arm: imx: Fix spl imx romapi for imx8mn
Subsystems (3)
PATCH 1/1 arm: imx: Fix spl imx romapi for imx8mn
We experimenting problems with imx8mn family cpu. We try to support boot0 and boot1 fallback.
The condition to decide what function the bootrom should choose come from is_boot_from_stream_device
This is a boot from mmcblk0boot0 with some debug
U-Boot SPL 2020.04-5.4.70-2.3.2+gf3bcbdfc62 (Jul 03 2021 - 17:00:27 +0000) power_bd71837_init
DDRINFO: start DRAM init
DDRINFO: DRAM rate 1600MTS
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Trying to boot from BOOTROM
ROM API interface 2 from boot 131073
Interface is 2 MMC and boot is 131073 and according to this
static int is_boot_from_stream_device(u32 boot)
+{
+ u32 interface;
+
+ interface = boot >> 16;
+ if (interface >= BT_DEV_TYPE_USB)
+ return 1;
+
+ if (interface == BT_DEV_TYPE_MMC && (boot & 1))
+ return 1;
+
+ return 0;
+}
the return is 1, that does not allow us to boot.
Boot from boot1 give 131072 that is boot1 this let device boot because is_boot_from_stream_device is 0 and
romapi use spl_romapi_load_image_seekable
Adjust the bootcondition let us boot from mmcblk0boot0 and mmcblk0boot1 without any problem
mmc partconf 0
EXT_CSD[179], PARTITION_CONFIG:BOOT_ACK: 0x0BOOT_PARTITION_ENABLE: 0x1PARTITION_ACCESS: 0x0
and the board was fused already.
--- arch/arm/mach-imx/spl_imx_romapi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-imx/spl_imx_romapi.c +2 -1
@@ -18,10 +18,11 @@ static int is_boot_from_stream_device(u32 boot)u32 interface; interface = boot >>16 ; +if (interface >=BT_DEV_TYPE_USB )return 1 ; -if (interface ==BT_DEV_TYPE_MMC && (boot &1 )) +if (!is_imx8mn () && interface ==BT_DEV_TYPE_MMC && (boot &1 ))return 1 ;return 0 ;
Signature · 1 line
2.25.1