait_q;struct list_head eh_dev_q;.
Re: [PATCH 02/21] libsas: Only abort commands from inside the error handler
Quoted 4 lines · Jason Yan
No idea why
sas_eh_abort_handler()is only used by isci. The other libsas drivers just let the error handler do the aborting work. So my question is can the isci driver delete this callback and let the error handler do this? If so, then we cann remove this function directly.
Hmm ... I think that's a question for an isci expert. Unfortunately I'm not familiar with the isci driver myself.
Thanks,
Bart.
Re: [PATCH 02/21] libsas: Only abort commands from inside the error handler
In reply to Jason YanQuoted 41 lines · Jason Yan
Hi Bart,
Quoted 38 lines · Bart Van Assche
According to the information I found in patch commit descriptions, for SATA devices commands must be aborted from inside the libsas error handler. Check
host->ehandlerto determine whether or not running inside the error handler sincehost->host_eh_scheduled!= 0 indicates that the SCSI error handler has been scheduled but does not mean that is already running. This patch restores code that was removed by commit909657615d9b("scsi: libsas:
allow async aborts").Cc Hannes Reinecke <[email protected]>Cc Christoph Hellwig <[email protected]>Cc Ming Lei <[email protected]>Cc John Garry <[email protected]>Cc Yves-Alexis Perez <[email protected]>Fixes c9f926000fe3 ("scsi: libsas: Disable asynchronous aborts for SATA devices")Signed-off-by Bart Van Assche <[email protected]>---
drivers/scsi/libsas/sas_scsi_host.c| 5 ++++-
include/scsi/libsas.h | 1 +2 files changed, 5 insertions(+), 1 deletion(-)drivers/scsi/libsas/sas_scsi_host.c +2
-1@@ -462,6 +462,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd) int res = TMF_RESP_FUNC_FAILED; struct sas_task *task = TO_SAS_TASK(cmd); struct Scsi_Host *host = cmd->device->host; + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(host); struct domain_device *dev = cmd_to_domain_dev(cmd); struct sas_internal *i = to_sas_internal(host->transportt); unsigned long flags;@@ -471,7 +472,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd) spin_lock_irqsave(host->host_lock, flags); /* We cannot do async aborts for SATA devices */ - if (dev_is_sata(dev) && !host->host_eh_scheduled) { + if (dev_is_sata(dev) && !ha->eh_running) { spin_unlock_irqrestore(host->host_lock, flags);
Quoted 9 lines
drivers/scsi/libsas/sas_scsi_host.c int sas_eh_abort_handler(struct scsi_cmnd *cmd) · line 478
Quoted 2 lines
drivers/scsi/libsas/sas_scsi_host.c +0
-0return FAILED; }No idea why
sas_eh_abort_handler()is only used by isci. The other libsas drivers just let the error handler do the aborting work. So my question is can the isci driver delete this callback and let the error handler do this? If so, then we cann remove this function directly.
That, indeed, is a good point. SATA commands are being handled by the sas_ata_strategy_handler (as they don't really match the SAM logic wrt TMF). And actually there is no 'abort' command on SATA; the best you can do is 'abort queue', but that's more like an 'ABORT TASK SET' in SAM. So either way that callback is pointless.
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Kernel Storage Architect [email protected] +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
PATCH 3/21 Clear host_eh_scheduled from inside the SCSI error handler
In reply to Bart Van AsscheThe current protocol for scheduling the SCSI error handler explicitly is as follows:
1. The LLD registers a transport layer that defines a eh_strategy_handler.
2. The LLD observes an error, sets variables that indicate the nature of the error and calls scsi_schedule_eh(). Currently only the ATA core and libsas use scsi_schedule_eh().
3. scsi_schedule_eh() increments host_eh_scheduled.
4. The SCSI error handling thread wakes up and invokes eh_strategy_handler.
5. After all errors have been handled and before the eh_strategy_handler implementation returns, host_eh_scheduled is cleared. This must be done in such a way that all errors that happened while the error handler was running are either handled or result in rerunning the error handler.
Making LLDs responsible for clearing host_eh_scheduled is error prone. Hence clear host_eh_scheduled from inside the SCSI error handler. A side effect of this patch is that if scsi_schedule_eh() is called while the SCSI error handler is active that it will be reactivated immediately.
--- drivers/scsi/scsi_error.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/scsi/scsi_error.c +7 -0
@@ -2242,6 +2242,13 @@ int scsi_error_handler(void *data)continue ; } +/* +* Clear host_eh_scheduled before handling any errors such that +* calling scsi_schedule_eh() while errors are being handled +* causes the error handler to be rerun. +*/ + shost->host_eh_scheduled =0 ; +if (shost->transportt->eh_strategy_handler) shost->transportt->eh_strategy_handler (shost);else
PATCH 4/21 libsas: Stop clearing host_eh_scheduled from the error handler
In reply to Bart Van AsscheNow that the caller of sas_scsi_recover_host(), namely scsi_error_handler(), clears host_eh_scheduled, remove the assignment from sas_scsi_recover_host() that clears this member variable.
--- drivers/scsi/libsas/sas_scsi_host.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/scsi/libsas/sas_scsi_host.c +1 -3
@@ -770,10 +770,8 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)/* check if any new eh work was scheduled during the last run */ spin_lock_irq (&ha->lock); ha->eh_running = false; -if (ha->eh_active ==0 ) { - shost->host_eh_scheduled =0 ; +if (ha->eh_active ==0 ) retry = false; - }spin_unlock_irq (&ha->lock);if (retry)
PATCH 5/21 ata: Stop clearing host_eh_scheduled from error handlers
In reply to Bart Van AsscheNow that the caller of sas_ata_strategy_handler() clears host_eh_scheduled, remove the code from the ATA core that that clears host_eh_scheduled.
--- drivers/ata/libata-core.c | 2 -- drivers/ata/libata-eh.c | 30 +++--------------------------- include/linux/libata.h | 1 - 3 files changed, 3 insertions(+), 30 deletions(-)
drivers/ata/libata-core.c +0 -2
@@ -69,7 +69,6 @@ const struct ata_port_operations ata_base_port_ops = { .postreset = ata_std_postreset, .error_handler = ata_std_error_handler, .sched_eh = ata_std_sched_eh, - .end_eh = ata_std_end_eh, };const struct ata_port_operations sata_port_ops = {
@@ -6419,7 +6418,6 @@ struct ata_port_operations ata_dummy_port_ops = { .qc_issue = ata_dummy_qc_issue, .error_handler = ata_dummy_error_handler, .sched_eh = ata_std_sched_eh, - .end_eh = ata_std_end_eh, };EXPORT_SYMBOL_GPL (ata_dummy_port_ops);
drivers/ata/libata-eh.c +3 -27
@@ -724,12 +724,9 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)ata_for_each_link (link, ap,HOST_FIRST )memset (&link->eh_info,0 ,sizeof (link->eh_info)); -/* end eh (clear host_eh_scheduled) while holding -* ap->lock such that if exception occurs after this -* point but before EH completion, SCSI midlayer will -* re-initiate EH. -*/ - ap->ops->end_eh (ap); +/* end eh while holding ap->lock */ +if (ap->ops->end_eh) + ap->ops->end_eh (ap);spin_unlock_irqrestore (ap->lock, flags);ata_eh_release (ap);
@@ -936,27 +933,6 @@ void ata_std_sched_eh(struct ata_port *ap) }EXPORT_SYMBOL_GPL (ata_std_sched_eh); -/** -* ata_std_end_eh - non-libsas ata_ports complete eh with this common routine -* @ap: ATA port to end EH for -* -* In the libata object model there is a 1:1 mapping of ata_port to -* shost, so host fields can be directly manipulated under ap->lock, in -* the libsas case we need to hold a lock at the ha->level to coordinate -* these events. -* -* LOCKING: -* spin_lock_irqsave(host lock) -*/ -void ata_std_end_eh (struct ata_port *ap) -{ -struct Scsi_Host *host = ap->scsi_host; - - host->host_eh_scheduled =0 ; -} -EXPORT_SYMBOL (ata_std_end_eh); - -/** * ata_port_schedule_eh - schedule error handling without a qc * @ap: ATA port to schedule EH for
include/linux/libata.h +0 -1
@@ -1356,7 +1356,6 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_postreset_fn_t postreset);extern void ata_std_error_handler (struct ata_port *ap);extern void ata_std_sched_eh (struct ata_port *ap); -extern void ata_std_end_eh (struct ata_port *ap);extern int ata_link_nr_enabled (struct ata_link *link);/*
PATCH 6/21 ufs: Reduce power management code duplication
In reply to Bart Van AsscheMove the dev_get_drvdata() calls into the ufshcd_{system,runtime}_*() functions. Remove ufshcd_runtime_idle() since it is empty. This patch does not change any functionality.
--- drivers/scsi/ufs/cdns-pltfrm.c | 7 ++-- drivers/scsi/ufs/tc-dwc-g210-pci.c | 32 ++---------------- drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 7 ++-- drivers/scsi/ufs/ufs-exynos.c | 7 ++-- drivers/scsi/ufs/ufs-hisi.c | 7 ++-- drivers/scsi/ufs/ufs-mediatek.c | 7 ++-- drivers/scsi/ufs/ufs-qcom.c | 7 ++-- drivers/scsi/ufs/ufshcd-pci.c | 48 ++------------------------- drivers/scsi/ufs/ufshcd-pltfrm.c | 47 -------------------------- drivers/scsi/ufs/ufshcd-pltfrm.h | 18 ---------- drivers/scsi/ufs/ufshcd.c | 41 ++++++++++++----------- drivers/scsi/ufs/ufshcd.h | 9 +++-- 12 files changed, 41 insertions(+), 196 deletions(-)
drivers/scsi/ufs/cdns-pltfrm.c +2 -5
@@ -318,11 +318,8 @@ static int cdns_ufs_pltfrm_remove(struct platform_device *pdev) }static const struct dev_pm_ops cdns_ufs_dev_pm_ops = { - .suspend = ufshcd_pltfrm_suspend, - .resume = ufshcd_pltfrm_resume, - .runtime_suspend = ufshcd_pltfrm_runtime_suspend, - .runtime_resume = ufshcd_pltfrm_runtime_resume, - .runtime_idle = ufshcd_pltfrm_runtime_idle, + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) +SET_RUNTIME_PM_OPS (ufshcd_runtime_suspend, ufshcd_runtime_resume,NULL ) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, };
drivers/scsi/ufs/tc-dwc-g210-pci.c +2 -30
@@ -23,31 +23,6 @@ static int tc_type = TC_G210_INV;module_param (tc_type, int,0 );MODULE_PARM_DESC (tc_type,"Test Chip Type (20 = 20-bit, 40 = 40-bit)" ); -static int tc_dwc_g210_pci_suspend (struct device *dev) -{ -return ufshcd_system_suspend (dev_get_drvdata (dev)); -} - -static int tc_dwc_g210_pci_resume (struct device *dev) -{ -return ufshcd_system_resume (dev_get_drvdata (dev)); -} - -static int tc_dwc_g210_pci_runtime_suspend (struct device *dev) -{ -return ufshcd_runtime_suspend (dev_get_drvdata (dev)); -} - -static int tc_dwc_g210_pci_runtime_resume (struct device *dev) -{ -return ufshcd_runtime_resume (dev_get_drvdata (dev)); -} - -static int tc_dwc_g210_pci_runtime_idle (struct device *dev) -{ -return ufshcd_runtime_idle (dev_get_drvdata (dev)); -} -/* * struct ufs_hba_dwc_vops - UFS DWC specific variant operations */
@@ -143,11 +118,8 @@ tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) }static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = { - .suspend = tc_dwc_g210_pci_suspend, - .resume = tc_dwc_g210_pci_resume, - .runtime_suspend = tc_dwc_g210_pci_runtime_suspend, - .runtime_resume = tc_dwc_g210_pci_runtime_resume, - .runtime_idle = tc_dwc_g210_pci_runtime_idle, + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) +SET_RUNTIME_PM_OPS (ufshcd_runtime_suspend, ufshcd_runtime_resume,NULL ) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, };
drivers/scsi/ufs/tc-dwc-g210-pltfrm.c +2 -5
@@ -84,11 +84,8 @@ static int tc_dwc_g210_pltfm_remove(struct platform_device *pdev) }static const struct dev_pm_ops tc_dwc_g210_pltfm_pm_ops = { - .suspend = ufshcd_pltfrm_suspend, - .resume = ufshcd_pltfrm_resume, - .runtime_suspend = ufshcd_pltfrm_runtime_suspend, - .runtime_resume = ufshcd_pltfrm_runtime_resume, - .runtime_idle = ufshcd_pltfrm_runtime_idle, + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) +SET_RUNTIME_PM_OPS (ufshcd_runtime_suspend, ufshcd_runtime_resume,NULL ) };static struct platform_driver tc_dwc_g210_pltfm_driver = {
drivers/scsi/ufs/ufs-exynos.c +2 -5
@@ -1287,11 +1287,8 @@ static const struct of_device_id exynos_ufs_of_match[] = { };static const struct dev_pm_ops exynos_ufs_pm_ops = { - .suspend = ufshcd_pltfrm_suspend, - .resume = ufshcd_pltfrm_resume, - .runtime_suspend = ufshcd_pltfrm_runtime_suspend, - .runtime_resume = ufshcd_pltfrm_runtime_resume, - .runtime_idle = ufshcd_pltfrm_runtime_idle, + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) +SET_RUNTIME_PM_OPS (ufshcd_runtime_suspend, ufshcd_runtime_resume,NULL ) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, };
drivers/scsi/ufs/ufs-hisi.c +2 -5
@@ -569,11 +569,8 @@ static int ufs_hisi_remove(struct platform_device *pdev) }static const struct dev_pm_ops ufs_hisi_pm_ops = { - .suspend = ufshcd_pltfrm_suspend, - .resume = ufshcd_pltfrm_resume, - .runtime_suspend = ufshcd_pltfrm_runtime_suspend, - .runtime_resume = ufshcd_pltfrm_runtime_resume, - .runtime_idle = ufshcd_pltfrm_runtime_idle, + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) +SET_RUNTIME_PM_OPS (ufshcd_runtime_suspend, ufshcd_runtime_resume,NULL ) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, };
drivers/scsi/ufs/ufs-mediatek.c +2 -5
@@ -1123,11 +1123,8 @@ static int ufs_mtk_remove(struct platform_device *pdev) }static const struct dev_pm_ops ufs_mtk_pm_ops = { - .suspend = ufshcd_pltfrm_suspend, - .resume = ufshcd_pltfrm_resume, - .runtime_suspend = ufshcd_pltfrm_runtime_suspend, - .runtime_resume = ufshcd_pltfrm_runtime_resume, - .runtime_idle = ufshcd_pltfrm_runtime_idle, + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) +SET_RUNTIME_PM_OPS (ufshcd_runtime_suspend, ufshcd_runtime_resume,NULL ) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, };
drivers/scsi/ufs/ufs-qcom.c +2 -5
@@ -1546,11 +1546,8 @@ MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match);#endif static const struct dev_pm_ops ufs_qcom_pm_ops = { - .suspend = ufshcd_pltfrm_suspend, - .resume = ufshcd_pltfrm_resume, - .runtime_suspend = ufshcd_pltfrm_runtime_suspend, - .runtime_resume = ufshcd_pltfrm_runtime_resume, - .runtime_idle = ufshcd_pltfrm_runtime_idle, + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) +SET_RUNTIME_PM_OPS (ufshcd_runtime_suspend, ufshcd_runtime_resume,NULL ) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, };
drivers/scsi/ufs/ufshcd-pci.c +2 -46
60 lines not on this page · raw message
drivers/scsi/ufs/ufshcd-pltfrm.c +0 -47
53 lines not on this page · raw message
drivers/scsi/ufs/ufshcd-pltfrm.h +0 -18
@@ -33,22 +33,4 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, const struct ufs_hba_variant_ops *vops);void ufshcd_pltfrm_shutdown (struct platform_device *pdev); -#ifdef CONFIG_PM - -int ufshcd_pltfrm_suspend (struct device *dev); -int ufshcd_pltfrm_resume (struct device *dev); -int ufshcd_pltfrm_runtime_suspend (struct device *dev); -int ufshcd_pltfrm_runtime_resume (struct device *dev); -int ufshcd_pltfrm_runtime_idle (struct device *dev); - -#else /* !CONFIG_PM */ - -#define ufshcd_pltfrm_suspend NULL -#define ufshcd_pltfrm_resume NULL -#define ufshcd_pltfrm_runtime_suspend NULL -#define ufshcd_pltfrm_runtime_resume NULL -#define ufshcd_pltfrm_runtime_idle NULL - -#endif /* CONFIG_PM */ -#endif /* UFSHCD_PLTFRM_H_ */
drivers/scsi/ufs/ufshcd.c +21 -20
94 lines not on this page · raw message
drivers/scsi/ufs/ufshcd.h +4 -5
@@ -1009,11 +1009,10 @@ static inline u8 ufshcd_wb_get_query_index(struct ufs_hba *hba)return 0 ; } -extern int ufshcd_runtime_suspend (struct ufs_hba *hba); -extern int ufshcd_runtime_resume (struct ufs_hba *hba); -extern int ufshcd_runtime_idle (struct ufs_hba *hba); -extern int ufshcd_system_suspend (struct ufs_hba *hba); -extern int ufshcd_system_resume (struct ufs_hba *hba); +extern int ufshcd_runtime_suspend (struct device *dev); +extern int ufshcd_runtime_resume (struct device *dev); +extern int ufshcd_system_suspend (struct device *dev); +extern int ufshcd_system_resume (struct device *dev);extern int ufshcd_shutdown (struct ufs_hba *hba); extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba, int agreed_gear,
RE: [PATCH 06/21] ufs: Reduce power management code duplication
Quoted 11 lines
Move the
dev_get_drvdata()calls into the ufshcd_{system,runtime}_*() functions. Removeufshcd_runtime_idle()since it is empty. This patch does not change any functionality.Cc Adrian Hunter <[email protected]>Cc Stanley Chu <[email protected]>Cc Can Guo <[email protected]>Cc Asutosh Das <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
Thanks for this cleanup.
Avri
PATCH 7/21 ufs: Only include power management code if necessary
In reply to Bart Van AsscheThis patch slightly reduces the UFS driver size if built with power management support disabled.
--- drivers/scsi/ufs/ufshcd.c | 8 ++++++++ drivers/scsi/ufs/ufshcd.h | 4 ++++ 2 files changed, 12 insertions(+)
drivers/scsi/ufs/ufshcd.c +8 -0
@@ -8736,6 +8736,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)usleep_range (5000 ,5100 ); } +#ifdef CONFIG_PM static int ufshcd_vreg_set_hpm (struct ufs_hba *hba) {int ret =0 ;
@@ -8763,6 +8764,7 @@ static int ufshcd_vreg_set_hpm(struct ufs_hba *hba) out: return ret; } +#endif /* CONFIG_PM */ static void ufshcd_hba_vreg_set_lpm (struct ufs_hba *hba) {
@@ -9165,6 +9167,7 @@ static int ufshcd_suspend(struct ufs_hba *hba)return ret; } +#ifdef CONFIG_PM /** * ufshcd_resume - helper function for resume operations * @hba: per adapter instance
@@ -9202,7 +9205,9 @@ static int ufshcd_resume(struct ufs_hba *hba)ufshcd_update_evt_hist (hba,UFS_EVT_RESUME_ERR , (u32 )ret); return ret; } +#endif /* CONFIG_PM */ +#ifdef CONFIG_PM_SLEEP /** * ufshcd_system_suspend - system suspend callback * @dev: Device associated with the UFS controller.
@@ -9258,7 +9263,9 @@ int ufshcd_system_resume(struct device *dev) return ret; }EXPORT_SYMBOL (ufshcd_system_resume); +#endif /* CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM /** * ufshcd_runtime_suspend - runtime suspend callback * @dev: Device associated with the UFS controller.
@@ -9306,6 +9313,7 @@ int ufshcd_runtime_resume(struct device *dev) return ret; }EXPORT_SYMBOL (ufshcd_runtime_resume); +#endif /* CONFIG_PM */ /** * ufshcd_shutdown - shutdown routine
drivers/scsi/ufs/ufshcd.h +4 -0
@@ -1009,10 +1009,14 @@ static inline u8 ufshcd_wb_get_query_index(struct ufs_hba *hba)return 0 ; } +#ifdef CONFIG_PM extern int ufshcd_runtime_suspend (struct device *dev);extern int ufshcd_runtime_resume (struct device *dev); +#endif +#ifdef CONFIG_PM_SLEEP extern int ufshcd_system_suspend (struct device *dev);extern int ufshcd_system_resume (struct device *dev); +#endif extern int ufshcd_shutdown (struct ufs_hba *hba); extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba, int agreed_gear,
RE: [PATCH 07/21] ufs: Only include power management code if necessary
Quoted 20 lines
This patch slightly reduces the UFS driver size if built with power management support disabled.
Cc Adrian Hunter <[email protected]>Cc Stanley Chu <[email protected]>Cc Can Guo <[email protected]>Cc Asutosh Das <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>--- drivers/scsi/ufs/ufshcd.c | 8 ++++++++ drivers/scsi/ufs/ufshcd.h | 4 ++++ 2 files changed, 12 insertions(+)drivers/scsi/ufs/ufshcd.c +0
-0
drivers/scsi/ufs/ufshcd.c static void ufshcd_vreg_set_lpm(struct ufs_hba · line 8740
Quoted 5 lines
drivers/scsi/ufs/ufshcd.c +1
-0@@ -8736,6 +8736,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)usleep_range (5000 ,5100 ); } +#ifdef CONFIG_PM
Maybe move this few lines up to include ufshcd_vreg_set_lpm as well?
Are there any ufs platforms that doesn't use pm management? Automotive platforms maybe?
Thanks,
Avri
Quoted 68 lines
drivers/scsi/ufs/ufshcd.c +0
-0static int ufshcd_vreg_set_hpm (struct ufs_hba *hba) {int ret = 0;drivers/scsi/ufs/ufshcd.c +1
-0@@ -8763,6 +8764,7 @@ static int ufshcd_vreg_set_hpm(struct ufs_hba *hba) out: return ret; } +#endif /* CONFIG_PM */ static void ufshcd_hba_vreg_set_lpm (struct ufs_hba *hba){
drivers/scsi/ufs/ufshcd.c +6
-0@@ -9165,6 +9167,7 @@ static int ufshcd_suspend(struct ufs_hba *hba)return ret; } +#ifdef CONFIG_PM /** * ufshcd_resume - helper function for resume operations * @hba: per adapter instance @@ -9202,7 +9205,9 @@ static int ufshcd_resume(struct ufs_hba *hba)ufshcd_update_evt_hist (hba,UFS_EVT_RESUME_ERR , (u32 )ret); return ret; } +#endif /* CONFIG_PM */ +#ifdef CONFIG_PM_SLEEP /** * ufshcd_system_suspend - system suspend callback * @dev: Device associated with the UFS controller. @@ -9258,7 +9263,9 @@ int ufshcd_system_resume(struct device *dev) return ret; }EXPORT_SYMBOL (ufshcd_system_resume); +#endif /* CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM /** * ufshcd_runtime_suspend - runtime suspend callback * @dev: Device associated with the UFS controller. @@ -9306,6 +9313,7 @@ int ufshcd_runtime_resume(struct device *dev) return ret; }EXPORT_SYMBOL (ufshcd_runtime_resume); +#endif /* CONFIG_PM */ /** * ufshcd_shutdown - shutdown routine drivers/scsi/ufs/ufshcd.h +4
-0@@ -1009,10 +1009,14 @@ static inline u8 ufshcd_wb_get_query_index(struct ufs_hba *hba) return 0; } +#ifdef CONFIG_PM extern int ufshcd_runtime_suspend (struct device *dev);extern int ufshcd_runtime_resume (struct device *dev); +#endif +#ifdef CONFIG_PM_SLEEP extern int ufshcd_system_suspend (struct device *dev);extern int ufshcd_system_resume (struct device *dev); +#endif extern int ufshcd_shutdown (struct ufs_hba *hba); extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,int
agreed_gear,
Re: [PATCH 07/21] ufs: Only include power management code if necessary
Quoted 11 lines · Avri Altman
drivers/scsi/ufs/ufshcd.c static void ufshcd_vreg_set_lpm(struct ufs_hba · line 8740
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +1
-0@@ -8736,6 +8736,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)usleep_range (5000 ,5100 ); } +#ifdef CONFIG_PM Maybe move this few lines up to include
ufshcd_vreg_set_lpmas well?
The following call chain requires that ufshcd_vreg_set_lpm() is always
available: ufshcd_shutdown() -> ufshcd_suspend() -> ufshcd_vreg_set_lpm().
Quoted 2 lines
Are there any ufs platforms that doesn't use pm management? Automotive platforms maybe?
I'm not sure whether there is any platform on which UFS PM is disabled. My purpose with this patch is to document which code is not used if power management is disabled.
Bart.
RE: [PATCH 07/21] ufs: Only include power management code if necessary
In reply to Bart Van AsscheQuoted 10 lines
This patch slightly reduces the UFS driver size if built with power management support disabled.
Cc Adrian Hunter <[email protected]>Cc Stanley Chu <[email protected]>Cc Can Guo <[email protected]>Cc Asutosh Das <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
PATCH 8/21 ufs: Rename the second ufshcd_probe_hba() argument
In reply to Bart Van AsscheRename the second argument of ufshcd_probe_hba() such that the name of that argument reflects its purpose instead of how the function is called. See also commit 1b9e21412f72 ("scsi: ufs: Split ufshcd_probe_hba() based on its called flow").
--- drivers/scsi/ufs/ufshcd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/ufs/ufshcd.c +4 -4
@@ -7964,13 +7964,13 @@ static int ufshcd_clear_ua_wluns(struct ufs_hba *hba) }/** -* ufshcd_probe_hba - probe hba to detect device and initialize +* ufshcd_probe_hba - probe hba to detect device and initialize it * @hba: per-adapter instance -* @async: asynchronous execution or not +* @init_dev_params: whether or not to call ufshcd_device_params_init(). * * Execute link-startup and verify device initialization */ -static int ufshcd_probe_hba (struct ufs_hba *hba,bool async) +static int ufshcd_probe_hba (struct ufs_hba *hba,bool init_dev_params) {int ret;unsigned long flags;
@@ -8002,7 +8002,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)* Initialize UFS device parameters used by driver, these * parameters are associated with UFS descriptors. */ -if (async) { +if (init_dev_params) { ret =ufshcd_device_params_init (hba);if (ret) goto out;
PATCH 9/21 ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate
In reply to Bart Van AsscheFrom Documentation/scheduler/completion.rst: "When a completion is declared as a local variable within a function, then the initialization should always use DECLARE_COMPLETION_ONSTACK() explicitly, not just to make lockdep happy, but also to make it clear that limited scope had been considered and is intentional."
--- drivers/scsi/ufs/ufshcd.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +3 -6
@@ -2949,11 +2949,11 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, enum dev_cmd_type cmd_type, int timeout) {struct request_queue *q = hba->cmd_queue; +DECLARE_COMPLETION_ONSTACK (wait);struct request *req;struct ufshcd_lrb *lrbp;int err;int tag; -struct completion wait;down_read (&hba->clk_scaling_lock);
@@ -2975,7 +2975,6 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, goto out; } -init_completion (&wait); lrbp = &hba->lrb[tag];WARN_ON (lrbp->cmd); err =ufshcd_compose_dev_cmd (hba, lrbp, cmd_type, tag);
@@ -3980,14 +3979,13 @@ EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr);*/ static int ufshcd_uic_pwr_ctrl (struct ufs_hba *hba,struct uic_command *cmd) { -struct completion uic_async_done; +DECLARE_COMPLETION_ONSTACK (uic_async_done);unsigned long flags;u8 status;int ret;bool reenable_intr = false;mutex_lock (&hba->uic_cmd_mutex); -init_completion (&uic_async_done);ufshcd_add_delay_before_dme_cmd (hba);spin_lock_irqsave (hba->host->host_lock, flags);
@@ -6660,11 +6658,11 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba, enum query_opcode desc_op) {struct request_queue *q = hba->cmd_queue; +DECLARE_COMPLETION_ONSTACK (wait);struct request *req;struct ufshcd_lrb *lrbp;int err =0 ;int tag; -struct completion wait;u8 upiu_flags;down_read (&hba->clk_scaling_lock);
@@ -6682,7 +6680,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba, goto out; } -init_completion (&wait); lrbp = &hba->lrb[tag];WARN_ON (lrbp->cmd); lrbp->cmd =NULL ;
RE: [PATCH 09/21] ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate
Quoted 8 lines
From
Documentation/scheduler/completion.rst: "When a completion is declared
as a local variable within a function, then the initialization should always useDECLARE_COMPLETION_ONSTACK()explicitly, not just to make lockdep happy, but also to make it clear that limited scope had been considered and is intentional."
Quoted 6 lines
Cc Adrian Hunter <[email protected]>Cc Stanley Chu <[email protected]>Cc Can Guo <[email protected]>Cc Asutosh Das <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
PATCH 10/21 ufs: Remove ufshcd_valid_tag()
In reply to Bart Van Asschescsi_add_host() allocates shost->can_queue tags. ufshcd_init() sets shost->can_queue to hba->nutrs. In other words, we know that tag values will be in the range [0, hba->nutrs). Hence remove the checks that verify that blk_get_request() returns a tag in this range. This check was introduced by commit 14497328b6a6 ("scsi: ufs: verify command tag validity").
--- drivers/scsi/ufs/ufshcd.c | 40 ++++++--------------------------------- 1 file changed, 6 insertions(+), 34 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -34
@@ -253,11 +253,6 @@ static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);static void ufshcd_hba_vreg_set_lpm (struct ufs_hba *hba);static void ufshcd_hba_vreg_set_hpm (struct ufs_hba *hba); -static inline bool ufshcd_valid_tag (struct ufs_hba *hba,int tag) -{ -return tag >=0 && tag < hba->nutrs; -} -static inline void ufshcd_enable_irq (struct ufs_hba *hba) {if (!hba->is_irq_enabled) {
@@ -2701,21 +2696,11 @@ static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)*/ static int ufshcd_queuecommand (struct Scsi_Host *host,struct scsi_cmnd *cmd) { +struct ufs_hba *hba =shost_priv (host); +int tag = cmd->request->tag;struct ufshcd_lrb *lrbp; -struct ufs_hba *hba; -int tag;int err =0 ; - hba =shost_priv (host); - - tag = cmd->request->tag; -if (!ufshcd_valid_tag (hba, tag)) { -dev_err (hba->dev, -"%s: invalid command tag %d: cmd=0x%p, cmd->request=0x%p" , - __func__, tag, cmd, cmd->request); -BUG (); - } -if (!down_read_trylock (&hba->clk_scaling_lock))return SCSI_MLQUEUE_HOST_BUSY ;
@@ -2968,7 +2953,6 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, goto out_unlock; } tag = req->tag; -WARN_ON_ONCE (!ufshcd_valid_tag (hba, tag));if (unlikely (test_bit (tag, &hba->outstanding_reqs))) { err = -EBUSY ;
@@ -6673,7 +6657,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba, goto out_unlock; } tag = req->tag; -WARN_ON_ONCE (!ufshcd_valid_tag (hba, tag));if (unlikely (test_bit (tag, &hba->outstanding_reqs))) { err = -EBUSY ;
@@ -6975,25 +6958,14 @@ static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag)*/ static int ufshcd_abort (struct scsi_cmnd *cmd) { -struct Scsi_Host *host; -struct ufs_hba *hba; +struct Scsi_Host *host = cmd->device->host; +struct ufs_hba *hba =shost_priv (host); +unsigned int tag = cmd->request->tag; +struct ufshcd_lrb *lrbp = &hba->lrb[tag];unsigned long flags; -unsigned int tag;int err =0 ; -struct ufshcd_lrb *lrbp;u32 reg; - host = cmd->device->host; - hba =shost_priv (host); - tag = cmd->request->tag; - lrbp = &hba->lrb[tag]; -if (!ufshcd_valid_tag (hba, tag)) { -dev_err (hba->dev, -"%s: invalid command tag %d: cmd=0x%p, cmd->request=0x%p" , - __func__, tag, cmd, cmd->request); -BUG (); - } -ufshcd_hold (hba, false); reg =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_DOOR_BELL );/* If command is already aborted/completed, return SUCCESS */
RE: [PATCH 10/21] ufs: Remove ufshcd_valid_tag()
Quoted 20 lines
scsi_add_host()allocatesshost->can_queuetags.ufshcd_init()setsshost->can_queuetohba->nutrs. In other words, we know that tag values will be in the range [0,hba->nutrs). Hence remove the checks that verify thatblk_get_request()returns a tag in this range. This check was introduced by commit14497328b6a6("scsi: ufs: verify command tag validity").Cc Alim Akhtar <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>static int
ufshcd_abort(struct scsi_cmnd *cmd)
{drivers/scsi/ufs/ufshcd.c +4
-2-struct Scsi_Host *host; -struct ufs_hba *hba; +struct Scsi_Host *host = cmd->device->host; +struct ufs_hba *hba =shost_priv (host); +unsigned int tag = cmd->request->tag; +struct ufshcd_lrb *lrbp = &hba->lrb[tag];
drivers/scsi/ufs/ufshcd.c static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag) · line 6989
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +0
-6unsigned long flags; -unsigned int tag;int err =0 ; -struct ufshcd_lrb *lrbp;u32 reg; - host = cmd->device->host; - hba =shost_priv (host); - tag = cmd->request->tag; - lrbp = &hba->lrb[tag];
lrbp is used below ?
if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) ...
Thanks,
Avri
Quoted 11 lines
drivers/scsi/ufs/ufshcd.c +0
-3-if (!ufshcd_valid_tag (hba, tag)) { - dev_err(hba->dev, - "%s: invalid command tag %d: cmd=0x%p, cmd-Quoted 1 line
request=0x%p",
drivers/scsi/ufs/ufshcd.c +0
-4- __func__, tag, cmd, cmd->request); -BUG (); - } -ufshcd_hold (hba, false); reg =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_DOOR_BELL );/* If command is already aborted/completed, return SUCCESS */
Re: [PATCH 10/21] ufs: Remove ufshcd_valid_tag()
Quoted 25 lines · Avri Altman
Quoted 25 lines
scsi_add_host()allocatesshost->can_queuetags.ufshcd_init()setsshost->can_queuetohba->nutrs. In other words, we know that tag values will be in the range [0,hba->nutrs). Hence remove the checks that verify thatblk_get_request()returns a tag in this range. This check was introduced by commit14497328b6a6("scsi: ufs: verify command tag validity").Cc Alim Akhtar <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>static int
ufshcd_abort(struct scsi_cmnd *cmd)
{drivers/scsi/ufs/ufshcd.c +4
-4-struct Scsi_Host *host; -struct ufs_hba *hba; +struct Scsi_Host *host = cmd->device->host; +struct ufs_hba *hba =shost_priv (host); +unsigned int tag = cmd->request->tag; +struct ufshcd_lrb *lrbp = &hba->lrb[tag];unsigned long flags; -unsigned int tag;int err =0 ; -struct ufshcd_lrb *lrbp;u32 reg;
Quoted 6 lines
drivers/scsi/ufs/ufshcd.c static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag) · line 6989
Quoted 4 lines
drivers/scsi/ufs/ufshcd.c +0
-4- host = cmd->device->host; - hba =shost_priv (host); - tag = cmd->request->tag; - lrbp = &hba->lrb[tag];lrbp is used below ?
if (lrbp->lun==UFS_UPIU_UFS_DEVICE_WLUN) ...
Hi Avri,
The lrbp assignment is preserved but it has been moved up to the declaration block.
Bart.
RE: [PATCH 10/21] ufs: Remove ufshcd_valid_tag()
Quoted 31 lines · Avri Altman
Quoted 29 lines
Quoted 29 lines
scsi_add_host()allocatesshost->can_queuetags.ufshcd_init()setsshost->can_queuetohba->nutrs. In other words, we know that tag values will be in the range [0,hba->nutrs). Hence remove the checks that verify thatblk_get_request()returns a tag in this range. This check was introduced by commit14497328b6a6("scsi: ufs: verify command tag validity").Cc Alim Akhtar <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>static int
ufshcd_abort(struct scsi_cmnd *cmd)
{drivers/scsi/ufs/ufshcd.c +4
-8-struct Scsi_Host *host; -struct ufs_hba *hba; +struct Scsi_Host *host = cmd->device->host; +struct ufs_hba *hba =shost_priv (host); +unsigned int tag = cmd->request->tag; +struct ufshcd_lrb *lrbp = &hba->lrb[tag];unsigned long flags; -unsigned int tag;int err =0 ; -struct ufshcd_lrb *lrbp;u32 reg; - host = cmd->device->host; - hba =shost_priv (host); - tag = cmd->request->tag; - lrbp = &hba->lrb[tag];
Quoted 7 lines
Quoted 2 lines
lrbp is used below ?
if (lrbp->lun==UFS_UPIU_UFS_DEVICE_WLUN) ...Hi Avri,
The lrbp assignment is preserved but it has been moved up to the declaration block.
Missed that - sorry.
Avri
Quoted 1 line
Bart.
RE: [PATCH 10/21] ufs: Remove ufshcd_valid_tag()
In reply to Bart Van AsscheQuoted 10 lines
scsi_add_host()allocatesshost->can_queuetags.ufshcd_init()setsshost->can_queuetohba->nutrs. In other words, we know that tag values will be in the range [0,hba->nutrs). Hence remove the checks that verify thatblk_get_request()returns a tag in this range. This check was introduced by commit14497328b6a6("scsi: ufs: verify command tag validity").Cc Alim Akhtar <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
PATCH 11/21 ufs: Verify UIC locking requirements at runtime
In reply to Bart Van AsscheInstead of documenting the locking requirements of the UIC code as comments, use lockdep_assert_held() such that lockdep verifies the lockdep requirements at runtime if lockdep is enabled.
--- drivers/scsi/ufs/ufshcd.c | 16 +++++++++------- drivers/scsi/ufs/ufshcd.h | 2 +- 2 files changed, 10 insertions(+), 8 deletions(-)
drivers/scsi/ufs/ufshcd.c +9 -7
@@ -2242,15 +2242,15 @@ static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba) }/** -* ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers +* ufshcd_dispatch_uic_cmd - Dispatch an UIC command to the Unipro layer * @hba: per adapter instance * @uic_cmd: UIC command -* -* Mutex must be held. */ static inline void ufshcd_dispatch_uic_cmd (struct ufs_hba *hba,struct uic_command *uic_cmd) { +lockdep_assert_held (&hba->uic_cmd_mutex); +WARN_ON (hba->active_uic_cmd); hba->active_uic_cmd = uic_cmd;
@@ -2268,11 +2268,10 @@ ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) }/** -* ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command +* ufshcd_wait_for_uic_cmd - Wait for completion of an UIC command * @hba: per adapter instance * @uic_cmd: UIC command * -* Must be called with mutex held. * Returns 0 only if success. */ static int
@@ -2281,6 +2280,8 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)int ret;unsigned long flags; +lockdep_assert_held (&hba->uic_cmd_mutex); +if (wait_for_completion_timeout (&uic_cmd->done,msecs_to_jiffies (UIC_CMD_TIMEOUT ))) { ret = uic_cmd->argument2 &MASK_UIC_COMMAND_RESULT ;
@@ -2310,14 +2311,15 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)* @uic_cmd: UIC command * @completion: initialize the completion only if this is set to true * -* Identical to ufshcd_send_uic_cmd() expect mutex. Must be called -* with mutex held and host_lock locked. * Returns 0 only if success. */ static int __ufshcd_send_uic_cmd (struct ufs_hba *hba,struct uic_command *uic_cmd,bool completion) { +lockdep_assert_held (&hba->uic_cmd_mutex); +lockdep_assert_held (hba->host->host_lock); +if (!ufshcd_ready_for_uic_cmd (hba)) {dev_err (hba->dev,"Controller not ready to accept UIC commands\n" );
drivers/scsi/ufs/ufshcd.h +1 -1
@@ -683,7 +683,7 @@ struct ufs_hba_monitor {* @priv: pointer to variant specific private data * @irq: Irq number of the controller * @active_uic_cmd: handle of active UIC command -* @uic_cmd_mutex: mutex for uic command +* @uic_cmd_mutex: mutex for UIC command * @tmf_tag_set: TMF tag set. * @tmf_queue: Used to allocate TMF tags. * @pwr_done: completion for power mode change
RE: [PATCH 11/21] ufs: Verify UIC locking requirements at runtime
Quoted 11 lines
Instead of documenting the locking requirements of the UIC code as comments,
uselockdep_assert_held()such that lockdep verifies the lockdep requirements at runtime if lockdep is enabled.Cc Adrian Hunter <[email protected]>Cc Stanley Chu <[email protected]>Cc Can Guo <[email protected]>Cc Asutosh Das <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
PATCH 12/21 ufs: Improve static type checking for the host controller state
In reply to Bart Van AsscheAssign a name to the enumeration type for UFS host controller states and remove the default clause from switch statements on this enumeration type to make the compiler warn about unhandled enumeration labels.
--- drivers/scsi/ufs/ufshcd.c | 15 --------------- drivers/scsi/ufs/ufshcd.h | 25 +++++++++++++++++++++++-- 2 files changed, 23 insertions(+), 17 deletions(-)
drivers/scsi/ufs/ufshcd.c +0 -15
@@ -128,15 +128,6 @@ enum { UFSHCD_CAN_QUEUE = 32, }; -/* UFSHCD states */ -enum { -UFSHCD_STATE_RESET , -UFSHCD_STATE_ERROR , -UFSHCD_STATE_OPERATIONAL , -UFSHCD_STATE_EH_SCHEDULED_FATAL , -UFSHCD_STATE_EH_SCHEDULED_NON_FATAL , -}; -/* UFSHCD error handling flags */ enum {UFSHCD_EH_IN_PROGRESS = (1 <<0 ),
@@ -2735,12 +2726,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)set_host_byte (cmd,DID_ERROR ); cmd->scsi_done (cmd); goto out; -default : -dev_WARN_ONCE (hba->dev,1 ,"%s: invalid state %d\n" , - __func__, hba->ufshcd_state); -set_host_byte (cmd,DID_BAD_TARGET ); - cmd->scsi_done (cmd); - goto out; } hba->req_abort_count =0 ;
drivers/scsi/ufs/ufshcd.h +23 -2
@@ -476,6 +476,27 @@ struct ufs_stats {struct ufs_event_hist event[UFS_EVT_CNT ]; }; +/** +* enum ufshcd_state - UFS host controller state +* @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command +* processing. +* @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process +* SCSI commands. +* @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled. +* SCSI commands may be submitted to the controller. +* @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail +* newly submitted SCSI commands with error code DID_BAD_TARGET. +* @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery +* failed. Fail all SCSI commands with error code DID_ERROR. +*/ +enum ufshcd_state { +UFSHCD_STATE_RESET , +UFSHCD_STATE_OPERATIONAL , +UFSHCD_STATE_EH_SCHEDULED_NON_FATAL , +UFSHCD_STATE_EH_SCHEDULED_FATAL , +UFSHCD_STATE_ERROR , +}; +enum ufshcd_quirks {/* Interrupt aggregation support is broken */ UFSHCD_QUIRK_BROKEN_INTR_AGGR =1 <<0 ,
@@ -687,7 +708,7 @@ struct ufs_hba_monitor {* @tmf_tag_set: TMF tag set. * @tmf_queue: Used to allocate TMF tags. * @pwr_done: completion for power mode change -* @ufshcd_state: UFSHCD states +* @ufshcd_state: UFSHCD state * @eh_flags: Error handling flags * @intr_mask: Interrupt Mask Bits * @ee_ctrl_mask: Exception event control mask
@@ -785,7 +806,7 @@ struct ufs_hba {struct mutex uic_cmd_mutex;struct completion *uic_async_done; -u32 ufshcd_state; +enum ufshcd_state ufshcd_state;u32 eh_flags;u32 intr_mask;u16 ee_ctrl_mask;/* Exception event mask */
PATCH 13/21 ufs: Remove several wmb() calls
In reply to Bart Van AsscheFrom arch/arm/include/asm/io.h
#define __iowmb() wmb()
[ ... ]
#define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); })From Documentation/memory-barriers.txt: "Note that, when using writel(), a prior wmb() is not needed to guarantee that the cache coherent memory writes have completed before writing to the MMIO region."
In other words, calling wmb() before writel() is not necessary. Hence remove the wmb() calls that precede a writel() call. Remove the wmb() calls that precede a ufshcd_send_command() call since the latter function uses writel(). Remove the wmb() call from ufshcd_wait_for_dev_cmd() since the following chain of events guarantees that the CPU will see up-to-date LRB values:
* UFS controller writes to host memory.
* UFS controller posts completion interrupt after the memory writes from the previous step are visible to the CPU.
* complete(hba->dev_cmd.complete) is called from the UFS interrupt handler.
* The wait_for_completion(hba->dev_cmd.complete) call in ufshcd_wait_for_dev_cmd() returns.
--- drivers/scsi/ufs/ufshcd.c | 11 ----------- 1 file changed, 11 deletions(-)
drivers/scsi/ufs/ufshcd.c +0 -11
@@ -2768,8 +2768,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)ufshcd_release (hba); goto out; } -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();ufshcd_send_command (hba, tag); out:
@@ -2879,8 +2877,6 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, time_left =wait_for_completion_timeout (hba->dev_cmd.complete,msecs_to_jiffies (max_timeout)); -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();spin_lock_irqsave (hba->host->host_lock, flags); hba->dev_cmd.complete =NULL ;if (likely (time_left)) {
@@ -2955,8 +2951,6 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, hba->dev_cmd.complete = &wait;ufshcd_add_query_upiu_trace (hba,UFS_QUERY_SEND , lrbp->ucd_req_ptr); -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();ufshcd_send_command (hba, tag); err =ufshcd_wait_for_dev_cmd (hba, lrbp, timeout);
@@ -6514,9 +6508,6 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba,/* send command to the controller */ __set_bit (task_tag, &hba->outstanding_tasks); -/* Make sure descriptors are ready before ringing the task doorbell */ -wmb (); -ufshcd_writel (hba,1 << task_tag,REG_UTP_TASK_REQ_DOOR_BELL );/* Make sure that doorbell is committed immediately */ wmb ();
@@ -6687,8 +6678,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba, hba->dev_cmd.complete = &wait;ufshcd_add_query_upiu_trace (hba,UFS_QUERY_SEND , lrbp->ucd_req_ptr); -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();ufshcd_send_command (hba, tag);/*
Re: [PATCH 13/21] ufs: Remove several wmb() calls
Quoted 29 lines · Bart Van Assche
From
arch/arm/include/asm/io.h#define __iowmb() wmb() [ ... ] #define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); })From
Documentation/memory-barriers.txt: "Note that, when usingwritel(), a
priorwmb()is not needed to guarantee that the cache coherent memory writes have completed before writing to the MMIO region."In other words, calling
wmb()beforewritel()is not necessary. Hence remove thewmb()calls that precede awritel()call. Remove thewmb()calls that precede aufshcd_send_command()call since the latter function useswritel(). Remove thewmb()call fromufshcd_wait_for_dev_cmd()since the following chain of events guarantees that the CPU will see up-to-date LRB values:
* UFS controller writes to host memory.
* UFS controller posts completion interrupt after the memory writes from the previous step are visible to the CPU.
*complete(hba->dev_cmd.complete)is called from the UFS interrupt handler.
* Thewait_for_completion(hba->dev_cmd.complete)call inufshcd_wait_for_dev_cmd()returns.Cc Adrian Hunter <[email protected]>Cc Stanley Chu <[email protected]>Cc Can Guo <[email protected]>Cc Asutosh Das <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
Quoted 4 lines
--- drivers/scsi/ufs/ufshcd.c | 11 ----------- 1 file changed, 11 deletions(-)
Hi Bart,
Did you verify this change? I think we've seen OCS errors which were fixed with the wmb() in queuecommand.
Quoted 51 lines
drivers/scsi/ufs/ufshcd.c +0
-11@@ -2768,8 +2768,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)ufshcd_release (hba); goto out; } -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();ufshcd_send_command (hba, tag); out:@@ -2879,8 +2877,6 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, time_left =wait_for_completion_timeout (hba->dev_cmd.complete,msecs_to_jiffies (max_timeout)); -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();spin_lock_irqsave (hba->host->host_lock, flags); hba->dev_cmd.complete =NULL ;if (likely (time_left)) {@@ -2955,8 +2951,6 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, hba->dev_cmd.complete = &wait;ufshcd_add_query_upiu_trace (hba,UFS_QUERY_SEND , lrbp->ucd_req_ptr); -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();ufshcd_send_command (hba, tag); err =ufshcd_wait_for_dev_cmd (hba, lrbp, timeout);@@ -6514,9 +6508,6 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba,/* send command to the controller */ __set_bit (task_tag, &hba->outstanding_tasks); -/* Make sure descriptors are ready before ringing the task doorbell */ -wmb (); -ufshcd_writel (hba,1 << task_tag,REG_UTP_TASK_REQ_DOOR_BELL );/* Make sure that doorbell is committed immediately */ wmb ();@@ -6687,8 +6678,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba, hba->dev_cmd.complete = &wait;ufshcd_add_query_upiu_trace (hba,UFS_QUERY_SEND , lrbp->ucd_req_ptr); -/* Make sure descriptors are ready before ringing the doorbell */ -wmb ();ufshcd_send_command (hba, tag);/*
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, Linux Foundation Collaborative Project
Re: [PATCH 13/21] ufs: Remove several wmb() calls
Quoted 2 lines · Asutosh Das (asd)
Did you verify this change? I think we've seen OCS errors which were fixed with the
wmb()in queuecommand.
Hi Asutosh,
Thanks for having taken a look. This patch has been verified against an Exynos UFS controller.
Bart.
PATCH 14/21 ufs: Inline ufshcd_outstanding_req_clear()
In reply to Bart Van AsscheInline ufshcd_outstanding_req_clear() since it only has one caller and since its body is only one line long.
--- drivers/scsi/ufs/ufshcd.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
drivers/scsi/ufs/ufshcd.c +1 -11
@@ -743,16 +743,6 @@ static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos)ufshcd_writel (hba, ~(1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); } -/** -* ufshcd_outstanding_req_clear - Clear a bit in outstanding request field -* @hba: per adapter instance -* @tag: position of the bit to be cleared -*/ -static inline void ufshcd_outstanding_req_clear (struct ufs_hba *hba,int tag) -{ -clear_bit (tag, &hba->outstanding_reqs); -} -/** * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY * @reg: Register value of host controller status
@@ -2898,7 +2888,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,* we also need to clear the outstanding_request * field in hba */ -ufshcd_outstanding_req_clear (hba, lrbp->task_tag); +clear_bit (lrbp->task_tag, &hba->outstanding_reqs); }return err;
RE: [PATCH 14/21] ufs: Inline ufshcd_outstanding_req_clear()
Quoted 10 lines
Inline
ufshcd_outstanding_req_clear()since it only has one caller and since its body is only one line long.Cc Adrian Hunter <[email protected]>Cc Stanley Chu <[email protected]>Cc Can Guo <[email protected]>Cc Asutosh Das <[email protected]>Cc Avri Altman <[email protected]>Signed-off-by Bart Van Assche <[email protected]>
PATCH 15/21 ufs: Rename __ufshcd_transfer_req_compl()
In reply to Bart Van AsscheBefore patch "scsi: ufs: Optimize host lock on transfer requests send/compl paths", the host lock was held around __ufshcd_transfer_req_compl() and the double underscore prefix indicated this. Since the SCSI host lock is no longer held around __ufshcd_transfer_req_compl() calls, remove the double underscore prefix.
--- drivers/scsi/ufs/ufshcd.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/scsi/ufs/ufshcd.c +7 -7
@@ -5180,12 +5180,12 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status) }/** -* __ufshcd_transfer_req_compl - handle SCSI and query command completion +* ufshcd_transfer_req_compl - handle SCSI and query command completion * @hba: per adapter instance * @completed_reqs: requests to complete */ -static void __ufshcd_transfer_req_compl (struct ufs_hba *hba, -unsigned long completed_reqs) +static void ufshcd_transfer_req_compl (struct ufs_hba *hba, +unsigned long completed_reqs) {struct ufshcd_lrb *lrbp;struct scsi_cmnd *cmd;
@@ -5270,7 +5270,7 @@ static irqreturn_t ufshcd_trc_handler(struct ufs_hba *hba, bool use_utrlcnr) }if (completed_reqs) { -__ufshcd_transfer_req_compl (hba, completed_reqs); +ufshcd_transfer_req_compl (hba, completed_reqs);return IRQ_HANDLED ; }else {return IRQ_NONE ;
@@ -6808,7 +6808,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) err =ufshcd_clear_cmd (hba, pos);if (err)break ; -__ufshcd_transfer_req_compl (hba, pos); +ufshcd_transfer_req_compl (hba, pos); } }
@@ -6981,7 +6981,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)*/ if (lrbp->lun ==UFS_UPIU_UFS_DEVICE_WLUN ) {ufshcd_update_evt_hist (hba,UFS_EVT_ABORT , lrbp->lun); -__ufshcd_transfer_req_compl (hba, (1UL << tag)); +ufshcd_transfer_req_compl (hba,1UL << tag);set_bit (tag, &hba->outstanding_reqs);spin_lock_irqsave (host->host_lock, flags); hba->force_reset = true;
@@ -6998,7 +6998,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)if (!err) { cleanup: -__ufshcd_transfer_req_compl (hba, (1UL << tag)); +ufshcd_transfer_req_compl (hba,1UL << tag); out: err =SUCCESS ; }else {
PATCH 16/21 ufs: Fix the SCSI abort handler
In reply to Bart Van AsscheMake the following changes in ufshcd_abort():
- Return FAILED instead of SUCCESS if the abort handler notices that a SCSI command has already been completed. Returning SUCCESS in this case triggers a use-after-free and may trigger a kernel crash.
- Fix the code for aborting SCSI commands submitted to a WLUN.
The current approach for aborting SCSI commands that have been submitted to a WLUN and that timed out is as follows:
- Report to the SCSI core that the command has completed successfully. Let the block layer free any data buffers associated with the command.
- Mark the command as outstanding in 'outstanding_reqs'.
- If the block layer tries to reuse the tag associated with the aborted command, busy-wait until the tag is freed.
This approach can result in:
- Memory corruption if the controller accesses the data buffer after the block layer has freed the associated data buffers.
- A race condition if ufshcd_queuecommand() or ufshcd_exec_dev_cmd() checks the bit that corresponds to an aborted command in 'outstanding_reqs' after it has been cleared and before it is reset.
- High energy consumption if ufshcd_queuecommand() repeatedly returns SCSI_MLQUEUE_HOST_BUSY.
Fix this by reporting to the SCSI error handler that aborting a SCSI command failed if the SCSI command was submitted to a WLUN.
--- drivers/scsi/ufs/ufshcd.c | 57 +++++++++++++-------------------------- 1 file changed, 18 insertions(+), 39 deletions(-)
drivers/scsi/ufs/ufshcd.c +18 -39
@@ -2728,15 +2728,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)WARN_ON (ufshcd_is_clkgating_allowed (hba) && (hba->clk_gating.state !=CLKS_ON )); -if (unlikely (test_bit (tag, &hba->outstanding_reqs))) { -if (hba->pm_op_in_progress) -set_host_byte (cmd,DID_BAD_TARGET ); -else - err =SCSI_MLQUEUE_HOST_BUSY ; -ufshcd_release (hba); - goto out; - } - lrbp = &hba->lrb[tag];WARN_ON (lrbp->cmd); lrbp->cmd = cmd;
@@ -2926,12 +2917,6 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, goto out_unlock; } tag = req->tag; - -if (unlikely (test_bit (tag, &hba->outstanding_reqs))) { - err = -EBUSY ; - goto out; - } - lrbp = &hba->lrb[tag];WARN_ON (lrbp->cmd); err =ufshcd_compose_dev_cmd (hba, lrbp, cmd_type, tag);
@@ -6929,17 +6914,17 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)unsigned int tag = cmd->request->tag;struct ufshcd_lrb *lrbp = &hba->lrb[tag];unsigned long flags; -int err =0 ; +int err =FAILED , res;u32 reg;ufshcd_hold (hba, false); reg =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_DOOR_BELL ); -/* If command is already aborted/completed, return SUCCESS */ +/* If command is already aborted/completed, return FAILED. */ if (!(test_bit (tag, &hba->outstanding_reqs))) {dev_err (hba->dev,"%s: cmd at tag %d already completed, outstanding=0x%lx, doorbell=0x%x\n" , __func__, tag, hba->outstanding_reqs, reg); - goto out; + goto release; }/* Print Transfer Request of aborted task */
@@ -6968,7 +6953,8 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)dev_err (hba->dev,"%s: cmd was completed, but without a notifying intr, tag = %d" , __func__, tag); - goto cleanup; +ufshcd_transfer_req_compl (hba,1UL << tag); + goto release; }/*
@@ -6981,36 +6967,29 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)*/ if (lrbp->lun ==UFS_UPIU_UFS_DEVICE_WLUN ) {ufshcd_update_evt_hist (hba,UFS_EVT_ABORT , lrbp->lun); -ufshcd_transfer_req_compl (hba,1UL << tag); -set_bit (tag, &hba->outstanding_reqs); +spin_lock_irqsave (host->host_lock, flags); hba->force_reset = true;ufshcd_schedule_eh_work (hba);spin_unlock_irqrestore (host->host_lock, flags); - goto out; + goto release; }/* Skip task abort in case previous aborts failed and report failure */ -if (lrbp->req_abort_skip) - err = -EIO ; -else - err =ufshcd_try_to_abort_task (hba, tag); - -if (!err) { -cleanup: -ufshcd_transfer_req_compl (hba,1UL << tag); -out: - err =SUCCESS ; - }else { -dev_err (hba->dev,"%s: failed with err %d\n" , __func__, err); +if (lrbp->req_abort_skip) { +dev_err (hba->dev,"%s: failed\n" , __func__);ufshcd_set_req_abort_skip (hba, hba->outstanding_reqs); - err =FAILED ; + goto release; } -/* -* This ufshcd_release() corresponds to the original scsi cmd that got -* aborted here (as we won't get any IRQ for it). -*/ + res =ufshcd_try_to_abort_task (hba, tag); +if (res) + goto release; + + err =SUCCESS ; + +release: +/* Matches the ufshcd_hold() call at the start of this function. */ ufshcd_release (hba);return err; }
PATCH 17/21 ufs: Fix a race in the completion path
In reply to Bart Van AsscheThe following unlikely races can be triggered by the completion path (ufshcd_trc_handler()):
- After the UTRLCNR register has been read from interrupt context and before it is cleared, the UFS error handler reads the UTRLCNR register. Hold the SCSI host lock until the UTRLCNR register has been cleared to prevent that this register is accessed from another CPU before it has been cleared.
- After the doorbell register has been read and before outstanding_reqs is cleared, the error handler reads the doorbell register. This can also result in double completions. Fix this by clearing outstanding_reqs before calling ufshcd_transfer_req_compl().
Due to this change ufshcd_trc_handler() no longer updates outstanding_reqs atomically. Hence protect all other outstanding_reqs changes with the SCSI host lock.
This patch is a performance improvement because it reduces the number of atomic operations in the hot path (test_and_clear_bit()).
See also commit a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths").
--- drivers/scsi/ufs/ufshcd.c | 47 +++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 26 deletions(-)
drivers/scsi/ufs/ufshcd.c +21 -26
@@ -2088,6 +2088,7 @@ static inlinevoid ufshcd_send_command (struct ufs_hba *hba,unsigned int task_tag) {struct ufshcd_lrb *lrbp = &hba->lrb[task_tag]; +unsigned long flags; lrbp->issue_time_stamp =ktime_get (); lrbp->compl_time_stamp =ktime_set (0 ,0 );
@@ -2096,19 +2097,12 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)ufshcd_clk_scaling_start_busy (hba);if (unlikely (ufshcd_should_inform_monitor (hba, lrbp)))ufshcd_start_monitor (hba, lrbp); -if (ufshcd_has_utrlcnr (hba)) { -set_bit (task_tag, &hba->outstanding_reqs); -ufshcd_writel (hba,1 << task_tag, -REG_UTP_TRANSFER_REQ_DOOR_BELL ); - }else { -unsigned long flags; -spin_lock_irqsave (hba->host->host_lock, flags); -set_bit (task_tag, &hba->outstanding_reqs); -ufshcd_writel (hba,1 << task_tag, -REG_UTP_TRANSFER_REQ_DOOR_BELL ); -spin_unlock_irqrestore (hba->host->host_lock, flags); - } +spin_lock_irqsave (hba->host->host_lock, flags); +__set_bit (task_tag, &hba->outstanding_reqs); +spin_unlock_irqrestore (hba->host->host_lock, flags); + +ufshcd_writel (hba,1 << task_tag,REG_UTP_TRANSFER_REQ_DOOR_BELL );/* Make sure that doorbell is committed immediately */ wmb (); }
@@ -2879,7 +2873,9 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,* we also need to clear the outstanding_request * field in hba */ -clear_bit (lrbp->task_tag, &hba->outstanding_reqs); +spin_lock_irqsave (hba->host->host_lock, flags); +__clear_bit (lrbp->task_tag, &hba->outstanding_reqs); +spin_unlock_irqrestore (hba->host->host_lock, flags); }return err;
@@ -5179,8 +5175,6 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba,bool update_scaling = false;for_each_set_bit (index, &completed_reqs, hba->nutrs) { -if (!test_and_clear_bit (index, &hba->outstanding_reqs)) -continue ; lrbp = &hba->lrb[index]; lrbp->compl_time_stamp =ktime_get (); cmd = lrbp->cmd;
@@ -5223,6 +5217,7 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba,static irqreturn_t ufshcd_trc_handler (struct ufs_hba *hba,bool use_utrlcnr) {unsigned long completed_reqs =0 ; +unsigned long flags;/* Resetting interrupt aggregation counters first and reading the * DOOR_BELL afterward allows us to handle all the completed requests.
@@ -5235,24 +5230,24 @@ static irqreturn_t ufshcd_trc_handler(struct ufs_hba *hba, bool use_utrlcnr) !(hba->quirks & UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR))ufshcd_reset_intr_aggr (hba); +spin_lock_irqsave (hba->host->host_lock, flags);if (use_utrlcnr) { -u32 utrlcnr; - - utrlcnr =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_LIST_COMPL ); -if (utrlcnr) { -ufshcd_writel (hba, utrlcnr, + completed_reqs =ufshcd_readl (hba, +REG_UTP_TRANSFER_REQ_LIST_COMPL ); +if (completed_reqs) +ufshcd_writel (hba, completed_reqs,REG_UTP_TRANSFER_REQ_LIST_COMPL ); - completed_reqs = utrlcnr; - } }else { -unsigned long flags;u32 tr_doorbell; -spin_lock_irqsave (hba->host->host_lock, flags); tr_doorbell =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_DOOR_BELL ); - completed_reqs = tr_doorbell ^ hba->outstanding_reqs; -spin_unlock_irqrestore (hba->host->host_lock, flags); + completed_reqs = ~tr_doorbell & hba->outstanding_reqs; } +WARN_ONCE (completed_reqs & ~hba->outstanding_reqs, +"completed: %#lx; outstanding: %#lx\n" , completed_reqs, + hba->outstanding_reqs); + hba->outstanding_reqs &= ~completed_reqs; +spin_unlock_irqrestore (hba->host->host_lock, flags);if (completed_reqs) {ufshcd_transfer_req_compl (hba, completed_reqs);
PATCH 18/21 ufs: Use the doorbell register instead of the UTRLCNR register
In reply to Bart Van AsscheUsing the UTRLCNR register implies performing two MMIO accesses in the hot path while reading the doorbell register only involves a single MMIO operation. Hence do not use the UTRLNCR register.
--- drivers/scsi/ufs/ufshcd.c | 2 +- drivers/scsi/ufs/ufshcd.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/ufs/ufshcd.c +1 -1
@@ -6370,7 +6370,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) retval |=ufshcd_tmc_handler (hba);if (intr_status &UTP_TRANSFER_REQ_COMPL ) - retval |=ufshcd_trc_handler (hba,ufshcd_has_utrlcnr (hba)); + retval |=ufshcd_trc_handler (hba,ufshcd_use_utrlcnr (hba));return retval; }
drivers/scsi/ufs/ufshcd.h +2 -2
@@ -1184,9 +1184,9 @@ static inline u32 ufshcd_vops_get_ufs_hci_version(struct ufs_hba *hba)return ufshcd_readl (hba,REG_UFS_VERSION ); } -static inline bool ufshcd_has_utrlcnr (struct ufs_hba *hba) +static inline bool ufshcd_use_utrlcnr (struct ufs_hba *hba) { -return (hba->ufs_version >=ufshci_version (3 ,0 )); +return false; } static inline int ufshcd_vops_clk_scale_notify(struct ufs_hba *hba,
PATCH 19/21 ufs: Request sense data asynchronously
In reply to Bart Van AsscheClearing a unit attention synchronously from inside the UFS error handler may trigger the following deadlock:
- ufshcd_err_handler() calls ufshcd_err_handling_unprepare() and the latter function calls ufshcd_clear_ua_wluns().
- ufshcd_clear_ua_wluns() submits a REQUEST SENSE command and that command activates the SCSI error handler.
- The SCSI error handler calls ufshcd_host_reset_and_restore().
- ufshcd_host_reset_and_restore() executes the following code:
ufshcd_schedule_eh_work(hba);
flush_work(&hba->eh_work);
This sequence results in a deadlock (circular wait). Fix this by requesting sense data asynchronously.
--- drivers/scsi/ufs/ufshcd.c | 64 ++++++++++++++++++++------------------- 1 file changed, 33 insertions(+), 31 deletions(-)
drivers/scsi/ufs/ufshcd.c +33 -31
@@ -7815,8 +7815,39 @@ static int ufshcd_add_lus(struct ufs_hba *hba)return ret; } +static void ufshcd_request_sense_done (struct request *rq,blk_status_t error) +{ +if (error !=BLK_STS_OK ) +pr_err ("%s: REQUEST SENSE failed (%d)" , __func__, error); +blk_put_request (rq); +} +static int -ufshcd_send_request_sense (struct ufs_hba *hba,struct scsi_device *sdp); +ufshcd_request_sense_async (struct ufs_hba *hba,struct scsi_device *sdev) +{ +/* +* From SPC-6: the REQUEST SENSE command with any allocation length +* clears the sense data. +*/ +static const u8 cmd[6 ] = {REQUEST_SENSE ,0 ,0 ,0 ,0 ,0 }; +struct scsi_request *rq; +struct request *req; + + req =blk_get_request (sdev->request_queue,REQ_OP_SCSI_IN ,/*flags=*/ 0 ); +if (IS_ERR (req)) +return PTR_ERR (req); + + rq =scsi_req (req); + rq->cmd_len =ARRAY_SIZE (cmd); +memcpy (rq->cmd, cmd, rq->cmd_len); + rq->retries =3 ; + req->timeout =1 *HZ ; + req->rq_flags |=RQF_PM |RQF_QUIET ; + +blk_execute_rq_nowait (/*bd_disk=*/ NULL , req,/*at_head=*/ true, + ufshcd_request_sense_done); +return 0 ; +}static int ufshcd_clear_ua_wlun (struct ufs_hba *hba,u8 wlun) {
@@ -7844,7 +7875,7 @@ static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun)if (ret) goto out_err; - ret =ufshcd_send_request_sense (hba, sdp); + ret =ufshcd_request_sense_async (hba, sdp);scsi_device_put (sdp); out_err:if (ret)
@@ -8439,35 +8470,6 @@ static void ufshcd_hba_exit(struct ufs_hba *hba) } } -static int -ufshcd_send_request_sense (struct ufs_hba *hba,struct scsi_device *sdp) -{ -unsigned char cmd[6 ] = {REQUEST_SENSE , -0 , -0 , -0 , -UFS_SENSE_SIZE , -0 }; -char *buffer; -int ret; - - buffer =kzalloc (UFS_SENSE_SIZE ,GFP_KERNEL ); -if (!buffer) { - ret = -ENOMEM ; - goto out; - } - - ret =scsi_execute (sdp, cmd,DMA_FROM_DEVICE , buffer, -UFS_SENSE_SIZE ,NULL ,NULL , -msecs_to_jiffies (1000 ),3 ,0 ,RQF_PM ,NULL ); -if (ret) -pr_err ("%s: failed with err %d\n" , __func__, ret); - -kfree (buffer); -out: -return ret; -} -/** * ufshcd_set_dev_pwr_mode - sends START STOP UNIT command to set device * power mode
PATCH 20/21 ufs: Synchronize SCSI and UFS error handling
In reply to Bart Van AsscheUse the SCSI error handler instead of a custom error handling strategy. This change reduces the number of potential races in the UFS drivers since the UFS error handler and the SCSI error handler no longer run concurrently.
--- drivers/scsi/ufs/ufshcd.c | 101 ++++++++++++++++++++------------------ drivers/scsi/ufs/ufshcd.h | 4 -- 2 files changed, 54 insertions(+), 51 deletions(-)
drivers/scsi/ufs/ufshcd.c +54 -47
@@ -17,6 +17,8 @@#include <linux/blk-pm.h> #include <linux/blkdev.h> #include <scsi/scsi_driver.h> +#include <scsi/scsi_transport.h> +#include "../scsi_transport_api.h" #include "ufshcd.h" #include "ufs_quirks.h" #include "unipro.h"
@@ -233,7 +235,6 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up);static irqreturn_t ufshcd_intr (int irq,void *__hba);static int ufshcd_change_power_mode (struct ufs_hba *hba,struct ufs_pa_layer_attr *pwr_mode); -static void ufshcd_schedule_eh_work (struct ufs_hba *hba);static int ufshcd_setup_hba_vreg (struct ufs_hba *hba,bool on);static int ufshcd_setup_vreg (struct ufs_hba *hba,bool on); static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
@@ -3897,6 +3898,35 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, }EXPORT_SYMBOL_GPL (ufshcd_dme_get_attr); +static inline bool ufshcd_is_saved_err_fatal (struct ufs_hba *hba) +{ +lockdep_assert_held (hba->host->host_lock); + +return (hba->saved_uic_err &UFSHCD_UIC_DL_PA_INIT_ERROR ) || + (hba->saved_err & (INT_FATAL_ERRORS |UFSHCD_UIC_HIBERN8_MASK )); +} + +static void ufshcd_schedule_eh (struct ufs_hba *hba) +{ +bool schedule_eh = false; +unsigned long flags; + +spin_lock_irqsave (hba->host->host_lock, flags); +/* handle fatal errors only when link is not in error state */ +if (hba->ufshcd_state !=UFSHCD_STATE_ERROR ) { +if (hba->force_reset ||ufshcd_is_link_broken (hba) || +ufshcd_is_saved_err_fatal (hba)) + hba->ufshcd_state =UFSHCD_STATE_EH_SCHEDULED_FATAL ; +else + hba->ufshcd_state =UFSHCD_STATE_EH_SCHEDULED_NON_FATAL ; + schedule_eh = true; + } +spin_unlock_irqrestore (hba->host->host_lock, flags); + +if (schedule_eh) +scsi_schedule_eh (hba->host); +} +/** * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power * state) and waits for it to take effect.
@@ -3917,6 +3947,7 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) {DECLARE_COMPLETION_ONSTACK (uic_async_done);unsigned long flags; +bool schedule_eh = false;u8 status;int ret;bool reenable_intr = false;
@@ -3986,10 +4017,14 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)ufshcd_enable_intr (hba,UIC_COMMAND_COMPL );if (ret) {ufshcd_set_link_broken (hba); -ufshcd_schedule_eh_work (hba); + schedule_eh = true; } + out_unlock:spin_unlock_irqrestore (hba->host->host_lock, flags); + +if (schedule_eh) +ufshcd_schedule_eh (hba);mutex_unlock (&hba->uic_cmd_mutex);return ret;
@@ -5804,27 +5839,6 @@ static bool ufshcd_quirk_dl_nac_errors(struct ufs_hba *hba)return err_handling; } -/* host lock must be held before calling this func */ -static inline bool ufshcd_is_saved_err_fatal (struct ufs_hba *hba) -{ -return (hba->saved_uic_err &UFSHCD_UIC_DL_PA_INIT_ERROR ) || - (hba->saved_err & (INT_FATAL_ERRORS |UFSHCD_UIC_HIBERN8_MASK )); -} - -/* host lock must be held before calling this func */ -static inline void ufshcd_schedule_eh_work (struct ufs_hba *hba) -{ -/* handle fatal errors only when link is not in error state */ -if (hba->ufshcd_state !=UFSHCD_STATE_ERROR ) { -if (hba->force_reset ||ufshcd_is_link_broken (hba) || -ufshcd_is_saved_err_fatal (hba)) - hba->ufshcd_state =UFSHCD_STATE_EH_SCHEDULED_FATAL ; -else - hba->ufshcd_state =UFSHCD_STATE_EH_SCHEDULED_NON_FATAL ; -queue_work (hba->eh_wq, &hba->eh_work); - } -} -static void ufshcd_clk_scaling_allow (struct ufs_hba *hba,bool allow) {down_write (&hba->clk_scaling_lock);
@@ -5958,11 +5972,11 @@ static bool ufshcd_is_pwr_mode_restore_needed(struct ufs_hba *hba)/** * ufshcd_err_handler - handle UFS errors that require s/w attention -* @work: pointer to work structure +* @host: SCSI host pointer */ -static void ufshcd_err_handler (struct work_struct *work) +static void ufshcd_err_handler (struct Scsi_Host *host) { -struct ufs_hba *hba; +struct ufs_hba *hba =shost_priv (host);unsigned long flags;bool err_xfer = false;bool err_tm = false;
@@ -5970,8 +5984,6 @@ static void ufshcd_err_handler(struct work_struct *work)int tag;bool needs_reset = false, needs_restore = false; - hba = container_of(work, struct ufs_hba, eh_work); -down (&hba->host_sem);spin_lock_irqsave (hba->host->host_lock, flags);if (ufshcd_err_handling_should_stop (hba)) {
@@ -6287,7 +6299,6 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) "host_regs: ");ufshcd_print_pwr_info (hba); } -ufshcd_schedule_eh_work (hba); retval |=IRQ_HANDLED ; }/*
@@ -6299,6 +6310,10 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) hba->errors =0 ; hba->uic_error =0 ;spin_unlock (hba->host->host_lock); + +if (queue_eh_work) +ufshcd_schedule_eh (hba); +return retval; }
@@ -6958,15 +6973,17 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)* will be to send LU reset which, again, is a spec violation. * To avoid these unnecessary/illegal steps, first we clean up * the lrb taken by this cmd and re-set it in outstanding_reqs, -* then queue the eh_work and bail. +* then queue the error handler and bail. */ if (lrbp->lun ==UFS_UPIU_UFS_DEVICE_WLUN ) {ufshcd_update_evt_hist (hba,UFS_EVT_ABORT , lrbp->lun);spin_lock_irqsave (host->host_lock, flags); hba->force_reset = true; -ufshcd_schedule_eh_work (hba);spin_unlock_irqrestore (host->host_lock, flags); + +ufshcd_schedule_eh (hba); + goto release; }
@@ -7094,11 +7111,10 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd)spin_lock_irqsave (hba->host->host_lock, flags); hba->force_reset = true; -ufshcd_schedule_eh_work (hba);dev_err (hba->dev,"%s: reset in progress - 1\n" , __func__);spin_unlock_irqrestore (hba->host->host_lock, flags); -flush_work (&hba->eh_work); +ufshcd_err_handler (hba->host);spin_lock_irqsave (hba->host->host_lock, flags);if (hba->ufshcd_state ==UFSHCD_STATE_ERROR )
@@ -8458,8 +8474,6 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)if (hba->is_powered) {ufshcd_exit_clk_scaling (hba);ufshcd_exit_clk_gating (hba); -if (hba->eh_wq) -destroy_workqueue (hba->eh_wq);ufs_debugfs_hba_exit (hba);ufshcd_variant_hba_exit (hba);ufshcd_setup_vreg (hba, false);
@@ -9298,6 +9312,10 @@ static int ufshcd_set_dma_mask(struct ufs_hba *hba)return dma_set_mask_and_coherent (hba->dev,DMA_BIT_MASK (32 )); } +static struct scsi_transport_template ufshcd_transport_template = { + .eh_strategy_handler = ufshcd_err_handler, +}; +/** * ufshcd_alloc_host - allocate Host Bus Adapter (HBA) * @dev: pointer to device handle
@@ -9324,6 +9342,7 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) err = -ENOMEM ; goto out_error; } + host->transportt = &ufshcd_transport_template; hba =shost_priv (host); hba->host = host; hba->dev = dev;
@@ -9361,7 +9380,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)int err;struct Scsi_Host *host = hba->host;struct device *dev = hba->dev; -char eh_wq_name[sizeof ("ufs_eh_wq_00" )];if (!mmio_base) { dev_err(hba->dev,
@@ -9415,17 +9433,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) hba->max_pwr_info.is_valid = false; -/* Initialize work queues */ -snprintf (eh_wq_name,sizeof (eh_wq_name),"ufs_eh_wq_%d" , - hba->host->host_no); - hba->eh_wq =create_singlethread_workqueue (eh_wq_name); -if (!hba->eh_wq) { -dev_err (hba->dev,"%s: failed to create eh workqueue\n" , - __func__); - err = -ENOMEM ; - goto out_disable; - } -INIT_WORK (&hba->eh_work, ufshcd_err_handler);INIT_WORK (&hba->eeh_work, ufshcd_exception_event_handler);sema_init (&hba->host_sem,1 );
drivers/scsi/ufs/ufshcd.h +0 -4
@@ -715,8 +715,6 @@ struct ufs_hba_monitor {* @is_powered: flag to check if HBA is powered * @shutting_down: flag to check if shutdown has been invoked * @host_sem: semaphore used to serialize concurrent contexts -* @eh_wq: Workqueue that eh_work works on -* @eh_work: Worker to handle UFS errors that require s/w attention * @eeh_work: Worker to handle exception events * @errors: HBA errors * @uic_error: UFS interconnect layer error status
@@ -818,8 +816,6 @@ struct ufs_hba {struct semaphore host_sem;/* Work Queues */ -struct workqueue_struct *eh_wq; -struct work_struct eh_work;struct work_struct eeh_work;/* HBA Errors */
PATCH 21/21 ufs: Retry aborted SCSI commands instead of completing these successfully
In reply to Bart Van AsscheNeither SAM nor the UFS standard require that the UFS controller fills in the completion status of commands that have been aborted (LUN RESET aborts pending commands). Hence do not rely on the completion status provided by the UFS controller for aborted commands but instead ask the SCSI core to retry SCSI commands that have been aborted.
--- drivers/scsi/ufs/ufshcd.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-)
drivers/scsi/ufs/ufshcd.c +26 -12
@@ -5198,10 +5198,12 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)/** * ufshcd_transfer_req_compl - handle SCSI and query command completion * @hba: per adapter instance -* @completed_reqs: requests to complete +* @completed_reqs: bitmask that indicates which requests to complete +* @retry_requests: whether to ask the SCSI core to retry completed requests */ static void ufshcd_transfer_req_compl (struct ufs_hba *hba, -unsigned long completed_reqs) +unsigned long completed_reqs, +bool retry_requests) {struct ufshcd_lrb *lrbp;struct scsi_cmnd *cmd;
@@ -5217,7 +5219,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba,if (unlikely (ufshcd_should_inform_monitor (hba, lrbp)))ufshcd_update_monitor (hba, lrbp);ufshcd_add_command_trace (hba, index,UFS_CMD_COMP ); - result =ufshcd_transfer_rsp_status (hba, lrbp); + result = retry_requests ?DID_BUS_BUSY <<16 : +ufshcd_transfer_rsp_status (hba, lrbp);scsi_dma_unmap (cmd); cmd->result = result;/* Mark completed command as NULL in LRB */
@@ -5243,13 +5246,15 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba,/** * ufshcd_trc_handler - handle transfer requests completion * @hba: per adapter instance +* @retry_requests: whether or not to ask to retry requests * @use_utrlcnr: get completed requests from UTRLCNR * * Returns * IRQ_HANDLED - If interrupt is valid * IRQ_NONE - If invalid interrupt */ -static irqreturn_t ufshcd_trc_handler (struct ufs_hba *hba,bool use_utrlcnr) +static irqreturn_t ufshcd_trc_handler (struct ufs_hba *hba,bool retry_requests, +bool use_utrlcnr) {unsigned long completed_reqs =0 ;unsigned long flags;
@@ -5285,7 +5290,7 @@ static irqreturn_t ufshcd_trc_handler(struct ufs_hba *hba, bool use_utrlcnr)spin_unlock_irqrestore (hba->host->host_lock, flags);if (completed_reqs) { -ufshcd_transfer_req_compl (hba, completed_reqs); +ufshcd_transfer_req_compl (hba, completed_reqs, retry_requests);return IRQ_HANDLED ; }else {return IRQ_NONE ;
@@ -5764,7 +5769,14 @@ static void ufshcd_exception_event_handler(struct work_struct *work)/* Complete requests that have door-bell cleared */ static void ufshcd_complete_requests (struct ufs_hba *hba) { -ufshcd_trc_handler (hba, false); +ufshcd_trc_handler (hba,/*retry_requests=*/ false, +/*use_utrlcnr=*/ false); +ufshcd_tmc_handler (hba); +} + +static void ufshcd_retry_aborted_requests (struct ufs_hba *hba) +{ +ufshcd_trc_handler (hba,/*retry_requests=*/ true,/*use_utrlcnr=*/ false);ufshcd_tmc_handler (hba); }
@@ -6083,8 +6095,7 @@ static void ufshcd_err_handler(struct Scsi_Host *host) } lock_skip_pending_xfer_clear: -/* Complete the requests that are cleared by s/w */ -ufshcd_complete_requests (hba); +ufshcd_retry_aborted_requests (hba);spin_lock_irqsave (hba->host->host_lock, flags); hba->silence_err_logs = false;
@@ -6385,7 +6396,8 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) retval |=ufshcd_tmc_handler (hba);if (intr_status &UTP_TRANSFER_REQ_COMPL ) - retval |=ufshcd_trc_handler (hba,ufshcd_use_utrlcnr (hba)); + retval |=ufshcd_trc_handler (hba,/*retry_requests=*/ false, +ufshcd_use_utrlcnr (hba));return retval; }
@@ -6803,7 +6815,8 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) err =ufshcd_clear_cmd (hba, pos);if (err)break ; -ufshcd_transfer_req_compl (hba, pos); +ufshcd_transfer_req_compl (hba, pos, +/*retry_requests=*/ true); } }
@@ -6963,7 +6976,8 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)dev_err (hba->dev,"%s: cmd was completed, but without a notifying intr, tag = %d" , __func__, tag); -ufshcd_transfer_req_compl (hba,1UL << tag); +ufshcd_transfer_req_compl (hba,1UL << tag, +/*retry_requests=*/ false); goto release; }
@@ -7026,7 +7040,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)*/ ufshcd_hba_stop (hba); hba->silence_err_logs = true; -ufshcd_complete_requests (hba); +ufshcd_retry_aborted_requests (hba); hba->silence_err_logs = false;/* scale up clocks to max frequency before full reinitialization */